Last modified by Mengting Qiu on 2025/07/03 16:36

From version 7.6
edited by Xiaoling
on 2023/05/22 11:35
Change comment: There is no comment for this version
To version 40.19
edited by Xiaoling
on 2024/01/08 17:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DS03A-LB Outdoor LoRaWAN Door Sensor User Manual
1 +DS03A-LB/LS -- Outdoor LoRaWAN Door Sensor User Manual
Content
... ... @@ -1,9 +1,18 @@
1 +(% style="display:none" %) (%%)
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
4 +[[image:image-20240108161155-2.png]]
3 3  
4 4  
5 -**Table of Contents:**
6 6  
8 +
9 +
10 +
11 +
12 +
13 +
14 +**Table of Contents:**
15 +
7 7  {{toc/}}
8 8  
9 9  
... ... @@ -13,41 +13,41 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
25 +== 1.1 What is LoRaWAN Door Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
29 +The Dragino DS03A-LB/LS is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33 +The LoRa wireless technology used in DS03A-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
37 +The DS03A-LB/LS will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB/LS can count each open event and uplink periodically.
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
41 +DS03A-LB/LS supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
45 +DS03A-LB/LS has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 37  
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
47 +DS03A-LB/LS is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
51 +DS03A-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
55 +DS03A-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or (% style="color:blue" %)**solar powered + li-on battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
59 +Each DS03A-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
... ... @@ -67,9 +67,10 @@
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 -* 8500mAh Battery for long term use
71 71  * Wall Mountable
72 72  * Outdoor Use
81 +* 8500mAh Li/SOCl2 Battery (DS03A-LB)
82 +* Solar panel + 3000mAh Li-on battery (DS03A-LS)
73 73  
74 74  == 1.3 Specification ==
75 75  
... ... @@ -76,14 +76,9 @@
76 76  
77 77  (% style="color:#037691" %)**Common DC Characteristics:**
78 78  
79 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
89 +* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
80 80  * Operating Temperature: -40 ~~ 85°C
81 81  
82 -(% style="color:#037691" %)**Sensor Detect Distance:**
83 -
84 -* Wood Door: 10mm ~~ 30mm
85 -* Iron Door: 30 ~~ 45mm
86 -
87 87  (% style="color:#037691" %)**LoRa Spec:**
88 88  
89 89  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -121,11 +121,10 @@
121 121  == 1.6 Button & LEDs ==
122 122  
123 123  
124 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
125 125  
126 -
127 127  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
128 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
132 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
129 129  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
130 130  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
131 131  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -140,7 +140,7 @@
140 140  == 1.7 BLE connection ==
141 141  
142 142  
143 -D2x-LB support BLE remote configure.
147 +DS03A-LB/LS support BLE remote configure.
144 144  
145 145  
146 146  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -152,27 +152,44 @@
152 152  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
153 153  
154 154  
155 -== 1.8 Mechanical ==
159 +== 1.8 Pin Definitions ==
156 156  
161 +[[image:image-20230630160843-7.png]]
157 157  
163 +
164 +== 1.9 Mechanical ==
165 +
166 +=== 1.9.1 for LB version ===
167 +
168 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS75-LB_LoRaWAN_Distance_Detection_Sensor_User_Manual/WebHome/image-20240105152536-3.png?rev=1.1||alt="image-20240105152536-3.png"]]
169 +
170 +
171 +(% style="color:blue" %)**Probe Mechanical:**
172 +
158 158  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
159 159  
160 160  
161 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
162 162  
177 +=== 1.9.2 for LS version ===
163 163  
164 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
165 165  
180 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
166 166  
167 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
168 168  
169 169  
170 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
171 171  
185 +== 1.10 Magnet Distance ==
186 +
187 +
188 +* Wood Door: 10mm ~~ 30mm
189 +* Iron Door: 30 ~~ 45mm
190 +
191 += 2. Configure DS03A-LB/LS to connect to LoRaWAN network =
192 +
172 172  == 2.1 How it works ==
173 173  
174 174  
175 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
196 +The DS03A-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
176 176  
177 177  
178 178  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -180,14 +180,14 @@
180 180  
181 181  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
182 182  
183 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
204 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
184 184  
185 185  [[image:image-20230522092858-1.png||height="391" width="874"]]
186 186  
187 187  
188 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
209 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB/LS.
189 189  
190 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
211 +Each DS03A-LB/LS is shipped with a sticker with the default device EUI as below:
191 191  
192 192  [[image:image-20230426085205-1.png||height="238" width="512"]]
193 193  
... ... @@ -217,10 +217,10 @@
217 217  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
218 218  
219 219  
220 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
241 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB/LS
221 221  
222 222  
223 -Press the button for 5 seconds to activate the DS03A-LB.
244 +Press the button for 5 seconds to activate the DS03A-LB/LS.
224 224  
225 225  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
226 226  
... ... @@ -232,54 +232,56 @@
232 232  === 2.3.1 Device Status, FPORT~=5 ===
233 233  
234 234  
235 -Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
256 +Include device configure status. Once DS03A-LB/LS Joined the network, it will uplink this message to the server. After that, DS03A-LB/LS will uplink Device Status every 12 hours.
236 236  
237 -The Payload format is as below.
258 +Users can also use the downlink command**(0x26 01)** to ask DS03A-LB/LS to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
238 238  
239 239  
261 +The Payload format is as below.
262 +
240 240  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
241 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
264 +|(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
242 242  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
243 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
266 +|(% style="width:103px" %)Value|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
244 244  
245 245  Example parse in TTNv3
246 246  
247 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609104802-1.png?rev=1.1||alt="image-20220609104802-1.png" height="393" width="1195"]]
270 +[[image:image-20230630155406-1.png||height="190" width="873"]]
248 248  
249 249  
250 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x0B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB/LS, this value is 0x1B
251 251  
252 252  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
253 253  
254 254  (% style="color:#037691" %)**Frequency Band**:
255 255  
256 -*0x01: EU868
279 +0x01: EU868
257 257  
258 -*0x02: US915
281 +0x02: US915
259 259  
260 -*0x03: IN865
283 +0x03: IN865
261 261  
262 -*0x04: AU915
285 +0x04: AU915
263 263  
264 -*0x05: KZ865
287 +0x05: KZ865
265 265  
266 -*0x06: RU864
289 +0x06: RU864
267 267  
268 -*0x07: AS923
291 +0x07: AS923
269 269  
270 -*0x08: AS923-1
293 +0x08: AS923-1
271 271  
272 -*0x09: AS923-2
295 +0x09: AS923-2
273 273  
274 -*0x0a: AS923-3
297 +0x0a: AS923-3
275 275  
276 -*0x0b: CN470
299 +0x0b: CN470
277 277  
278 -*0x0c: EU433
301 +0x0c: EU433
279 279  
280 -*0x0d: KR920
303 +0x0d: KR920
281 281  
282 -*0x0e: MA869
305 +0x0e: MA869
283 283  
284 284  
285 285  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -300,140 +300,327 @@
300 300  Ex2: 0x0B49 = 2889mV
301 301  
302 302  
303 -=== 2.3.2  Real-Time Open/Close Status, Uplink FPORT~=2 ===
326 +=== 2.3.2  Sensor Configuration, FPORT~=4 ===
304 304  
305 305  
306 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
329 +DS03A-LB/LS will only send this command after getting the downlink command **(0x26 02)** from the server.
307 307  
308 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
331 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
332 +|(% colspan="8" style="background-color:#4f81bd; color:white; width:515px" %)**Sensor Configuration FPORT=4**
333 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
334 +|Value|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
335 +Keep status1
336 +)))|(% style="width:99px" %)(((
337 +Keep time1(unit: sec)
338 +)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
339 +Keep time2(unit: sec)
340 +)))|(% style="width:98px" %)(((
341 +Alarm interval(unit: min)
342 +)))
343 +
344 +Example parse in TTNv3
345 +
346 +[[image:image-20230630155527-3.png||height="146" width="902"]]
347 +
348 +
349 +* (((
350 +(% style="color:blue" %)**TDC: (default: 0x001C20)**
351 +)))
352 +
353 +Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
354 +
355 +
356 +* (((
357 +(% style="color:blue" %)**Disalarm: (default: 0)**
358 +)))
359 +
360 + **If Disalarm = 1**, DS03A-LB/LS will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
361 +
362 + **If Disalarm = 0**, DS03A-LB/LS will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
363 +
364 +
365 +(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
366 +
367 +
368 +* (((
369 +(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
370 +)))
371 +
372 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
373 +
374 +
375 +
376 +* (((
377 +(% style="color:blue" %)**Alarm interval(default: 0)**
378 +)))
379 +
380 +When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
381 +
382 +
383 +=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
384 +
385 +
386 +DS03A-LB/LS will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB/LS will send uplinks when:
387 +
388 +* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
309 309  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
310 310  
311 -Uplink Payload totals 11 bytes.
391 +**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
312 312  
313 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
314 -|=(% colspan="5" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 522px;" %)**Real-Time Open/Close Status, FPORT=2**
315 -|(% style="width:95px" %)**Size(bytes)**|(% style="width:78px" %)**1**|(% style="width:98px" %)**3**|(% style="width:144px" %)**3**|(% style="width:108px" %)**4**
316 -|(% style="width:95px" %)**Value**|(% style="width:78px" %)Status & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]|(% style="width:98px" %)Total open door events|(% style="width:144px" %)(((
317 -The last door open duration (unit: min)
393 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
394 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
395 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
396 +|(% style="width:95px" %)Value|(% style="width:97px" %)(((
397 +Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
398 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
399 +The last door open duration (unit: sec)
318 318  )))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
319 319  
320 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:518.818px" %)
321 -|=(% colspan="4" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 516px;" %)**Status & Alarm field**
322 -|(% style="width:76px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:240px" %)**1**|(% style="width:130px" %)**1**
323 -|(% style="width:76px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:240px" %)[[Enable/disable Timeout Alarm>>||anchor="H3.3.3A0Enable2FDisableAlarm"]]
324 -0: No Alarm; 1: Alarm|(% style="width:130px" %)Status
325 -0: Close, 1: Open
402 +**Status & Alarm:**
326 326  
327 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110547-6.png?width=1191&height=337&rev=1.1||alt="image-20220609110547-6.png" height="337" width="1191"]]
404 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
405 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:120px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**bit0**
406 +|(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
407 +Count mod
408 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
409 +Alarm 0: No Alarm; 1: Alarm
410 +)))|(% style="width:131px" %)(((
411 +Status 0: Close; 1: Open
412 +)))
328 328  
414 +[[image:image-20230630155451-2.png||height="246" width="928"]]
329 329  
330 -=== 2.3.3  Historical Door Open/Close Event, FPORT~=3 ===
331 331  
417 +* (((
418 +(% style="color:blue" %)**Count mod:Default=0**
419 +)))
332 332  
333 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
421 +0: Uplink total open door times since factory
334 334  
335 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
423 +1: Uplink total open door times since last FPORT=2 uplink.
336 336  
425 +
426 +* (% style="color:blue" %)**TDC flag**
427 +
428 +When the flag is 1, it means sending packets at normal time intervals.
429 +
430 +Otherwise, it is a packet sent at non-TDC time.
431 +
432 +
337 337  * (((
338 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
434 +(% style="color:#0000ff" %)**Alarm**
339 339  )))
340 340  
341 -For example, in the US915 band, the max payload for different DR is:
437 +See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
342 342  
343 -(((
344 -**~1. DR0**: max is 11 bytes so one entry of data
345 -)))
346 346  
347 -(((
348 -**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
440 +* (((
441 +(% style="color:blue" %)**Status**
349 349  )))
350 350  
351 -(((
352 -**3. DR2**: total payload includes 11 entries of data
444 +This bit is 1 when the door sensor is open and 0 when it is close.
445 +
446 +
447 +* (((
448 +(% style="color:blue" %)**Total open door events**
353 353  )))
354 354  
355 -(((
356 -**4. DR3**: total payload includes 22 entries of data.
451 +Total pulse/counting base on open door.
452 +
453 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
454 +
455 +
456 +* (((
457 +(% style="color:blue" %)**The last door open duration**
357 357  )))
358 358  
359 -If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
460 +Door sensor last open duration.
360 360  
361 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609112215-7.png?width=1250&height=277&rev=1.1||alt="image-20220609112215-7.png" height="277" width="1250"]]
462 +Unit: sec.
362 362  
363 -**Downlink:**
464 +[[image:image-20230701094042-1.png||height="154" width="763"]]
364 364  
365 -0x31 61 8E 57 40 61 8E 81 70 05
366 366  
467 +**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).
367 367  
368 -**Uplink:**
469 +(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
369 369  
370 -00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50
471 +(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
371 371  
473 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
474 +|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
475 +|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
476 +|(% style="width:95px" %)Value|(% style="width:97px" %)(((
477 +Status1 & Alarm1
478 +)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
479 +The last door open duration1 (unit: sec)
480 +)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
481 +Status2 & Alarm2
482 +)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
372 372  
373 -**Parsed Value:**
484 +**Status1 & Alarm1:**
374 374  
375 -[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]
486 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
487 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit0**
488 +|(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
489 +Count mod
490 +)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
491 +Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
492 +)))|(% style="width:181px" %)(((
493 +Status1 0: Close; 1: Open (PA8 of pin)
494 +)))
376 376  
496 +**Status2 & Alarm2:**
377 377  
378 -[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],
498 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
499 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit2]**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit0**
500 +|(% style="width:76px" %)Value|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
501 +Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
502 +)))|(% style="width:181px" %)(((
503 +Status2 0: Close; 1: Open (PA4 of pin)
504 +)))
379 379  
380 -[FALSE, OPEN,  1, 0, 2021-11-12 12:36:34],
506 +[[image:image-20230630155908-6.png||height="295" width="927"]]
381 381  
382 -[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],
383 383  
384 -[FALSE, OPEN,  2, 2, 2021-11-12 12:39:17],
509 +* (((
510 +(% style="color:blue" %)**Count mod:Default=0**
511 +)))
385 385  
386 -[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],
513 +0: Uplink total open door times since factory
387 387  
388 -[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],
515 +1: Uplink total open door times since last FPORT=2 uplink.
389 389  
390 -[FALSE, OPEN,  3, 1, 2021-11-12 14:50:32],
391 391  
392 -[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],
518 +* (% style="color:blue" %)**TDC flag**
393 393  
394 -[FALSE, OPEN,  4, 2, 2021-11-12 14:58:35],
520 +When the flag is 1, it means sending packets at normal time intervals.
395 395  
396 -[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],
522 +Otherwise, it is a packet sent at non-TDC time.
397 397  
398 398  
399 -=== 2.3.4  Sensor Configuration, FPORT~=4 ===
525 +* (((
526 +(% style="color:#0000ff" %)**Alarm1 or Alarm2**
527 +)))
400 400  
529 +See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
401 401  
402 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
403 403  
404 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
405 -|(% colspan="5" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
406 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**
407 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: min)
532 +* (((
533 +(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
534 +)))
408 408  
536 +This bit is 1 when the door sensor is open and 0 when it is close.
537 +
538 +
409 409  * (((
410 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
540 +(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
411 411  )))
412 412  
413 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
543 +Total pulse/counting base on open door.
414 414  
545 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
415 415  
547 +
416 416  * (((
417 -(% style="color:blue" %)**Disalarm: (default: 0)**
549 +(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
418 418  )))
419 419  
420 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
552 +Door sensor last open duration.
421 421  
422 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
554 +Unit: sec.
423 423  
556 +[[image:image-20230701094042-1.png||height="154" width="763"]]
424 424  
425 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
426 426  
559 +=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
427 427  
561 +
562 +DS03A-LB/LS stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
563 +
564 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
565 +
566 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
567 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
568 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
569 +|(% style="width:95px" %)Value|(% style="width:97px" %)(((
570 +Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
571 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
572 +The last door open duration (unit: sec)
573 +)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
574 +
575 +**Status & Alarm:**
576 +
577 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
578 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:50px" %)**[bit5:bit4]**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit0**
579 +|(% style="width:76px" %)Value|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
580 +Count mod
581 +)))|(% style="width:95px" %)(((
582 +TDC flag 0:No; 1:Yes
583 +)))|(% style="width:116px" %)(((
584 +Alarm 0: No Alarm; 1: Alarm
585 +)))|(% style="width:112px" %)(((
586 +Status 0:Close; 1: Open
587 +)))
588 +
428 428  * (((
429 -(% style="color:blue" %)**Keep Status & Keep Time**
590 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB/LS will send max bytes according to the current DR and Frequency bands.
430 430  )))
431 431  
432 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
593 +For example, in the US915 band, the max payload for different DR is:
433 433  
434 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110018-4.png?width=1159&height=291&rev=1.1||alt="image-20220609110018-4.png" height="291" width="1159"]]
595 +(((
596 +**~1. DR0**: max is 11 bytes so one entry of data
597 +)))
435 435  
599 +(((
600 +**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
601 +)))
436 436  
603 +(((
604 +**3. DR2**: total payload includes 11 entries of data
605 +)))
606 +
607 +(((
608 +**4. DR3**: total payload includes 22 entries of data.
609 +)))
610 +
611 +If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
612 +
613 +[[image:image-20230630155556-4.png||height="146" width="938"]]
614 +
615 +**Downlink:**
616 +
617 +0x31 64 9E 7D 34 64 9E 7E 9C 05
618 +
619 +
620 +**Uplink:**
621 +
622 +45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
623 +
624 +
625 +**Parsed Value:**
626 +
627 +[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
628 +
629 +
630 +[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
631 +
632 +[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
633 +
634 +[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
635 +
636 +[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
637 +
638 +[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
639 +
640 +[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
641 +
642 +[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
643 +
644 +[[image:image-20230630172740-1.png||height="199" width="868"]]
645 +
646 +
437 437  == 2.4 Payload Decoder file ==
438 438  
439 439  
... ... @@ -449,26 +449,24 @@
449 449  == 2.5 Datalog Feature ==
450 450  
451 451  
452 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
662 +(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB/LS will store the reading for future retrieving purposes.
453 453  
664 +(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
454 454  
666 +
455 455  === 2.5.1 Ways to get datalog via LoRaWAN ===
456 456  
457 457  
458 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
670 +Set PNACKMD=1, DS03A-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network, DS03A-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
459 459  
460 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
461 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
672 +* a) DS03A-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
673 +* b) DS03A-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB/LS gets a ACK, DS03A-LB/LS will consider there is a network connection and resend all NONE-ACK Message.
462 462  
463 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
464 464  
465 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
466 -
467 -
468 468  === 2.5.2 Unix TimeStamp ===
469 469  
470 470  
471 -DS03A-LB uses Unix TimeStamp format based on
679 +DS03A-LB/LS uses Unix TimeStamp format based on
472 472  
473 473  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
474 474  
... ... @@ -486,7 +486,7 @@
486 486  
487 487  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
488 488  
489 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
697 +Once DS03A-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB/LS. If DS03A-LB/LS fails to get the time from the server, DS03A-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
490 490  
491 491  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
492 492  
... ... @@ -499,7 +499,7 @@
499 499  
500 500  (% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
501 501  
502 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
710 +(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB/LS in Datacake.**
503 503  
504 504  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
505 505  
... ... @@ -534,7 +534,7 @@
534 534  == 2.7 Frequency Plans ==
535 535  
536 536  
537 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
745 +The DS03A-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
538 538  
539 539  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
540 540  
... ... @@ -545,12 +545,12 @@
545 545  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
546 546  
547 547  
548 -= 3. Configure DS03A-LB =
756 += 3. Configure DS03A-LB/LS =
549 549  
550 550  == 3.1 Configure Methods: ==
551 551  
552 552  
553 -DS03A-LB supports below configure method:
761 +DS03A-LB/LS supports below configure method:
554 554  
555 555  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
556 556  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -569,13 +569,13 @@
569 569  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
570 570  
571 571  
572 -== 3.3 Commands special design for DS03A-LB ==
780 +== 3.3 Commands special design for DS03A-LB/LS ==
573 573  
574 574  
575 -These commands only valid for DS03A-LB, as below:
783 +These commands only valid for DS03A-LB/LS, as below:
576 576  
577 577  
578 -=== 3.3.1 Set Transmit Interval Time ===
786 +=== 3.3.1  Set Transmit Interval Time ===
579 579  
580 580  
581 581  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -583,7 +583,7 @@
583 583  (% style="color:blue" %)**AT Command: AT+TDC**
584 584  
585 585  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
586 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
794 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
587 587  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
588 588  30000
589 589  OK
... ... @@ -603,16 +603,36 @@
603 603  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
604 604  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
605 605  
606 -=== 3.3.2 Get Device Status ===
814 +=== 3.3.2  Set Power Output Duration ===
607 607  
608 608  
609 -Send a LoRaWAN downlink to ask device send Alarm settings.
817 +Control the output duration 5V . Before each sampling, device will
610 610  
611 -* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
819 +~1. first enable the power output to external sensor,
612 612  
613 -Sensor will upload Device Status via FPORT=5. See payload section for detail.
821 +2. keep it on as per duration, read sensor value and construct uplink payload
614 614  
823 +3. final, close the power output.
615 615  
825 +(% style="color:blue" %)**AT Command: AT+5VT**
826 +
827 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
828 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 204px; background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color: #4F81BD;color:white; width: 149px;" %)**Response**
829 +|(% style="width:156px" %)AT+5VT=?|(% style="width:204px" %)Show 5V open time.|(% style="width:149px" %)0 (default)
830 +OK
831 +|(% style="width:156px" %)AT+5VT=500|(% style="width:204px" %)Close after a delay of 500 milliseconds.|(% style="width:149px" %)(((
832 +OK
833 +
834 +)))
835 +
836 +(% style="color:blue" %)**Downlink Command: 0x07**(%%)
837 +Format: Command Code (0x07) followed by 2 bytes.
838 +
839 +The first and second bytes are the time to turn on.
840 +
841 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
842 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
843 +
616 616  === 3.3.3  Enable / Disable Alarm ===
617 617  
618 618  
... ... @@ -620,8 +620,8 @@
620 620  
621 621  (% style="color:blue" %)**AT Command: **
622 622  
623 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
624 -|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
851 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
852 +|(% style="background-color:#4f81bd; color:white; width:153px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:276px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
625 625  |(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
626 626  |(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
627 627  
... ... @@ -635,9 +635,8 @@
635 635  === 3.3.4  Alarm Base on Timeout ===
636 636  
637 637  
638 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
866 +DS03A-LB/LS can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
639 639  
640 -
641 641  * (((
642 642  (% style="color:blue" %)**Keep Status: Status to be monitor**
643 643  )))
... ... @@ -658,42 +658,104 @@
658 658  If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
659 659  
660 660  
888 +* (((
889 +(% style="color:blue" %)**Downlink Command**
890 +)))
891 +
892 +(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
893 +
894 +**A9:** Command Type Code
895 +
896 +**aa: **01:TTRIG1; 02:TTRIG2
897 +
898 +**bb:** status to be monitored
899 +
900 +**cc dd:** timeout.
901 +
902 +
903 +**1) AT+TTRIG1 : (PA8 of pin)**
904 +
661 661  (% style="color:blue" %)**AT Command to configure:**
662 662  
663 663  * (((
664 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
908 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
909 +
910 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
665 665  )))
666 666  
667 667  * (((
668 -(% style="color:#037691" %)**AT+TTRIG=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
914 +(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
915 +
916 +
917 +
669 669  )))
670 670  
671 671  (% style="color:blue" %)**Downlink Command to configure:**
672 672  
673 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc**
922 +If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
674 674  
675 -**A9:** Command Type Code
676 676  
677 -**aa:** status to be monitored
925 +**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**
678 678  
679 -**bb cc:** timeout.
927 +(% style="color:blue" %)**AT Command to configure:**
680 680  
929 +* (((
930 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
681 681  
682 -If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
932 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
933 +)))
683 683  
684 -Or
935 +* (((
936 +(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
685 685  
686 -0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
687 687  
939 +
940 +)))
688 688  
689 -=== 3.3.5  Count Mod ===
942 +(% style="color:blue" %)**Downlink Command to configure:**
690 690  
944 +If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
691 691  
946 +
947 +=== 3.3.5  TTRIG1 & TTRIG2 timeout status alarm ===
948 +
949 +
950 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
951 +
692 692  (% style="color:blue" %)**AT Command:**
693 693  
694 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
695 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
954 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
955 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**
696 696  |(% style="width:155px" %)(((
957 +AT+TTRALARM=0
958 +)))|(% style="width:279px" %)(((
959 +disable continuous alarm
960 +)))|(% style="width:84px" %)(((
961 +OK
962 +)))
963 +|(% style="width:155px" %)(((
964 +AT+TTRALARM=60
965 +)))|(% style="width:279px" %)(((
966 +The alarm interval is 60 minutes (unit: minutes)
967 +)))|(% style="width:84px" %)(((
968 +OK
969 +)))
970 +
971 +(% style="color:blue" %)**Downlink Command:**
972 +
973 +Example:  0C aa  => AT+TTRALARM= aa
974 +
975 +
976 +=== 3.3.6  Count Mod ===
977 +
978 +
979 +Feature: Manually set the count mode.
980 +
981 +(% style="color:blue" %)**AT Command:**
982 +
983 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
984 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
985 +|(% style="width:155px" %)(((
697 697  AT+COUNTMOD=0
698 698  )))|(% style="width:277px" %)(((
699 699  the count value keeps accumulating mode
... ... @@ -703,7 +703,7 @@
703 703  |(% style="width:155px" %)(((
704 704  AT+COUNTMOD=1
705 705  )))|(% style="width:277px" %)(((
706 -the count value will be reset after each TDC timeLast Close Duration Reset after each uplink
995 +the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)
707 707  )))|(% style="width:86px" %)(((
708 708  OK
709 709  )))
... ... @@ -713,24 +713,26 @@
713 713  Example:  0B aa  => AT+COUNTMOD = second byte
714 714  
715 715  
716 -=== 3.3.6  Interrupt Pin Channel Mod ===
1005 +=== 3.3.7  Number of channel of door sensors ===
717 717  
718 718  
1008 +Feature: Set the number of door sensor channels.
1009 +
719 719  (% style="color:blue" %)**AT Command:**
720 720  
721 721  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
722 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1013 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
723 723  |(% style="width:155px" %)(((
724 724  AT+TTRCHANNEL=1
725 -)))|(% style="width:288px" %)(((
726 -set as single channel, only use PB14 pin as interrupt pin.
1016 +)))|(% style="width:259px" %)(((
1017 +Set as single channel, only use PA8 pin as interrupt pin.
727 727  )))|(% style="width:44px" %)(((
728 728  OK
729 729  )))
730 730  |(% style="width:155px" %)(((
731 731  AT+TTRCHANNEL=2
732 -)))|(% style="width:288px" %)(((
733 -is set as dual channel, use PB14 pin and PB15 pin as interrupt pin.
1023 +)))|(% style="width:259px" %)(((
1024 +Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
734 734  )))|(% style="width:44px" %)(((
735 735  OK
736 736  )))
... ... @@ -740,81 +740,96 @@
740 740  Example:  0D aa => AT+TTRCHANNEL = second byte
741 741  
742 742  
743 -=== 3.3.7  Change the name of AT+TTRIG to AT+TTRIG1 ===
1034 +=== 3.3.8  Set Time Sync Mode ===
744 744  
745 745  
746 -(% style="color:blue" %)**Downlink Command:**
1037 +Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
747 747  
748 -Example A9 01 aa bb cc  => AT+TTRIG1= third byte, 4th byte and 5th byte
1039 +SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
749 749  
1041 +(% style="color:blue" %)**AT Command:**
750 750  
751 -=== 3.3.8  Added AT+TTRIG2 for PB15 pin ===
1043 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1044 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1045 +|(% style="width:155px" %)(((
1046 +AT+SYNCMOD=1
1047 +)))|(% style="width:259px" %)(((
1048 +Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
1049 +)))|(% style="width:44px" %)(((
1050 +OK
1051 +)))
1052 +|(% style="width:155px" %)(((
1053 +AT+SYNCMOD=1,8
1054 +)))|(% style="width:259px" %)(((
1055 +Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
1056 +)))|(% style="width:44px" %)(((
1057 +OK
1058 +)))
1059 +|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
752 752  
753 -
754 754  (% style="color:blue" %)**Downlink Command:**
755 755  
756 -Example: A9 02 aa bb cc  => AT+TTRIG2= third byte, 4th byte and 5th byte
1063 +0x28 0 ~/~/ Same As AT+SYNCMOD=1
757 757  
1065 +0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
758 758  
759 -=== 3.3.9  TTRIG1/2 timeout status alarm ===
1067 +0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
760 760  
1069 +0x28 00  ~/~/ Same As AT+SYNCMOD=0
761 761  
762 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
763 763  
1072 +=== 3.3.9  Clear the open door times and the duration of the last open door ===
1073 +
1074 +
764 764  (% style="color:blue" %)**AT Command:**
765 765  
766 766  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
767 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
768 -|(% style="width:155px" %)(((
769 -AT+TTRALARM=0
770 -)))|(% style="width:279px" %)(((
771 -disable continuous alarm
772 -)))|(% style="width:84px" %)(((
1078 +|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1079 +|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
773 773  OK
774 774  )))
775 -|(% style="width:155px" %)(((
776 -AT+TTRALARM=60
777 -)))|(% style="width:279px" %)(((
778 -The alarm interval is 60 minutes (unit: minutes)
779 -)))|(% style="width:84px" %)(((
780 -OK
781 -)))
782 782  
783 -(% style="color:blue" %)**Downlink Command:**
1083 +(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
784 784  
785 -Example 0C aa  => AT+TTRALARM= aa
1085 +The sensor will clear the open door times and the duration of the last open door.
786 786  
787 787  
788 -=== 3.3.10  Select counting mode ===
1088 +=== 3.3.10  Set the count value of the number of open door ===
789 789  
790 790  
791 -(% style="color:blue" %)**AT+TTRMODx=a,b**
792 -
793 -When (% style="color:#037691" %)**a=0**(%%), the door is opened to count, and when (% style="color:#037691" %)**a=1**(%%),the closed door is counted.
794 -
795 -When (% style="color:#037691" %)**b=0**(%%), it is the last door open duration, and when (% style="color:#037691" %)**b=1**(%%),the last door close duration.
796 -
797 797  (% style="color:blue" %)**AT Command:**
798 798  
799 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
800 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 278px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 77px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1093 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1094 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
801 801  |(% style="width:155px" %)(((
802 -AT+TTRMODx=1,0
803 -)))|(% style="width:278px" %)Door closed count and record the last door opened duration|(% style="width:85px" %)(((
1096 +AT+SETCNT=1,100
1097 +)))|(% style="width:259px" %)(((
1098 +Set the open door times of PA8 pin to 100 times.
1099 +)))|(% style="width:44px" %)(((
804 804  OK
805 805  )))
1102 +|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
806 806  |(% style="width:155px" %)(((
807 -AT+TTRMODx=0,1
808 -)))|(% style="width:278px" %)(((
809 -Door opened count and record the last door Door Door open closed duration
810 -)))|(% style="width:85px" %)(((
1104 +AT+SETCNT=2,50
1105 +)))|(% style="width:259px" %)(((
1106 +Set the open door times of PA4 pin to 100 times.
1107 +)))|(% style="width:44px" %)(((
811 811  OK
812 812  )))
813 813  
1111 +(% style="color:blue" %)**Downlink Command:**
1112 +
1113 +0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
1114 +
1115 +0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1116 +
1117 +0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1118 +
1119 +
814 814  = 4. Battery & Power Consumption =
815 815  
816 816  
817 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1123 +DS03A-LB use ER26500 + SPC1520 battery pack and DS03A-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
818 818  
819 819  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
820 820  
... ... @@ -822,7 +822,7 @@
822 822  = 5. OTA firmware update =
823 823  
824 824  
825 -User can change firmware DS03A-LB to:
1131 +User can change firmware DS03A-LB/LS to:
826 826  
827 827  * Change Frequency band/ region.
828 828  * Update with new features.
... ... @@ -830,11 +830,10 @@
830 830  
831 831  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
832 832  
833 -
834 834  Methods to Update Firmware:
835 835  
836 -* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
837 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1141 +* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1142 +* Update through UART TTL interface**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
838 838  
839 839  = 6. FAQ =
840 840  
... ... @@ -843,7 +843,7 @@
843 843  = 7. Order Info =
844 844  
845 845  
846 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
1151 +**Part Number: (% style="color:blue" %)DS03A-LB-XX (%%)or (% style="color:blue" %)DS03A-LS-XX(%%)**
847 847  
848 848  (% style="color:red" %)**XX**(%%): The default frequency band
849 849  
... ... @@ -868,7 +868,7 @@
868 868  
869 869  (% style="color:#037691" %)**Package Includes**:
870 870  
871 -* DS03A-LB LoRaWAN Temperature Sensor
1176 +* DS03A-LB or DS03A-LS LoRaWAN Temperature Sensor
872 872  
873 873  (% style="color:#037691" %)**Dimension and weight**:
874 874  
image-20230630155406-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230630155451-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +77.2 KB
Content
image-20230630155527-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +39.2 KB
Content
image-20230630155556-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +38.4 KB
Content
image-20230630155751-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +511.7 KB
Content
image-20230630172740-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20230701094042-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +34.5 KB
Content
image-20240108160443-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +500.2 KB
Content
image-20240108161155-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +265.7 KB
Content