DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.

21

)))

22

23

(((

24

The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

)))

(((

The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.

)))

(((

DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.

)))

(((

DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.

37

38

DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures

)))

(((

DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.

)))

(((

DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

)))

(((

Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

)))

[[image:image-20230522092934-2.png||height="346" width="774"]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

61

* Ultra-low power consumption

62

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

63

* Door Open/Close detect

64

* Door open/close statistics

65

* Datalog Feature, Open Alarm Feature

66

* Support Bluetooth v5.1 and LoRaWAN remote configure

67

* Support wireless OTA update firmware

68

* Uplink on periodically

69

* Downlink to change configure

70

* 8500mAh Battery for long term use

* Wall Mountable

* Outdoor Use

== 1.3 Specification ==

76

77

78

(% style="color:#037691" %)**Common DC Characteristics:**

79

80

* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v

81

* Operating Temperature: -40 ~~ 85°C

82

83

(% style="color:#037691" %)**Sensor Detect Distance:**

84

85

* Wood Door: 10mm ~~ 30mm

86

* Iron Door: 30 ~~ 45mm

87

88

(% style="color:#037691" %)**LoRa Spec:**

89

90

* Frequency Range, Band 1 (HF): 862 ~~ 1020 Mhz

91

* Max +22 dBm constant RF output vs.

92

* RX sensitivity: down to -139 dBm.

93

* Excellent blocking immunity

94

95

(% style="color:#037691" %)**Battery:**

96

97

* Li/SOCI2 un-chargeable battery

98

* Capacity: 8500mAh

99

* Self-Discharge: <1% / Year @ 25°C

100

* Max continuously current: 130mA

101

* Max boost current: 2A, 1 second

102

103

(% style="color:#037691" %)**Power Consumption**

104

105

* Sleep Mode: 5uA @ 3.3v

106

* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

107

108

109

== 1.4 Applications ==

110

111

112

[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]

113

114

115

== 1.5 Sleep mode and working mode ==

116

117

118

(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.

119

120

(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.

121

122

123

== 1.6 Button & LEDs ==

124

125

126

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]

127

128

129

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

130

|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**

131

|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((

132

If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.

133

Meanwhile, BLE module will be active and user can connect via BLE to configure device.

134

)))

135

|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((

136

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.

137

(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

138

Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.

139

)))

140

|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.

141

142

143

== 1.7 BLE connection ==

144

145

146

D2x-LB support BLE remote configure.

147

148

149

BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:

150

151

* Press button to send an uplink

152

* Press button to active device.

153

* Device Power on or reset.

154

155

If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.

== 1.8 Mechanical ==

[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]

162

163

164

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]

165

166

167

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]

168

169

170

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]

171

172

173

= 2. Configure DS03A-LB to connect to LoRaWAN network =

174

175

== 2.1 How it works ==

176

177

178

The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

179

180

181

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

182

183

184

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)

185

186

The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

187

188

[[image:image-20230522092858-1.png||height="391" width="874"]]

189

190

191

(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.

192

193

Each DS03A-LB is shipped with a sticker with the default device EUI as below:

194

195

[[image:image-20230426085205-1.png||height="238" width="512"]]

196

197

198

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

199

200

(% style="display:none" %) (%%)

201

202

(% style="color:blue" %)**Register the device**

203

204

205

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)

206

207

208

(% style="color:blue" %)**Add APP EUI and DEV EUI**

209

210

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]

211

212

213

(% style="color:blue" %)**Add APP EUI in the application**

214

215

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]

216

217

218

(% style="color:blue" %)**Add APP KEY**

219

220

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]

221

222

223

(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB

224

225

226

Press the button for 5 seconds to activate the DS03A-LB.

227

228

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

229

230

After join success, it will start to upload messages to TTN and you can see the messages in the panel.

231

232

233

== 2.3 Uplink Payload ==

234

235

=== 2.3.1 Device Status, FPORT~=5 ===

236

237

Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.

238

239

The Payload format is as below.

240

241

242

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

243

|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**

Example parse in TTNv3

248

249

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/image-20230415153147-2.png?rev=1.1||alt="图片-20230415153147-2.png" height="209" width="1063"]]

250

251

252

(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x0B

253

254

(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version

255

256

(% style="color:#037691" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

*0x0b: CN470

*0x0c: EU433

*0x0d: KR920

*0x0e: MA869

(% style="color:#037691" %)**Sub-Band**:

288

289

AU915 and US915:value 0x00 ~~ 0x08

290

291

CN470: value 0x0B ~~ 0x0C

292

293

Other Bands: Always 0x00

294

295

296

(% style="color:#037691" %)**Battery Info**:

297

298

Check the battery voltage.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 Real-Time Open/Close Status, Uplink FPORT~=2 ===

306

307

308

DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:

309

310

* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].

311

* There is an Open/Close event. (This info can be disabled by AT+DISALARM=1)

312

313

Uplink Payload totals 11 bytes.

314

315

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

316

|=(% colspan="5" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 522px;" %)**Real-Time Open/Close Status, FPORT=2**

317

318

|(% style="width:95px" %)**Value**|(% style="width:78px" %)Status & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]|(% style="width:98px" %)Total open door events|(% style="width:144px" %)(((

319

The last door open duration (unit: min)

320

)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]

321

322

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:518.818px" %)

323

|=(% colspan="4" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 516px;" %)**Status & Alarm field**

324

|(% style="width:76px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:240px" %)**1**|(% style="width:130px" %)**1**

325

|(% style="width:76px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:240px" %)[[Enable/disable Timeout Alarm>>||anchor="H3.3.3A0Enable2FDisableAlarm"]]

326

0: No Alarm; 1: Alarm|(% style="width:130px" %)Status

327

0: Close, 1: Open

328

329

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110547-6.png?width=1191&height=337&rev=1.1||alt="image-20220609110547-6.png" height="337" width="1191"]]

330

331

332

=== 2.3.3 Historical Door Open/Close Event, FPORT~=3 ===

333

334

335

DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].

336

337

The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.

338

339

* (((

340

Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.

341

)))

342

343

For example, in the US915 band, the max payload for different DR is:

344

345

1. (((

346

**DR0**: max is 11 bytes so one entry of data

347

)))

348

1. (((

349

**DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

350

)))

351

1. (((

352

**DR2**: total payload includes 11 entries of data

353

)))

354

1. (((

355

**DR3**: total payload includes 22 entries of data.

356

)))

357

358

If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0

359

360

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609112215-7.png?width=1250&height=277&rev=1.1||alt="image-20220609112215-7.png" height="277" width="1250"]]

**Downlink:**

0x31 61 8E 57 40 61 8E 81 70 05

**Uplink:**

00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50

**Parsed Value:**

[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]

375

376

377

[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],

378

379

[FALSE, OPEN, 1, 0, 2021-11-12 12:36:34],

380

381

[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],

382

383

[FALSE, OPEN, 2, 2, 2021-11-12 12:39:17],

384

385

[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],

386

387

[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],

388

389

[FALSE, OPEN, 3, 1, 2021-11-12 14:50:32],

390

391

[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],

392

393

[FALSE, OPEN, 4, 2, 2021-11-12 14:58:35],

394

395

[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],

396

397

398

=== 2.3.4 Sensor Configuration, FPORT~=4 ===

399

400

401

DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.

402

403

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

404

|(% colspan="5" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**

* (((

(% style="color:blue" %)**TDC: (default: 0x001C20)**

410

)))

411

412

Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.

* (((

(% style="color:blue" %)**Disalarm: (default: 0)**

417

)))

418

419

**If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.

420

421

**If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.

422

423

424

(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **

* (((

(% style="color:blue" %)**Keep Status & Keep Time**

429

)))

430

431

Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]

432

433

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110018-4.png?width=1159&height=291&rev=1.1||alt="image-20220609110018-4.png" height="291" width="1159"]]

434

435

436

== 2.4 Payload Decoder file ==

(((

In TTN, use can add a custom payload so it shows friendly.

)))

(((

In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

)))

== 2.5 Datalog Feature ==

449

450

451

(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.

452

453

454

=== 2.5.1 Ways to get datalog via LoRaWAN ===

455

456

457

Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.

458

459

* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.

460

* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.

461

462

Below is the typical case for the Datalog Feature (Set PNACKMD=1)

463

464

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]

465

466

467

=== 2.5.2 Unix TimeStamp ===

468

469

470

DS03A-LB uses Unix TimeStamp format based on

471

472

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]

473

474

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :

475

476

Below is the converter example

477

478

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]

479

480

So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25

481

482

483

=== 2.5.3 Set Device Time ===

484

485

486

User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.

487

488

Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).

489

490

(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**

491

492

493

== 2.6 Show Data in DataCake IoT Server ==

494

495

496

Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

497

498

499

(% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]

500

501

(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**

502

503

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]

504

505

506

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]

507

508

509

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]

510

511

512

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]

513

514

515

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]

516

517

518

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]

519

520

521

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]

522

523

524

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]

525

526

527

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]

528

529

530

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]

531

532

533

== 2.7 Frequency Plans ==

534

535

536

The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

537

538

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]

539

540

541

== 2.8 Firmware Change Log ==

542

543

544

**Firmware download link:**

545

546

[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]

547

548

549

= 3. Configure DS03A-LB =

550

551

== 3.1 Configure Methods: ==

552

553

554

DS03A-LB supports below configure method:

555

556

* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].

557

* AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].

558

* LoRaWAN Downlink. Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.

559

560

561

== 3.2 General Commands ==

562

563

These commands are to configure:

564

565

* General system settings like: uplink interval.

566

* LoRaWAN protocol & radio related command.

567

568

They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:

569

570

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]

571

572

573

== 3.3 Commands special design for DS03A-LB ==

574

575

576

These commands only valid for DS03A-LB, as below:

577

578

579

=== 3.3.1 Set Transmit Interval Time ===

580

581

582

Feature: Change LoRaWAN End Node Transmit Interval.

583

584

(% style="color:blue" %)**AT Command: AT+TDC**

585

586

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

587

|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**

588

|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((

589

30000

590

OK

591

the interval is 30000ms = 30s

592

)))

593

|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((

594

OK

595

Set transmit interval to 60000ms = 60 seconds

596

)))

597

598

(% style="color:blue" %)**Downlink Command: 0x01**

599

600

Format: Command Code (0x01) followed by 3 bytes time value.

601

602

If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.

603

604

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

605

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

606

607

608

=== 3.3.2 Get Device Status ===

609

610

611

Send a LoRaWAN downlink to ask device send Alarm settings.

612

613

* (% style="color:blue" %)**Downlink Payload: **(%%)0x26 01

614

615

Sensor will upload Device Status via FPORT=5. See payload section for detail.

616

617

618

=== 3.3.3 Enable / Disable Alarm ===

619

620

621

Feature: Enable/Disable Alarm for open/close event. Default value 0.

622

623

(% style="color:blue" %)**AT Command: **

624

625

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

626

|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**

627

|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK

628

|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK

629

630

(% style="color:blue" %)**Downlink Command: **

631

632

0xA7 01 ~/~/ Same As AT+DISALARM=1

633

634

0xA7 00 ~/~/ Same As AT+DISALARM=0

635

636

637

=== 3.3.4 Alarm Base on Timeout ===

638

639

640

DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:

* (((

(% style="color:blue" %)**Keep Status: Status to be monitor**

645

)))

646

647

(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event

648

649

(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event

* (((

(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**

654

)))

655

656

Range 0 ~~ 65535(0xFFFF) seconds.

657

658

If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.

659

660

If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.

661

662

663

(% style="color:blue" %)**AT Command to configure:**

664

665

* (((

666

(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

(% style="color:#037691" %)**AT+TTRIG=0,0** (%%) **~-~-> ** Default Value, disable timeout Alarm.

671

)))

672

673

(% style="color:blue" %)**Downlink Command to configure:**

674

675

(% style="color:#037691" %)**Command: 0xA9 aa bb cc**

676

677

**A9:** Command Type Code

678

679

**aa:** status to be monitored

**bb cc:** timeout.

If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30

Or

0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.

689

690

691

=== 3.3.5 Count Mod ===

692

693

694

(% style="color:blue" %)**AT Command:**

695

696

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

697

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**

698

|(% style="width:155px" %)(((

699

AT+COUNTMOD=0

700

)))|(% style="width:277px" %)(((

701

the count value keeps accumulating mode

702

)))|(% style="width:86px" %)(((

703

OK

704

)))

705

|(% style="width:155px" %)(((

706

AT+COUNTMOD=1

707

)))|(% style="width:277px" %)(((

708

the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）

709

)))|(% style="width:86px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

714

715

Example: 0B aa => AT+COUNTMOD = second byte

716

717

718

=== 3.3.6 Interrupt Pin Channel Mod ===

719

720

721

(% style="color:blue" %)**AT Command:**

722

723

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

724

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**

725

|(% style="width:155px" %)(((

726

AT+TTRCHANNEL=1

727

)))|(% style="width:288px" %)(((

728

set as single channel, only use PB14 pin as interrupt pin.

729

)))|(% style="width:44px" %)(((

730

OK

731

)))

732

|(% style="width:155px" %)(((

733

AT+TTRCHANNEL=2

734

)))|(% style="width:288px" %)(((

735

is set as dual channel, use PB14 pin and PB15 pin as interrupt pin.

736

)))|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

741

742

Example: 0D aa => AT+TTRCHANNEL = second byte

743

744

745

=== 3.3.7 Change the name of AT+TTRIG to AT+TTRIG1 ===

746

747

748

(% style="color:blue" %)**Downlink Command:**

749

750

Example: A9 01 aa bb cc => AT+TTRIG1= third byte, 4th byte and 5th byte

751

752

753

=== 3.3.8 Added AT+TTRIG2 for PB15 pin ===

754

755

756

(% style="color:blue" %)**Downlink Command:**

757

758

Example: A9 02 aa bb cc => AT+TTRIG2= third byte, 4th byte and 5th byte

759

760

761

=== 3.3.9 TTRIG1/2 timeout status alarm ===

762

763

764

It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.

765

766

(% style="color:blue" %)**AT Command:**

767

768

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

769

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**

770

|(% style="width:155px" %)(((

771

AT+TTRALARM=0

772

)))|(% style="width:279px" %)(((

773

disable continuous alarm

774

)))|(% style="width:84px" %)(((

775

OK

776

)))

777

|(% style="width:155px" %)(((

778

AT+TTRALARM=60

779

)))|(% style="width:279px" %)(((

780

The alarm interval is 60 minutes (unit: minutes)

781

)))|(% style="width:84px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

786

787

Example: 0C aa => AT+TTRALARM= aa

788

789

790

=== 3.3.10 Select counting mode ===

791

792

793

(% style="color:blue" %)**AT+TTRMODx=a,b**

794

795

When (% style="color:#037691" %)**a=0**(%%), the door is opened to count, and when (% style="color:#037691" %)**a=1**(%%),the closed door is counted.

796

797

When (% style="color:#037691" %)**b=0**(%%), it is the last door open duration, and when (% style="color:#037691" %)**b=1**(%%),the last door close duration.

798

799

(% style="color:blue" %)**AT Command:**

800

801

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

802

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 278px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 77px;background-color:#D9E2F3;color:#0070C0" %)**Response**

803

|(% style="width:155px" %)(((

804

AT+TTRMODx=1,0

805

)))|(% style="width:278px" %)Door closed count and record the last door opened duration|(% style="width:85px" %)(((

806

OK

807

)))

808

|(% style="width:155px" %)(((

809

AT+TTRMODx=0,1

810

)))|(% style="width:278px" %)(((

811

Door opened count and record the last door Door Door open closed duration

812

)))|(% style="width:85px" %)(((

OK

)))

= 4. Battery & Power Consumption =

818

819

820

DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.

821

822

[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .

823

824

825

= 5. OTA firmware update =

826

827

828

User can change firmware DS03A-LB to:

829

830

* Change Frequency band/ region.

831

* Update with new features.

832

* Fix bugs.

833

834

Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**

835

836

837

Methods to Update Firmware:

838

839

* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]

840

* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.

= 6. FAQ =

= 7. Order Info =

Part Number: (% style="color:blue" %)**DS03A-LB-XX**

851

852

(% style="color:red" %)**XX**(%%): The default frequency band

853

854

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

855

856

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

857

858

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

859

860

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

861

862

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

863

864

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

865

866

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

867

868

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 8. Packing Info =

(% style="color:#037691" %)**Package Includes**:

875

876

* DS03A-LB LoRaWAN Temperature Sensor

877

878

(% style="color:#037691" %)**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

893

894

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

Wiki source code of DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

Applications

Navigation