Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 38.7 >
edited by Xiaoling
on 2023/12/14 14:43
To version < 40.12 >
edited by Xiaoling
on 2024/01/08 17:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DS03A-LB Outdoor LoRaWAN Door Sensor User Manual
1 +DS03A-LB/LS -- Outdoor LoRaWAN Door Sensor User Manual
Content
... ... @@ -1,7 +1,16 @@
1 +(% style="display:none" %) (%%)
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
4 +[[image:image-20240108161155-2.png]]
3 3  
4 4  
7 +
8 +
9 +
10 +
11 +
12 +
13 +
5 5  **Table of Contents:**
6 6  
7 7  {{toc/}}
... ... @@ -13,41 +13,41 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
25 +== 1.1 What is LoRaWAN Door Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
29 +The Dragino DS03A-LB/LS is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33 +The LoRa wireless technology used in DS03A-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
37 +The DS03A-LB/LS will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB/LS can count each open event and uplink periodically.
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
41 +DS03A-LB/LS supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
45 +DS03A-LB/LS has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 37  
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
47 +DS03A-LB/LS is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
51 +DS03A-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
55 +DS03A-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or (% style="color:blue" %)**solar powered + li-on battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
59 +Each DS03A-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
... ... @@ -67,9 +67,10 @@
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 -* 8500mAh Battery for long term use
71 71  * Wall Mountable
72 72  * Outdoor Use
81 +* 8500mAh Li/SOCl2 Battery (DS03A-LB)
82 +* Solar panel + 3000mAh Li-on battery (DS03A-LS)
73 73  
74 74  == 1.3 Specification ==
75 75  
... ... @@ -76,7 +76,7 @@
76 76  
77 77  (% style="color:#037691" %)**Common DC Characteristics:**
78 78  
79 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
89 +* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
80 80  * Operating Temperature: -40 ~~ 85°C
81 81  
82 82  (% style="color:#037691" %)**LoRa Spec:**
... ... @@ -116,11 +116,10 @@
116 116  == 1.6 Button & LEDs ==
117 117  
118 118  
119 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
120 120  
121 -
122 122  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
123 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
132 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
124 124  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
125 125  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
126 126  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -135,7 +135,7 @@
135 135  == 1.7 BLE connection ==
136 136  
137 137  
138 -DS03A-LB support BLE remote configure.
147 +DS03A-LB/LS support BLE remote configure.
139 139  
140 140  
141 141  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -154,19 +154,25 @@
154 154  
155 155  == 1.9 Mechanical ==
156 156  
166 +=== 1.9.1 for LB version ===
157 157  
168 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS75-LB_LoRaWAN_Distance_Detection_Sensor_User_Manual/WebHome/image-20240105152536-3.png?rev=1.1||alt="image-20240105152536-3.png"]]
169 +
170 +
171 +**Probe Mechanical:**
172 +
158 158  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
159 159  
160 160  
161 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
162 162  
177 +=== 1.9.2 for LS version ===
163 163  
164 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
165 165  
180 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
166 166  
167 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
168 168  
169 169  
184 +
170 170  == 1.10 Magnet Distance ==
171 171  
172 172  
... ... @@ -173,13 +173,12 @@
173 173  * Wood Door: 10mm ~~ 30mm
174 174  * Iron Door: 30 ~~ 45mm
175 175  
191 += 2. Configure DS03A-LB/LS to connect to LoRaWAN network =
176 176  
177 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
178 -
179 179  == 2.1 How it works ==
180 180  
181 181  
182 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
196 +The DS03A-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
183 183  
184 184  
185 185  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -192,9 +192,9 @@
192 192  [[image:image-20230522092858-1.png||height="391" width="874"]]
193 193  
194 194  
195 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
209 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB/LS.
196 196  
197 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
211 +Each DS03A-LB/LS is shipped with a sticker with the default device EUI as below:
198 198  
199 199  [[image:image-20230426085205-1.png||height="238" width="512"]]
200 200  
... ... @@ -224,10 +224,10 @@
224 224  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
225 225  
226 226  
227 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
241 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB/LS
228 228  
229 229  
230 -Press the button for 5 seconds to activate the DS03A-LB.
244 +Press the button for 5 seconds to activate the DS03A-LB/LS.
231 231  
232 232  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
233 233  
... ... @@ -239,9 +239,9 @@
239 239  === 2.3.1 Device Status, FPORT~=5 ===
240 240  
241 241  
242 -Include device configure status. Once DS03A-LB Joined the network, it will uplink this message to the server. After that, DS03A-LB will uplink Device Status every 12 hours.
256 +Include device configure status. Once DS03A-LB/LS Joined the network, it will uplink this message to the server. After that, DS03A-LB/LS will uplink Device Status every 12 hours.
243 243  
244 -Users can also use the downlink command**(0x26 01)** to ask DS03A-LB to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
258 +Users can also use the downlink command**(0x26 01)** to ask DS03A-LB/LS to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
245 245  
246 246  
247 247  The Payload format is as below.
... ... @@ -256,7 +256,7 @@
256 256  [[image:image-20230630155406-1.png||height="190" width="873"]]
257 257  
258 258  
259 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB/LS, this value is 0x1B
260 260  
261 261  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
262 262  
... ... @@ -312,7 +312,7 @@
312 312  === 2.3.2  Sensor Configuration, FPORT~=4 ===
313 313  
314 314  
315 -DS03A-LB will only send this command after getting the downlink command **(0x26 02)** from the server.
329 +DS03A-LB/LS will only send this command after getting the downlink command **(0x26 02)** from the server.
316 316  
317 317  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
318 318  |(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
... ... @@ -343,9 +343,9 @@
343 343  (% style="color:blue" %)**Disalarm: (default: 0)**
344 344  )))
345 345  
346 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
360 + **If Disalarm = 1**, DS03A-LB/LS will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
347 347  
348 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
362 + **If Disalarm = 0**, DS03A-LB/LS will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
349 349  
350 350  
351 351  (% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
... ... @@ -369,7 +369,7 @@
369 369  === 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
370 370  
371 371  
372 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
386 +DS03A-LB/LS will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB/LS will send uplinks when:
373 373  
374 374  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
375 375  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
... ... @@ -377,7 +377,7 @@
377 377  **1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
378 378  
379 379  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
380 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
394 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
381 381  |(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
382 382  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
383 383  Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
... ... @@ -457,7 +457,7 @@
457 457  (% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
458 458  
459 459  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
460 -|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
474 +|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
461 461  |(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
462 462  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
463 463  Status1 & Alarm1
... ... @@ -545,12 +545,12 @@
545 545  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
546 546  
547 547  
548 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
562 +DS03A-LB/LS stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
549 549  
550 550  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
551 551  
552 552  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
553 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
567 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
554 554  |(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
555 555  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
556 556  Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
... ... @@ -562,7 +562,7 @@
562 562  
563 563  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
564 564  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
565 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
579 +|(% style="width:76px" %)Value|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
566 566  Count mod
567 567  )))|(% style="width:95px" %)(((
568 568  TDC flag 0:No; 1:Yes
... ... @@ -573,7 +573,7 @@
573 573  )))
574 574  
575 575  * (((
576 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
590 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB/LS will send max bytes according to the current DR and Frequency bands.
577 577  )))
578 578  
579 579  For example, in the US915 band, the max payload for different DR is:
... ... @@ -645,7 +645,7 @@
645 645  == 2.5 Datalog Feature ==
646 646  
647 647  
648 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
662 +(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB/LS will store the reading for future retrieving purposes.
649 649  
650 650  (% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
651 651  
... ... @@ -653,20 +653,17 @@
653 653  === 2.5.1 Ways to get datalog via LoRaWAN ===
654 654  
655 655  
656 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
670 +Set PNACKMD=1, DS03A-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network, DS03A-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
657 657  
658 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
659 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
672 +* a) DS03A-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
673 +* b) DS03A-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB/LS gets a ACK, DS03A-LB/LS will consider there is a network connection and resend all NONE-ACK Message.
660 660  
661 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
662 662  
663 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
664 664  
665 -
666 666  === 2.5.2 Unix TimeStamp ===
667 667  
668 668  
669 -DS03A-LB uses Unix TimeStamp format based on
680 +DS03A-LB/LS uses Unix TimeStamp format based on
670 670  
671 671  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
672 672  
... ... @@ -684,7 +684,7 @@
684 684  
685 685  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
686 686  
687 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
698 +Once DS03A-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB/LS. If DS03A-LB/LS fails to get the time from the server, DS03A-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
688 688  
689 689  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
690 690  
... ... @@ -697,7 +697,7 @@
697 697  
698 698  (% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
699 699  
700 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
711 +(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB/LS in Datacake.**
701 701  
702 702  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
703 703  
... ... @@ -732,7 +732,7 @@
732 732  == 2.7 Frequency Plans ==
733 733  
734 734  
735 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
746 +The DS03A-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
736 736  
737 737  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
738 738  
... ... @@ -743,12 +743,12 @@
743 743  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
744 744  
745 745  
746 -= 3. Configure DS03A-LB =
757 += 3. Configure DS03A-LB/LS =
747 747  
748 748  == 3.1 Configure Methods: ==
749 749  
750 750  
751 -DS03A-LB supports below configure method:
762 +DS03A-LB/LS supports below configure method:
752 752  
753 753  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
754 754  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -767,10 +767,10 @@
767 767  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
768 768  
769 769  
770 -== 3.3 Commands special design for DS03A-LB ==
781 +== 3.3 Commands special design for DS03A-LB/LS ==
771 771  
772 772  
773 -These commands only valid for DS03A-LB, as below:
784 +These commands only valid for DS03A-LB/LS, as below:
774 774  
775 775  
776 776  === 3.3.1  Set Transmit Interval Time ===
... ... @@ -853,7 +853,7 @@
853 853  === 3.3.4  Alarm Base on Timeout ===
854 854  
855 855  
856 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
867 +DS03A-LB/LS can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
857 857  
858 858  * (((
859 859  (% style="color:blue" %)**Keep Status: Status to be monitor**
... ... @@ -895,9 +895,9 @@
895 895  (% style="color:blue" %)**AT Command to configure:**
896 896  
897 897  * (((
898 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
909 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
899 899  
900 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
911 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
901 901  )))
902 902  
903 903  * (((
... ... @@ -917,9 +917,9 @@
917 917  (% style="color:blue" %)**AT Command to configure:**
918 918  
919 919  * (((
920 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
931 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
921 921  
922 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
933 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
923 923  )))
924 924  
925 925  * (((
... ... @@ -942,7 +942,7 @@
942 942  (% style="color:blue" %)**AT Command:**
943 943  
944 944  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
945 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
956 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**
946 946  |(% style="width:155px" %)(((
947 947  AT+TTRALARM=0
948 948  )))|(% style="width:279px" %)(((
... ... @@ -971,7 +971,7 @@
971 971  (% style="color:blue" %)**AT Command:**
972 972  
973 973  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
974 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
985 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
975 975  |(% style="width:155px" %)(((
976 976  AT+COUNTMOD=0
977 977  )))|(% style="width:277px" %)(((
... ... @@ -1000,7 +1000,7 @@
1000 1000  (% style="color:blue" %)**AT Command:**
1001 1001  
1002 1002  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1003 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1014 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1004 1004  |(% style="width:155px" %)(((
1005 1005  AT+TTRCHANNEL=1
1006 1006  )))|(% style="width:259px" %)(((
... ... @@ -1031,7 +1031,7 @@
1031 1031  (% style="color:blue" %)**AT Command:**
1032 1032  
1033 1033  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1034 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1045 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1035 1035  |(% style="width:155px" %)(((
1036 1036  AT+SYNCMOD=1
1037 1037  )))|(% style="width:259px" %)(((
... ... @@ -1065,7 +1065,7 @@
1065 1065  (% style="color:blue" %)**AT Command:**
1066 1066  
1067 1067  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1068 -|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1079 +|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1069 1069  |(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1070 1070  OK
1071 1071  )))
... ... @@ -1081,7 +1081,7 @@
1081 1081  (% style="color:blue" %)**AT Command:**
1082 1082  
1083 1083  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1084 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1095 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1085 1085  |(% style="width:155px" %)(((
1086 1086  AT+SETCNT=1,100
1087 1087  )))|(% style="width:259px" %)(((
... ... @@ -1110,7 +1110,7 @@
1110 1110  = 4. Battery & Power Consumption =
1111 1111  
1112 1112  
1113 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1124 +DS03A-LB use ER26500 + SPC1520 battery pack and DS03A-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1114 1114  
1115 1115  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1116 1116  
... ... @@ -1118,7 +1118,7 @@
1118 1118  = 5. OTA firmware update =
1119 1119  
1120 1120  
1121 -User can change firmware DS03A-LB to:
1132 +User can change firmware DS03A-LB/LS to:
1122 1122  
1123 1123  * Change Frequency band/ region.
1124 1124  * Update with new features.
... ... @@ -1138,7 +1138,7 @@
1138 1138  = 7. Order Info =
1139 1139  
1140 1140  
1141 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
1152 +**Part Number: (% style="color:blue" %)DS03A-LB-XX (%%)or (% style="color:blue" %)DS03A-LS-XX(%%)**
1142 1142  
1143 1143  (% style="color:red" %)**XX**(%%): The default frequency band
1144 1144  
... ... @@ -1163,7 +1163,7 @@
1163 1163  
1164 1164  (% style="color:#037691" %)**Package Includes**:
1165 1165  
1166 -* DS03A-LB LoRaWAN Temperature Sensor
1177 +* DS03A-LB or DS03A-LS LoRaWAN Temperature Sensor
1167 1167  
1168 1168  (% style="color:#037691" %)**Dimension and weight**:
1169 1169  
image-20240108160443-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +500.2 KB
Content
image-20240108161155-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +265.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0