Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 42.1 >
edited by Xiaoling
on 2024/09/11 17:44
To version < 40.10 >
edited by Xiaoling
on 2024/01/08 16:26
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -72,7 +72,6 @@
72 72  * Door Open/Close detect
73 73  * Door open/close statistics
74 74  * Datalog Feature, Open Alarm Feature
75 -* Probe length: 40cm
76 76  * Support Bluetooth v5.1 and LoRaWAN remote configure
77 77  * Support wireless OTA update firmware
78 78  * Uplink on periodically
... ... @@ -130,7 +130,7 @@
130 130  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
131 131  
132 132  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
133 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
132 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 226px;background-color:#D9E2F3;color:#0070C0" %)**Action**
134 134  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
135 135  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
136 136  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -169,7 +169,7 @@
169 169  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS75-LB_LoRaWAN_Distance_Detection_Sensor_User_Manual/WebHome/image-20240105152536-3.png?rev=1.1||alt="image-20240105152536-3.png"]]
170 170  
171 171  
172 -(% style="color:blue" %)**Probe Mechanical:**
171 +**Probe Mechanical:**
173 173  
174 174  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
175 175  
... ... @@ -262,9 +262,9 @@
262 262  The Payload format is as below.
263 263  
264 264  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
265 -|(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
264 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
266 266  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
267 -|(% style="width:103px" %)Value|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
266 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
268 268  
269 269  Example parse in TTNv3
270 270  
... ... @@ -330,9 +330,9 @@
330 330  DS03A-LB/LS will only send this command after getting the downlink command **(0x26 02)** from the server.
331 331  
332 332  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
333 -|(% colspan="8" style="background-color:#4f81bd; color:white; width:515px" %)**Sensor Configuration FPORT=4**
332 +|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
334 334  |**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
335 -|Value|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
334 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
336 336  Keep status1
337 337  )))|(% style="width:99px" %)(((
338 338  Keep time1(unit: sec)
... ... @@ -392,9 +392,9 @@
392 392  **1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
393 393  
394 394  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
395 -|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
394 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
396 396  |(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
397 -|(% style="width:95px" %)Value|(% style="width:97px" %)(((
396 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
398 398  Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
399 399  )))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
400 400  The last door open duration (unit: sec)
... ... @@ -403,7 +403,7 @@
403 403  **Status & Alarm:**
404 404  
405 405  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
406 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:120px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:105px" %)**bit0**
405 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
407 407  |(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
408 408  Count mod
409 409  )))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
... ... @@ -472,9 +472,9 @@
472 472  (% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
473 473  
474 474  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
475 -|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
474 +|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
476 476  |(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
477 -|(% style="width:95px" %)Value|(% style="width:97px" %)(((
476 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
478 478  Status1 & Alarm1
479 479  )))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
480 480  The last door open duration1 (unit: sec)
... ... @@ -485,7 +485,7 @@
485 485  **Status1 & Alarm1:**
486 486  
487 487  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
488 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit4]**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:100px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:117px" %)**bit0**
487 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
489 489  |(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
490 490  Count mod
491 491  )))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
... ... @@ -497,7 +497,7 @@
497 497  **Status2 & Alarm2:**
498 498  
499 499  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
500 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**[bit7:bit2]**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:200px" %)**bit0**
499 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
501 501  |(% style="width:76px" %)Value|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
502 502  Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
503 503  )))|(% style="width:181px" %)(((
... ... @@ -565,9 +565,9 @@
565 565  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
566 566  
567 567  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
568 -|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
567 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
569 569  |(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
570 -|(% style="width:95px" %)Value|(% style="width:97px" %)(((
569 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
571 571  Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
572 572  )))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
573 573  The last door open duration (unit: sec)
... ... @@ -576,7 +576,7 @@
576 576  **Status & Alarm:**
577 577  
578 578  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
579 -|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:50px" %)**[bit5:bit4]**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:70px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:80px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:75px" %)**bit0**
578 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
580 580  |(% style="width:76px" %)Value|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
581 581  Count mod
582 582  )))|(% style="width:95px" %)(((
... ... @@ -673,6 +673,11 @@
673 673  * a) DS03A-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
674 674  * b) DS03A-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB/LS gets a ACK, DS03A-LB/LS will consider there is a network connection and resend all NONE-ACK Message.
675 675  
675 +Below is the typical case for the Datalog Feature (Set PNACKMD=1)
676 +
677 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
678 +
679 +
676 676  === 2.5.2 Unix TimeStamp ===
677 677  
678 678  
... ... @@ -694,7 +694,7 @@
694 694  
695 695  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
696 696  
697 -Once DS03A-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB/LS. If DS03A-LB/LS fails to get the time from the server, DS03A-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
701 +Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
698 698  
699 699  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
700 700  
... ... @@ -707,7 +707,7 @@
707 707  
708 708  (% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
709 709  
710 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB/LS in Datacake.**
714 +(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
711 711  
712 712  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
713 713  
... ... @@ -742,7 +742,7 @@
742 742  == 2.7 Frequency Plans ==
743 743  
744 744  
745 -The DS03A-LB/LS uses OTAA mode and below frequency plans by default. Each frequency band use different firmware, user update the firmware to the corresponding band for their country.
749 +The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
746 746  
747 747  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
748 748  
... ... @@ -753,12 +753,12 @@
753 753  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
754 754  
755 755  
756 -= 3. Configure DS03A-LB/LS =
760 += 3. Configure DS03A-LB =
757 757  
758 758  == 3.1 Configure Methods: ==
759 759  
760 760  
761 -DS03A-LB/LS supports below configure method:
765 +DS03A-LB supports below configure method:
762 762  
763 763  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
764 764  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -777,10 +777,10 @@
777 777  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
778 778  
779 779  
780 -== 3.3 Commands special design for DS03A-LB/LS ==
784 +== 3.3 Commands special design for DS03A-LB ==
781 781  
782 782  
783 -These commands only valid for DS03A-LB/LS, as below:
787 +These commands only valid for DS03A-LB, as below:
784 784  
785 785  
786 786  === 3.3.1  Set Transmit Interval Time ===
... ... @@ -791,7 +791,7 @@
791 791  (% style="color:blue" %)**AT Command: AT+TDC**
792 792  
793 793  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
794 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
798 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
795 795  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
796 796  30000
797 797  OK
... ... @@ -825,7 +825,7 @@
825 825  (% style="color:blue" %)**AT Command: AT+5VT**
826 826  
827 827  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
828 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 204px; background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color: #4F81BD;color:white; width: 149px;" %)**Response**
832 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 204px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 149px;" %)**Response**
829 829  |(% style="width:156px" %)AT+5VT=?|(% style="width:204px" %)Show 5V open time.|(% style="width:149px" %)0 (default)
830 830  OK
831 831  |(% style="width:156px" %)AT+5VT=500|(% style="width:204px" %)Close after a delay of 500 milliseconds.|(% style="width:149px" %)(((
... ... @@ -849,7 +849,7 @@
849 849  (% style="color:blue" %)**AT Command: **
850 850  
851 851  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
852 -|(% style="background-color:#4f81bd; color:white; width:153px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:276px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
856 +|(% style="background-color:#d9e2f3; color:#0070c0; width:153px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:276px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:86px" %)**Response**
853 853  |(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
854 854  |(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
855 855  
... ... @@ -863,7 +863,7 @@
863 863  === 3.3.4  Alarm Base on Timeout ===
864 864  
865 865  
866 -DS03A-LB/LS can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
870 +DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
867 867  
868 868  * (((
869 869  (% style="color:blue" %)**Keep Status: Status to be monitor**
... ... @@ -905,9 +905,9 @@
905 905  (% style="color:blue" %)**AT Command to configure:**
906 906  
907 907  * (((
908 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
912 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
909 909  
910 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
914 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
911 911  )))
912 912  
913 913  * (((
... ... @@ -927,9 +927,9 @@
927 927  (% style="color:blue" %)**AT Command to configure:**
928 928  
929 929  * (((
930 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
934 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
931 931  
932 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
936 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
933 933  )))
934 934  
935 935  * (((
... ... @@ -952,7 +952,7 @@
952 952  (% style="color:blue" %)**AT Command:**
953 953  
954 954  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
955 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**
959 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
956 956  |(% style="width:155px" %)(((
957 957  AT+TTRALARM=0
958 958  )))|(% style="width:279px" %)(((
... ... @@ -981,7 +981,7 @@
981 981  (% style="color:blue" %)**AT Command:**
982 982  
983 983  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
984 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
988 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
985 985  |(% style="width:155px" %)(((
986 986  AT+COUNTMOD=0
987 987  )))|(% style="width:277px" %)(((
... ... @@ -1010,7 +1010,7 @@
1010 1010  (% style="color:blue" %)**AT Command:**
1011 1011  
1012 1012  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1013 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1017 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1014 1014  |(% style="width:155px" %)(((
1015 1015  AT+TTRCHANNEL=1
1016 1016  )))|(% style="width:259px" %)(((
... ... @@ -1041,7 +1041,7 @@
1041 1041  (% style="color:blue" %)**AT Command:**
1042 1042  
1043 1043  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1044 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1048 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1045 1045  |(% style="width:155px" %)(((
1046 1046  AT+SYNCMOD=1
1047 1047  )))|(% style="width:259px" %)(((
... ... @@ -1075,7 +1075,7 @@
1075 1075  (% style="color:blue" %)**AT Command:**
1076 1076  
1077 1077  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1078 -|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1082 +|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1079 1079  |(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1080 1080  OK
1081 1081  )))
... ... @@ -1091,7 +1091,7 @@
1091 1091  (% style="color:blue" %)**AT Command:**
1092 1092  
1093 1093  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1094 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1098 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1095 1095  |(% style="width:155px" %)(((
1096 1096  AT+SETCNT=1,100
1097 1097  )))|(% style="width:259px" %)(((
... ... @@ -1128,7 +1128,7 @@
1128 1128  = 5. OTA firmware update =
1129 1129  
1130 1130  
1131 -User can change firmware DS03A-LB/LS to:
1135 +User can change firmware DS03A-LB to:
1132 1132  
1133 1133  * Change Frequency band/ region.
1134 1134  * Update with new features.
image-20240115094003-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0