Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 40.12 >
edited by Xiaoling
on 2024/01/08 17:17
To version < 40.8 >
edited by Xiaoling
on 2024/01/08 16:24
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -22,41 +22,41 @@
22 22  
23 23  = 1. Introduction =
24 24  
25 -== 1.1 What is LoRaWAN Door Sensor ==
25 +== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
26 26  
27 27  
28 28  (((
29 -The Dragino DS03A-LB/LS is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
29 +The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
30 30  )))
31 31  
32 32  (((
33 -The LoRa wireless technology used in DS03A-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33 +The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
34 34  )))
35 35  
36 36  (((
37 -The DS03A-LB/LS will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB/LS can count each open event and uplink periodically.
37 +The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
38 38  )))
39 39  
40 40  (((
41 -DS03A-LB/LS supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
41 +DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
42 42  )))
43 43  
44 44  (((
45 -DS03A-LB/LS has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
45 +DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
46 46  
47 -DS03A-LB/LS is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
47 +DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
48 48  )))
49 49  
50 50  (((
51 -DS03A-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
51 +DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
52 52  )))
53 53  
54 54  (((
55 -DS03A-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or (% style="color:blue" %)**solar powered + li-on battery**(%%), it is designed for long term use up to 5 years.
55 +DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or (% style="color:blue" %)**solar powered + li-on battery**(%%), it is designed for long term use up to 5 years.
56 56  )))
57 57  
58 58  (((
59 -Each DS03A-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
59 +Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
60 60  )))
61 61  
62 62  
... ... @@ -129,7 +129,7 @@
129 129  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
130 130  
131 131  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
132 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
132 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
133 133  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
134 134  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
135 135  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -144,7 +144,7 @@
144 144  == 1.7 BLE connection ==
145 145  
146 146  
147 -DS03A-LB/LS support BLE remote configure.
147 +DS03A-LB support BLE remote configure.
148 148  
149 149  
150 150  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -188,12 +188,12 @@
188 188  * Wood Door: 10mm ~~ 30mm
189 189  * Iron Door: 30 ~~ 45mm
190 190  
191 -= 2. Configure DS03A-LB/LS to connect to LoRaWAN network =
191 += 2. Configure DS03A-LB to connect to LoRaWAN network =
192 192  
193 193  == 2.1 How it works ==
194 194  
195 195  
196 -The DS03A-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
196 +The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
197 197  
198 198  
199 199  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -206,9 +206,9 @@
206 206  [[image:image-20230522092858-1.png||height="391" width="874"]]
207 207  
208 208  
209 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB/LS.
209 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
210 210  
211 -Each DS03A-LB/LS is shipped with a sticker with the default device EUI as below:
211 +Each DS03A-LB is shipped with a sticker with the default device EUI as below:
212 212  
213 213  [[image:image-20230426085205-1.png||height="238" width="512"]]
214 214  
... ... @@ -238,10 +238,10 @@
238 238  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
239 239  
240 240  
241 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB/LS
241 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
242 242  
243 243  
244 -Press the button for 5 seconds to activate the DS03A-LB/LS.
244 +Press the button for 5 seconds to activate the DS03A-LB.
245 245  
246 246  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
247 247  
... ... @@ -253,9 +253,9 @@
253 253  === 2.3.1 Device Status, FPORT~=5 ===
254 254  
255 255  
256 -Include device configure status. Once DS03A-LB/LS Joined the network, it will uplink this message to the server. After that, DS03A-LB/LS will uplink Device Status every 12 hours.
256 +Include device configure status. Once DS03A-LB Joined the network, it will uplink this message to the server. After that, DS03A-LB will uplink Device Status every 12 hours.
257 257  
258 -Users can also use the downlink command**(0x26 01)** to ask DS03A-LB/LS to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
258 +Users can also use the downlink command**(0x26 01)** to ask DS03A-LB to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
259 259  
260 260  
261 261  The Payload format is as below.
... ... @@ -270,7 +270,7 @@
270 270  [[image:image-20230630155406-1.png||height="190" width="873"]]
271 271  
272 272  
273 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB/LS, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
274 274  
275 275  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
276 276  
... ... @@ -326,7 +326,7 @@
326 326  === 2.3.2  Sensor Configuration, FPORT~=4 ===
327 327  
328 328  
329 -DS03A-LB/LS will only send this command after getting the downlink command **(0x26 02)** from the server.
329 +DS03A-LB will only send this command after getting the downlink command **(0x26 02)** from the server.
330 330  
331 331  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
332 332  |(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
... ... @@ -357,9 +357,9 @@
357 357  (% style="color:blue" %)**Disalarm: (default: 0)**
358 358  )))
359 359  
360 - **If Disalarm = 1**, DS03A-LB/LS will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
360 + **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
361 361  
362 - **If Disalarm = 0**, DS03A-LB/LS will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
362 + **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
363 363  
364 364  
365 365  (% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
... ... @@ -383,7 +383,7 @@
383 383  === 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
384 384  
385 385  
386 -DS03A-LB/LS will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB/LS will send uplinks when:
386 +DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
387 387  
388 388  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
389 389  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
... ... @@ -391,7 +391,7 @@
391 391  **1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
392 392  
393 393  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
394 -|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
394 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
395 395  |(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
396 396  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
397 397  Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
... ... @@ -471,7 +471,7 @@
471 471  (% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
472 472  
473 473  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
474 -|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
474 +|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
475 475  |(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
476 476  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
477 477  Status1 & Alarm1
... ... @@ -559,12 +559,12 @@
559 559  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
560 560  
561 561  
562 -DS03A-LB/LS stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
562 +DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
563 563  
564 564  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
565 565  
566 566  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
567 -|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
567 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
568 568  |(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
569 569  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
570 570  Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
... ... @@ -587,7 +587,7 @@
587 587  )))
588 588  
589 589  * (((
590 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB/LS will send max bytes according to the current DR and Frequency bands.
590 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
591 591  )))
592 592  
593 593  For example, in the US915 band, the max payload for different DR is:
... ... @@ -659,7 +659,7 @@
659 659  == 2.5 Datalog Feature ==
660 660  
661 661  
662 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB/LS will store the reading for future retrieving purposes.
662 +(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
663 663  
664 664  (% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
665 665  
... ... @@ -667,17 +667,20 @@
667 667  === 2.5.1 Ways to get datalog via LoRaWAN ===
668 668  
669 669  
670 -Set PNACKMD=1, DS03A-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network, DS03A-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
670 +Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
671 671  
672 -* a) DS03A-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
673 -* b) DS03A-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB/LS gets a ACK, DS03A-LB/LS will consider there is a network connection and resend all NONE-ACK Message.
672 +* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
673 +* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
674 674  
675 +Below is the typical case for the Datalog Feature (Set PNACKMD=1)
675 675  
677 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
676 676  
679 +
677 677  === 2.5.2 Unix TimeStamp ===
678 678  
679 679  
680 -DS03A-LB/LS uses Unix TimeStamp format based on
683 +DS03A-LB uses Unix TimeStamp format based on
681 681  
682 682  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
683 683  
... ... @@ -695,7 +695,7 @@
695 695  
696 696  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
697 697  
698 -Once DS03A-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB/LS. If DS03A-LB/LS fails to get the time from the server, DS03A-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
701 +Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
699 699  
700 700  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
701 701  
... ... @@ -708,7 +708,7 @@
708 708  
709 709  (% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
710 710  
711 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB/LS in Datacake.**
714 +(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
712 712  
713 713  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
714 714  
... ... @@ -743,7 +743,7 @@
743 743  == 2.7 Frequency Plans ==
744 744  
745 745  
746 -The DS03A-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
749 +The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
747 747  
748 748  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
749 749  
... ... @@ -754,12 +754,12 @@
754 754  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
755 755  
756 756  
757 -= 3. Configure DS03A-LB/LS =
760 += 3. Configure DS03A-LB =
758 758  
759 759  == 3.1 Configure Methods: ==
760 760  
761 761  
762 -DS03A-LB/LS supports below configure method:
765 +DS03A-LB supports below configure method:
763 763  
764 764  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
765 765  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -778,10 +778,10 @@
778 778  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
779 779  
780 780  
781 -== 3.3 Commands special design for DS03A-LB/LS ==
784 +== 3.3 Commands special design for DS03A-LB ==
782 782  
783 783  
784 -These commands only valid for DS03A-LB/LS, as below:
787 +These commands only valid for DS03A-LB, as below:
785 785  
786 786  
787 787  === 3.3.1  Set Transmit Interval Time ===
... ... @@ -864,7 +864,7 @@
864 864  === 3.3.4  Alarm Base on Timeout ===
865 865  
866 866  
867 -DS03A-LB/LS can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
870 +DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
868 868  
869 869  * (((
870 870  (% style="color:blue" %)**Keep Status: Status to be monitor**
... ... @@ -906,9 +906,9 @@
906 906  (% style="color:blue" %)**AT Command to configure:**
907 907  
908 908  * (((
909 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
912 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
910 910  
911 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
914 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
912 912  )))
913 913  
914 914  * (((
... ... @@ -928,9 +928,9 @@
928 928  (% style="color:blue" %)**AT Command to configure:**
929 929  
930 930  * (((
931 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
934 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
932 932  
933 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
936 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
934 934  )))
935 935  
936 936  * (((
... ... @@ -953,7 +953,7 @@
953 953  (% style="color:blue" %)**AT Command:**
954 954  
955 955  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
956 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**
959 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
957 957  |(% style="width:155px" %)(((
958 958  AT+TTRALARM=0
959 959  )))|(% style="width:279px" %)(((
... ... @@ -982,7 +982,7 @@
982 982  (% style="color:blue" %)**AT Command:**
983 983  
984 984  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
985 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
988 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
986 986  |(% style="width:155px" %)(((
987 987  AT+COUNTMOD=0
988 988  )))|(% style="width:277px" %)(((
... ... @@ -1011,7 +1011,7 @@
1011 1011  (% style="color:blue" %)**AT Command:**
1012 1012  
1013 1013  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1014 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1017 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1015 1015  |(% style="width:155px" %)(((
1016 1016  AT+TTRCHANNEL=1
1017 1017  )))|(% style="width:259px" %)(((
... ... @@ -1042,7 +1042,7 @@
1042 1042  (% style="color:blue" %)**AT Command:**
1043 1043  
1044 1044  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1045 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1048 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1046 1046  |(% style="width:155px" %)(((
1047 1047  AT+SYNCMOD=1
1048 1048  )))|(% style="width:259px" %)(((
... ... @@ -1076,7 +1076,7 @@
1076 1076  (% style="color:blue" %)**AT Command:**
1077 1077  
1078 1078  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1079 -|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1082 +|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1080 1080  |(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1081 1081  OK
1082 1082  )))
... ... @@ -1092,7 +1092,7 @@
1092 1092  (% style="color:blue" %)**AT Command:**
1093 1093  
1094 1094  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1095 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1098 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1096 1096  |(% style="width:155px" %)(((
1097 1097  AT+SETCNT=1,100
1098 1098  )))|(% style="width:259px" %)(((
... ... @@ -1129,7 +1129,7 @@
1129 1129  = 5. OTA firmware update =
1130 1130  
1131 1131  
1132 -User can change firmware DS03A-LB/LS to:
1135 +User can change firmware DS03A-LB to:
1133 1133  
1134 1134  * Change Frequency band/ region.
1135 1135  * Update with new features.

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0