DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.

21

)))

22

23

(((

24

The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

)))

(((

The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.

)))

(((

DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.

)))

(((

DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.

37

38

DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures

)))

(((

DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.

)))

(((

DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

)))

(((

Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

)))

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

57

* Ultra-low power consumption

58

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

59

* Door Open/Close detect

60

* Door open/close statistics

61

* Datalog Feature, Open Alarm Feature

62

* Support Bluetooth v5.1 and LoRaWAN remote configure

63

* Support wireless OTA update firmware

64

* Uplink on periodically

65

* Downlink to change configure

66

* 8500mAh Battery for long term use

* Wall Mountable

* Outdoor Use

== 1.3 Specification ==

71

72

(% style="color:#037691" %)**Common DC Characteristics:**

73

74

* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v

75

* Operating Temperature: -40 ~~ 85°C

76

77

(% style="color:#037691" %)**Sensor Detect Distance:**

78

79

* Wood Door: 10mm ~~ 30mm

80

* Iron Door: 30 ~~ 45mm

81

82

(% style="color:#037691" %)**LoRa Spec:**

83

84

* Frequency Range, Band 1 (HF): 862 ~~ 1020 Mhz

85

* Max +22 dBm constant RF output vs.

86

* RX sensitivity: down to -139 dBm.

87

* Excellent blocking immunity

88

89

(% style="color:#037691" %)**Battery:**

90

91

* Li/SOCI2 un-chargeable battery

92

* Capacity: 8500mAh

93

* Self-Discharge: <1% / Year @ 25°C

94

* Max continuously current: 130mA

95

* Max boost current: 2A, 1 second

96

97

(% style="color:#037691" %)**Power Consumption**

98

99

* Sleep Mode: 5uA @ 3.3v

100

* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

101

102

== 1.4 Applications ==

103

104

[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]

105

106

107

== 1.5 Sleep mode and working mode ==

108

109

110

(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.

111

112

(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.

113

114

115

== 1.6 Button & LEDs ==

116

117

118

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]

119

120

121

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

122

|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**

123

|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((

124

If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.

125

Meanwhile, BLE module will be active and user can connect via BLE to configure device.

126

)))

127

|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((

128

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.

129

(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

130

Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.

131

)))

132

|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.

133

134

== 1.7 BLE connection ==

135

136

137

D2x-LB support BLE remote configure.

138

139

140

BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:

141

142

* Press button to send an uplink

143

* Press button to active device.

144

* Device Power on or reset.

145

146

If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.

== 1.8 Mechanical ==

[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]

153

154

155

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]

156

157

158

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]

159

160

161

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]

162

163

164

= 2. Configure DS03A-LB to connect to LoRaWAN network =

165

166

== 2.1 How it works ==

167

168

169

The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

170

171

172

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

173

174

175

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)

176

177

The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

178

179

180

(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.

181

182

Each DS03A-LB is shipped with a sticker with the default device EUI as below:

183

184

[[image:image-20230426085205-1.png||height="238" width="512"]]

185

186

187

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

188

189

(% style="display:none" %) (%%)

190

191

(% style="color:blue" %)**Register the device**

192

193

194

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)

195

196

197

(% style="color:blue" %)**Add APP EUI and DEV EUI**

198

199

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]

200

201

202

(% style="color:blue" %)**Add APP EUI in the application**

203

204

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]

205

206

207

(% style="color:blue" %)**Add APP KEY**

208

209

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]

210

211

212

(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB

213

214

215

Press the button for 5 seconds to activate the DS03A-LB.

216

217

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

218

219

After join success, it will start to upload messages to TTN and you can see the messages in the panel.

220

221

222

== 2.3 Uplink Payload ==

223

224

=== 2.3.1 Device Status, FPORT~=5 ===

225

226

Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.

227

228

The Payload format is as below.

229

230

231

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

232

|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**

Example parse in TTNv3

237

238

[[image:image-20230415153147-2.png||height="220" width="1120"]]

239

240

241

(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x0B

242

243

(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version

244

245

(% style="color:#037691" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

*0x0b: CN470

*0x0c: EU433

*0x0d: KR920

*0x0e: MA869

(% style="color:#037691" %)**Sub-Band**:

277

278

AU915 and US915:value 0x00 ~~ 0x08

279

280

CN470: value 0x0B ~~ 0x0C

281

282

Other Bands: Always 0x00

283

284

285

(% style="color:#037691" %)**Battery Info**:

286

287

Check the battery voltage.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 Real-Time Open/Close Status, Uplink FPORT~=2 ===

295

296

297

DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:

298

299

* Every 2 hours, this interval [[can be changed>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.1A0SetTransmitIntervalTime]].

300

* There is an Open/Close event. (This info can be disabled by AT+DISALARM=1)

301

302

Uplink Payload totals 11 bytes.

303

304

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

305

|=(% colspan="5" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 522px;" %)**Real-Time Open/Close Status, FPORT=2**

306

307

|(% style="width:95px" %)**Value**|(% style="width:78px" %)Status & [[Alarm>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]|(% style="width:98px" %)Total open door events|(% style="width:144px" %)(((

308

The last door open duration (unit: min)

309

)))|(% style="width:108px" %)[[Unix TimeStamp>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.4.1A0UnixTimeStamp]]

310

311

(% border="1" cellspacing="4" style="background-color:#f2f2f2" %)

312

|=(% colspan="4" style="background-color:#D9E2F3;color:#0070C0" %)**Status & Alarm field**

313

|**Size(bit)**|**6**|**1**|**1**

314

|**Value**|Reserve|[[Enable/disable Timeout Alarm>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]

315

0: No Alarm; 1: Alarm|Status

316

0: Close, 1: Open

317

318

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110547-6.png?width=1191&height=337&rev=1.1||alt="image-20220609110547-6.png" height="337" width="1191"]]

319

320

321

=== 2.3.3 Historical Door Open/Close Event, FPORT~=3 ===

322

323

DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.4A0DatalogFeature]].

324

325

The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.

326

327

* (((

328

Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.

329

)))

330

331

For example, in the US915 band, the max payload for different DR is:

332

333

1. (((

334

**DR0**: max is 11 bytes so one entry of data

335

)))

336

1. (((

337

**DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

338

)))

339

1. (((

340

**DR2**: total payload includes 11 entries of data

341

)))

342

1. (((

343

**DR3**: total payload includes 22 entries of data.

344

)))

345

346

If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0

347

348

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609112215-7.png?width=1250&height=277&rev=1.1||alt="image-20220609112215-7.png" height="277" width="1250"]]

**Downlink:**

0x31 61 8E 57 40 61 8E 81 70 05

**Uplink:**

00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50

**Parsed Value:**

[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]

363

364

365

[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],

366

367

[FALSE, OPEN, 1, 0, 2021-11-12 12:36:34],

368

369

[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],

370

371

[FALSE, OPEN, 2, 2, 2021-11-12 12:39:17],

372

373

[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],

374

375

[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],

376

377

[FALSE, OPEN, 3, 1, 2021-11-12 14:50:32],

378

379

[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],

380

381

[FALSE, OPEN, 4, 2, 2021-11-12 14:58:35],

382

383

[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],

384

385

386

=== 2.3.4 Sensor Configuration, FPORT~=4 ===

387

388

DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.

389

390

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110123-5.png?rev=1.1||alt="image-20220609110123-5.png"]]

* (((

**TDC: (default: 0x001C20)**

395

)))

396

397

Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.

* (((

**Disalarm: (default: 0)**

402

)))

403

404

**If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.

405

406

**If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.

407

408

409

**~ Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **

* (((

**Keep Status & Keep Time**

414

)))

415

416

Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]

417

418

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110018-4.png?width=1159&height=291&rev=1.1||alt="image-20220609110018-4.png" height="291" width="1159"]]

419

420

421

== 2.4 Payload Decoder file ==

(((

In TTN, use can add a custom payload so it shows friendly.

)))

(((

In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

)))

== 2.5 Datalog Feature ==

434

435

436

**Datalog Feature** is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.

437

438

439

=== 2.5.1 Ways to get datalog via LoRaWAN ===

440

441

442

Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.

443

444

* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.

445

* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.

446

447

Below is the typical case for the Datalog Feature (Set PNACKMD=1)

448

449

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]

450

451

=== 2.5.2 Unix TimeStamp ===

452

453

454

DS03A-LB uses Unix TimeStamp format based on

455

456

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]

457

458

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :

459

460

Below is the converter example

461

462

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]

463

464

So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25

465

466

467

=== 2.5.3 Set Device Time ===

468

469

470

User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.

471

472

Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).

473

474

(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**

475

476

477

== 2.6 Show Data in DataCake IoT Server ==

478

479

Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

480

481

482

**Step 1: Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]

483

484

**Step 2: Configure DS03A-LB in Datacake.**

485

486

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]

487

488

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]

489

490

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]

491

492

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]

493

494

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]

495

496

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]

497

498

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]

499

500

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]

501

502

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]

503

504

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]

505

506

507

== 2.7 Frequency Plans ==

508

509

510

The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

511

512

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]

513

514

515

== 2.8 Firmware Change Log ==

516

517

518

**Firmware download link:**

519

520

[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]

521

522

523

= 3. Configure DS03A-LB =

524

525

== 3.1 Configure Methods: ==

526

527

528

DS03A-LB supports below configure method:

529

530

* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].

531

* AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].

532

* LoRaWAN Downlink. Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.

533

534

== 3.2 General Commands ==

535

536

These commands are to configure:

537

538

* General system settings like: uplink interval.

539

* LoRaWAN protocol & radio related command.

540

541

They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:

542

543

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]

544

545

546

== 3.3 Commands special design for DS03A-LB ==

547

548

549

These commands only valid for DS03A-LB, as below:

550

551

552

=== 3.3.1 Set Transmit Interval Time ===

553

554

555

Feature: Change LoRaWAN End Node Transmit Interval.

556

557

(% style="color:blue" %)**AT Command: AT+TDC**

558

559

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

560

|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**

561

|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((

562

30000

563

OK

564

the interval is 30000ms = 30s

565

)))

566

|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((

567

OK

568

Set transmit interval to 60000ms = 60 seconds

569

)))

570

571

(% style="color:blue" %)**Downlink Command: 0x01**

572

573

Format: Command Code (0x01) followed by 3 bytes time value.

574

575

If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.

576

577

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

578

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

579

580

=== 3.3.2 Get Device Status ===

581

582

583

Send a LoRaWAN downlink to ask device send Alarm settings.

584

585

* (% style="color:blue" %)**Downlink Payload: **(%%)0x26 01

586

587

Sensor will upload Device Status via FPORT=5. See payload section for detail.

588

589

590

=== 3.3.3 Enable / Disable Alarm ===

591

592

Feature: Enable/Disable Alarm for open/close event. Default value 0.

**AT Command:**

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609140712-1.png?rev=1.1||alt="image-20220609140712-1.png"]]

597

598

**Downlink Command:**

599

600

0xA7 01 ~/~/ Same As AT+DISALARM=1

601

602

0xA7 00 ~/~/ Same As AT+DISALARM=0

603

604

605

=== 3.3.4 Alarm Base on Timeout ===

606

607

DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:

* (((

**Keep Status: Status to be monitor**

612

)))

613

614

Keep Status = 1: Monitor Close to Open event

615

616

Keep Status = 0: Monitor Open to Close event

* (((

**Keep Time: Timeout to send an Alarm**

621

)))

622

623

Range 0 ~~ 65535(0xFFFF) seconds.

624

625

If keep time = 0, Disable Alarm Base on Timeout feature.

626

627

If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.

628

629

630

**AT Command to configure:**

631

632

* (((

633

**AT+TTRIG=1,30** **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

**AT+TTRIG=0,0** **~-~-> ** Default Value, disable timeout Alarm.

638

)))

639

640

**Downlink Command to configure:**

641

642

**Command: 0xA9 aa bb cc**

643

644

**A9:** Command Type Code

645

646

**aa:** status to be monitored

**bb cc:** timeout.

If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30

Or

0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.

656

657

658

=== 3.3.5 Count Mod ===

**AT Command:**

|=**Command Example**|=**Function**|=**Response**

|(((

AT+COUNTMOD=0

)))|(((

the count value keeps accumulating mode

)))|(((

OK

)))

|(((

AT+COUNTMOD=1

)))|(((

the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）

)))|(((

OK

)))

**Downlink Command:**

681

682

Example: 0B aa => AT+COUNTMOD = second byte

683

684

685

=== 3.3.6 Interrupt Pin Channel Mod ===

**AT Command:**

|=**Command Example**|=**Function**|=**Response**

|(((

AT+TTRCHANNEL=1

)))|(((

set as single channel, only use PB14 pin as interrupt pin.

)))|(((

OK

)))

|(((

AT+TTRCHANNEL=2

)))|(((

is set as dual channel, use PB14 pin and PB15 pin as interrupt pin.

)))|(((

OK

)))

**Downlink Command:**

708

709

Example: 0D aa => AT+TTRCHANNEL = second byte

710

711

712

=== 3.3.7 Change the name of AT+TTRIG to AT+TTRIG1 ===

713

714

**Downlink Command:**

715

716

Example: A9 01 aa bb cc => AT+TTRIG1= third byte, 4th byte and 5th byte

717

718

719

=== 3.3.8 Added AT+TTRIG2 for PB15 pin ===

720

721

**Downlink Command:**

722

723

Example: A9 02 aa bb cc => AT+TTRIG2= third byte, 4th byte and 5th byte

724

725

726

=== 3.3.9 TTRIG1/2 timeout status alarm ===

727

728

It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.

**AT Command:**

|=**Command Example**|=**Function**|=**Response**

|(((

AT+TTRALARM=0

)))|(((

disable continuous alarm

)))|(((

OK

)))

|(((

AT+TTRALARM=60

)))|(((

The alarm interval is 60 minutes (unit: minutes)

)))|(((

OK

)))

**Downlink Command:**

751

752

Example: 0C aa => AT+TTRALARM= aa

753

754

755

=== 3.3.9 Select counting mode ===

**AT+TTRMODx=a,b**

When **a=0**, the door is opened to count, and when **a=1**,the closed door is counted.

760

761

When **b=0**, it is the last door open duration, and when **b=1**,the last door close duration.

**AT Command:**

|=**Command Example**|=**Function**|=**Response**

766

|(((

767

AT+TTRMODx=1,0

768

)))|Door closed count and record the last door opened duration|(((

OK

)))

|(((

AT+TTRMODx=0,1

)))|(((

Door opened count and record the last door Door Door open closed duration

)))|(((

OK

)))

= 4. Battery & Power Consumption =

782

783

784

DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.

785

786

[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .

787

788

789

= 5. OTA firmware update =

790

791

792

User can change firmware DS03A-LB to:

793

794

* Change Frequency band/ region.

795

* Update with new features.

796

* Fix bugs.

797

798

Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**

799

800

801

Methods to Update Firmware:

802

803

* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]

804

* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.

= 6. FAQ =

= 7. Order Info =

Part Number: (% style="color:blue" %)**DS03A-LB-XX**

814

815

(% style="color:red" %)**XX**(%%): The default frequency band

816

817

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

818

819

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

820

821

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

822

823

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

824

825

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

826

827

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

828

829

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

830

831

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 8. Packing Info =

(% style="color:#037691" %)**Package Includes**:

837

838

* DS03A-LB LoRaWAN Temperature Sensor

839

840

(% style="color:#037691" %)**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

854

855

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]

Wiki source code of DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

Applications

Navigation