Wiki source code of DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

Version 34.11 by Xiaoling on 2023/07/01 14:31

version	line-number	content
4.2	1	(% style="text-align:center" %)
	2	[[image:image-20230516085523-1.jpeg\|\|height="491" width="491"]]
1.1	3
	4
	5	Table of Contents：
	6
	7	{{toc/}}
	8
	9
	10
	11
	12
	13
	14	= 1. Introduction =
	15
2.1	16	== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
1.1	17
	18
	19	(((
2.1	20	The Dragino DS03A-LB is a (% style="color:blue" %)LoRaWAN Door Sensor(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
1.1	21	)))
	22
	23	(((
2.1	24	The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
1.1	25	)))
	26
	27	(((
2.1	28	The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
1.1	29	)))
	30
	31	(((
2.1	32	DS03A-LB supports (% style="color:blue" %)Datalog Feature,(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
1.1	33	)))
	34
	35	(((
2.1	36	DS03A-LB has the (% style="color:blue" %)Open Alarm Feature(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
	37
	38	DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
1.1	39	)))
	40
	41	(((
2.1	42	DS03A-LB (% style="color:blue" %)supports BLE configure(%%) and (% style="color:blue" %)wireless OTA update(%%) which make user easy to use.
1.1	43	)))
	44
	45	(((
2.1	46	DS03A-LB is powered by (% style="color:blue" %)8500mAh Li-SOCI2 battery(%%), it is designed for long term use up to 5 years.
1.1	47	)))
	48
	49	(((
2.1	50	Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
1.1	51	)))
	52
	53
6.2	54	[[image:image-20230522092934-2.png\|\|height="346" width="774"]]
	55
	56
1.1	57	== 1.2 Features ==
	58
4.20	59
1.1	60	* LoRaWAN 1.0.3 Class A
	61	* Ultra-low power consumption
	62	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
2.1	63	* Door Open/Close detect
	64	* Door open/close statistics
	65	* Datalog Feature, Open Alarm Feature
1.1	66	* Support Bluetooth v5.1 and LoRaWAN remote configure
	67	* Support wireless OTA update firmware
	68	* Uplink on periodically
	69	* Downlink to change configure
	70	* 8500mAh Battery for long term use
2.1	71	* Wall Mountable
	72	* Outdoor Use
1.1	73
	74	== 1.3 Specification ==
	75
4.20	76
1.1	77	(% style="color:#037691" %)Common DC Characteristics:
	78
	79	* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
	80	* Operating Temperature: -40 ~~ 85°C
	81
2.1	82	(% style="color:#037691" %)Sensor Detect Distance:
1.1	83
2.1	84	* Wood Door: 10mm ~~ 30mm
	85	* Iron Door: 30 ~~ 45mm
1.1	86
	87	(% style="color:#037691" %)LoRa Spec:
	88
	89	* Frequency Range, Band 1 (HF): 862 ~~ 1020 Mhz
	90	* Max +22 dBm constant RF output vs.
	91	* RX sensitivity: down to -139 dBm.
	92	* Excellent blocking immunity
	93
	94	(% style="color:#037691" %)Battery:
	95
	96	* Li/SOCI2 un-chargeable battery
	97	* Capacity: 8500mAh
	98	* Self-Discharge: <1% / Year @ 25°C
	99	* Max continuously current: 130mA
	100	* Max boost current: 2A, 1 second
	101
	102	(% style="color:#037691" %)Power Consumption
	103
	104	* Sleep Mode: 5uA @ 3.3v
	105	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
	106
2.1	107	== 1.4 Applications ==
1.1	108
4.20	109
2.1	110	[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]
1.1	111
2.1	112
	113	== 1.5 Sleep mode and working mode ==
	114
	115
1.1	116	(% style="color:blue" %)Deep Sleep Mode: (%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
	117
	118	(% style="color:blue" %)Working Mode: (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
	119
	120
2.1	121	== 1.6 Button & LEDs ==
1.1	122
	123
2.1	124	[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
1.1	125
	126
	127	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	128	\|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)Behavior on ACT\|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)Action
	129	\|(% style="width:167px" %)Pressing ACT between 1s < time < 3s\|(% style="width:117px" %)Send an uplink\|(% style="width:225px" %)(((
	130	If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)blue led (%%)will blink once.
	131	Meanwhile, BLE module will be active and user can connect via BLE to configure device.
	132	)))
	133	\|(% style="width:167px" %)Pressing ACT for more than 3s\|(% style="width:117px" %)Active Device\|(% style="width:225px" %)(((
	134	(% style="color:green" %)Green led(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)OTA mode(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
	135	(% style="color:green" %)Green led(%%) will solidly turn on for 5 seconds after joined in network.
	136	Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
	137	)))
2.1	138	\|(% style="width:167px" %)Fast press ACT 5 times.\|(% style="width:117px" %)Deactivate Device\|(% style="width:225px" %)(% style="color:red" %)Red led(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
1.1	139
2.1	140	== 1.7 BLE connection ==
1.1	141
	142
12.4	143	DS03A-LB support BLE remote configure.
1.1	144
	145
	146	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
	147
	148	* Press button to send an uplink
	149	* Press button to active device.
	150	* Device Power on or reset.
	151
	152	If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
	153
	154
21.1	155	== 1.8 Pin Definitions ==
1.1	156
21.1	157	[[image:image-20230630160843-7.png]]
1.1	158
21.1	159	== 1.9 Mechanical ==
	160
	161
2.1	162	[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png\|\|height="399" width="513"]]
1.1	163
	164
2.1	165	[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
1.1	166
	167
2.1	168	[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
1.1	169
	170
2.1	171	[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
1.1	172
	173
2.1	174	= 2. Configure DS03A-LB to connect to LoRaWAN network =
1.1	175
	176	== 2.1 How it works ==
	177
	178
19.1	179	The DS03A-LB is configured as (% style="color:#037691" %)LoRaWAN OTAA Class A(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
1.1	180
	181
	182	== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
	183
	184
4.2	185	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
1.1	186
12.4	187	The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
1.1	188
6.2	189	[[image:image-20230522092858-1.png\|\|height="391" width="874"]]
1.1	190
6.2	191
4.2	192	(% style="color:blue" %)Step 1:(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
1.1	193
2.1	194	Each DS03A-LB is shipped with a sticker with the default device EUI as below:
1.1	195
4.2	196	[[image:image-20230426085205-1.png\|\|height="238" width="512"]]
1.1	197
	198
	199	You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
	200
4.2	201	(% style="display:none" %) (%%)
1.1	202
	203	(% style="color:blue" %)Register the device
	204
	205
4.2	206	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1\|\|alt="1675144099263-405.png"]](% style="display:none" %)
1.1	207
4.2	208
1.1	209	(% style="color:blue" %)Add APP EUI and DEV EUI
	210
4.2	211	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1\|\|alt="1675144117571-832.png"]]
1.1	212
	213
	214	(% style="color:blue" %)Add APP EUI in the application
	215
4.2	216	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1\|\|alt="1675144143021-195.png"]]
1.1	217
	218
	219	(% style="color:blue" %)Add APP KEY
	220
4.2	221	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1\|\|alt="1675144157838-392.png"]]
1.1	222
4.2	223
2.1	224	(% style="color:blue" %)Step 2:(%%) Activate on DS03A-LB
1.1	225
	226
2.1	227	Press the button for 5 seconds to activate the DS03A-LB.
1.1	228
2.1	229	(% style="color:green" %)Green led(%%) will fast blink 5 times, device will enter (% style="color:blue" %)OTA mode(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)Green led(%%) will solidly turn on for 5 seconds after joined in network.
1.1	230
	231	After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	232
	233
	234	== 2.3 Uplink Payload ==
	235
	236	=== 2.3.1 Device Status, FPORT~=5 ===
	237
7.3	238
2.1	239	Users can use the downlink command(0x26 01) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
1.1	240
	241	The Payload format is as below.
	242
	243
	244	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	245	\|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)Device Status (FPORT=5)
	246	\|(% style="width:103px" %)Size (bytes)\|(% style="width:72px" %)1\|2\|(% style="width:91px" %)1\|(% style="width:86px" %)1\|(% style="width:44px" %)2
	247	\|(% style="width:103px" %)Value\|(% style="width:72px" %)Sensor Model\|Firmware Version\|(% style="width:91px" %)Frequency Band\|(% style="width:86px" %)Sub-band\|(% style="width:44px" %)BAT
	248
	249	Example parse in TTNv3
	250
19.1	251	[[image:image-20230630155406-1.png\|\|height="190" width="873"]]
1.1	252
	253
8.1	254	(% style="color:#037691" %)Sensor Model(%%): For DS03A-LB, this value is 0x1B
1.1	255
	256	(% style="color:#037691" %)Firmware Version(%%): 0x0100, Means: v1.0.0 version
	257
	258	(% style="color:#037691" %)Frequency Band:
	259
12.2	260	0x01: EU868
1.1	261
12.2	262	0x02: US915
1.1	263
12.2	264	0x03: IN865
1.1	265
12.2	266	0x04: AU915
1.1	267
12.2	268	0x05: KZ865
1.1	269
12.2	270	0x06: RU864
1.1	271
12.2	272	0x07: AS923
1.1	273
12.2	274	0x08: AS923-1
1.1	275
12.2	276	0x09: AS923-2
1.1	277
12.2	278	0x0a: AS923-3
1.1	279
12.2	280	0x0b: CN470
1.1	281
12.2	282	0x0c: EU433
1.1	283
12.2	284	0x0d: KR920
1.1	285
12.2	286	0x0e: MA869
1.1	287
	288
	289	(% style="color:#037691" %)Sub-Band:
	290
	291	AU915 and US915:value 0x00 ~~ 0x08
	292
	293	CN470: value 0x0B ~~ 0x0C
	294
	295	Other Bands: Always 0x00
	296
	297
	298	(% style="color:#037691" %)Battery Info:
	299
	300	Check the battery voltage.
	301
	302	Ex1: 0x0B45 = 2885mV
	303
	304	Ex2: 0x0B49 = 2889mV
	305
	306
24.1	307	=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2 Sensor Configuration, FPORT~=4(%%) ===
1.1	308
4.3	309
22.1	310	DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
	311
34.2	312	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
34.3	313	\|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)Sensor Configuration FPORT=4
34.6	314	\|Size(bytes)\|(% style="width:75px" %)3\|(% style="width:50px" %)1\|(% style="width:100px" %)1\|(% style="width:90px" %)2\|(% style="width:100px" %)1\|(% style="width:100px" %)2\|(% style="width:98px" %)1
25.1	315	\|Value\|(% style="width:75px" %)TDC (unit:sec)\|(% style="width:77px" %)Disalarm\|(% style="width:96px" %)(((
34.4	316	Keep status1)))\|(% style="width:99px" %)(((
	317	Keep time1(unit: sec)
25.1	318	)))\|(% style="width:87px" %)Keep status2\|(% style="width:97px" %)(((
34.4	319	Keep time2(unit: sec)
25.1	320	)))\|(% style="width:98px" %)(((
34.4	321	Alarm interval(unit: min)
25.1	322	)))
	323
22.1	324	* (((
	325	(% style="color:blue" %)TDC: (default: 0x001C20)
	326	)))
	327
	328	Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
	329
	330
	331	* (((
	332	(% style="color:blue" %)Disalarm: (default: 0)
	333	)))
	334
	335	If Disalarm = 1, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
	336
	337	If Disalarm = 0, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
	338
	339
	340	(% style="color:red" %) Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
	341
	342
	343	* (((
25.1	344	(% style="color:blue" %)Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2
22.1	345	)))
	346
	347	Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
	348
	349	[[image:image-20230630155527-3.png\|\|height="146" width="902"]]
	350
	351
25.1	352	* (((
	353	(% style="color:blue" %)Alarm interval(default: 0)
	354	)))
	355
	356	When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
	357
	358
22.1	359	=== 2.3.3 Real-Time Open/Close Status, Uplink FPORT~=2 ===
	360
	361
2.1	362	DS03A-LB will send this uplink after Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
1.1	363
4.13	364	* Every 2 hours, this interval [[can be changed>>\|\|anchor="H3.3.1SetTransmitIntervalTime"]].
2.1	365	* There is an Open/Close event. (This info can be disabled by AT+DISALARM=1)
1.1	366
33.1	367	1)When AT+TTRCHANNEL=1, Uplink Payload totals 11 bytes. (Default mode)
	368
12.4	369	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
12.2	370	\|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)Real-Time Open/Close Status, FPORT=2
24.1	371	\|(% style="width:94px" %)Size(bytes)\|(% style="width:97px" %)1\|(% style="width:95px" %)3\|(% style="width:119px" %)3\|(% style="width:107px" %)4
	372	\|(% style="width:95px" %)Value\|(% style="width:97px" %)(((
	373	Status
	374
	375	&[[Alarm>>\|\|anchor="H3.3.4A0AlarmBaseonTimeout"]]
	376	)))\|(% style="width:95px" %)Total open door events\|(% style="width:119px" %)(((
	377	The last door open duration (unit: sec)
4.14	378	)))\|(% style="width:108px" %)[[Unix TimeStamp>>\|\|anchor="H2.5.2UnixTimeStamp"]]
1.1	379
8.1	380	Status & Alarm:
7.8	381
34.7	382	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
34.8	383	\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)Size(bit)\|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)[bit7:bit4]\|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)bit3\|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)bit2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)bit1\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)bit0
24.1	384	\|(% style="width:76px" %)Value\|(% style="width:96px" %)Reserve\|(% style="width:110px" %)(((
	385	Count mod
32.1	386	)))\|(% style="width:106px" %)TDC flag 0:No;1:Yes\|(% style="width:148px" %)(((
34.9	387	Alarm 0: No Alarm; 1: Alarm
32.1	388	)))\|(% style="width:131px" %)(((
34.9	389	Status 0: Close; 1: Open
25.1	390	)))
	391
19.1	392	[[image:image-20230630155451-2.png\|\|height="246" width="928"]]
1.1	393
25.1	394
31.1	395	* (((
	396	(% style="color:blue" %)Count mod:Default=0
	397	)))
	398
33.1	399	MOD=0 ~-~-> Uplink total open door times since factory
31.1	400
33.1	401	MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
31.1	402
	403
	404	* (% style="color:blue" %)TDC flag
	405
	406	When the flag is 1, it means sending packets at normal time intervals.
	407
	408	Otherwise, it is a packet sent at non-TDC time.
	409
	410
	411	* (((
	412	(% style="color:#0000ff" %)Alarm
	413	)))
	414
32.1	415	See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
31.1	416
	417
	418	* (((
	419	(% style="color:blue" %)Status
	420	)))
	421
	422	This bit is 1 when the door sensor is open and 0 when it is close.
	423
	424
	425	* (((
	426	(% style="color:blue" %)Total open door events
	427	)))
	428
	429	Total pulse/counting base on open door.
	430
	431	Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
	432
	433
	434	* (((
	435	(% style="color:blue" %)The last door open duration
	436	)))
	437
	438	Door sensor last open duration.
	439
	440	Unit: sec.
	441
	442	[[image:image-20230701094042-1.png\|\|height="154" width="763"]]
	443
	444
34.11	445	2) When AT+TTRCHANNEL=2, Uplink Payload totals 18 bytes.
25.1	446
33.1	447	(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
	448
34.1	449	(% style="color:red" %)Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.
33.1	450
34.10	451	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
	452	\|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)Real-Time Open/Close Status, FPORT=2
34.11	453	\|(% style="width:50px" %)Size(bytes)\|(% style="width:97px" %)1\|(% style="width:95px" %)3\|(% style="width:125px" %)3\|(% style="width:100px" %)4\|(% style="width:86px" %)1\|(% style="width:96px" %)3\|(% style="width:126px" %)3
25.1	454	\|(% style="width:95px" %)Value\|(% style="width:97px" %)(((
34.11	455	Status1 & [[Alarm>>\|\|anchor="H3.3.4A0AlarmBaseonTimeout"]]1
25.1	456	)))\|(% style="width:95px" %)Total open door events1\|(% style="width:125px" %)(((
	457	The last door open duration1 (unit: sec)
	458	)))\|(% style="width:100px" %)[[Unix TimeStamp>>\|\|anchor="H2.5.2UnixTimeStamp"]]\|(% style="width:86px" %)(((
34.11	459	Status2 & [[Alarm>>\|\|anchor="H3.3.4A0AlarmBaseonTimeout"]]2
25.1	460	)))\|(% style="width:96px" %)Total open door events2\|(% style="width:126px" %)The last door open duration2 (unit: sec)
	461
	462	Status1 & Alarm1:
	463
32.1	464	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:775px" %)
	465	\|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)Size(bit)\|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)[bit7:bit4]\|(% style="background-color:#d9e2f3; color:#0070c0; width:99px" %)bit3\|(% style="background-color:#d9e2f3; color:#0070c0; width:103px" %)bit2\|(% style="background-color:#d9e2f3; color:#0070c0; width:216px" %)bit1\|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)bit0
	466	\|(% style="width:76px" %)Value\|(% style="width:96px" %)Reserve\|(% style="width:99px" %)(((
25.1	467	Count mod
32.1	468	)))\|(% style="width:103px" %)TDC flag 0:No;1:Yes\|(% style="width:216px" %)(((
	469	Alarm1 0: No Alarm; 1: Alarm
25.1	470
32.1	471	(PA8 of pin)
	472	)))\|(% style="width:181px" %)(((
	473	Status1 0: Close; 1:Open
25.1	474
32.1	475	(PA8 of pin)
25.1	476	)))
	477
	478	Status2 & Alarm2:
	479
32.1	480	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:591px" %)
	481	\|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)Size(bit)\|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)[bit7:bit2]\|(% style="background-color:#d9e2f3; color:#0070c0; width:219px" %)bit1\|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)bit0
	482	\|(% style="width:76px" %)Value\|(% style="width:113px" %)Reserve\|(% style="width:219px" %)(((
	483	Alarm2 0: No Alarm; 1: Alarm
25.1	484
32.1	485	(PA4 of pin)
	486	)))\|(% style="width:181px" %)(((
	487	Status2 0: Close,;1:Open
25.1	488
32.1	489	(PA4 of pin)
25.1	490	)))
	491
19.1	492	[[image:image-20230630155908-6.png\|\|height="295" width="927"]]
1.1	493
19.1	494
32.1	495	* (((
33.1	496	(% id="cke_bm_695345S" style="color:blue; display:none" %) (% style="color:blue" %)Count mod:Default=0
32.1	497	)))
	498
33.1	499	MOD=0 ~-~-> Uplink total open door times since factory
32.1	500
33.1	501	MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
32.1	502
	503
	504	* (% style="color:blue" %)TDC flag
	505
	506	When the flag is 1, it means sending packets at normal time intervals.
	507
	508	Otherwise, it is a packet sent at non-TDC time.
	509
	510
	511	* (((
	512	(% style="color:#0000ff" %)Alarm1 or Alarm2
	513	)))
	514
	515	See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
	516
	517
	518	* (((
	519	(% style="color:blue" %)Status1 (% style="color:#0000ff" %)or (% style="color:blue" %)Status2
	520	)))
	521
	522	This bit is 1 when the door sensor is open and 0 when it is close.
	523
	524
	525	* (((
	526	(% style="color:blue" %)Total open door events1 (% style="color:#0000ff" %)or(% style="color:blue" %) Total open door events2
	527	)))
	528
	529	Total pulse/counting base on open door.
	530
	531	Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
	532
	533
	534	* (((
	535	(% style="color:blue" %)The last door open duration1 (% style="color:#0000ff" %)or(% style="color:blue" %) The last door open duration2
	536	)))
	537
	538	Door sensor last open duration.
	539
	540	Unit: sec.
	541
	542	[[image:image-20230701094042-1.png\|\|height="154" width="763"]]
	543
	544
22.1	545	=== 2.3.4 Historical Door Open/Close Event, FPORT~=3 ===
1.1	546
4.4	547
4.16	548	DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>\|\|anchor="H2.5DatalogFeature"]].
1.1	549
2.1	550	The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
1.1	551
25.1	552	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
	553	\|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)Real-Time Open/Close Status, FPORT=3
	554	\|(% style="width:94px" %)Size(bytes)\|(% style="width:97px" %)1\|(% style="width:95px" %)3\|(% style="width:119px" %)3\|(% style="width:107px" %)4
	555	\|(% style="width:95px" %)Value\|(% style="width:97px" %)(((
	556	Status
	557
	558	&[[Alarm>>\|\|anchor="H3.3.4A0AlarmBaseonTimeout"]]
	559	)))\|(% style="width:95px" %)Total open door events\|(% style="width:119px" %)(((
	560	The last door open duration (unit: sec)
	561	)))\|(% style="width:108px" %)[[Unix TimeStamp>>\|\|anchor="H2.5.2UnixTimeStamp"]]
	562
	563	Status & Alarm:
	564
	565	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
	566	\|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)Size(bit)\|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)bit7\|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)bit6\|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)[bit5:bit4]\|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)bit3\|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)bit2\|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)bit1\|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)bit0
	567	\|(% style="width:76px" %)Value\|(% style="width:88px" %)No ACK message\|(% style="width:92px" %)Poll Message Flag\|(% style="width:89px" %)Reserve\|(% style="width:90px" %)(((
	568	Count mod
32.1	569	)))\|(% style="width:95px" %)(((
	570	TDC flag 0:No;
	571
	572	1:Yes
	573	)))\|(% style="width:116px" %)(((
	574	Alarm
	575
25.1	576	0: No Alarm;
	577
	578	1: Alarm
	579	)))\|(% style="width:112px" %)(((
	580	Status 0:Close;
	581
	582	1: Open
	583	)))
	584
2.1	585	* (((
4.15	586	Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>\|\|anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
2.1	587	)))
1.1	588
2.1	589	For example, in the US915 band, the max payload for different DR is:
1.1	590
7.2	591	(((
	592	~1. DR0: max is 11 bytes so one entry of data
2.1	593	)))
7.2	594
	595	(((
	596	2. DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
2.1	597	)))
7.2	598
	599	(((
	600	3. DR2: total payload includes 11 entries of data
2.1	601	)))
7.2	602
	603	(((
	604	4. DR3: total payload includes 22 entries of data.
2.1	605	)))
1.1	606
2.1	607	If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
1.1	608
19.1	609	[[image:image-20230630155556-4.png\|\|height="146" width="938"]]
1.1	610
2.1	611	Downlink:
1.1	612
19.1	613	0x31 64 9E 7D 34 64 9E 7E 9C 05
1.1	614
	615
2.1	616	Uplink:
1.1	617
19.1	618	45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
1.1	619
	620
2.1	621	Parsed Value:
1.1	622
31.1	623	[COUNTMOD, TDC_FLAG, ALARM, DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
1.1	624
	625
19.1	626	[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
1.1	627
19.1	628	[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
1.1	629
19.1	630	[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
1.1	631
19.1	632	[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
1.1	633
19.1	634	[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
1.1	635
19.1	636	[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
1.1	637
19.1	638	[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
1.1	639
27.1	640	[[image:image-20230630172740-1.png\|\|height="199" width="868"]]
1.1	641
21.1	642
1.1	643	== 2.4 Payload Decoder file ==
	644
	645
	646	(((
	647	In TTN, use can add a custom payload so it shows friendly.
	648	)))
	649
	650	(((
	651	In the page Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder to add the decoder from: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
	652	)))
	653
	654
	655	== 2.5 Datalog Feature ==
	656
	657
4.6	658	(% style="color:blue" %)Datalog Feature (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
1.1	659
25.1	660	(% style="color:red" %)Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.
1.1	661
25.1	662
1.1	663	=== 2.5.1 Ways to get datalog via LoRaWAN ===
	664
	665
4.17	666	Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
1.1	667
2.1	668	* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
	669	* b) DS03A-LB will send data in CONFIRMED Mode when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
1.1	670
2.1	671	Below is the typical case for the Datalog Feature (Set PNACKMD=1)
1.1	672
	673	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1\|\|alt="image-20220703111700-2.png" height="381" width="1119"]]
	674
4.7	675
1.1	676	=== 2.5.2 Unix TimeStamp ===
	677
	678
2.1	679	DS03A-LB uses Unix TimeStamp format based on
1.1	680
	681	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1\|\|alt="image-20220523001219-11.png" height="97" width="627"]]
	682
	683	User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
	684
	685	Below is the converter example
	686
	687	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1\|\|alt="image-20220523001219-12.png" height="298" width="720"]]
	688
	689	So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
	690
	691
	692	=== 2.5.3 Set Device Time ===
	693
	694
	695	User need to set (% style="color:blue" %)SYNCMOD=1(%%) to enable sync time via MAC command.
	696
2.1	697	Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
1.1	698
2.1	699	(% style="color:red" %)Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.
1.1	700
	701
2.1	702	== 2.6 Show Data in DataCake IoT Server ==
1.1	703
4.7	704
2.1	705	Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
1.1	706
	707
4.6	708	(% style="color:blue" %)Step 1:(%%) Link TTNv3 to Datacake.[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
1.1	709
4.6	710	(% style="color:blue" %)Step 2:(%%) Configure DS03A-LB in Datacake.
1.1	711
2.1	712	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1\|\|alt="1654746350207-427.png"]]
1.1	713
4.17	714
2.1	715	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1\|\|alt="1654747162439-840.png"]]
1.1	716
4.17	717
2.1	718	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1\|\|alt="1654746405400-203.png"]]
1.1	719
4.7	720
2.1	721	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1\|\|alt="1654746763908-732.png"]]
1.1	722
4.17	723
2.1	724	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1\|\|alt="1654746716087-684.png"]]
1.1	725
4.7	726
2.1	727	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1\|\|alt="1654746693868-718.png"]]
1.1	728
4.7	729
2.1	730	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1\|\|alt="1654746674738-826.png"]]
1.1	731
4.7	732
2.1	733	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1\|\|alt="1654746646379-591.png"]]
1.1	734
4.7	735
2.1	736	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1\|\|alt="1654746549277-209.png"]]
1.1	737
4.7	738
2.1	739	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1\|\|alt="1654746593411-887.png"]]
1.1	740
	741
	742	== 2.7 Frequency Plans ==
	743
	744
2.1	745	The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
1.1	746
	747	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
	748
	749
	750	== 2.8 Firmware Change Log ==
	751
	752
7.4	753	Firmware download link: [[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
1.1	754
	755
2.1	756	= 3. Configure DS03A-LB =
1.1	757
	758	== 3.1 Configure Methods: ==
	759
	760
2.1	761	DS03A-LB supports below configure method:
1.1	762
	763	* AT Command via Bluetooth Connection (Recommended): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
	764	* AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
	765	* LoRaWAN Downlink. Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
	766
	767	== 3.2 General Commands ==
	768
7.4	769
1.1	770	These commands are to configure:
	771
	772	* General system settings like: uplink interval.
	773	* LoRaWAN protocol & radio related command.
	774
	775	They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
	776
	777	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	778
	779
2.1	780	== 3.3 Commands special design for DS03A-LB ==
1.1	781
	782
2.1	783	These commands only valid for DS03A-LB, as below:
1.1	784
	785
29.1	786	=== 3.3.1 Set Transmit Interval Time ===
1.1	787
	788
	789	Feature: Change LoRaWAN End Node Transmit Interval.
	790
	791	(% style="color:blue" %)AT Command: AT+TDC
	792
	793	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
7.5	794	\|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)Command Example\|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)Function\|=(% style="background-color:#D9E2F3; color:#0070c0" %)Response
1.1	795	\|(% style="width:156px" %)AT+TDC=?\|(% style="width:137px" %)Show current transmit Interval\|(((
	796	30000
	797	OK
	798	the interval is 30000ms = 30s
	799	)))
	800	\|(% style="width:156px" %)AT+TDC=60000\|(% style="width:137px" %)Set Transmit Interval\|(((
	801	OK
	802	Set transmit interval to 60000ms = 60 seconds
	803	)))
	804
	805	(% style="color:blue" %)Downlink Command: 0x01
	806
	807	Format: Command Code (0x01) followed by 3 bytes time value.
	808
	809	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	810
	811	* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	812	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	813
27.1	814	=== 3.3.2 Enable / Disable Alarm ===
1.1	815
	816
2.1	817	Feature: Enable/Disable Alarm for open/close event. Default value 0.
1.1	818
4.7	819	(% style="color:blue" %)AT Command:
1.1	820
4.7	821	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	822	\|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)Command Example\|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)Function\|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)Response
	823	\|(% style="width:154px" %)AT+DISALARM=1\|(% style="width:278px" %)End node will only send packets in TDC time.\|OK
	824	\|(% style="width:154px" %)AT+DISALARM=0\|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor\|OK
1.1	825
4.7	826	(% style="color:blue" %)Downlink Command:
1.1	827
2.1	828	0xA7 01 ~/~/ Same As AT+DISALARM=1
1.1	829
2.1	830	0xA7 00 ~/~/ Same As AT+DISALARM=0
1.1	831
	832
27.1	833	=== 3.3.3 Alarm Base on Timeout ===
1.1	834
4.7	835
2.1	836	DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
1.1	837
	838
2.1	839	* (((
4.8	840	(% style="color:blue" %)Keep Status: Status to be monitor
2.1	841	)))
1.1	842
4.8	843	(% style="color:#037691" %)Keep Status = 1(%%): Monitor Close to Open event
1.1	844
4.8	845	(% style="color:#037691" %)Keep Status = 0(%%): Monitor Open to Close event
1.1	846
	847
2.1	848	* (((
4.8	849	(% style="color:blue" %)Keep Time: Timeout to send an Alarm
2.1	850	)))
1.1	851
2.1	852	Range 0 ~~ 65535(0xFFFF) seconds.
1.1	853
4.8	854	If (% style="color:#037691" %)keep time = 0(%%), Disable Alarm Base on Timeout feature.
1.1	855
4.8	856	If (% style="color:#037691" %)keep time > 0(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
1.1	857
	858
27.1	859	* (((
	860	(% style="color:blue" %)Downlink Command
	861	)))
	862
	863	(% style="color:#037691" %)Command: 0xA9 aa bb cc dd
	864
	865	A9: Command Type Code
	866
	867	aa: 01:TTRIG1; 02:TTRIG2
	868
	869	bb: status to be monitored
	870
	871	cc dd: timeout.
	872
	873
	874	1)AT+TTRIG1:(PA8 of pin)
	875
4.8	876	(% style="color:blue" %)AT Command to configure:
1.1	877
2.1	878	* (((
27.1	879	(% style="color:#037691" %)AT+TTRIG1=1,30 (%%) ~-~-> When the Keep Status change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
	880
	881	(% style="color:#037691" %)AT+TTRIG1=0,30 (%%) ~-~-> When the Keep Status change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
2.1	882	)))
1.1	883
2.1	884	* (((
27.1	885	(% style="color:#037691" %)AT+TTRIG1=0,0 (%%) ~-~-> Default Value, disable timeout Alarm.
	886
	887
	888
2.1	889	)))
1.1	890
4.8	891	(% style="color:blue" %)Downlink Command to configure:
1.1	892
27.1	893	If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
1.1	894
27.1	895	0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
1.1	896
	897
27.1	898	2)AT+TTRIG2:(PA4 of pin,need to use AT+TTRCHANNEL=2)
1.1	899
27.1	900	(% style="color:blue" %)AT Command to configure:
1.1	901
27.1	902	* (((
	903	(% style="color:#037691" %)AT+TTRIG2=1,30 (%%) ~-~-> When the Keep Status change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
1.1	904
27.1	905	(% style="color:#037691" %)AT+TTRIG2=0,30 (%%) ~-~-> When the Keep Status change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
	906	)))
1.1	907
27.1	908	* (((
	909	(% style="color:#037691" %)AT+TTRIG2=0,0 (%%) ~-~-> Default Value, disable timeout Alarm.
1.1	910
	911
27.1	912
	913	)))
	914
	915	(% style="color:blue" %)Downlink Command to configure:
	916
	917	If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
	918
	919	0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
	920
	921
	922	=== 3.3.4 TTRIG1 & TTRIG2 timeout status alarm ===
	923
	924
	925	It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
	926
	927	(% style="color:blue" %)AT Command:
	928
	929	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	930	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)Response
	931	\|(% style="width:155px" %)(((
	932	AT+TTRALARM=0
	933	)))\|(% style="width:279px" %)(((
	934	disable continuous alarm
	935	)))\|(% style="width:84px" %)(((
	936	OK
	937	)))
	938	\|(% style="width:155px" %)(((
	939	AT+TTRALARM=60
	940	)))\|(% style="width:279px" %)(((
	941	The alarm interval is 60 minutes (unit: minutes)
	942	)))\|(% style="width:84px" %)(((
	943	OK
	944	)))
	945
	946	(% style="color:blue" %)Downlink Command:
	947
	948	Example: 0C aa => AT+TTRALARM= aa
	949
	950
2.1	951	=== 3.3.5 Count Mod ===
1.1	952
	953
27.1	954	Feature: Manually set the count mode.
	955
4.8	956	(% style="color:blue" %)AT Command:
	957
4.9	958	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
4.19	959	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)Response
4.9	960	\|(% style="width:155px" %)(((
2.1	961	AT+COUNTMOD=0
4.9	962	)))\|(% style="width:277px" %)(((
2.1	963	the count value keeps accumulating mode
4.9	964	)))\|(% style="width:86px" %)(((
2.1	965	OK
	966	)))
4.9	967	\|(% style="width:155px" %)(((
2.1	968	AT+COUNTMOD=1
4.9	969	)))\|(% style="width:277px" %)(((
2.1	970	the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
4.9	971	)))\|(% style="width:86px" %)(((
2.1	972	OK
	973	)))
1.1	974
4.8	975	(% style="color:blue" %)Downlink Command:
1.1	976
2.1	977	Example: 0B aa => AT+COUNTMOD = second byte
1.1	978
	979
29.1	980	=== 3.3.6 Number of channel of door sensors ===
1.1	981
	982
27.1	983	Feature: Set the number of door sensor channels.
	984
4.8	985	(% style="color:blue" %)AT Command:
	986
4.9	987	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
27.1	988	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Function\|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)Response
4.9	989	\|(% style="width:155px" %)(((
2.1	990	AT+TTRCHANNEL=1
27.1	991	)))\|(% style="width:259px" %)(((
	992	Set as single channel, only use PA8 pin as interrupt pin.
4.9	993	)))\|(% style="width:44px" %)(((
2.1	994	OK
	995	)))
4.9	996	\|(% style="width:155px" %)(((
2.1	997	AT+TTRCHANNEL=2
27.1	998	)))\|(% style="width:259px" %)(((
	999	Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
4.9	1000	)))\|(% style="width:44px" %)(((
2.1	1001	OK
	1002	)))
1.1	1003
4.8	1004	(% style="color:blue" %)Downlink Command:
1.1	1005
2.1	1006	Example: 0D aa => AT+TTRCHANNEL = second byte
	1007
	1008
29.1	1009	=== 3.3.7 Set Time Sync Mode ===
28.1	1010
	1011
	1012	Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
	1013
	1014	SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
	1015
	1016	(% style="color:blue" %)AT Command:
	1017
	1018	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
	1019	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Function\|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)Response
	1020	\|(% style="width:155px" %)(((
	1021	AT+SYNCMOD=1
	1022	)))\|(% style="width:259px" %)(((
	1023	Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
	1024	)))\|(% style="width:44px" %)(((
	1025	OK
	1026	)))
	1027	\|(% style="width:155px" %)(((
	1028	AT+SYNCMOD=1,8
	1029	)))\|(% style="width:259px" %)(((
	1030	Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
	1031	)))\|(% style="width:44px" %)(((
	1032	OK
	1033	)))
	1034	\|(% style="width:155px" %)AT+SYNCMOD=1,-12\|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.\|(% style="width:44px" %)OK
	1035
	1036	(% style="color:blue" %)Downlink Command:
	1037
	1038	0x28 01 ~/~/ Same As AT+SYNCMOD=1
	1039
	1040	0x28 01 08 ~/~/ Same As AT+SYNCMOD=1,8
	1041
	1042	0x28 01 F4 ~/~/ Same As AT+SYNCMOD=1,-12
	1043
	1044	0x28 00 ~/~/ Same As AT+SYNCMOD=0
	1045
	1046
31.1	1047	=== 3.3.8 Clear the open door times and the duration of the last open door ===
28.1	1048
	1049
	1050	(% style="color:blue" %)AT Command:
	1051
	1052	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
	1053	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Function\|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)Response
31.1	1054	\|(% style="width:155px" %)AT+CLRC\|(% style="width:259px" %)clear the open door times and the duration of the last open door.\|(% style="width:44px" %)(((
28.1	1055	OK
	1056	)))
	1057
	1058	(% style="color:blue" %)Downlink Command:(%%)0xA6 01
	1059
31.1	1060	The sensor will clear the open door times and the duration of the last open door.
28.1	1061
	1062
31.1	1063	=== 3.3.9 Set the count value of the number of open door ===
28.1	1064
	1065
	1066	(% style="color:blue" %)AT Command:
	1067
	1068	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
	1069	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Function\|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)Response
	1070	\|(% style="width:155px" %)(((
	1071	AT+SETCNT=1,100
	1072	)))\|(% style="width:259px" %)(((
31.1	1073	Set the open door times of PA8 pin to 100 times.
28.1	1074	)))\|(% style="width:44px" %)(((
	1075	OK
	1076	)))
31.1	1077	\|(% style="width:155px" %)AT+SETCNT=1,0\|(% style="width:259px" %)Clear the open door times of PA8 pin.\|(% style="width:44px" %)OK
28.1	1078	\|(% style="width:155px" %)(((
	1079	AT+SETCNT=2,50
	1080	)))\|(% style="width:259px" %)(((
31.1	1081	Set the open door times of PA4 pin to 100 times.
28.1	1082	)))\|(% style="width:44px" %)(((
	1083	OK
	1084	)))
	1085
	1086	(% style="color:blue" %)Downlink Command:
	1087
	1088	0xA6 01 00 00 64 ==> AT+SETCNT=1,100
	1089
	1090	0xA6 01 00 00 00 ==> AT+SETCNT=1,0
	1091
	1092	0xA6 02 00 00 32 ==> AT+SETCNT=2,50
	1093
	1094
1.1	1095	= 4. Battery & Power Consumption =
	1096
	1097
2.1	1098	DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1.1	1099
	1100	[[Battery Info & Power Consumption Analyze>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
	1101
	1102
	1103	= 5. OTA firmware update =
	1104
	1105
2.1	1106	User can change firmware DS03A-LB to:
1.1	1107
	1108	* Change Frequency band/ region.
	1109	* Update with new features.
	1110	* Fix bugs.
	1111
	1112	Firmware and changelog can be downloaded from : [[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
	1113
	1114
7.8	1115	Methods to Update Firmware:
1.1	1116
12.4	1117	* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
	1118	* Update through UART TTL interface: [[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]].
1.1	1119
	1120	= 6. FAQ =
	1121
	1122
	1123
	1124	= 7. Order Info =
	1125
	1126
2.1	1127	Part Number: (% style="color:blue" %)DS03A-LB-XX
1.1	1128
	1129	(% style="color:red" %)XX(%%): The default frequency band
	1130
	1131	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	1132
	1133	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	1134
	1135	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	1136
	1137	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	1138
	1139	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	1140
	1141	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	1142
	1143	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	1144
	1145	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	1146
	1147	= 8. Packing Info =
	1148
	1149
	1150	(% style="color:#037691" %)Package Includes:
	1151
2.1	1152	* DS03A-LB LoRaWAN Temperature Sensor
1.1	1153
	1154	(% style="color:#037691" %)Dimension and weight:
	1155
	1156	* Device Size: cm
	1157
	1158	* Device Weight: g
	1159
	1160	* Package Size / pcs : cm
	1161
	1162	* Weight / pcs : g
	1163
	1164	= 9. Support =
	1165
	1166
	1167	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
	1168
4.9	1169	* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

Wiki source code of DS03A-LB Outdoor LoRaWAN Door Sensor User Manual

Applications