Last modified by Xiaoling on 2025/03/31 16:45
<
From version < 4.6 >
edited by Xiaoling
on 2023/05/16 09:24
To version < 25.1 >
edited by Saxer Lin
on 2023/06/30 17:23
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Saxer
Content
... ... @@ -51,8 +51,12 @@
51 51  )))
52 52  
53 53  
54 +[[image:image-20230522092934-2.png||height="346" width="774"]]
55 +
56 +
54 54  == 1.2 ​Features ==
55 55  
59 +
56 56  * LoRaWAN 1.0.3 Class A
57 57  * Ultra-low power consumption
58 58  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
... ... @@ -69,6 +69,7 @@
69 69  
70 70  == 1.3 Specification ==
71 71  
76 +
72 72  (% style="color:#037691" %)**Common DC Characteristics:**
73 73  
74 74  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -101,6 +101,7 @@
101 101  
102 102  == 1.4 Applications ==
103 103  
109 +
104 104  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]
105 105  
106 106  
... ... @@ -134,7 +134,7 @@
134 134  == 1.7 BLE connection ==
135 135  
136 136  
137 -D2x-LB support BLE remote configure.
143 +DS03A-LB support BLE remote configure.
138 138  
139 139  
140 140  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -146,9 +146,13 @@
146 146  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
147 147  
148 148  
149 -== 1.8 Mechanical ==
155 +== 1.8 Pin Definitions ==
150 150  
157 +[[image:image-20230630160843-7.png]]
151 151  
159 +== 1.9 Mechanical ==
160 +
161 +
152 152  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
153 153  
154 154  
... ... @@ -166,7 +166,7 @@
166 166  == 2.1 How it works ==
167 167  
168 168  
169 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
179 +The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
170 170  
171 171  
172 172  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -174,9 +174,11 @@
174 174  
175 175  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
176 176  
177 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
187 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
178 178  
189 +[[image:image-20230522092858-1.png||height="391" width="874"]]
179 179  
191 +
180 180  (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
181 181  
182 182  Each DS03A-LB is shipped with a sticker with the default device EUI as below:
... ... @@ -223,6 +223,7 @@
223 223  
224 224  === 2.3.1 Device Status, FPORT~=5 ===
225 225  
238 +
226 226  Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
227 227  
228 228  The Payload format is as below.
... ... @@ -235,42 +235,42 @@
235 235  
236 236  Example parse in TTNv3
237 237  
238 -[[image:image-20230415153147-2.png||height="220" width="1120"]]
251 +[[image:image-20230630155406-1.png||height="190" width="873"]]
239 239  
240 240  
241 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x0B
254 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
242 242  
243 243  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
244 244  
245 245  (% style="color:#037691" %)**Frequency Band**:
246 246  
247 -*0x01: EU868
260 +0x01: EU868
248 248  
249 -*0x02: US915
262 +0x02: US915
250 250  
251 -*0x03: IN865
264 +0x03: IN865
252 252  
253 -*0x04: AU915
266 +0x04: AU915
254 254  
255 -*0x05: KZ865
268 +0x05: KZ865
256 256  
257 -*0x06: RU864
270 +0x06: RU864
258 258  
259 -*0x07: AS923
272 +0x07: AS923
260 260  
261 -*0x08: AS923-1
274 +0x08: AS923-1
262 262  
263 -*0x09: AS923-2
276 +0x09: AS923-2
264 264  
265 -*0x0a: AS923-3
278 +0x0a: AS923-3
266 266  
267 -*0x0b: CN470
280 +0x0b: CN470
268 268  
269 -*0x0c: EU433
282 +0x0c: EU433
270 270  
271 -*0x0d: KR920
284 +0x0d: KR920
272 272  
273 -*0x0e: MA869
286 +0x0e: MA869
274 274  
275 275  
276 276  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -291,137 +291,250 @@
291 291  Ex2: 0x0B49 = 2889mV
292 292  
293 293  
294 -=== 2.3.2  Real-Time Open/Close Status, Uplink FPORT~=2 ===
307 +=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
295 295  
296 296  
297 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
310 +DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
298 298  
299 -* Every 2 hours, this interval [[can be changed>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.1A0SetTransmitIntervalTime]].
300 -* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
312 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:723px" %)
313 +|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:721px" %)**Sensor Configuration FPORT=4**
314 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:99px" %)**2**|(% style="width:87px" %)**1**|(% style="width:97px" %)**2**|(% style="width:98px" %)**1**
315 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
316 +Keep status1
301 301  
302 -Uplink Payload totals 11 bytes.
318 +
319 +)))|(% style="width:99px" %)(((
320 +Keep time1
303 303  
304 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
305 -|=(% colspan="5" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 522px;" %)**Real-Time Open/Close Status, FPORT=2**
306 -|(% style="width:95px" %)**Size(bytes)**|(% style="width:78px" %)**1**|(% style="width:98px" %)**3**|(% style="width:144px" %)**3**|(% style="width:108px" %)**4**
307 -|(% style="width:95px" %)**Value**|(% style="width:78px" %)Status & [[Alarm>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]|(% style="width:98px" %)Total open door events|(% style="width:144px" %)(((
308 -The last door open duration (unit: min)
309 -)))|(% style="width:108px" %)[[Unix TimeStamp>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.4.1A0UnixTimeStamp]]
322 +(unit: sec)
323 +)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
324 +Keep time2
310 310  
311 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:518.818px" %)
312 -|=(% colspan="4" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 516px;" %)**Status & Alarm field**
313 -|(% style="width:76px" %)**Size(bit)**|(% style="width:70px" %)**6**|(% style="width:240px" %)**1**|(% style="width:130px" %)**1**
314 -|(% style="width:76px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:240px" %)[[Enable/disable Timeout Alarm>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
315 -0: No Alarm; 1: Alarm|(% style="width:130px" %)Status
316 -0: Close, 1: Open
326 +(unit: sec)
327 +)))|(% style="width:98px" %)(((
328 +Alarm interval
317 317  
318 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110547-6.png?width=1191&height=337&rev=1.1||alt="image-20220609110547-6.png" height="337" width="1191"]]
330 +(unit: min)
331 +)))
319 319  
333 +* (((
334 +(% style="color:blue" %)**TDC: (default: 0x001C20)**
335 +)))
320 320  
321 -=== 2.3.3  Historical Door Open/Close Event, FPORT~=3 ===
337 +Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
322 322  
323 323  
324 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.4A0DatalogFeature]].
340 +* (((
341 +(% style="color:blue" %)**Disalarm: (default: 0)**
342 +)))
325 325  
326 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
344 + **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
327 327  
346 + **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
347 +
348 +
349 +(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
350 +
351 +
328 328  * (((
329 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
353 +(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
330 330  )))
331 331  
332 -For example, in the US915 band, the max payload for different DR is:
356 +Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
333 333  
334 -1. (((
335 -**DR0**: max is 11 bytes so one entry of data
358 +[[image:image-20230630155527-3.png||height="146" width="902"]]
359 +
360 +
361 +* (((
362 +(% style="color:blue" %)**Alarm interval(default: 0)**
336 336  )))
337 -1. (((
338 -**DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
364 +
365 +When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
366 +
367 +
368 +=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
369 +
370 +
371 +DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
372 +
373 +* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
374 +* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
375 +
376 +
377 +1)When **AT+TTRCHANNEL=1**, Uplink Payload totals 11 bytes. (**Default mode**)
378 +
379 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
380 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
381 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
382 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
383 +Status
384 +
385 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
386 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
387 +The last door open duration (unit: sec)
388 +)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
389 +
390 +**Status & Alarm:**
391 +
392 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:645px" %)
393 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:125px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit0**
394 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
395 +Count mod
396 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:125px" %)(((
397 +0: No Alarm;
398 +
399 +1: Alarm
400 +)))|(% style="width:129px" %)(((
401 +Status 0: Close;
402 +
403 +1: Open
339 339  )))
340 -1. (((
341 -**DR2**: total payload includes 11 entries of data
342 -)))
343 -1. (((
344 -**DR3**: total payload includes 22 entries of data.
345 -)))
346 346  
347 -If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
406 +[[image:image-20230630155451-2.png||height="246" width="928"]]
348 348  
349 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609112215-7.png?width=1250&height=277&rev=1.1||alt="image-20220609112215-7.png" height="277" width="1250"]]
350 350  
351 -**Downlink:**
409 +2)When **AT+TTRCHANNEL=2**, Uplink Payload totals 18 bytes.
352 352  
353 -0x31 61 8E 57 40 61 8E 81 70 05
411 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
412 +|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**
413 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
414 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
415 +Status1
354 354  
417 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
418 +)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
419 +The last door open duration1 (unit: sec)
420 +)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
421 +Status2
355 355  
356 -**Uplink:**
423 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
424 +)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
357 357  
358 -00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50
426 +**Status1 & Alarm1:**
359 359  
428 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:730px" %)
429 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:167px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:171px" %)**bit0**
430 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
431 +Count mod
432 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:167px" %)(((
433 +0: No Alarm; 1: Alarm
360 360  
361 -**Parsed Value:**
435 +(PA8)
436 +)))|(% style="width:171px" %)(((
437 +Status 0: Close; 1:Open
362 362  
363 -[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]
439 +(PA8)
440 +)))
364 364  
442 +**Status2 & Alarm2:**
365 365  
366 -[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],
444 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:550px" %)
445 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:176px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:175px" %)**bit0**
446 +|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:176px" %)(((
447 +0: No Alarm; 1: Alarm
367 367  
368 -[FALSE, OPEN,  1, 0, 2021-11-12 12:36:34],
449 +(PA4)
450 +)))|(% style="width:175px" %)(((
451 +Status 0: Close,;1:Open
369 369  
370 -[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],
453 +(PA4)
454 +)))
371 371  
372 -[FALSE, OPEN,  2, 2, 2021-11-12 12:39:17],
456 +[[image:image-20230630155908-6.png||height="295" width="927"]]
373 373  
374 -[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],
375 375  
376 -[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],
459 +=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
377 377  
378 -[FALSE, OPEN,  3, 1, 2021-11-12 14:50:32],
379 379  
380 -[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],
462 +DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
381 381  
382 -[FALSE, OPEN,  4, 2, 2021-11-12 14:58:35],
464 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
383 383  
384 -[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],
466 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
467 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
468 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
469 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
470 +Status
385 385  
472 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
473 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
474 +The last door open duration (unit: sec)
475 +)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
386 386  
387 -=== 2.3.4  Sensor Configuration, FPORT~=4 ===
477 +**Status & Alarm:**
388 388  
479 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
480 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
481 +|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
482 +Count mod
483 +)))|(% style="width:95px" %)TDC flag 0:No;1:Yes|(% style="width:116px" %)(((
484 +0: No Alarm;
389 389  
390 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
486 +1: Alarm
487 +)))|(% style="width:112px" %)(((
488 +Status 0:Close;
391 391  
392 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
393 -|(% colspan="5" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
394 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**
395 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: min)
490 +1: Open
491 +)))
396 396  
397 397  * (((
398 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
494 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
399 399  )))
400 400  
401 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
497 +For example, in the US915 band, the max payload for different DR is:
402 402  
499 +(((
500 +**~1. DR0**: max is 11 bytes so one entry of data
501 +)))
403 403  
404 -* (((
405 -(% style="color:blue" %)**Disalarm: (default: 0)**
503 +(((
504 +**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
406 406  )))
407 407  
408 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
507 +(((
508 +**3. DR2**: total payload includes 11 entries of data
509 +)))
409 409  
410 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
511 +(((
512 +**4. DR3**: total payload includes 22 entries of data.
513 +)))
411 411  
515 +If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
412 412  
413 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
517 +[[image:image-20230630155556-4.png||height="146" width="938"]]
414 414  
519 +**Downlink:**
415 415  
416 -* (((
417 -(% style="color:blue" %)**Keep Status & Keep Time**
418 -)))
521 +0x31 64 9E 7D 34 64 9E 7E 9C 05
419 419  
420 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
421 421  
422 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110018-4.png?width=1159&height=291&rev=1.1||alt="image-20220609110018-4.png" height="291" width="1159"]]
524 +**Uplink:**
423 423  
526 +45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
424 424  
528 +
529 +**Parsed Value:**
530 +
531 +[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, DOOR_OPEN_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
532 +
533 +
534 +[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
535 +
536 +[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
537 +
538 +[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
539 +
540 +[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
541 +
542 +[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
543 +
544 +[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
545 +
546 +[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
547 +
548 +[[image:image-20230630155751-5.png||height="188" width="809"]]
549 +
550 +
425 425  == 2.4 Payload Decoder file ==
426 426  
427 427  
... ... @@ -439,11 +439,13 @@
439 439  
440 440  (% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
441 441  
568 +(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
442 442  
570 +
443 443  === 2.5.1 Ways to get datalog via LoRaWAN ===
444 444  
445 445  
446 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
574 +Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
447 447  
448 448  * a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
449 449  * b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
... ... @@ -452,6 +452,7 @@
452 452  
453 453  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
454 454  
583 +
455 455  === 2.5.2 Unix TimeStamp ===
456 456  
457 457  
... ... @@ -480,6 +480,7 @@
480 480  
481 481  == 2.6 ​Show Data in DataCake IoT Server ==
482 482  
612 +
483 483  Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
484 484  
485 485  
... ... @@ -489,22 +489,31 @@
489 489  
490 490  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
491 491  
622 +
492 492  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]
493 493  
625 +
494 494  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]
495 495  
628 +
496 496  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]
497 497  
631 +
498 498  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]
499 499  
634 +
500 500  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]
501 501  
637 +
502 502  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]
503 503  
640 +
504 504  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]
505 505  
643 +
506 506  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]
507 507  
646 +
508 508  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]
509 509  
510 510  
... ... @@ -519,11 +519,9 @@
519 519  == 2.8 ​Firmware Change Log ==
520 520  
521 521  
522 -**Firmware download link:**
661 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
523 523  
524 -[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
525 525  
526 -
527 527  = 3. Configure DS03A-LB =
528 528  
529 529  == 3.1 Configure Methods: ==
... ... @@ -537,6 +537,7 @@
537 537  
538 538  == 3.2 General Commands ==
539 539  
677 +
540 540  These commands are to configure:
541 541  
542 542  * General system settings like: uplink interval.
... ... @@ -561,7 +561,7 @@
561 561  (% style="color:blue" %)**AT Command: AT+TDC**
562 562  
563 563  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
564 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
702 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
565 565  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
566 566  30000
567 567  OK
... ... @@ -593,13 +593,17 @@
593 593  
594 594  === 3.3.3  Enable / Disable Alarm ===
595 595  
734 +
596 596  Feature: Enable/Disable Alarm for open/close event. Default value 0.
597 597  
598 -**AT Command:**
737 +(% style="color:blue" %)**AT Command: **
599 599  
600 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609140712-1.png?rev=1.1||alt="image-20220609140712-1.png"]]
739 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
740 +|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
741 +|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
742 +|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
601 601  
602 -**Downlink Command:**
744 +(% style="color:blue" %)**Downlink Command: **
603 603  
604 604  0xA7 01  ~/~/ Same As AT+DISALARM=1
605 605  
... ... @@ -608,42 +608,43 @@
608 608  
609 609  === 3.3.4  Alarm Base on Timeout ===
610 610  
753 +
611 611  DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
612 612  
613 613  
614 614  * (((
615 -**Keep Status: Status to be monitor**
758 +(% style="color:blue" %)**Keep Status: Status to be monitor**
616 616  )))
617 617  
618 -Keep Status = 1: Monitor Close to Open event
761 +(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
619 619  
620 -Keep Status = 0: Monitor Open to Close event
763 +(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
621 621  
622 622  
623 623  * (((
624 -**Keep Time: Timeout to send an Alarm**
767 +(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
625 625  )))
626 626  
627 627  Range 0 ~~ 65535(0xFFFF) seconds.
628 628  
629 -If keep time = 0, Disable Alarm Base on Timeout feature.
772 +If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
630 630  
631 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
774 +If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
632 632  
633 633  
634 -**AT Command to configure:**
777 +(% style="color:blue" %)**AT Command to configure:**
635 635  
636 636  * (((
637 -**AT+TTRIG=1,30**  **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
780 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
638 638  )))
639 639  
640 640  * (((
641 -**AT+TTRIG=0,0**   **~-~-> ** Default Value, disable timeout Alarm.
784 +(% style="color:#037691" %)**AT+TTRIG=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
642 642  )))
643 643  
644 -**Downlink Command to configure:**
787 +(% style="color:blue" %)**Downlink Command to configure:**
645 645  
646 -**Command: 0xA9 aa bb cc**
789 +(% style="color:#037691" %)**Command: 0xA9 aa bb cc**
647 647  
648 648  **A9:** Command Type Code
649 649  
... ... @@ -661,27 +661,27 @@
661 661  
662 662  === 3.3.5  Count Mod ===
663 663  
664 -**AT Command:**
665 665  
666 -|=**Command Example**|=**Function**|=**Response**
667 -|(((
808 +(% style="color:blue" %)**AT Command:**
809 +
810 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
811 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
812 +|(% style="width:155px" %)(((
668 668  AT+COUNTMOD=0
669 -)))|(((
814 +)))|(% style="width:277px" %)(((
670 670  the count value keeps accumulating mode
671 -)))|(((
672 -
673 -
816 +)))|(% style="width:86px" %)(((
674 674  OK
675 675  )))
676 -|(((
819 +|(% style="width:155px" %)(((
677 677  AT+COUNTMOD=1
678 -)))|(((
821 +)))|(% style="width:277px" %)(((
679 679  the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
680 -)))|(((
823 +)))|(% style="width:86px" %)(((
681 681  OK
682 682  )))
683 683  
684 -**Downlink Command:**
827 +(% style="color:blue" %)**Downlink Command:**
685 685  
686 686  Example:  0B aa  => AT+COUNTMOD = second byte
687 687  
... ... @@ -688,27 +688,27 @@
688 688  
689 689  === 3.3.6  Interrupt Pin Channel Mod ===
690 690  
691 -**AT Command:**
692 692  
693 -|=**Command Example**|=**Function**|=**Response**
694 -|(((
695 -AT+TTRCHANNEL=1
696 -)))|(((
697 -set as single channel, only use PB14 pin as interrupt pin.
698 -)))|(((
699 -
835 +(% style="color:blue" %)**AT Command:**
700 700  
837 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
838 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
839 +|(% style="width:155px" %)(((
840 +AT+TTRCHANNEL=1
841 +)))|(% style="width:288px" %)(((
842 +set as single channel, only use PA8 pin as interrupt pin.
843 +)))|(% style="width:44px" %)(((
701 701  OK
702 702  )))
703 -|(((
846 +|(% style="width:155px" %)(((
704 704  AT+TTRCHANNEL=2
705 -)))|(((
706 -is set as dual channel, use PB14 pin and PB15 pin as interrupt pin.
707 -)))|(((
848 +)))|(% style="width:288px" %)(((
849 +is set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
850 +)))|(% style="width:44px" %)(((
708 708  OK
709 709  )))
710 710  
711 -**Downlink Command:**
854 +(% style="color:blue" %)**Downlink Command:**
712 712  
713 713  Example:  0D aa => AT+TTRCHANNEL = second byte
714 714  
... ... @@ -715,73 +715,49 @@
715 715  
716 716  === 3.3.7  Change the name of AT+TTRIG to AT+TTRIG1 ===
717 717  
718 -**Downlink Command:**
719 719  
862 +(% style="color:blue" %)**Downlink Command:**
863 +
720 720  Example:  A9 01 aa bb cc  => AT+TTRIG1= third byte, 4th byte and 5th byte
721 721  
722 722  
723 723  === 3.3.8  Added AT+TTRIG2 for PB15 pin ===
724 724  
725 -**Downlink Command:**
726 726  
870 +(% style="color:blue" %)**Downlink Command:**
871 +
727 727  Example: A9 02 aa bb cc  => AT+TTRIG2= third byte, 4th byte and 5th byte
728 728  
729 729  
730 730  === 3.3.9  TTRIG1/2 timeout status alarm ===
731 731  
877 +
732 732  It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
733 733  
734 -**AT Command:**
880 +(% style="color:blue" %)**AT Command:**
735 735  
736 -|=**Command Example**|=**Function**|=**Response**
737 -|(((
882 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
883 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
884 +|(% style="width:155px" %)(((
738 738  AT+TTRALARM=0
739 -)))|(((
886 +)))|(% style="width:279px" %)(((
740 740  disable continuous alarm
741 -)))|(((
742 -
743 -
888 +)))|(% style="width:84px" %)(((
744 744  OK
745 745  )))
746 -|(((
891 +|(% style="width:155px" %)(((
747 747  AT+TTRALARM=60
748 -)))|(((
749 - The alarm interval is 60 minutes (unit: minutes)
750 -)))|(((
893 +)))|(% style="width:279px" %)(((
894 +The alarm interval is 60 minutes (unit: minutes)
895 +)))|(% style="width:84px" %)(((
751 751  OK
752 752  )))
753 753  
754 -**Downlink Command:**
899 +(% style="color:blue" %)**Downlink Command:**
755 755  
756 756  Example:  0C aa  => AT+TTRALARM= aa
757 757  
758 758  
759 -=== 3.3.9  Select counting mode ===
760 -
761 -**AT+TTRMODx=a,b**
762 -
763 -When **a=0**, the door is opened to count, and when **a=1**,the closed door is counted.
764 -
765 -When **b=0**, it is the last door open duration, and when **b=1**,the last door close duration.
766 -
767 -**AT Command:**
768 -
769 -|=**Command Example**|=**Function**|=**Response**
770 -|(((
771 -AT+TTRMODx=1,0
772 -)))|Door closed count and record the last door opened duration|(((
773 -
774 -
775 -OK
776 -)))
777 -|(((
778 -AT+TTRMODx=0,1
779 -)))|(((
780 -Door opened count and record the last door Door Door open closed duration
781 -)))|(((
782 -OK
783 -)))
784 -
785 785  = 4. Battery & Power Consumption =
786 786  
787 787  
... ... @@ -802,10 +802,10 @@
802 802  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
803 803  
804 804  
805 -Methods to Update Firmware:
924 +**Methods to Update Firmware:**
806 806  
807 -* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
808 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
926 +* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
927 +* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
809 809  
810 810  = 6. FAQ =
811 811  
... ... @@ -856,4 +856,4 @@
856 856  
857 857  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
858 858  
859 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
978 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
image-20230522092858-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +156.5 KB
Content
image-20230522092934-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +156.5 KB
Content
image-20230522093256-3.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.5 KB
Content
image-20230630155406-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230630155451-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +77.2 KB
Content
image-20230630155527-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +39.2 KB
Content
image-20230630155556-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +38.4 KB
Content
image-20230630155751-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +511.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0