Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 36.1 >
edited by Saxer Lin
on 2023/07/10 13:49
To version < 40.13 >
edited by Xiaoling
on 2024/01/08 17:33
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DS03A-LB Outdoor LoRaWAN Door Sensor User Manual
1 +DS03A-LB/LS -- Outdoor LoRaWAN Door Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,18 @@
1 +(% style="display:none" %) (%%)
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
4 +[[image:image-20240108161155-2.png]]
3 3  
4 4  
5 -**Table of Contents：**
6 6  
8 +
9 +
10 +
11 +
12 +
13 +
14 +**Table of Contents:**
15 +
7 7  {{toc/}}
8 8  
9 9  
... ... @@ -13,41 +13,41 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
25 +== 1.1 What is LoRaWAN Door Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
29 +The Dragino DS03A-LB/LS is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33 +The LoRa wireless technology used in DS03A-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
37 +The DS03A-LB/LS will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB/LS can count each open event and uplink periodically.
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
41 +DS03A-LB/LS supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
45 +DS03A-LB/LS has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 37  
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
47 +DS03A-LB/LS is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
51 +DS03A-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
55 +DS03A-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or (% style="color:blue" %)**solar powered + li-on battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
59 +Each DS03A-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
... ... @@ -67,9 +67,10 @@
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 -* 8500mAh Battery for long term use
71 71  * Wall Mountable
72 72  * Outdoor Use
81 +* 8500mAh Li/SOCl2 Battery (DS03A-LB)
82 +* Solar panel + 3000mAh Li-on battery (DS03A-LS)
73 73  
74 74  == 1.3 Specification ==
75 75  
... ... @@ -76,14 +76,9 @@
76 76  
77 77  (% style="color:#037691" %)**Common DC Characteristics:**
78 78  
79 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
89 +* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
80 80  * Operating Temperature: -40 ~~ 85°C
81 81  
82 -(% style="color:#037691" %)**Sensor Detect Distance:**
83 -
84 -* Wood Door: 10mm ~~ 30mm
85 -* Iron Door: 30 ~~ 45mm
86 -
87 87  (% style="color:#037691" %)**LoRa Spec:**
88 88  
89 89  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -121,11 +121,10 @@
121 121  == 1.6 Button & LEDs ==
122 122  
123 123  
124 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
125 125  
126 -
127 127  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
128 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
132 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
129 129  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
130 130  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
131 131  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -140,7 +140,7 @@
140 140  == 1.7 BLE connection ==
141 141  
142 142  
143 -DS03A-LB support BLE remote configure.
147 +DS03A-LB/LS support BLE remote configure.
144 144  
145 145  
146 146  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -159,25 +159,37 @@
159 159  
160 160  == 1.9 Mechanical ==
161 161  
166 +=== 1.9.1 for LB version ===
162 162  
168 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS75-LB_LoRaWAN_Distance_Detection_Sensor_User_Manual/WebHome/image-20240105152536-3.png?rev=1.1||alt="image-20240105152536-3.png"]]
169 +
170 +
171 +**Probe Mechanical:**
172 +
163 163  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
164 164  
165 165  
166 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
167 167  
177 +=== 1.9.2 for LS version ===
168 168  
169 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
170 170  
180 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
171 171  
172 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
173 173  
174 174  
175 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
176 176  
185 +== 1.10 Magnet Distance ==
186 +
187 +
188 +* Wood Door: 10mm ~~ 30mm
189 +* Iron Door: 30 ~~ 45mm
190 +
191 += 2. Configure DS03A-LB/LS to connect to LoRaWAN network =
192 +
177 177  == 2.1 How it works ==
178 178  
179 179  
180 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
196 +The DS03A-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
181 181  
182 182  
183 183  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -190,9 +190,9 @@
190 190  [[image:image-20230522092858-1.png||height="391" width="874"]]
191 191  
192 192  
193 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
209 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB/LS.
194 194  
195 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
211 +Each DS03A-LB/LS is shipped with a sticker with the default device EUI as below:
196 196  
197 197  [[image:image-20230426085205-1.png||height="238" width="512"]]
198 198  
... ... @@ -222,10 +222,10 @@
222 222  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
223 223  
224 224  
225 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
241 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB/LS
226 226  
227 227  
228 -Press the button for 5 seconds to activate the DS03A-LB.
244 +Press the button for 5 seconds to activate the DS03A-LB/LS.
229 229  
230 230  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
231 231  
... ... @@ -237,15 +237,15 @@
237 237  === 2.3.1 Device Status, FPORT~=5 ===
238 238  
239 239  
240 -Include device configure status. Once DS03A-LB Joined the network, it will uplink this message to the server. After that, DS03A-LB will uplink Device Status every 12 hours.
256 +Include device configure status. Once DS03A-LB/LS Joined the network, it will uplink this message to the server. After that, DS03A-LB/LS will uplink Device Status every 12 hours.
241 241  
242 -Users can also use the downlink command**(0x26 01)** to ask DS03A-LB to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
258 +Users can also use the downlink command**(0x26 01)** to ask DS03A-LB/LS to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
243 243  
244 244  
245 245  The Payload format is as below.
246 246  
247 247  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
248 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
264 +|(% colspan="6" style="background-color:#4F81BD;color:white" %)**Device Status (FPORT=5)**
249 249  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
250 250  |(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
251 251  
... ... @@ -254,7 +254,7 @@
254 254  [[image:image-20230630155406-1.png||height="190" width="873"]]
255 255  
256 256  
257 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB/LS, this value is 0x1B
258 258  
259 259  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
260 260  
... ... @@ -310,7 +310,7 @@
310 310  === 2.3.2  Sensor Configuration, FPORT~=4 ===
311 311  
312 312  
313 -DS03A-LB will only send this command after getting the downlink command **(0x26 02)** from the server.
329 +DS03A-LB/LS will only send this command after getting the downlink command **(0x26 02)** from the server.
314 314  
315 315  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
316 316  |(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
... ... @@ -341,9 +341,9 @@
341 341  (% style="color:blue" %)**Disalarm: (default: 0)**
342 342  )))
343 343  
344 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
360 + **If Disalarm = 1**, DS03A-LB/LS will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
345 345  
346 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
362 + **If Disalarm = 0**, DS03A-LB/LS will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
347 347  
348 348  
349 349  (% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
... ... @@ -367,7 +367,7 @@
367 367  === 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
368 368  
369 369  
370 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
386 +DS03A-LB/LS will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB/LS will send uplinks when:
371 371  
372 372  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
373 373  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
... ... @@ -375,7 +375,7 @@
375 375  **1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
376 376  
377 377  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
378 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
394 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
379 379  |(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
380 380  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
381 381  Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
... ... @@ -387,7 +387,7 @@
387 387  
388 388  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
389 389  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
390 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
406 +|(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
391 391  Count mod
392 392  )))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
393 393  Alarm 0: No Alarm; 1: Alarm
... ... @@ -455,7 +455,7 @@
455 455  (% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
456 456  
457 457  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
458 -|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
474 +|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
459 459  |(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
460 460  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
461 461  Status1 & Alarm1
... ... @@ -469,7 +469,7 @@
469 469  
470 470  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
471 471  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
472 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
488 +|(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
473 473  Count mod
474 474  )))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
475 475  Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
... ... @@ -481,7 +481,7 @@
481 481  
482 482  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
483 483  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
484 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
500 +|(% style="width:76px" %)Value|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
485 485  Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
486 486  )))|(% style="width:181px" %)(((
487 487  Status2 0: Close; 1: Open (PA4 of pin)
... ... @@ -543,12 +543,12 @@
543 543  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
544 544  
545 545  
546 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
562 +DS03A-LB/LS stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
547 547  
548 548  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
549 549  
550 550  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
551 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
567 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
552 552  |(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
553 553  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
554 554  Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
... ... @@ -560,7 +560,7 @@
560 560  
561 561  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
562 562  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
563 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
579 +|(% style="width:76px" %)Value|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
564 564  Count mod
565 565  )))|(% style="width:95px" %)(((
566 566  TDC flag 0:No; 1:Yes
... ... @@ -571,7 +571,7 @@
571 571  )))
572 572  
573 573  * (((
574 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
590 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB/LS will send max bytes according to the current DR and Frequency bands.
575 575  )))
576 576  
577 577  For example, in the US915 band, the max payload for different DR is:
... ... @@ -643,7 +643,7 @@
643 643  == 2.5 Datalog Feature ==
644 644  
645 645  
646 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
662 +(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB/LS will store the reading for future retrieving purposes.
647 647  
648 648  (% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
649 649  
... ... @@ -651,20 +651,17 @@
651 651  === 2.5.1 Ways to get datalog via LoRaWAN ===
652 652  
653 653  
654 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
670 +Set PNACKMD=1, DS03A-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network, DS03A-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
655 655  
656 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
657 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
672 +* a) DS03A-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
673 +* b) DS03A-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB/LS gets a ACK, DS03A-LB/LS will consider there is a network connection and resend all NONE-ACK Message.
658 658  
659 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
660 660  
661 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
662 662  
663 -
664 664  === 2.5.2 Unix TimeStamp ===
665 665  
666 666  
667 -DS03A-LB uses Unix TimeStamp format based on
680 +DS03A-LB/LS uses Unix TimeStamp format based on
668 668  
669 669  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
670 670  
... ... @@ -682,7 +682,7 @@
682 682  
683 683  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
684 684  
685 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
698 +Once DS03A-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB/LS. If DS03A-LB/LS fails to get the time from the server, DS03A-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
686 686  
687 687  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
688 688  
... ... @@ -695,7 +695,7 @@
695 695  
696 696  (% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
697 697  
698 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
711 +(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB/LS in Datacake.**
699 699  
700 700  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
701 701  
... ... @@ -730,7 +730,7 @@
730 730  == 2.7 Frequency Plans ==
731 731  
732 732  
733 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
746 +The DS03A-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
734 734  
735 735  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
736 736  
... ... @@ -741,12 +741,12 @@
741 741  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
742 742  
743 743  
744 -= 3. Configure DS03A-LB =
757 += 3. Configure DS03A-LB/LS =
745 745  
746 746  == 3.1 Configure Methods: ==
747 747  
748 748  
749 -DS03A-LB supports below configure method:
762 +DS03A-LB/LS supports below configure method:
750 750  
751 751  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
752 752  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -765,10 +765,10 @@
765 765  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
766 766  
767 767  
768 -== 3.3 Commands special design for DS03A-LB ==
781 +== 3.3 Commands special design for DS03A-LB/LS ==
769 769  
770 770  
771 -These commands only valid for DS03A-LB, as below:
784 +These commands only valid for DS03A-LB/LS, as below:
772 772  
773 773  
774 774  === 3.3.1  Set Transmit Interval Time ===
... ... @@ -799,9 +799,39 @@
799 799  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
800 800  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
801 801  
802 -=== 3.3.2  Enable / Disable Alarm ===
815 +=== 3.3.2  Set Power Output Duration ===
803 803  
804 804  
818 +Control the output duration 5V . Before each sampling, device will
819 +
820 +~1. first enable the power output to external sensor,
821 +
822 +2. keep it on as per duration, read sensor value and construct uplink payload
823 +
824 +3. final, close the power output.
825 +
826 +(% style="color:blue" %)**AT Command: AT+5VT**
827 +
828 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
829 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 204px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 149px;" %)**Response**
830 +|(% style="width:156px" %)AT+5VT=?|(% style="width:204px" %)Show 5V open time.|(% style="width:149px" %)0 (default)
831 +OK
832 +|(% style="width:156px" %)AT+5VT=500|(% style="width:204px" %)Close after a delay of 500 milliseconds.|(% style="width:149px" %)(((
833 +OK
834 +
835 +)))
836 +
837 +(% style="color:blue" %)**Downlink Command: 0x07**(%%)
838 +Format: Command Code (0x07) followed by 2 bytes.
839 +
840 +The first and second bytes are the time to turn on.
841 +
842 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
843 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
844 +
845 +=== 3.3.3  Enable / Disable Alarm ===
846 +
847 +
805 805  Feature: Enable/Disable Alarm for open/close event. Default value 0.
806 806  
807 807  (% style="color:blue" %)**AT Command: **
... ... @@ -818,10 +818,10 @@
818 818  0xA7 00  ~/~/ Same As AT+DISALARM=0
819 819  
820 820  
821 -=== 3.3.3  Alarm Base on Timeout ===
864 +=== 3.3.4  Alarm Base on Timeout ===
822 822  
823 823  
824 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
867 +DS03A-LB/LS can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
825 825  
826 826  * (((
827 827  (% style="color:blue" %)**Keep Status: Status to be monitor**
... ... @@ -863,9 +863,9 @@
863 863  (% style="color:blue" %)**AT Command to configure:**
864 864  
865 865  * (((
866 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
909 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
867 867  
868 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
911 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
869 869  )))
870 870  
871 871  * (((
... ... @@ -885,9 +885,9 @@
885 885  (% style="color:blue" %)**AT Command to configure:**
886 886  
887 887  * (((
888 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
931 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
889 889  
890 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
933 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
891 891  )))
892 892  
893 893  * (((
... ... @@ -902,7 +902,7 @@
902 902  If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
903 903  
904 904  
905 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
948 +=== 3.3.5  TTRIG1 & TTRIG2 timeout status alarm ===
906 906  
907 907  
908 908  It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
... ... @@ -910,7 +910,7 @@
910 910  (% style="color:blue" %)**AT Command:**
911 911  
912 912  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
913 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
956 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**
914 914  |(% style="width:155px" %)(((
915 915  AT+TTRALARM=0
916 916  )))|(% style="width:279px" %)(((
... ... @@ -931,7 +931,7 @@
931 931  Example:  0C aa  => AT+TTRALARM= aa
932 932  
933 933  
934 -=== 3.3.5  Count Mod ===
977 +=== 3.3.6  Count Mod ===
935 935  
936 936  
937 937  Feature: Manually set the count mode.
... ... @@ -939,7 +939,7 @@
939 939  (% style="color:blue" %)**AT Command:**
940 940  
941 941  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
942 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
985 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
943 943  |(% style="width:155px" %)(((
944 944  AT+COUNTMOD=0
945 945  )))|(% style="width:277px" %)(((
... ... @@ -960,7 +960,7 @@
960 960  Example:  0B aa  => AT+COUNTMOD = second byte
961 961  
962 962  
963 -=== 3.3.6  Number of channel of door sensors ===
1006 +=== 3.3.7  Number of channel of door sensors ===
964 964  
965 965  
966 966  Feature: Set the number of door sensor channels.
... ... @@ -968,7 +968,7 @@
968 968  (% style="color:blue" %)**AT Command:**
969 969  
970 970  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
971 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1014 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
972 972  |(% style="width:155px" %)(((
973 973  AT+TTRCHANNEL=1
974 974  )))|(% style="width:259px" %)(((
... ... @@ -989,7 +989,7 @@
989 989  Example:  0D aa => AT+TTRCHANNEL = second byte
990 990  
991 991  
992 -=== 3.3.7  Set Time Sync Mode ===
1035 +=== 3.3.8  Set Time Sync Mode ===
993 993  
994 994  
995 995  Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
... ... @@ -999,7 +999,7 @@
999 999  (% style="color:blue" %)**AT Command:**
1000 1000  
1001 1001  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1002 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1045 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1003 1003  |(% style="width:155px" %)(((
1004 1004  AT+SYNCMOD=1
1005 1005  )))|(% style="width:259px" %)(((
... ... @@ -1027,13 +1027,13 @@
1027 1027  0x28 00  ~/~/ Same As AT+SYNCMOD=0
1028 1028  
1029 1029  
1030 -=== 3.3.8  Clear the open door times and the duration of the last open door ===
1073 +=== 3.3.9  Clear the open door times and the duration of the last open door ===
1031 1031  
1032 1032  
1033 1033  (% style="color:blue" %)**AT Command:**
1034 1034  
1035 1035  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1036 -|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1079 +|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1037 1037  |(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1038 1038  OK
1039 1039  )))
... ... @@ -1043,13 +1043,13 @@
1043 1043  The sensor will clear the open door times and the duration of the last open door.
1044 1044  
1045 1045  
1046 -=== 3.3.9  Set the count value of the number of open door ===
1089 +=== 3.3.10  Set the count value of the number of open door ===
1047 1047  
1048 1048  
1049 1049  (% style="color:blue" %)**AT Command:**
1050 1050  
1051 1051  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1052 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1095 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1053 1053  |(% style="width:155px" %)(((
1054 1054  AT+SETCNT=1,100
1055 1055  )))|(% style="width:259px" %)(((
... ... @@ -1078,7 +1078,7 @@
1078 1078  = 4. Battery & Power Consumption =
1079 1079  
1080 1080  
1081 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1124 +DS03A-LB use ER26500 + SPC1520 battery pack and DS03A-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1082 1082  
1083 1083  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1084 1084  
... ... @@ -1086,7 +1086,7 @@
1086 1086  = 5. OTA firmware update =
1087 1087  
1088 1088  
1089 -User can change firmware DS03A-LB to:
1132 +User can change firmware DS03A-LB/LS to:
1090 1090  
1091 1091  * Change Frequency band/ region.
1092 1092  * Update with new features.
... ... @@ -1106,7 +1106,7 @@
1106 1106  = 7. Order Info =
1107 1107  
1108 1108  
1109 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
1152 +**Part Number: (% style="color:blue" %)DS03A-LB-XX (%%)or (% style="color:blue" %)DS03A-LS-XX(%%)**
1110 1110  
1111 1111  (% style="color:red" %)**XX**(%%): The default frequency band
1112 1112  
... ... @@ -1131,7 +1131,7 @@
1131 1131  
1132 1132  (% style="color:#037691" %)**Package Includes**:
1133 1133  
1134 -* DS03A-LB LoRaWAN Temperature Sensor
1177 +* DS03A-LB or DS03A-LS LoRaWAN Temperature Sensor
1135 1135  
1136 1136  (% style="color:#037691" %)**Dimension and weight**:
1137 1137  
image-20240108160443-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +500.2 KB
Content
image-20240108161155-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +265.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0