Last modified by Mengting Qiu on 2025/01/10 09:53
From version < 8.1 >
edited by Saxer Lin
on 2023/06/08 17:50
To version 1.1 >
edited by Edwin Chen
on 2023/04/22 23:28
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Edwin
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
1 +
3 3  
4 4  
5 5  **Table of Contents：**
... ... @@ -13,63 +13,55 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
15 +== 1.1 What is D2x-LB LoRaWAN Temperature Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
19 +The Dragino D2x-LB is a (% style="color:blue" %)**LoRaWAN Temperature Sensor**(%%) for Internet of Things solution. D2x-LB has 1 ~~ 3 temperature probes. D2x-LB will convert the Temperature reading to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
23 +The LoRa wireless technology used in D2x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
27 +The temperature sensor used in D2x-LB can (% style="color:blue" %)**measure -55°C ~~ 125°C with accuracy ±0.5°C (max ±2.0 °C)**(%%).
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
31 +D2x-LB supports (% style="color:blue" %)**temperature alarm feature,**(%%) user can set temperature alarm for instant notice. D2x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
35 +D2x-LB has max 3 probes which measure maximum 3 temperature points.
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
39 +D2x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
43 +D2x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
47 +Each D2x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
54 -[[image:image-20230522092934-2.png||height="346" width="774"]]
55 -
56 -
57 57  == 1.2 ​Features ==
58 58  
59 -
60 60  * LoRaWAN 1.0.3 Class A
61 61  * Ultra-low power consumption
55 +* 1 ~~ 3 External Temperature Probes
56 +* Measure range -55°C ~~ 125°C
57 +* Temperature alarm
62 62  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
63 -* Door Open/Close detect
64 -* Door open/close statistics
65 -* Datalog Feature, Open Alarm Feature
66 66  * Support Bluetooth v5.1 and LoRaWAN remote configure
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 70  * 8500mAh Battery for long term use
71 -* Wall Mountable
72 -* Outdoor Use
73 73  
74 74  
75 75  == 1.3 Specification ==
... ... @@ -80,10 +80,11 @@
80 80  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
81 81  * Operating Temperature: -40 ~~ 85°C
82 82  
83 -(% style="color:#037691" %)**Sensor Detect Distance:**
74 +(% style="color:#037691" %)**Temperature Sensor:**
84 84  
85 -* Wood Door: 10mm ~~ 30mm
86 -* Iron Door: 30 ~~ 45mm
76 +* Dallas DS18B20
77 +* Range: -55 to + 125°C
78 +* Accuracy ±0.5°C (max ±2.0 °C).
87 87  
88 88  (% style="color:#037691" %)**LoRa Spec:**
89 89  
... ... @@ -106,24 +106,18 @@
106 106  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
107 107  
108 108  
109 -== 1.4 Applications ==
101 +== 1.4 Sleep mode and working mode ==
110 110  
111 111  
112 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]
113 -
114 -
115 -== 1.5 Sleep mode and working mode ==
116 -
117 -
118 118  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
119 119  
120 120  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
121 121  
122 122  
123 -== 1.6 Button & LEDs ==
109 +== 1.5 Button & LEDs ==
124 124  
125 125  
126 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
112 +[[image:1675071855856-879.png]]
127 127  
128 128  
129 129  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
... ... @@ -137,10 +137,10 @@
137 137  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
138 138  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
139 139  )))
140 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
126 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means D2x-LB is in Deep Sleep Mode.
141 141  
142 142  
143 -== 1.7 BLE connection ==
129 +== 1.6 BLE connection ==
144 144  
145 145  
146 146  D2x-LB support BLE remote configure.
... ... @@ -155,78 +155,112 @@
155 155  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
156 156  
157 157  
158 -== 1.8 Mechanical ==
144 +== 1.7  Hardware Variant ==
159 159  
160 160  
161 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
147 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
148 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
149 +|(% style="width:102px" %)D20-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
150 +1 x DS28B20 Probe
162 162  
152 +Cable Length : 2 meters
163 163  
164 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
154 +
155 +)))
156 +|(% style="width:102px" %)D22-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 +2 x DS28B20 Probes
165 165  
159 +Cable lengths total 1.5meters per probe
166 166  
167 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
161 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K21G-210811.pdf]]
162 +)))
163 +|(% style="width:102px" %)(((
164 +(((
165 +D23-LB
166 +)))
168 168  
168 +(((
169 +
170 +)))
171 +)))|(% style="width:190px" %) |(% style="width:297px" %)(((
172 +3 x DS28B20 Probes
169 169  
170 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
174 +Cable lengths total 1.5meters per probe
171 171  
176 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K31G-210811.pdf]]
177 +)))
172 172  
173 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
179 +(% style="display:none" %)
174 174  
181 +
182 +
183 +== 1.8 Mechanical ==
184 +
185 +
186 +[[image:1675143884058-338.png]]
187 +
188 +
189 +[[image:1675143899218-599.png]]
190 +
191 +
192 +[[image:1675143909447-639.png]]
193 +
194 +
195 += 2. Configure D2x-LB to connect to LoRaWAN network =
196 +
175 175  == 2.1 How it works ==
176 176  
177 177  
178 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
200 +The D2x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the D2x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
179 179  
180 180  
181 181  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
182 182  
183 183  
184 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
206 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
185 185  
208 +
186 186  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
187 187  
188 -[[image:image-20230522092858-1.png||height="391" width="874"]]
189 189  
212 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from D2x-LB.
190 190  
191 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
214 +Each D2x-LB is shipped with a sticker with the default device EUI as below:
192 192  
193 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
216 +[[image:image-20230131134744-2.jpeg]]
194 194  
195 -[[image:image-20230426085205-1.png||height="238" width="512"]]
196 196  
197 197  
198 198  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
199 199  
200 -(% style="display:none" %) (%%)
201 201  
202 202  (% style="color:blue" %)**Register the device**
203 203  
225 +[[image:1675144099263-405.png]]
204 204  
205 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)
206 206  
207 -
208 208  (% style="color:blue" %)**Add APP EUI and DEV EUI**
209 209  
210 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]
230 +[[image:1675144117571-832.png]]
211 211  
212 212  
213 213  (% style="color:blue" %)**Add APP EUI in the application**
214 214  
215 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]
216 216  
236 +[[image:1675144143021-195.png]]
217 217  
238 +
218 218  (% style="color:blue" %)**Add APP KEY**
219 219  
220 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
241 +[[image:1675144157838-392.png]]
221 221  
243 +(% style="color:blue" %)**Step 2:**(%%) Activate on D2x-LB
222 222  
223 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
224 224  
246 +Press the button for 5 seconds to activate the D2x-LB.
225 225  
226 -Press the button for 5 seconds to activate the DS03A-LB.
248 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
227 227  
228 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
229 -
230 230  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
231 231  
232 232  
... ... @@ -235,7 +235,7 @@
235 235  === 2.3.1 Device Status, FPORT~=5 ===
236 236  
237 237  
238 -Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
258 +Users can use the downlink command(**0x26 01**) to ask D2x-LB to send device configure detail, include device configure status. D2x-LB will uplink a payload via FPort=5 to server.
239 239  
240 240  The Payload format is as below.
241 241  
... ... @@ -247,10 +247,10 @@
247 247  
248 248  Example parse in TTNv3
249 249  
250 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609104802-1.png?rev=1.1||alt="image-20220609104802-1.png" height="393" width="1195"]]
270 +[[image:image-20230415153147-2.png||height="220" width="1120"]]
251 251  
252 252  
253 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For D2x-LB, this value is 0x19
254 254  
255 255  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
256 256  
... ... @@ -303,147 +303,121 @@
303 303  Ex2: 0x0B49 = 2889mV
304 304  
305 305  
306 -=== 2.3.2  Real-Time Open/Close Status, Uplink FPORT~=2 ===
326 +=== 2.3.2  Sensor Data. FPORT~=2 ===
307 307  
308 308  
309 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
329 +D2x-LB will uplink below payload via FPORT=2 after Joined LoRaWAN Network.
310 310  
311 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
312 -* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
331 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
332 +|=(% style="width: 62.5px;background-color:#D9E2F3" %)(((
333 +**Size(bytes)**
334 +)))|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 120px;background-color:#D9E2F3" %)2|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 65px;background-color:#D9E2F3" %)1|=(% style="width: 65px;background-color:#D9E2F3" %)**2**|=(% style="width: 65px;background-color:#D9E2F3" %)2
335 +|(% style="width:65px" %)**Value**|(((
336 +[[Battery>>||anchor="HBattery:"]]
337 +)))|(% style="width:91px" %)(((
338 +[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]
339 +)))|(% style="width:61px" %)(((
340 +ignore
341 +)))|(% style="width:91px" %)(((
342 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
343 +)))|(% style="width:99px" %)(((
344 +[[Temp_White>>||anchor="HTemperatureWhite:"]]
345 +)))|(% style="width:97px" %)(((
346 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
313 313  
314 -Uplink Payload totals 11 bytes.
348 +
349 +)))
315 315  
316 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
317 -|=(% colspan="5" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 522px;" %)**Real-Time Open/Close Status, FPORT=2**
318 -|(% style="width:95px" %)**Size(bytes)**|(% style="width:78px" %)**1**|(% style="width:98px" %)**3**|(% style="width:144px" %)**3**|(% style="width:108px" %)**4**
319 -|(% style="width:95px" %)**Value**|(% style="width:78px" %)Status & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]|(% style="width:98px" %)Total open door events|(% style="width:144px" %)(((
320 -The last door open duration (unit: min)
321 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
351 +**Payload per each model.**
322 322  
323 -**Status & Alarm:**
353 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220916152530-2.png?rev=1.1||alt="image-20220916152530-2.png" height="240" width="901"]]
324 324  
325 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
326 -|(% style="width:76px" %)**Size(bit)**|(% style="width:79px" %)**bit7**|(% style="width:81px" %)**bit6**|(% style="width:111px" %)**[bit5:bit2]**|(% style="width:197px" %)**bit1**|(% style="width:104px" %)**bit0**
327 -|(% style="width:76px" %)**Value**|(% style="width:79px" %)Reserve|(% style="width:81px" %)(((
328 -Poll
329 329  
330 -Message
356 +[[image:image-20230415154139-3.png||height="215" width="1179"]]
331 331  
332 -Flag
333 -)))|(% style="width:111px" %)Reserve|(% style="width:197px" %)[[Enable/disable Timeout Alarm>>||anchor="H3.3.3A0Enable2FDisableAlarm"]]
334 -0: No Alarm; 1: Alarm|(% style="width:104px" %)Status
335 -0: Close, 1: Open
336 336  
337 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110547-6.png?width=1191&height=337&rev=1.1||alt="image-20220609110547-6.png" height="337" width="1191"]]
359 +==== (% style="color:#4472c4" %)**Decode corresponding probe color：**(%%) ====
338 338  
361 +**D20:**
339 339  
340 -=== 2.3.3  Historical Door Open/Close Event, FPORT~=3 ===
363 +Red <~-~-> C1
341 341  
365 +**D22:**
342 342  
343 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
367 +White <~-~-> C1 Red <~-~-> C2
344 344  
345 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
369 +**D23:**
346 346  
347 -* (((
348 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
349 -)))
371 +White <~-~->C1 Red <~-~-> C2 Black <~-~-> C3
350 350  
351 -For example, in the US915 band, the max payload for different DR is:
352 352  
353 -(((
354 -**~1. DR0**: max is 11 bytes so one entry of data
355 -)))
356 356  
357 -(((
358 -**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
359 -)))
375 +==== (% style="color:#4472c4" %)**Battery:**(%%) ====
360 360  
361 -(((
362 -**3. DR2**: total payload includes 11 entries of data
363 -)))
377 +Sensor Battery Level.
364 364  
365 -(((
366 -**4. DR3**: total payload includes 22 entries of data.
367 -)))
379 +Ex1: 0x0B45 = 2885mV
368 368  
369 -If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
381 +Ex2: 0x0B49 = 2889mV
370 370  
371 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609112215-7.png?width=1250&height=277&rev=1.1||alt="image-20220609112215-7.png" height="277" width="1250"]]
372 372  
373 -**Downlink:**
374 374  
375 -0x31 61 8E 57 40 61 8E 81 70 05
385 +==== (% style="color:#4472c4" %)**Temperature RED or Temperature White :**(%%) ====
376 376  
387 +**This point to the Red probe in D20-LB or the probe of D22-LB/D23-LB White**
377 377  
378 -**Uplink:**
389 +**Example**:
379 379  
380 -00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50
391 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
381 381  
393 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
382 382  
383 -**Parsed Value:**
395 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
384 384  
385 -[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]
386 386  
387 387  
388 -[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],
399 +==== (% style="color:#4472c4" %)**Temperature White:**(%%) ====
389 389  
390 -[FALSE, OPEN,  1, 0, 2021-11-12 12:36:34],
391 391  
392 -[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],
402 +**This point to the Red probe in D22-LB/D23-LB**
393 393  
394 -[FALSE, OPEN,  2, 2, 2021-11-12 12:39:17],
395 395  
396 -[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],
405 +**Example**:
397 397  
398 -[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],
407 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
399 399  
400 -[FALSE, OPEN,  3, 1, 2021-11-12 14:50:32],
409 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
401 401  
402 -[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],
411 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
403 403  
404 -[FALSE, OPEN,  4, 2, 2021-11-12 14:58:35],
405 405  
406 -[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],
407 407  
415 +==== (% style="color:#4472c4" %)**Temperature Black:**(%%) ====
408 408  
409 -=== 2.3.4  Sensor Configuration, FPORT~=4 ===
410 410  
418 +**This point to the BLACK probe in D23-LB**
411 411  
412 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
413 413  
414 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
415 -|(% colspan="5" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
416 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**
417 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: min)
421 +**Example**:
418 418  
419 -* (((
420 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
421 -)))
423 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
422 422  
423 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
425 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
424 424  
427 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
425 425  
426 -* (((
427 -(% style="color:blue" %)**Disalarm: (default: 0)**
428 -)))
429 429  
430 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
431 431  
432 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
431 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
433 433  
434 434  
435 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
434 +**Example:**
436 436  
436 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
437 437  
438 -* (((
439 -(% style="color:blue" %)**Keep Status & Keep Time**
440 -)))
438 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
441 441  
442 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
443 443  
444 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110018-4.png?width=1159&height=291&rev=1.1||alt="image-20220609110018-4.png" height="291" width="1159"]]
445 -
446 -
447 447  == 2.4 Payload Decoder file ==
448 448  
449 449  
... ... @@ -459,26 +459,25 @@
459 459  == 2.5 Datalog Feature ==
460 460  
461 461  
462 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
456 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, D2x-LB will store the reading for future retrieving purposes.
463 463  
464 464  
465 465  === 2.5.1 Ways to get datalog via LoRaWAN ===
466 466  
467 467  
468 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
462 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], D2x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,D2x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
469 469  
470 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
471 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
464 +* a) D2x-LB will do an ACK check for data records sending to make sure every data arrive server.
465 +* b) D2x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but D2x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if D2x-LB gets a ACK, D2x-LB will consider there is a network connection and resend all NONE-ACK Message.
472 472  
473 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
467 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
474 474  
475 475  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
476 476  
477 -
478 478  === 2.5.2 Unix TimeStamp ===
479 479  
480 480  
481 -DS03A-LB uses Unix TimeStamp format based on
474 +D2x-LB uses Unix TimeStamp format based on
482 482  
483 483  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
484 484  
... ... @@ -496,55 +496,116 @@
496 496  
497 497  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
498 498  
499 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
492 +Once D2x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to D2x-LB. If D2x-LB fails to get the time from the server, D2x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
500 500  
501 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
494 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
502 502  
503 503  
504 -== 2.6 ​Show Data in DataCake IoT Server ==
497 +=== 2.5.4 Datalog Uplink payload  (FPORT~=3) ===
505 505  
506 506  
507 -Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
500 +The Datalog poll reply uplink will use below payload format.
508 508  
502 +**Retrieval data payload:**
509 509  
510 -(% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
504 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
505 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
506 +**Size(bytes)**
507 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 115px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 80px; background-color: rgb(217, 226, 243);" %)**4**
508 +|(% style="width:93px" %)**Value**|(% style="width:54px" %)(((
509 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
510 +)))|(% style="width:54px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:87px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:104px" %)Poll message flag & Ext|(% style="width:55px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
511 511  
512 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
512 +**Poll message flag & Ext:**
513 513  
514 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
514 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
515 515  
516 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
516 516  
517 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]
518 +**Poll Message Flag**: 1: This message is a poll message reply.
518 518  
520 +* Poll Message Flag is set to 1.
519 519  
520 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]
522 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
521 521  
524 +For example, in US915 band, the max payload for different DR is:
522 522  
523 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]
526 +**a) DR0:** max is 11 bytes so one entry of data
524 524  
528 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
525 525  
526 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]
530 +**c) DR2:** total payload includes 11 entries of data
527 527  
532 +**d) DR3: **total payload includes 22 entries of data.
528 528  
529 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]
534 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
530 530  
531 531  
532 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]
537 +**Example:**
533 533  
539 +If D2x-LB has below data inside Flash:
534 534  
535 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]
541 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
536 536  
543 +If user sends below downlink command: 3160065F9760066DA705
537 537  
538 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]
545 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
539 539  
547 + Stop time: 60066DA7= time 21/1/19 05:27:03
540 540  
541 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]
542 542  
550 +**D2x-LB will uplink this payload.**
543 543  
552 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
553 +
554 +(((
555 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
556 +)))
557 +
558 +(((
559 +Where the first 11 bytes is for the first entry:
560 +)))
561 +
562 +(((
563 +7FFF089801464160065F97
564 +)))
565 +
566 +(((
567 +**Ext sensor data**=0x7FFF/100=327.67
568 +)))
569 +
570 +(((
571 +**Temp**=0x088E/100=22.00
572 +)))
573 +
574 +(((
575 +**Hum**=0x014B/10=32.6
576 +)))
577 +
578 +(((
579 +**poll message flag & Ext**=0x41,means reply data,Ext=1
580 +)))
581 +
582 +(((
583 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
584 +)))
585 +
586 +
587 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
588 +
589 +== 2.6 Temperature Alarm Feature ==
590 +
591 +
592 +D2x-LB work flow with Alarm feature.
593 +
594 +
595 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
596 +
597 +
544 544  == 2.7 Frequency Plans ==
545 545  
546 546  
547 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
601 +The D2x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
548 548  
549 549  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
550 550  
... ... @@ -552,15 +552,17 @@
552 552  == 2.8 ​Firmware Change Log ==
553 553  
554 554  
555 -**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
609 +**Firmware download link:**
556 556  
611 +[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
557 557  
558 -= 3. Configure DS03A-LB =
559 559  
614 += 3. Configure D2x-LB =
615 +
560 560  == 3.1 Configure Methods: ==
561 561  
562 562  
563 -DS03A-LB supports below configure method:
619 +D2x-LB supports below configure method:
564 564  
565 565  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
566 566  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -580,10 +580,10 @@
580 580  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
581 581  
582 582  
583 -== 3.3 Commands special design for DS03A-LB ==
639 +== 3.3 Commands special design for D2x-LB ==
584 584  
585 585  
586 -These commands only valid for DS03A-LB, as below:
642 +These commands only valid for D2x-LB, as below:
587 587  
588 588  
589 589  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -594,7 +594,7 @@
594 594  (% style="color:blue" %)**AT Command: AT+TDC**
595 595  
596 596  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
597 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
653 +|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
598 598  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
599 599  30000
600 600  OK
... ... @@ -625,209 +625,119 @@
625 625  Sensor will upload Device Status via FPORT=5. See payload section for detail.
626 626  
627 627  
628 -=== 3.3.3  Enable / Disable Alarm ===
684 +=== 3.3.3 Set Alarm Thredhold ===
629 629  
630 630  
631 -Feature: Enable/Disable Alarm for open/close event. Default value 0.
687 +(% style="color:blue" %)**1.  Set for All Probes:**
632 632  
633 -(% style="color:blue" %)**AT Command: **
689 +(% style="color:#037691" %)**AT+18ALARM=min,max**
634 634  
635 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
636 -|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
637 -|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
638 -|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
691 +* When min=0, and max≠0, Alarm trigger when higher than max
692 +* When min≠0, and max=0, Alarm trigger when lower than min
693 +* When min≠0 and max≠0, Alarm trigger when higher than max or lower than min
639 639  
640 -(% style="color:blue" %)**Downlink Command: **
695 +**Example:**
641 641  
642 -0xA7 01  ~/~/ Same As AT+DISALARM=1
697 + AT+18ALARM=-10,30  ~/~/ Alarm when < -10 or higher than 30.
643 643  
644 -0xA7 00  ~/~/ Same As AT+DISALARM=0
645 645  
700 +* (% style="color:blue" %)**Downlink Payload:**
646 646  
647 -=== 3.3.4  Alarm Base on Timeout ===
702 +0x(0B F6 1E)   ~/~/ Same as AT+18ALARM=-10,30
648 648  
704 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
649 649  
650 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
651 651  
707 +(% style="color:blue" %)**2.  Set for Separate Probe:**
652 652  
653 -* (((
654 -(% style="color:blue" %)**Keep Status: Status to be monitor**
655 -)))
709 +(% style="color:#037691" %)**AT+18ALARM=min,max,index**
656 656  
657 -(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
711 +Index:
658 658  
659 -(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
713 +* 1: Temperature_Red
714 +* 2: Temperature_White
715 +* 3: Temperature_Black
660 660  
717 +**Example:**
661 661  
662 -* (((
663 -(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
664 -)))
719 + AT+18ALARM=-10,30,1   ~/~/ Alarm when temperature_red < -10 or higher than 30.
665 665  
666 -Range 0 ~~ 65535(0xFFFF) seconds.
667 667  
668 -If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
722 +* (% style="color:blue" %)**Downlink Payload:**
669 669  
670 -If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
724 +0x(0B F6 1E 01)   ~/~/ Same as AT+18ALARM=-10,30,1
671 671  
726 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
672 672  
673 -(% style="color:blue" %)**AT Command to configure:**
674 674  
675 -* (((
676 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
677 -)))
729 +=== 3.3.4 Set Alarm Interval ===
678 678  
679 -* (((
680 -(% style="color:#037691" %)**AT+TTRIG=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
681 -)))
682 682  
683 -(% style="color:blue" %)**Downlink Command to configure:**
732 +The shortest time of two Alarm packet. (unit: min)
684 684  
685 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc**
734 +* (% style="color:blue" %)**AT Command:**
686 686  
687 -**A9:** Command Type Code
736 +AT+ATDC=30  ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
688 688  
689 -**aa:** status to be monitored
690 690  
691 -**bb cc:** timeout.
739 +* (% style="color:blue" %)**Downlink Payload:**
692 692  
741 +0x(0D 00 1E)     **~-~-->** Set AT+ATDC=0x 00 1E = 30 minutes
693 693  
694 -If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
695 695  
696 -Or
744 +=== 3.3.5 Get Alarm settings  （什么FPORT?） ===
697 697  
698 -0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
699 699  
747 +Send a LoRaWAN downlink to ask device send Alarm settings.
700 700  
701 -=== 3.3.5  Count Mod ===
749 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
702 702  
751 +**Example:**
703 703  
704 -(% style="color:blue" %)**AT Command:**
753 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
705 705  
706 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
707 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
708 -|(% style="width:155px" %)(((
709 -AT+COUNTMOD=0
710 -)))|(% style="width:277px" %)(((
711 -the count value keeps accumulating mode
712 -)))|(% style="width:86px" %)(((
713 -OK
714 -)))
715 -|(% style="width:155px" %)(((
716 -AT+COUNTMOD=1
717 -)))|(% style="width:277px" %)(((
718 -the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
719 -)))|(% style="width:86px" %)(((
720 -OK
721 -)))
722 722  
723 -(% style="color:blue" %)**Downlink Command:**
756 +**Explain:**
724 724  
725 -Example:  0B aa  => AT+COUNTMOD = second byte
758 +* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
726 726  
727 727  
728 -=== 3.3.6  Interrupt Pin Channel Mod ===
761 +=== 3.3.6 Set Interrupt Mode ===
729 729  
730 730  
731 -(% style="color:blue" %)**AT Command:**
764 +Feature, Set Interrupt mode for GPIO_EXIT.
732 732  
733 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
734 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
735 -|(% style="width:155px" %)(((
736 -AT+TTRCHANNEL=1
737 -)))|(% style="width:288px" %)(((
738 -set as single channel, only use PB14 pin as interrupt pin.
739 -)))|(% style="width:44px" %)(((
740 -OK
741 -)))
742 -|(% style="width:155px" %)(((
743 -AT+TTRCHANNEL=2
744 -)))|(% style="width:288px" %)(((
745 -is set as dual channel, use PB14 pin and PB15 pin as interrupt pin.
746 -)))|(% style="width:44px" %)(((
747 -OK
748 -)))
766 +(% style="color:blue" %)**AT Command: AT+INTMOD**
749 749  
750 -(% style="color:blue" %)**Downlink Command:**
751 -
752 -Example:  0D aa => AT+TTRCHANNEL = second byte
753 -
754 -
755 -=== 3.3.7  Change the name of AT+TTRIG to AT+TTRIG1 ===
756 -
757 -
758 -(% style="color:blue" %)**Downlink Command:**
759 -
760 -Example:  A9 01 aa bb cc  => AT+TTRIG1= third byte, 4th byte and 5th byte
761 -
762 -
763 -=== 3.3.8  Added AT+TTRIG2 for PB15 pin ===
764 -
765 -
766 -(% style="color:blue" %)**Downlink Command:**
767 -
768 -Example: A9 02 aa bb cc  => AT+TTRIG2= third byte, 4th byte and 5th byte
769 -
770 -
771 -=== 3.3.9  TTRIG1/2 timeout status alarm ===
772 -
773 -
774 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
775 -
776 -(% style="color:blue" %)**AT Command:**
777 -
778 778  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
779 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
780 -|(% style="width:155px" %)(((
781 -AT+TTRALARM=0
782 -)))|(% style="width:279px" %)(((
783 -disable continuous alarm
784 -)))|(% style="width:84px" %)(((
769 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
770 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
771 +0
785 785  OK
773 +the mode is 0 =Disable Interrupt
786 786  )))
787 -|(% style="width:155px" %)(((
788 -AT+TTRALARM=60
789 -)))|(% style="width:279px" %)(((
790 -The alarm interval is 60 minutes (unit: minutes)
791 -)))|(% style="width:84px" %)(((
792 -OK
793 -)))
775 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
776 +Set Transmit Interval
777 +0. (Disable Interrupt),
778 +~1. (Trigger by rising and falling edge)
779 +2. (Trigger by falling edge)
780 +3. (Trigger by rising edge)
781 +)))|(% style="width:157px" %)OK
794 794  
795 -(% style="color:blue" %)**Downlink Command:**
783 +(% style="color:blue" %)**Downlink Command: 0x06**
796 796  
797 -Example:  0C aa  => AT+TTRALARM= aa
785 +Format: Command Code (0x06) followed by 3 bytes.
798 798  
787 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
799 799  
800 -=== 3.3.10  Select counting mode ===
789 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
790 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
801 801  
802 802  
803 -(% style="color:blue" %)**AT+TTRMODx=a,b**
804 -
805 -When (% style="color:#037691" %)**a=0**(%%), the door is opened to count, and when (% style="color:#037691" %)**a=1**(%%),the closed door is counted.
806 -
807 -When (% style="color:#037691" %)**b=0**(%%), it is the last door open duration, and when (% style="color:#037691" %)**b=1**(%%),the last door close duration.
808 -
809 -(% style="color:blue" %)**AT Command:**
810 -
811 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
812 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 278px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 77px;background-color:#D9E2F3;color:#0070C0" %)**Response**
813 -|(% style="width:155px" %)(((
814 -AT+TTRMODx=1,0
815 -)))|(% style="width:278px" %)Door closed count and record the last door opened duration|(% style="width:85px" %)(((
816 -OK
817 -)))
818 -|(% style="width:155px" %)(((
819 -AT+TTRMODx=0,1
820 -)))|(% style="width:278px" %)(((
821 -Door opened count and record the last door Door Door open closed duration
822 -)))|(% style="width:85px" %)(((
823 -OK
824 -)))
825 -
826 -
827 827  = 4. Battery & Power Consumption =
828 828  
829 829  
830 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
796 +D2x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
831 831  
832 832  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
833 833  
... ... @@ -835,7 +835,7 @@
835 835  = 5. OTA firmware update =
836 836  
837 837  
838 -User can change firmware DS03A-LB to:
804 +User can change firmware S31x-LB to:
839 839  
840 840  * Change Frequency band/ region.
841 841  * Update with new features.
... ... @@ -844,7 +844,7 @@
844 844  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
845 845  
846 846  
847 -**Methods to Update Firmware:**
813 +Methods to Update Firmware:
848 848  
849 849  * (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
850 850  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
... ... @@ -857,7 +857,7 @@
857 857  = 7. Order Info =
858 858  
859 859  
860 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
826 +Part Number: (% style="color:blue" %)**D20-LB-XX  / D22-LB-XX / D23-LB-XX**
861 861  
862 862  (% style="color:red" %)**XX**(%%): The default frequency band
863 863  
... ... @@ -883,7 +883,7 @@
883 883  
884 884  (% style="color:#037691" %)**Package Includes**:
885 885  
886 -* DS03A-LB LoRaWAN Temperature Sensor
852 +* D2x-LB LoRaWAN Temperature Sensor
887 887  
888 888  (% style="color:#037691" %)**Dimension and weight**:
889 889  
... ... @@ -901,4 +901,4 @@
901 901  
902 902  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
903 903  
904 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
870 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230426085205-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230516085523-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content
image-20230522092858-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522092934-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522093256-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0