<
From version < 40.5 >
edited by Xiaoling
on 2024/01/08 16:21
To version < 40.10 >
edited by Xiaoling
on 2024/01/08 16:26
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -22,41 +22,41 @@
22 22  
23 23  = 1. Introduction =
24 24  
25 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
25 +== 1.1 What is LoRaWAN Door Sensor ==
26 26  
27 27  
28 28  (((
29 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
29 +The Dragino DS03A-LB/LS is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
30 30  )))
31 31  
32 32  (((
33 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33 +The LoRa wireless technology used in DS03A-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
34 34  )))
35 35  
36 36  (((
37 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
37 +The DS03A-LB/LS will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB/LS can count each open event and uplink periodically.
38 38  )))
39 39  
40 40  (((
41 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
41 +DS03A-LB/LS supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
42 42  )))
43 43  
44 44  (((
45 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
45 +DS03A-LB/LS has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
46 46  
47 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
47 +DS03A-LB/LS is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
48 48  )))
49 49  
50 50  (((
51 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
51 +DS03A-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
52 52  )))
53 53  
54 54  (((
55 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or **solar powered + li-on battery**, it is designed for long term use up to 5 years.
55 +DS03A-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or (% style="color:blue" %)**solar powered + li-on battery**(%%), it is designed for long term use up to 5 years.
56 56  )))
57 57  
58 58  (((
59 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
59 +Each DS03A-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
60 60  )))
61 61  
62 62  
... ... @@ -129,7 +129,7 @@
129 129  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
130 130  
131 131  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
132 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
132 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 226px;background-color:#D9E2F3;color:#0070C0" %)**Action**
133 133  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
134 134  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
135 135  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -144,7 +144,7 @@
144 144  == 1.7 BLE connection ==
145 145  
146 146  
147 -DS03A-LB support BLE remote configure.
147 +DS03A-LB/LS support BLE remote configure.
148 148  
149 149  
150 150  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -188,12 +188,12 @@
188 188  * Wood Door: 10mm ~~ 30mm
189 189  * Iron Door: 30 ~~ 45mm
190 190  
191 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
191 += 2. Configure DS03A-LB/LS to connect to LoRaWAN network =
192 192  
193 193  == 2.1 How it works ==
194 194  
195 195  
196 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
196 +The DS03A-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
197 197  
198 198  
199 199  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -206,9 +206,9 @@
206 206  [[image:image-20230522092858-1.png||height="391" width="874"]]
207 207  
208 208  
209 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
209 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB/LS.
210 210  
211 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
211 +Each DS03A-LB/LS is shipped with a sticker with the default device EUI as below:
212 212  
213 213  [[image:image-20230426085205-1.png||height="238" width="512"]]
214 214  
... ... @@ -238,10 +238,10 @@
238 238  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
239 239  
240 240  
241 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
241 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB/LS
242 242  
243 243  
244 -Press the button for 5 seconds to activate the DS03A-LB.
244 +Press the button for 5 seconds to activate the DS03A-LB/LS.
245 245  
246 246  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
247 247  
... ... @@ -253,9 +253,9 @@
253 253  === 2.3.1 Device Status, FPORT~=5 ===
254 254  
255 255  
256 -Include device configure status. Once DS03A-LB Joined the network, it will uplink this message to the server. After that, DS03A-LB will uplink Device Status every 12 hours.
256 +Include device configure status. Once DS03A-LB/LS Joined the network, it will uplink this message to the server. After that, DS03A-LB/LS will uplink Device Status every 12 hours.
257 257  
258 -Users can also use the downlink command**(0x26 01)** to ask DS03A-LB to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
258 +Users can also use the downlink command**(0x26 01)** to ask DS03A-LB/LS to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
259 259  
260 260  
261 261  The Payload format is as below.
... ... @@ -270,7 +270,7 @@
270 270  [[image:image-20230630155406-1.png||height="190" width="873"]]
271 271  
272 272  
273 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB/LS, this value is 0x1B
274 274  
275 275  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
276 276  
... ... @@ -326,7 +326,7 @@
326 326  === 2.3.2  Sensor Configuration, FPORT~=4 ===
327 327  
328 328  
329 -DS03A-LB will only send this command after getting the downlink command **(0x26 02)** from the server.
329 +DS03A-LB/LS will only send this command after getting the downlink command **(0x26 02)** from the server.
330 330  
331 331  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
332 332  |(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
... ... @@ -357,9 +357,9 @@
357 357  (% style="color:blue" %)**Disalarm: (default: 0)**
358 358  )))
359 359  
360 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
360 + **If Disalarm = 1**, DS03A-LB/LS will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
361 361  
362 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
362 + **If Disalarm = 0**, DS03A-LB/LS will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
363 363  
364 364  
365 365  (% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
... ... @@ -383,7 +383,7 @@
383 383  === 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
384 384  
385 385  
386 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
386 +DS03A-LB/LS will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB/LS will send uplinks when:
387 387  
388 388  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
389 389  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
... ... @@ -559,7 +559,7 @@
559 559  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
560 560  
561 561  
562 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
562 +DS03A-LB/LS stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
563 563  
564 564  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
565 565  
... ... @@ -587,7 +587,7 @@
587 587  )))
588 588  
589 589  * (((
590 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
590 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB/LS will send max bytes according to the current DR and Frequency bands.
591 591  )))
592 592  
593 593  For example, in the US915 band, the max payload for different DR is:
... ... @@ -659,7 +659,7 @@
659 659  == 2.5 Datalog Feature ==
660 660  
661 661  
662 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
662 +(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB/LS will store the reading for future retrieving purposes.
663 663  
664 664  (% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
665 665  
... ... @@ -667,10 +667,10 @@
667 667  === 2.5.1 Ways to get datalog via LoRaWAN ===
668 668  
669 669  
670 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
670 +Set PNACKMD=1, DS03A-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network, DS03A-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
671 671  
672 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
673 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
672 +* a) DS03A-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
673 +* b) DS03A-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB/LS gets a ACK, DS03A-LB/LS will consider there is a network connection and resend all NONE-ACK Message.
674 674  
675 675  Below is the typical case for the Datalog Feature (Set PNACKMD=1)
676 676  
... ... @@ -680,7 +680,7 @@
680 680  === 2.5.2 Unix TimeStamp ===
681 681  
682 682  
683 -DS03A-LB uses Unix TimeStamp format based on
683 +DS03A-LB/LS uses Unix TimeStamp format based on
684 684  
685 685  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
686 686  
... ... @@ -1124,7 +1124,7 @@
1124 1124  = 4. Battery & Power Consumption =
1125 1125  
1126 1126  
1127 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1127 +DS03A-LB use ER26500 + SPC1520 battery pack and DS03A-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1128 1128  
1129 1129  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1130 1130  
... ... @@ -1152,7 +1152,7 @@
1152 1152  = 7. Order Info =
1153 1153  
1154 1154  
1155 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
1155 +**Part Number: (% style="color:blue" %)DS03A-LB-XX (%%)or (% style="color:blue" %)DS03A-LS-XX(%%)**
1156 1156  
1157 1157  (% style="color:red" %)**XX**(%%): The default frequency band
1158 1158  
... ... @@ -1177,7 +1177,7 @@
1177 1177  
1178 1178  (% style="color:#037691" %)**Package Includes**:
1179 1179  
1180 -* DS03A-LB LoRaWAN Temperature Sensor
1180 +* DS03A-LB or DS03A-LS LoRaWAN Temperature Sensor
1181 1181  
1182 1182  (% style="color:#037691" %)**Dimension and weight**:
1183 1183  
Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0