Last modified by Xiaoling on 2025/04/17 17:20
<
From version < 38.3 >
edited by Xiaoling
on 2023/07/19 17:06
To version < 30.1 >
edited by Saxer Lin
on 2023/07/01 09:40
>
Change comment: Uploaded new attachment "image-20230701094042-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Saxer
Content
... ... @@ -71,7 +71,6 @@
71 71  * Wall Mountable
72 72  * Outdoor Use
73 73  
74 -
75 75  == 1.3 Specification ==
76 76  
77 77  
... ... @@ -80,6 +80,11 @@
80 80  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
81 81  * Operating Temperature: -40 ~~ 85°C
82 82  
82 +(% style="color:#037691" %)**Sensor Detect Distance:**
83 +
84 +* Wood Door: 10mm ~~ 30mm
85 +* Iron Door: 30 ~~ 45mm
86 +
83 83  (% style="color:#037691" %)**LoRa Spec:**
84 84  
85 85  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -100,7 +100,6 @@
100 100  * Sleep Mode: 5uA @ 3.3v
101 101  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
102 102  
103 -
104 104  == 1.4 Applications ==
105 105  
106 106  
... ... @@ -134,7 +134,6 @@
134 134  )))
135 135  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
136 136  
137 -
138 138  == 1.7 BLE connection ==
139 139  
140 140  
... ... @@ -154,7 +154,6 @@
154 154  
155 155  [[image:image-20230630160843-7.png]]
156 156  
157 -
158 158  == 1.9 Mechanical ==
159 159  
160 160  
... ... @@ -170,14 +170,6 @@
170 170  [[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
171 171  
172 172  
173 -== 1.10 Magnet Distance ==
174 -
175 -
176 -* Wood Door: 10mm ~~ 30mm
177 -* Iron Door: 30 ~~ 45mm
178 -
179 -
180 -
181 181  = 2. Configure DS03A-LB to connect to LoRaWAN network =
182 182  
183 183  == 2.1 How it works ==
... ... @@ -243,13 +243,11 @@
243 243  === 2.3.1 Device Status, FPORT~=5 ===
244 244  
245 245  
246 -Include device configure status. Once DS03A-LB Joined the network, it will uplink this message to the server. After that, DS03A-LB will uplink Device Status every 12 hours.
239 +Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
247 247  
248 -Users can also use the downlink command**(0x26 01)** to ask DS03A-LB to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
249 -
250 -
251 251  The Payload format is as below.
252 252  
243 +
253 253  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
254 254  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
255 255  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
... ... @@ -313,29 +313,32 @@
313 313  Ex2: 0x0B49 = 2889mV
314 314  
315 315  
316 -=== 2.3.2  Sensor Configuration, FPORT~=4 ===
307 +=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
317 317  
318 318  
319 -DS03A-LB will only send this command after getting the downlink command **(0x26 02)** from the server.
310 +DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
320 320  
321 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
322 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
323 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
312 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:723px" %)
313 +|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:721px" %)**Sensor Configuration FPORT=4**
314 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:99px" %)**2**|(% style="width:87px" %)**1**|(% style="width:97px" %)**2**|(% style="width:98px" %)**1**
324 324  |**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
325 325  Keep status1
317 +
318 +
326 326  )))|(% style="width:99px" %)(((
327 -Keep time1(unit: sec)
320 +Keep time1
321 +
322 +(unit: sec)
328 328  )))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
329 -Keep time2(unit: sec)
324 +Keep time2
325 +
326 +(unit: sec)
330 330  )))|(% style="width:98px" %)(((
331 -Alarm interval(unit: min)
328 +Alarm interval
329 +
330 +(unit: min)
332 332  )))
333 333  
334 -Example parse in TTNv3
335 -
336 -[[image:image-20230630155527-3.png||height="146" width="902"]]
337 -
338 -
339 339  * (((
340 340  (% style="color:blue" %)**TDC: (default: 0x001C20)**
341 341  )))
... ... @@ -359,8 +359,9 @@
359 359  (% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
360 360  )))
361 361  
362 -Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
356 +Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
363 363  
358 +[[image:image-20230630155527-3.png||height="146" width="902"]]
364 364  
365 365  
366 366  * (((
... ... @@ -375,16 +375,18 @@
375 375  
376 376  DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
377 377  
378 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
373 +* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
379 379  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
380 380  
381 -**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
376 +1)When **AT+TTRCHANNEL=1**, Uplink Payload totals 11 bytes. (**Default mode**)
382 382  
383 383  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
384 384  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
385 385  |(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
386 386  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
387 -Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
382 +Status
383 +
384 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
388 388  )))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
389 389  The last door open duration (unit: sec)
390 390  )))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
... ... @@ -391,161 +391,73 @@
391 391  
392 392  **Status & Alarm:**
393 393  
394 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
395 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
391 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:645px" %)
392 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:125px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit0**
396 396  |(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
397 397  Count mod
398 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
399 -Alarm 0: No Alarm; 1: Alarm
400 -)))|(% style="width:131px" %)(((
401 -Status 0: Close; 1: Open
402 -)))
395 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:125px" %)(((
396 +0: No Alarm;
403 403  
404 -[[image:image-20230630155451-2.png||height="246" width="928"]]
398 +1: Alarm
399 +)))|(% style="width:129px" %)(((
400 +Status 0: Close;
405 405  
406 -
407 -* (((
408 -(% style="color:blue" %)**Count mod:Default=0**
402 +1: Open
409 409  )))
410 410  
411 -0: Uplink total open door times since factory
405 +[[image:image-20230630155451-2.png||height="246" width="928"]]
412 412  
413 -1: Uplink total open door times since last FPORT=2 uplink.
414 414  
408 +2)When **AT+TTRCHANNEL=2**, Uplink Payload totals 18 bytes.
415 415  
416 -* (% style="color:blue" %)**TDC flag**
417 -
418 -When the flag is 1, it means sending packets at normal time intervals.
419 -
420 -Otherwise, it is a packet sent at non-TDC time.
421 -
422 -
423 -* (((
424 -(% style="color:#0000ff" %)**Alarm**
425 -)))
426 -
427 -See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
428 -
429 -
430 -* (((
431 -(% style="color:blue" %)**Status**
432 -)))
433 -
434 -This bit is 1 when the door sensor is open and 0 when it is close.
435 -
436 -
437 -* (((
438 -(% style="color:blue" %)**Total open door events**
439 -)))
440 -
441 -Total pulse/counting base on open door.
442 -
443 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
444 -
445 -
446 -* (((
447 -(% style="color:blue" %)**The last door open duration**
448 -)))
449 -
450 -Door sensor last open duration.
451 -
452 -Unit: sec.
453 -
454 -[[image:image-20230701094042-1.png||height="154" width="763"]]
455 -
456 -
457 -**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).
458 -
459 -(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
460 -
461 -(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
462 -
463 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
464 -|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
465 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
410 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
411 +|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**
412 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
466 466  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
467 -Status1 & Alarm1
414 +Status1
415 +
416 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
468 468  )))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
469 469  The last door open duration1 (unit: sec)
470 470  )))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
471 -Status2 & Alarm2
420 +Status2
421 +
422 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
472 472  )))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
473 473  
474 474  **Status1 & Alarm1:**
475 475  
476 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
477 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
478 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
427 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:730px" %)
428 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:167px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:171px" %)**bit0**
429 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
479 479  Count mod
480 -)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
481 -Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
482 -)))|(% style="width:181px" %)(((
483 -Status1 0: Close; 1: Open (PA8 of pin)
484 -)))
431 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:167px" %)(((
432 +0: No Alarm; 1: Alarm
485 485  
486 -**Status2 & Alarm2:**
434 +(PA8)
435 +)))|(% style="width:171px" %)(((
436 +Status 0: Close; 1:Open
487 487  
488 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
489 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
490 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
491 -Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
492 -)))|(% style="width:181px" %)(((
493 -Status2 0: Close; 1: Open (PA4 of pin)
438 +(PA8)
494 494  )))
495 495  
496 -[[image:image-20230630155908-6.png||height="295" width="927"]]
441 +**Status2 & Alarm2:**
497 497  
443 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:550px" %)
444 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:176px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:175px" %)**bit0**
445 +|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:176px" %)(((
446 +0: No Alarm; 1: Alarm
498 498  
499 -* (((
500 -(% style="color:blue" %)**Count mod:Default=0**
501 -)))
448 +(PA4)
449 +)))|(% style="width:175px" %)(((
450 +Status 0: Close,;1:Open
502 502  
503 -0: Uplink total open door times since factory
504 -
505 -1: Uplink total open door times since last FPORT=2 uplink.
506 -
507 -
508 -* (% style="color:blue" %)**TDC flag**
509 -
510 -When the flag is 1, it means sending packets at normal time intervals.
511 -
512 -Otherwise, it is a packet sent at non-TDC time.
513 -
514 -
515 -* (((
516 -(% style="color:#0000ff" %)**Alarm1 or Alarm2**
452 +(PA4)
517 517  )))
518 518  
519 -See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
455 +[[image:image-20230630155908-6.png||height="295" width="927"]]
520 520  
521 521  
522 -* (((
523 -(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
524 -)))
525 -
526 -This bit is 1 when the door sensor is open and 0 when it is close.
527 -
528 -
529 -* (((
530 -(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
531 -)))
532 -
533 -Total pulse/counting base on open door.
534 -
535 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
536 -
537 -
538 -* (((
539 -(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
540 -)))
541 -
542 -Door sensor last open duration.
543 -
544 -Unit: sec.
545 -
546 -[[image:image-20230701094042-1.png||height="154" width="763"]]
547 -
548 -
549 549  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
550 550  
551 551  
... ... @@ -553,11 +553,13 @@
553 553  
554 554  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
555 555  
556 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
465 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
557 557  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
558 -|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
467 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
559 559  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
560 -Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
469 +Status
470 +
471 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
561 561  )))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
562 562  The last door open duration (unit: sec)
563 563  )))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
... ... @@ -564,20 +564,22 @@
564 564  
565 565  **Status & Alarm:**
566 566  
567 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
568 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
478 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
479 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
569 569  |(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
570 570  Count mod
571 -)))|(% style="width:95px" %)(((
572 -TDC flag 0:No; 1:Yes
573 -)))|(% style="width:116px" %)(((
574 -Alarm 0: No Alarm; 1: Alarm
482 +)))|(% style="width:95px" %)TDC flag 0:No;1:Yes|(% style="width:116px" %)(((
483 +0: No Alarm;
484 +
485 +1: Alarm
575 575  )))|(% style="width:112px" %)(((
576 -Status 0:Close; 1: Open
487 +Status 0:Close;
488 +
489 +1: Open
577 577  )))
578 578  
579 579  * (((
580 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
493 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
581 581  )))
582 582  
583 583  For example, in the US915 band, the max payload for different DR is:
... ... @@ -614,7 +614,7 @@
614 614  
615 615  **Parsed Value:**
616 616  
617 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
530 +[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, DOOR_OPEN_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
618 618  
619 619  
620 620  [SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
... ... @@ -758,7 +758,6 @@
758 758  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
759 759  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
760 760  
761 -
762 762  == 3.2 General Commands ==
763 763  
764 764  
... ... @@ -806,47 +806,15 @@
806 806  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
807 807  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
808 808  
721 +=== 3.3.2  Enable / Disable Alarm ===
809 809  
810 -=== 3.3.2  Set Power Output Duration ===
811 811  
812 -
813 -Control the output duration 5V . Before each sampling, device will
814 -
815 -~1. first enable the power output to external sensor,
816 -
817 -2. keep it on as per duration, read sensor value and construct uplink payload
818 -
819 -3. final, close the power output.
820 -
821 -(% style="color:blue" %)**AT Command: AT+5VT**
822 -
823 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
824 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 204px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 149px;" %)**Response**
825 -|(% style="width:156px" %)AT+5VT=?|(% style="width:204px" %)Show 5V open time.|(% style="width:149px" %)0 (default)
826 -OK
827 -|(% style="width:156px" %)AT+5VT=500|(% style="width:204px" %)Close after a delay of 500 milliseconds.|(% style="width:149px" %)(((
828 -OK
829 -
830 -)))
831 -
832 -(% style="color:blue" %)**Downlink Command: 0x07**(%%)
833 -Format: Command Code (0x07) followed by 2 bytes.
834 -
835 -The first and second bytes are the time to turn on.
836 -
837 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
838 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
839 -
840 -
841 -=== 3.3.3  Enable / Disable Alarm ===
842 -
843 -
844 844  Feature: Enable/Disable Alarm for open/close event. Default value 0.
845 845  
846 846  (% style="color:blue" %)**AT Command: **
847 847  
848 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
849 -|(% style="background-color:#d9e2f3; color:#0070c0; width:153px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:276px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:86px" %)**Response**
728 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
729 +|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
850 850  |(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
851 851  |(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
852 852  
... ... @@ -857,11 +857,12 @@
857 857  0xA7 00  ~/~/ Same As AT+DISALARM=0
858 858  
859 859  
860 -=== 3.3.4  Alarm Base on Timeout ===
740 +=== 3.3.3  Alarm Base on Timeout ===
861 861  
862 862  
863 863  DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
864 864  
745 +
865 865  * (((
866 866  (% style="color:blue" %)**Keep Status: Status to be monitor**
867 867  )))
... ... @@ -897,7 +897,7 @@
897 897  **cc dd:** timeout.
898 898  
899 899  
900 -**1) AT+TTRIG1 : (PA8 of pin)**
781 +1)**AT+TTRIG1**:(PA8 of pin)
901 901  
902 902  (% style="color:blue" %)**AT Command to configure:**
903 903  
... ... @@ -916,11 +916,13 @@
916 916  
917 917  (% style="color:blue" %)**Downlink Command to configure:**
918 918  
919 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
800 +If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
920 920  
802 + 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
921 921  
922 -**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**
923 923  
805 +2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
806 +
924 924  (% style="color:blue" %)**AT Command to configure:**
925 925  
926 926  * (((
... ... @@ -938,12 +938,14 @@
938 938  
939 939  (% style="color:blue" %)**Downlink Command to configure:**
940 940  
941 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
824 +If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
942 942  
826 + 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
943 943  
944 -=== 3.3.5  TTRIG1 & TTRIG2 timeout status alarm ===
945 945  
829 +=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
946 946  
831 +
947 947  It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
948 948  
949 949  (% style="color:blue" %)**AT Command:**
... ... @@ -970,7 +970,7 @@
970 970  Example:  0C aa  => AT+TTRALARM= aa
971 971  
972 972  
973 -=== 3.3.6  Count Mod ===
858 +=== 3.3.5  Count Mod ===
974 974  
975 975  
976 976  Feature: Manually set the count mode.
... ... @@ -977,8 +977,8 @@
977 977  
978 978  (% style="color:blue" %)**AT Command:**
979 979  
980 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
981 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
865 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
866 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
982 982  |(% style="width:155px" %)(((
983 983  AT+COUNTMOD=0
984 984  )))|(% style="width:277px" %)(((
... ... @@ -989,7 +989,7 @@
989 989  |(% style="width:155px" %)(((
990 990  AT+COUNTMOD=1
991 991  )))|(% style="width:277px" %)(((
992 -the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)
877 +the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
993 993  )))|(% style="width:86px" %)(((
994 994  OK
995 995  )))
... ... @@ -999,7 +999,7 @@
999 999  Example:  0B aa  => AT+COUNTMOD = second byte
1000 1000  
1001 1001  
1002 -=== 3.3.7  Number of channel of door sensors ===
887 +=== 3.3.6  Number of channel of door sensors ===
1003 1003  
1004 1004  
1005 1005  Feature: Set the number of door sensor channels.
... ... @@ -1007,7 +1007,7 @@
1007 1007  (% style="color:blue" %)**AT Command:**
1008 1008  
1009 1009  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1010 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
895 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1011 1011  |(% style="width:155px" %)(((
1012 1012  AT+TTRCHANNEL=1
1013 1013  )))|(% style="width:259px" %)(((
... ... @@ -1028,7 +1028,7 @@
1028 1028  Example:  0D aa => AT+TTRCHANNEL = second byte
1029 1029  
1030 1030  
1031 -=== 3.3.8  Set Time Sync Mode ===
916 +=== 3.3.7  Set Time Sync Mode ===
1032 1032  
1033 1033  
1034 1034  Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
... ... @@ -1038,7 +1038,7 @@
1038 1038  (% style="color:blue" %)**AT Command:**
1039 1039  
1040 1040  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1041 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
926 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1042 1042  |(% style="width:155px" %)(((
1043 1043  AT+SYNCMOD=1
1044 1044  )))|(% style="width:259px" %)(((
... ... @@ -1066,41 +1066,41 @@
1066 1066  0x28 00  ~/~/ Same As AT+SYNCMOD=0
1067 1067  
1068 1068  
1069 -=== 3.3.9  Clear the open door times and the duration of the last open door ===
954 +=== 3.3.8  Clear the door open count and the duration of the last door open ===
1070 1070  
1071 1071  
1072 1072  (% style="color:blue" %)**AT Command:**
1073 1073  
1074 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1075 -|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1076 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
959 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
960 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
961 +|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the leak count and the duration of the last leak.|(% style="width:44px" %)(((
1077 1077  OK
1078 1078  )))
1079 1079  
1080 1080  (% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
1081 1081  
1082 -The sensor will clear the open door times and the duration of the last open door.
967 +The sensor will clear the door open count and the duration of the last door open.
1083 1083  
1084 1084  
1085 -=== 3.3.10  Set the count value of the number of open door ===
970 +=== 3.3.9  Set the count value of the number of door open ===
1086 1086  
1087 1087  
1088 1088  (% style="color:blue" %)**AT Command:**
1089 1089  
1090 1090  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1091 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
976 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1092 1092  |(% style="width:155px" %)(((
1093 1093  AT+SETCNT=1,100
1094 1094  )))|(% style="width:259px" %)(((
1095 -Set the open door times of PA8 pin to 100 times.
980 +Set the door open times of PA8 pin to 100 times.
1096 1096  )))|(% style="width:44px" %)(((
1097 1097  OK
1098 1098  )))
1099 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
984 +|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the door open times of PA8 pin.|(% style="width:44px" %)OK
1100 1100  |(% style="width:155px" %)(((
1101 1101  AT+SETCNT=2,50
1102 1102  )))|(% style="width:259px" %)(((
1103 -Set the open door times of PA4 pin to 100 times.
988 +Set the door open times of PA4 pin to 100 times.
1104 1104  )))|(% style="width:44px" %)(((
1105 1105  OK
1106 1106  )))
... ... @@ -1133,12 +1133,12 @@
1133 1133  
1134 1134  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1135 1135  
1136 -Methods to Update Firmware:
1137 1137  
1022 +**Methods to Update Firmware:**
1023 +
1138 1138  * (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1139 1139  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1140 1140  
1141 -
1142 1142  = 6. FAQ =
1143 1143  
1144 1144  
... ... @@ -1166,7 +1166,6 @@
1166 1166  
1167 1167  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1168 1168  
1169 -
1170 1170  = 8. ​Packing Info =
1171 1171  
1172 1172  
... ... @@ -1184,7 +1184,6 @@
1184 1184  
1185 1185  * Weight / pcs : g
1186 1186  
1187 -
1188 1188  = 9. Support =
1189 1189  
1190 1190  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0