DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.

21

)))

22

23

(((

24

The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

)))

(((

The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.

)))

(((

DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.

)))

(((

DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.

37

38

DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures

)))

(((

DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.

)))

(((

DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

)))

(((

Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

)))

[[image:image-20230522092934-2.png||height="346" width="774"]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

61

* Ultra-low power consumption

62

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

63

* Door Open/Close detect

64

* Door open/close statistics

65

* Datalog Feature, Open Alarm Feature

66

* Support Bluetooth v5.1 and LoRaWAN remote configure

67

* Support wireless OTA update firmware

68

* Uplink on periodically

69

* Downlink to change configure

70

* 8500mAh Battery for long term use

* Wall Mountable

* Outdoor Use

== 1.3 Specification ==

75

76

77

(% style="color:#037691" %)**Common DC Characteristics:**

78

79

* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v

80

* Operating Temperature: -40 ~~ 85°C

81

82

(% style="color:#037691" %)**Sensor Detect Distance:**

83

84

* Wood Door: 10mm ~~ 30mm

85

* Iron Door: 30 ~~ 45mm

86

87

(% style="color:#037691" %)**LoRa Spec:**

88

89

* Frequency Range, Band 1 (HF): 862 ~~ 1020 Mhz

90

* Max +22 dBm constant RF output vs.

91

* RX sensitivity: down to -139 dBm.

92

* Excellent blocking immunity

93

94

(% style="color:#037691" %)**Battery:**

95

96

* Li/SOCI2 un-chargeable battery

97

* Capacity: 8500mAh

98

* Self-Discharge: <1% / Year @ 25°C

99

* Max continuously current: 130mA

100

* Max boost current: 2A, 1 second

101

102

(% style="color:#037691" %)**Power Consumption**

103

104

* Sleep Mode: 5uA @ 3.3v

105

* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

106

107

== 1.4 Applications ==

108

109

110

[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]

111

112

113

== 1.5 Sleep mode and working mode ==

114

115

116

(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.

117

118

(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.

119

120

121

== 1.6 Button & LEDs ==

122

123

124

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]

125

126

127

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

128

|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**

129

|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((

130

If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.

131

Meanwhile, BLE module will be active and user can connect via BLE to configure device.

132

)))

133

|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((

134

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.

135

(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

136

Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.

137

)))

138

|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.

139

140

== 1.7 BLE connection ==

141

142

143

DS03A-LB support BLE remote configure.

144

145

146

BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:

147

148

* Press button to send an uplink

149

* Press button to active device.

150

* Device Power on or reset.

151

152

If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.

153

154

155

== 1.8 Pin Definitions ==

156

157

[[image:image-20230630160843-7.png]]

== 1.9 Mechanical ==

[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]

163

164

165

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]

166

167

168

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]

169

170

171

[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]

172

173

174

= 2. Configure DS03A-LB to connect to LoRaWAN network =

175

176

== 2.1 How it works ==

177

178

179

The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.

180

181

182

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

183

184

185

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)

186

187

The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

188

189

[[image:image-20230522092858-1.png||height="391" width="874"]]

190

191

192

(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.

193

194

Each DS03A-LB is shipped with a sticker with the default device EUI as below:

195

196

[[image:image-20230426085205-1.png||height="238" width="512"]]

197

198

199

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

200

201

(% style="display:none" %) (%%)

202

203

(% style="color:blue" %)**Register the device**

204

205

206

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)

207

208

209

(% style="color:blue" %)**Add APP EUI and DEV EUI**

210

211

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]

212

213

214

(% style="color:blue" %)**Add APP EUI in the application**

215

216

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]

217

218

219

(% style="color:blue" %)**Add APP KEY**

220

221

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]

222

223

224

(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB

225

226

227

Press the button for 5 seconds to activate the DS03A-LB.

228

229

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

230

231

After join success, it will start to upload messages to TTN and you can see the messages in the panel.

232

233

234

== 2.3 Uplink Payload ==

235

236

=== 2.3.1 Device Status, FPORT~=5 ===

237

238

239

Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.

240

241

The Payload format is as below.

242

243

244

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

245

|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**

Example parse in TTNv3

250

251

[[image:image-20230630155406-1.png||height="190" width="873"]]

252

253

254

(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B

255

256

(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version

257

258

(% style="color:#037691" %)**Frequency Band**:

0x01: EU868

0x02: US915

0x03: IN865

0x04: AU915

0x05: KZ865

0x06: RU864

0x07: AS923

0x08: AS923-1

0x09: AS923-2

0x0a: AS923-3

0x0b: CN470

0x0c: EU433

0x0d: KR920

0x0e: MA869

(% style="color:#037691" %)**Sub-Band**:

290

291

AU915 and US915:value 0x00 ~~ 0x08

292

293

CN470: value 0x0B ~~ 0x0C

294

295

Other Bands: Always 0x00

296

297

298

(% style="color:#037691" %)**Battery Info**:

299

300

Check the battery voltage.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2 Sensor Configuration, FPORT~=4(%%) ===

308

309

310

DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.

311

312

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

313

|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:721px" %)**Sensor Configuration FPORT=4**

314

315

|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((

Keep status1

)))|(% style="width:99px" %)(((

Keep time1

(unit: sec)

)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((

Keep time2

(unit: sec)

)))|(% style="width:98px" %)(((

Alarm interval

(unit: min)

)))

* (((

(% style="color:blue" %)**TDC: (default: 0x001C20)**

335

)))

336

337

Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.

* (((

(% style="color:blue" %)**Disalarm: (default: 0)**

342

)))

343

344

**If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.

345

346

**If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.

347

348

349

(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **

* (((

(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**

354

)))

355

356

Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]

357

358

[[image:image-20230630155527-3.png||height="146" width="902"]]

* (((

(% style="color:blue" %)**Alarm interval(default: 0)**

363

)))

364

365

When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.

366

367

368

=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===

369

370

371

DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:

372

373

* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].

374

* There is an Open/Close event. (This info can be disabled by AT+DISALARM=1)

375

376

1)When **AT+TTRCHANNEL=1**, Uplink Payload totals **11 bytes**. (**Default mode**)

377

378

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

379

|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**

380

381

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

382

Status

383

384

&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]

385

)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((

386

The last door open duration (unit: sec)

387

)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]

**Status & Alarm:**

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:668px" %)

392

|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:148px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:131px" %)**bit0**

393

|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((

394

Count mod

395

)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((

Alarm 0: No Alarm;

1: Alarm

)))|(% style="width:131px" %)(((

Status 0: Close;

1: Open

)))

[[image:image-20230630155451-2.png||height="246" width="928"]]

* (((

(% style="color:blue" %)**Count mod:Default=0**

410

)))

411

412

MOD=0 ~-~-> Uplink total open door times since factory

413

414

MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.

415

416

417

* (% style="color:blue" %)**TDC flag**

418

419

When the flag is 1, it means sending packets at normal time intervals.

420

421

Otherwise, it is a packet sent at non-TDC time.

* (((

(% style="color:#0000ff" %)**Alarm**

426

)))

427

428

See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]

* (((

(% style="color:blue" %)**Status**

433

)))

434

435

This bit is 1 when the door sensor is open and 0 when it is close.

* (((

(% style="color:blue" %)**Total open door events**

440

)))

441

442

Total pulse/counting base on open door.

443

444

Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215

* (((

(% style="color:blue" %)**The last door open duration**

449

)))

450

451

Door sensor last open duration.

Unit: sec.

[[image:image-20230701094042-1.png||height="154" width="763"]]

456

457

458

2)When **AT+TTRCHANNEL=2**, Uplink Payload totals **18 bytes**.

459

460

(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)

461

462

(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**

463

464

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)

465

|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**

466

467

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

468

Status1

469

470

&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1

471

)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((

472

The last door open duration1 (unit: sec)

473

)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((

474

Status2

475

476

&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2

477

)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)

478

479

**Status1 & Alarm1:**

480

481

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:775px" %)

482

|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:99px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:103px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:216px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**

483

|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((

484

Count mod

485

)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((

486

Alarm1 0: No Alarm; 1: Alarm

487

488

(PA8 of pin)

489

)))|(% style="width:181px" %)(((

490

Status1 0: Close; 1:Open

(PA8 of pin)

)))

**Status2 & Alarm2:**

496

497

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:591px" %)

498

|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:219px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**

499

|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((

500

Alarm2 0: No Alarm; 1: Alarm

501

502

(PA4 of pin)

503

)))|(% style="width:181px" %)(((

504

Status2 0: Close,;1:Open

(PA4 of pin)

)))

[[image:image-20230630155908-6.png||height="295" width="927"]]

* (((

(% id="cke_bm_695345S" style="color:blue; display:none" %)** **(% style="color:blue" %)**Count mod:Default=0**

514

)))

515

516

MOD=0 ~-~-> Uplink total open door times since factory

517

518

MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.

519

520

521

* (% style="color:blue" %)**TDC flag**

522

523

When the flag is 1, it means sending packets at normal time intervals.

524

525

Otherwise, it is a packet sent at non-TDC time.

* (((

(% style="color:#0000ff" %)**Alarm1 or Alarm2**

530

)))

531

532

See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]

* (((

(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**

537

)))

538

539

This bit is 1 when the door sensor is open and 0 when it is close.

* (((

(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**

544

)))

545

546

Total pulse/counting base on open door.

547

548

Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215

* (((

(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**

553

)))

554

555

Door sensor last open duration.

Unit: sec.

[[image:image-20230701094042-1.png||height="154" width="763"]]

560

561

562

=== 2.3.4 Historical Door Open/Close Event, FPORT~=3 ===

563

564

565

DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].

566

567

The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.

568

569

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)

570

|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**

571

572

|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((

573

Status

574

575

&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]

576

)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((

577

The last door open duration (unit: sec)

578

)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]

**Status & Alarm:**

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)

583

|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**

584

585

Count mod

586

)))|(% style="width:95px" %)(((

TDC flag 0:No;

1:Yes

)))|(% style="width:116px" %)(((

Alarm

0: No Alarm;

1: Alarm

)))|(% style="width:112px" %)(((

Status 0:Close;

1: Open

)))

* (((

Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.

604

)))

605

606

For example, in the US915 band, the max payload for different DR is:

607

608

(((

609

**~1. DR0**: max is 11 bytes so one entry of data

)))

(((

**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

)))

(((

**3. DR2**: total payload includes 11 entries of data

)))

(((

**4. DR3**: total payload includes 22 entries of data.

622

)))

623

624

If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0

625

626

[[image:image-20230630155556-4.png||height="146" width="938"]]

**Downlink:**

0x31 64 9E 7D 34 64 9E 7E 9C 05

**Uplink:**

45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B

**Parsed Value:**

[COUNTMOD, TDC_FLAG, ALARM, DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]

641

642

643

[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],

644

645

[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],

646

647

[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],

648

649

[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],

650

651

[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],

652

653

[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],

654

655

[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],

656

657

[[image:image-20230630172740-1.png||height="199" width="868"]]

658

659

660

== 2.4 Payload Decoder file ==

(((

In TTN, use can add a custom payload so it shows friendly.

)))

(((

In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

)))

== 2.5 Datalog Feature ==

673

674

675

(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.

676

677

(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**

678

679

680

=== 2.5.1 Ways to get datalog via LoRaWAN ===

681

682

683

Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.

684

685

* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.

686

* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.

687

688

Below is the typical case for the Datalog Feature (Set PNACKMD=1)

689

690

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]

691

692

693

=== 2.5.2 Unix TimeStamp ===

694

695

696

DS03A-LB uses Unix TimeStamp format based on

697

698

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]

699

700

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :

701

702

Below is the converter example

703

704

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]

705

706

So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25

707

708

709

=== 2.5.3 Set Device Time ===

710

711

712

User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.

713

714

Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).

715

716

(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**

717

718

719

== 2.6 Show Data in DataCake IoT Server ==

720

721

722

Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

723

724

725

(% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]

726

727

(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**

728

729

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]

730

731

732

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]

733

734

735

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]

736

737

738

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]

739

740

741

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]

742

743

744

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]

745

746

747

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]

748

749

750

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]

751

752

753

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]

754

755

756

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]

757

758

759

== 2.7 Frequency Plans ==

760

761

762

The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

763

764

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]

765

766

767

== 2.8 Firmware Change Log ==

768

769

770

**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]

771

772

773

= 3. Configure DS03A-LB =

774

775

== 3.1 Configure Methods: ==

776

777

778

DS03A-LB supports below configure method:

779

780

* AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].

781

* AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].

782

* LoRaWAN Downlink. Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.

783

784

== 3.2 General Commands ==

785

786

787

These commands are to configure:

788

789

* General system settings like: uplink interval.

790

* LoRaWAN protocol & radio related command.

791

792

They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:

793

794

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]

795

796

797

== 3.3 Commands special design for DS03A-LB ==

798

799

800

These commands only valid for DS03A-LB, as below:

801

802

803

=== 3.3.1 Set Transmit Interval Time ===

804

805

806

Feature: Change LoRaWAN End Node Transmit Interval.

807

808

(% style="color:blue" %)**AT Command: AT+TDC**

809

810

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

811

|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**

812

|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((

813

30000

814

OK

815

the interval is 30000ms = 30s

816

)))

817

|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((

818

OK

819

Set transmit interval to 60000ms = 60 seconds

820

)))

821

822

(% style="color:blue" %)**Downlink Command: 0x01**

823

824

Format: Command Code (0x01) followed by 3 bytes time value.

825

826

If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.

827

828

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

829

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

830

831

=== 3.3.2 Enable / Disable Alarm ===

832

833

834

Feature: Enable/Disable Alarm for open/close event. Default value 0.

835

836

(% style="color:blue" %)**AT Command: **

837

838

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

839

|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**

840

|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK

841

|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK

842

843

(% style="color:blue" %)**Downlink Command: **

844

845

0xA7 01 ~/~/ Same As AT+DISALARM=1

846

847

0xA7 00 ~/~/ Same As AT+DISALARM=0

848

849

850

=== 3.3.3 Alarm Base on Timeout ===

851

852

853

DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:

* (((

(% style="color:blue" %)**Keep Status: Status to be monitor**

858

)))

859

860

(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event

861

862

(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event

* (((

(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**

867

)))

868

869

Range 0 ~~ 65535(0xFFFF) seconds.

870

871

If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.

872

873

If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.

* (((

(% style="color:blue" %)**Downlink Command**

878

)))

879

880

(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**

881

882

**A9:** Command Type Code

883

884

**aa: **01:TTRIG1; 02:TTRIG2

885

886

**bb:** status to be monitored

**cc dd:** timeout.

1)**AT+TTRIG1**:(PA8 of pin)

892

893

(% style="color:blue" %)**AT Command to configure:**

894

895

* (((

896

(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

897

898

(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

(% style="color:#037691" %)**AT+TTRIG1=0,0** (%%) **~-~-> ** Default Value, disable timeout Alarm.

)))

(% style="color:blue" %)**Downlink Command to configure:**

909

910

If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or

911

912

0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.

913

914

915

2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)

916

917

(% style="color:blue" %)**AT Command to configure:**

918

919

* (((

920

(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.

921

922

(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.

)))

* (((

(% style="color:#037691" %)**AT+TTRIG2=0,0** (%%) **~-~-> ** Default Value, disable timeout Alarm.

)))

(% style="color:blue" %)**Downlink Command to configure:**

933

934

If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or

935

936

0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.

937

938

939

=== 3.3.4 TTRIG1 & TTRIG2 timeout status alarm ===

940

941

942

It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.

943

944

(% style="color:blue" %)**AT Command:**

945

946

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

947

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**

948

|(% style="width:155px" %)(((

949

AT+TTRALARM=0

950

)))|(% style="width:279px" %)(((

951

disable continuous alarm

952

)))|(% style="width:84px" %)(((

953

OK

954

)))

955

|(% style="width:155px" %)(((

956

AT+TTRALARM=60

957

)))|(% style="width:279px" %)(((

958

The alarm interval is 60 minutes (unit: minutes)

959

)))|(% style="width:84px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

964

965

Example: 0C aa => AT+TTRALARM= aa

966

967

968

=== 3.3.5 Count Mod ===

969

970

971

Feature: Manually set the count mode.

972

973

(% style="color:blue" %)**AT Command:**

974

975

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)

976

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**

977

|(% style="width:155px" %)(((

978

AT+COUNTMOD=0

979

)))|(% style="width:277px" %)(((

980

the count value keeps accumulating mode

981

)))|(% style="width:86px" %)(((

982

OK

983

)))

984

|(% style="width:155px" %)(((

985

AT+COUNTMOD=1

986

)))|(% style="width:277px" %)(((

987

the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）

988

)))|(% style="width:86px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

993

994

Example: 0B aa => AT+COUNTMOD = second byte

995

996

997

=== 3.3.6 Number of channel of door sensors ===

998

999

1000

Feature: Set the number of door sensor channels.

1001

1002

(% style="color:blue" %)**AT Command:**

1003

1004

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

1005

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**

1006

|(% style="width:155px" %)(((

1007

AT+TTRCHANNEL=1

1008

)))|(% style="width:259px" %)(((

1009

Set as single channel, only use PA8 pin as interrupt pin.

1010

)))|(% style="width:44px" %)(((

1011

OK

1012

)))

1013

|(% style="width:155px" %)(((

1014

AT+TTRCHANNEL=2

1015

)))|(% style="width:259px" %)(((

1016

Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.

1017

)))|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

1022

1023

Example: 0D aa => AT+TTRCHANNEL = second byte

1024

1025

1026

=== 3.3.7 Set Time Sync Mode ===

1027

1028

1029

Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.

1030

1031

SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.

1032

1033

(% style="color:blue" %)**AT Command:**

1034

1035

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

1036

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**

1037

|(% style="width:155px" %)(((

1038

AT+SYNCMOD=1

1039

)))|(% style="width:259px" %)(((

1040

Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.

1041

)))|(% style="width:44px" %)(((

1042

OK

1043

)))

1044

|(% style="width:155px" %)(((

1045

AT+SYNCMOD=1,8

1046

)))|(% style="width:259px" %)(((

1047

Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.

1048

)))|(% style="width:44px" %)(((

1049

OK

1050

)))

1051

|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK

1052

1053

(% style="color:blue" %)**Downlink Command:**

1054

1055

0x28 01 ~/~/ Same As AT+SYNCMOD=1

1056

1057

0x28 01 08 ~/~/ Same As AT+SYNCMOD=1,8

1058

1059

0x28 01 F4 ~/~/ Same As AT+SYNCMOD=1,-12

1060

1061

0x28 00 ~/~/ Same As AT+SYNCMOD=0

1062

1063

1064

=== 3.3.8 Clear the open door times and the duration of the last open door ===

1065

1066

1067

(% style="color:blue" %)**AT Command:**

1068

1069

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

1070

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**

1071

|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01

1076

1077

The sensor will clear the open door times and the duration of the last open door.

1078

1079

1080

=== 3.3.9 Set the count value of the number of open door ===

1081

1082

1083

(% style="color:blue" %)**AT Command:**

1084

1085

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)

1086

|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**

1087

|(% style="width:155px" %)(((

1088

AT+SETCNT=1,100

1089

)))|(% style="width:259px" %)(((

1090

Set the open door times of PA8 pin to 100 times.

1091

)))|(% style="width:44px" %)(((

1092

OK

1093

)))

1094

|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK

1095

|(% style="width:155px" %)(((

1096

AT+SETCNT=2,50

1097

)))|(% style="width:259px" %)(((

1098

Set the open door times of PA4 pin to 100 times.

1099

)))|(% style="width:44px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command:**

1104

1105

0xA6 01 00 00 64 ==> AT+SETCNT=1,100

1106

1107

0xA6 01 00 00 00 ==> AT+SETCNT=1,0

1108

1109

0xA6 02 00 00 32 ==> AT+SETCNT=2,50

1110

1111

1112

= 4. Battery & Power Consumption =

1113

1114

1115

DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.

1116

1117

[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .

1118

1119

1120

= 5. OTA firmware update =

1121

1122

1123

User can change firmware DS03A-LB to:

1124

1125

* Change Frequency band/ region.

1126

* Update with new features.

1127

* Fix bugs.

1128

1129

Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**

1130

1131

1132

**Methods to Update Firmware:**

1133

1134

* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**

1135

* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.

= 6. FAQ =

= 7. Order Info =

Part Number: (% style="color:blue" %)**DS03A-LB-XX**

1145

1146

(% style="color:red" %)**XX**(%%): The default frequency band

1147

1148

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

1149

1150

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

1151

1152

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1153

1154

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1155

1156

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1157

1158

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1159

1160

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1161

1162

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 8. Packing Info =

(% style="color:#037691" %)**Package Includes**:

1168

1169

* DS03A-LB LoRaWAN Temperature Sensor

1170

1171

(% style="color:#037691" %)**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1185

1186

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

Wiki source code of DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

Applications

Navigation