Skip to Content
Last modified by Mengting Qiu on 2025/07/03 16:36
From version 35.1
edited by Saxer Lin
on 2023/07/10 13:44
Change comment: There is no comment for this version
To version 1.1
edited by Edwin Chen
on 2023/04/22 23:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Edwin
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
1 +
3 3  
4 4  
5 5  **Table of Contents：**
... ... @@ -13,63 +13,55 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
15 +== 1.1 What is D2x-LB LoRaWAN Temperature Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
19 +The Dragino D2x-LB is a (% style="color:blue" %)**LoRaWAN Temperature Sensor**(%%) for Internet of Things solution. D2x-LB has 1 ~~ 3 temperature probes. D2x-LB will convert the Temperature reading to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
23 +The LoRa wireless technology used in D2x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
27 +The temperature sensor used in D2x-LB can (% style="color:blue" %)**measure -55°C ~~ 125°C with accuracy ±0.5°C (max ±2.0 °C)**(%%).
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
31 +D2x-LB supports (% style="color:blue" %)**temperature alarm feature,**(%%) user can set temperature alarm for instant notice. D2x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
35 +D2x-LB has max 3 probes which measure maximum 3 temperature points.
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
39 +D2x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
43 +D2x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
47 +Each D2x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
54 -[[image:image-20230522092934-2.png||height="346" width="774"]]
55 -
56 -
57 57  == 1.2 ​Features ==
58 58  
59 -
60 60  * LoRaWAN 1.0.3 Class A
61 61  * Ultra-low power consumption
55 +* 1 ~~ 3 External Temperature Probes
56 +* Measure range -55°C ~~ 125°C
57 +* Temperature alarm
62 62  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
63 -* Door Open/Close detect
64 -* Door open/close statistics
65 -* Datalog Feature, Open Alarm Feature
66 66  * Support Bluetooth v5.1 and LoRaWAN remote configure
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 70  * 8500mAh Battery for long term use
71 -* Wall Mountable
72 -* Outdoor Use
73 73  
74 74  
75 75  == 1.3 Specification ==
... ... @@ -80,10 +80,11 @@
80 80  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
81 81  * Operating Temperature: -40 ~~ 85°C
82 82  
83 -(% style="color:#037691" %)**Sensor Detect Distance:**
74 +(% style="color:#037691" %)**Temperature Sensor:**
84 84  
85 -* Wood Door: 10mm ~~ 30mm
86 -* Iron Door: 30 ~~ 45mm
76 +* Dallas DS18B20
77 +* Range: -55 to + 125°C
78 +* Accuracy ±0.5°C (max ±2.0 °C).
87 87  
88 88  (% style="color:#037691" %)**LoRa Spec:**
89 89  
... ... @@ -106,24 +106,18 @@
106 106  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
107 107  
108 108  
109 -== 1.4 Applications ==
101 +== 1.4 Sleep mode and working mode ==
110 110  
111 111  
112 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]
113 -
114 -
115 -== 1.5 Sleep mode and working mode ==
116 -
117 -
118 118  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
119 119  
120 120  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
121 121  
122 122  
123 -== 1.6 Button & LEDs ==
109 +== 1.5 Button & LEDs ==
124 124  
125 125  
126 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
112 +[[image:1675071855856-879.png]]
127 127  
128 128  
129 129  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
... ... @@ -137,13 +137,13 @@
137 137  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
138 138  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
139 139  )))
140 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
126 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means D2x-LB is in Deep Sleep Mode.
141 141  
142 142  
143 -== 1.7 BLE connection ==
129 +== 1.6 BLE connection ==
144 144  
145 145  
146 -DS03A-LB support BLE remote configure.
132 +D2x-LB support BLE remote configure.
147 147  
148 148  
149 149  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -155,83 +155,112 @@
155 155  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
156 156  
157 157  
158 -== 1.8 Pin Definitions ==
144 +== 1.7  Hardware Variant ==
159 159  
160 -[[image:image-20230630160843-7.png]]
161 161  
147 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
148 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
149 +|(% style="width:102px" %)D20-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
150 +1 x DS28B20 Probe
162 162  
163 -== 1.9 Mechanical ==
152 +Cable Length : 2 meters
164 164  
154 +
155 +)))
156 +|(% style="width:102px" %)D22-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 +2 x DS28B20 Probes
165 165  
166 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
159 +Cable lengths total 1.5meters per probe
167 167  
161 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K21G-210811.pdf]]
162 +)))
163 +|(% style="width:102px" %)(((
164 +(((
165 +D23-LB
166 +)))
168 168  
169 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
168 +(((
169 +
170 +)))
171 +)))|(% style="width:190px" %) |(% style="width:297px" %)(((
172 +3 x DS28B20 Probes
170 170  
174 +Cable lengths total 1.5meters per probe
171 171  
172 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
176 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K31G-210811.pdf]]
177 +)))
173 173  
179 +(% style="display:none" %)
174 174  
175 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
176 176  
177 177  
178 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
183 +== 1.8 Mechanical ==
179 179  
185 +
186 +[[image:1675143884058-338.png]]
187 +
188 +
189 +[[image:1675143899218-599.png]]
190 +
191 +
192 +[[image:1675143909447-639.png]]
193 +
194 +
195 += 2. Configure D2x-LB to connect to LoRaWAN network =
196 +
180 180  == 2.1 How it works ==
181 181  
182 182  
183 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
200 +The D2x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the D2x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
184 184  
185 185  
186 186  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
187 187  
188 188  
189 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
206 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190 190  
191 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
193 -[[image:image-20230522092858-1.png||height="391" width="874"]]
209 +The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
194 194  
195 195  
196 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
212 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from D2x-LB.
197 197  
198 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
214 +Each D2x-LB is shipped with a sticker with the default device EUI as below:
199 199  
200 -[[image:image-20230426085205-1.png||height="238" width="512"]]
216 +[[image:image-20230131134744-2.jpeg]]
201 201  
202 202  
219 +
203 203  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
204 204  
205 -(% style="display:none" %) (%%)
206 206  
207 207  (% style="color:blue" %)**Register the device**
208 208  
225 +[[image:1675144099263-405.png]]
209 209  
210 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)
211 211  
212 -
213 213  (% style="color:blue" %)**Add APP EUI and DEV EUI**
214 214  
215 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]
230 +[[image:1675144117571-832.png]]
216 216  
217 217  
218 218  (% style="color:blue" %)**Add APP EUI in the application**
219 219  
220 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]
221 221  
236 +[[image:1675144143021-195.png]]
222 222  
238 +
223 223  (% style="color:blue" %)**Add APP KEY**
224 224  
225 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
241 +[[image:1675144157838-392.png]]
226 226  
243 +(% style="color:blue" %)**Step 2:**(%%) Activate on D2x-LB
227 227  
228 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
229 229  
246 +Press the button for 5 seconds to activate the D2x-LB.
230 230  
231 -Press the button for 5 seconds to activate the DS03A-LB.
248 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
232 232  
233 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
234 -
235 235  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
236 236  
237 237  
... ... @@ -240,10 +240,11 @@
240 240  === 2.3.1 Device Status, FPORT~=5 ===
241 241  
242 242  
243 -Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
258 +Users can use the downlink command(**0x26 01**) to ask D2x-LB to send device configure detail, include device configure status. D2x-LB will uplink a payload via FPort=5 to server.
244 244  
245 245  The Payload format is as below.
246 246  
262 +
247 247  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
248 248  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
249 249  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
... ... @@ -251,42 +251,42 @@
251 251  
252 252  Example parse in TTNv3
253 253  
254 -[[image:image-20230630155406-1.png||height="190" width="873"]]
270 +[[image:image-20230415153147-2.png||height="220" width="1120"]]
255 255  
256 256  
257 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For D2x-LB, this value is 0x19
258 258  
259 259  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
260 260  
261 261  (% style="color:#037691" %)**Frequency Band**:
262 262  
263 -0x01: EU868
279 +*0x01: EU868
264 264  
265 -0x02: US915
281 +*0x02: US915
266 266  
267 -0x03: IN865
283 +*0x03: IN865
268 268  
269 -0x04: AU915
285 +*0x04: AU915
270 270  
271 -0x05: KZ865
287 +*0x05: KZ865
272 272  
273 -0x06: RU864
289 +*0x06: RU864
274 274  
275 -0x07: AS923
291 +*0x07: AS923
276 276  
277 -0x08: AS923-1
293 +*0x08: AS923-1
278 278  
279 -0x09: AS923-2
295 +*0x09: AS923-2
280 280  
281 -0x0a: AS923-3
297 +*0x0a: AS923-3
282 282  
283 -0x0b: CN470
299 +*0x0b: CN470
284 284  
285 -0x0c: EU433
301 +*0x0c: EU433
286 286  
287 -0x0d: KR920
303 +*0x0d: KR920
288 288  
289 -0x0e: MA869
305 +*0x0e: MA869
290 290  
291 291  
292 292  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -307,430 +307,282 @@
307 307  Ex2: 0x0B49 = 2889mV
308 308  
309 309  
310 -=== 2.3.2  Sensor Configuration, FPORT~=4 ===
326 +=== 2.3.2  Sensor Data. FPORT~=2 ===
311 311  
312 312  
313 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
329 +D2x-LB will uplink below payload via FPORT=2 after Joined LoRaWAN Network.
314 314  
315 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
316 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
317 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
318 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
319 -Keep status1
331 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
332 +|=(% style="width: 62.5px;background-color:#D9E2F3" %)(((
333 +**Size(bytes)**
334 +)))|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 120px;background-color:#D9E2F3" %)2|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 65px;background-color:#D9E2F3" %)1|=(% style="width: 65px;background-color:#D9E2F3" %)**2**|=(% style="width: 65px;background-color:#D9E2F3" %)2
335 +|(% style="width:65px" %)**Value**|(((
336 +[[Battery>>||anchor="HBattery:"]]
337 +)))|(% style="width:91px" %)(((
338 +[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]
339 +)))|(% style="width:61px" %)(((
340 +ignore
341 +)))|(% style="width:91px" %)(((
342 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
320 320  )))|(% style="width:99px" %)(((
321 -Keep time1(unit: sec)
322 -)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
323 -Keep time2(unit: sec)
324 -)))|(% style="width:98px" %)(((
325 -Alarm interval(unit: min)
344 +[[Temp_White>>||anchor="HTemperatureWhite:"]]
345 +)))|(% style="width:97px" %)(((
346 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
347 +
348 +
326 326  )))
327 327  
328 -Example parse in TTNv3
351 +**Payload per each model.**
329 329  
330 -[[image:image-20230630155527-3.png||height="146" width="902"]]
353 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220916152530-2.png?rev=1.1||alt="image-20220916152530-2.png" height="240" width="901"]]
331 331  
332 332  
333 -* (((
334 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
335 -)))
356 +[[image:image-20230415154139-3.png||height="215" width="1179"]]
336 336  
337 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
338 338  
359 +==== (% style="color:#4472c4" %)**Decode corresponding probe color：**(%%) ====
339 339  
340 -* (((
341 -(% style="color:blue" %)**Disalarm: (default: 0)**
342 -)))
361 +**D20:**
343 343  
344 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
363 +Red <~-~-> C1
345 345  
346 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
365 +**D22:**
347 347  
367 +White <~-~-> C1 Red <~-~-> C2
348 348  
349 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
369 +**D23:**
350 350  
371 +White <~-~->C1 Red <~-~-> C2 Black <~-~-> C3
351 351  
352 -* (((
353 -(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
354 -)))
355 355  
356 -Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
357 357  
375 +==== (% style="color:#4472c4" %)**Battery:**(%%) ====
358 358  
377 +Sensor Battery Level.
359 359  
360 -* (((
361 -(% style="color:blue" %)**Alarm interval(default: 0)**
362 -)))
379 +Ex1: 0x0B45 = 2885mV
363 363  
364 -When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
381 +Ex2: 0x0B49 = 2889mV
365 365  
366 366  
367 -=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
368 368  
385 +==== (% style="color:#4472c4" %)**Temperature RED or Temperature White :**(%%) ====
369 369  
370 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
387 +**This point to the Red probe in D20-LB or the probe of D22-LB/D23-LB White**
371 371  
372 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
373 -* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
389 +**Example**:
374 374  
375 -**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
391 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
376 376  
377 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
378 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
379 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
380 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
381 -Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
382 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
383 -The last door open duration (unit: sec)
384 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
393 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
385 385  
386 -**Status & Alarm:**
395 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
387 387  
388 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
389 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
390 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
391 -Count mod
392 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
393 -Alarm 0: No Alarm; 1: Alarm
394 -)))|(% style="width:131px" %)(((
395 -Status 0: Close; 1: Open
396 -)))
397 397  
398 -[[image:image-20230630155451-2.png||height="246" width="928"]]
399 399  
399 +==== (% style="color:#4472c4" %)**Temperature White:**(%%) ====
400 400  
401 -* (((
402 -(% style="color:blue" %)**Count mod:Default=0**
403 -)))
404 404  
405 -0: Uplink total open door times since factory
402 +**This point to the Red probe in D22-LB/D23-LB**
406 406  
407 -1: Uplink total open door times since last FPORT=2 uplink.
408 408  
405 +**Example**:
409 409  
410 -* (% style="color:blue" %)**TDC flag**
407 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
411 411  
412 -When the flag is 1, it means sending packets at normal time intervals.
409 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
413 413  
414 -Otherwise, it is a packet sent at non-TDC time.
411 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
415 415  
416 416  
417 -* (((
418 -(% style="color:#0000ff" %)**Alarm**
419 -)))
420 420  
421 -See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
415 +==== (% style="color:#4472c4" %)**Temperature Black:**(%%) ====
422 422  
423 423  
424 -* (((
425 -(% style="color:blue" %)**Status**
426 -)))
418 +**This point to the BLACK probe in D23-LB**
427 427  
428 -This bit is 1 when the door sensor is open and 0 when it is close.
429 429  
421 +**Example**:
430 430  
431 -* (((
432 -(% style="color:blue" %)**Total open door events**
433 -)))
423 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
434 434  
435 -Total pulse/counting base on open door.
425 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
436 436  
437 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
427 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
438 438  
439 439  
440 -* (((
441 -(% style="color:blue" %)**The last door open duration**
442 -)))
443 443  
444 -Door sensor last open duration.
431 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
445 445  
446 -Unit: sec.
447 447  
448 -[[image:image-20230701094042-1.png||height="154" width="763"]]
434 +**Example:**
449 449  
436 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
450 450  
451 -**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).
438 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
452 452  
453 -(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
454 454  
455 -(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
441 +== 2.4 Payload Decoder file ==
456 456  
457 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
458 -|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
459 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
460 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
461 -Status1 & Alarm1
462 -)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
463 -The last door open duration1 (unit: sec)
464 -)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
465 -Status2 & Alarm2
466 -)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
467 467  
468 -**Status1 & Alarm1:**
469 -
470 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
471 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
472 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
473 -Count mod
474 -)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
475 -Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
476 -)))|(% style="width:181px" %)(((
477 -Status1 0: Close; 1: Open (PA8 of pin)
444 +(((
445 +In TTN, use can add a custom payload so it shows friendly. 
478 478  )))
479 479  
480 -**Status2 & Alarm2:**
481 -
482 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
483 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
484 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
485 -Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
486 -)))|(% style="width:181px" %)(((
487 -Status2 0: Close; 1: Open (PA4 of pin)
448 +(((
449 +In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
488 488  )))
489 489  
490 -[[image:image-20230630155908-6.png||height="295" width="927"]]
491 491  
453 +== 2.5 Datalog Feature ==
492 492  
493 -* (((
494 -(% style="color:blue" %)**Count mod:Default=0**
495 -)))
496 496  
497 -0: Uplink total open door times since factory
456 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, D2x-LB will store the reading for future retrieving purposes.
498 498  
499 -1: Uplink total open door times since last FPORT=2 uplink.
500 500  
459 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
501 501  
502 -* (% style="color:blue" %)**TDC flag**
503 503  
504 -When the flag is 1, it means sending packets at normal time intervals.
462 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], D2x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,D2x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
505 505  
506 -Otherwise, it is a packet sent at non-TDC time.
464 +* a) D2x-LB will do an ACK check for data records sending to make sure every data arrive server.
465 +* b) D2x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but D2x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if D2x-LB gets a ACK, D2x-LB will consider there is a network connection and resend all NONE-ACK Message.
507 507  
467 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
508 508  
509 -* (((
510 -(% style="color:#0000ff" %)**Alarm1 or Alarm2**
511 -)))
469 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
512 512  
513 -See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
471 +=== 2.5.2 Unix TimeStamp ===
514 514  
515 515  
516 -* (((
517 -(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
518 -)))
474 +D2x-LB uses Unix TimeStamp format based on
519 519  
520 -This bit is 1 when the door sensor is open and 0 when it is close.
476 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
521 521  
478 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
522 522  
523 -* (((
524 -(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
525 -)))
480 +Below is the converter example
526 526  
527 -Total pulse/counting base on open door.
482 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
528 528  
529 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
484 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
530 530  
531 531  
532 -* (((
533 -(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
534 -)))
487 +=== 2.5.3 Set Device Time ===
535 535  
536 -Door sensor last open duration.
537 537  
538 -Unit: sec.
490 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
539 539  
540 -[[image:image-20230701094042-1.png||height="154" width="763"]]
492 +Once D2x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to D2x-LB. If D2x-LB fails to get the time from the server, D2x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
541 541  
494 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
542 542  
543 -=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
544 544  
497 +=== 2.5.4 Datalog Uplink payload  (FPORT~=3) ===
545 545  
546 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
547 547  
548 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
500 +The Datalog poll reply uplink will use below payload format.
549 549  
550 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
551 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
552 -|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
553 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
554 -Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
555 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
556 -The last door open duration (unit: sec)
557 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
502 +**Retrieval data payload:**
558 558  
559 -**Status & Alarm:**
504 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
505 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
506 +**Size(bytes)**
507 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 115px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 80px; background-color: rgb(217, 226, 243);" %)**4**
508 +|(% style="width:93px" %)**Value**|(% style="width:54px" %)(((
509 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
510 +)))|(% style="width:54px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:87px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:104px" %)Poll message flag & Ext|(% style="width:55px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
560 560  
561 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
562 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
563 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
564 -Count mod
565 -)))|(% style="width:95px" %)(((
566 -TDC flag 0:No; 1:Yes
567 -)))|(% style="width:116px" %)(((
568 -Alarm 0: No Alarm; 1: Alarm
569 -)))|(% style="width:112px" %)(((
570 -Status 0:Close; 1: Open
571 -)))
512 +**Poll message flag & Ext:**
572 572  
573 -* (((
574 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
575 -)))
514 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
576 576  
577 -For example, in the US915 band, the max payload for different DR is:
516 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
578 578  
579 -(((
580 -**~1. DR0**: max is 11 bytes so one entry of data
581 -)))
518 +**Poll Message Flag**: 1: This message is a poll message reply.
582 582  
583 -(((
584 -**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
585 -)))
520 +* Poll Message Flag is set to 1.
586 586  
587 -(((
588 -**3. DR2**: total payload includes 11 entries of data
589 -)))
522 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
590 590  
591 -(((
592 -**4. DR3**: total payload includes 22 entries of data.
593 -)))
524 +For example, in US915 band, the max payload for different DR is:
594 594  
595 -If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
526 +**a) DR0:** max is 11 bytes so one entry of data
596 596  
597 -[[image:image-20230630155556-4.png||height="146" width="938"]]
528 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
598 598  
599 -**Downlink:**
530 +**c) DR2:** total payload includes 11 entries of data
600 600  
601 -0x31 64 9E 7D 34 64 9E 7E 9C 05
532 +**d) DR3: **total payload includes 22 entries of data.
602 602  
534 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
603 603  
604 -**Uplink:**
605 605  
606 -45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
537 +**Example:**
607 607  
539 +If D2x-LB has below data inside Flash:
608 608  
609 -**Parsed Value:**
541 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
610 610  
611 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
543 +If user sends below downlink command: 3160065F9760066DA705
612 612  
545 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
613 613  
614 -[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
547 + Stop time: 60066DA7= time 21/1/19 05:27:03
615 615  
616 -[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
617 617  
618 -[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
550 +**D2x-LB will uplink this payload.**
619 619  
620 -[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
552 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
621 621  
622 -[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
554 +(((
555 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
556 +)))
623 623  
624 -[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
558 +(((
559 +Where the first 11 bytes is for the first entry:
560 +)))
625 625  
626 -[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
562 +(((
563 +7FFF089801464160065F97
564 +)))
627 627  
628 -[[image:image-20230630172740-1.png||height="199" width="868"]]
566 +(((
567 +**Ext sensor data**=0x7FFF/100=327.67
568 +)))
629 629  
570 +(((
571 +**Temp**=0x088E/100=22.00
572 +)))
630 630  
631 -== 2.4 Payload Decoder file ==
574 +(((
575 +**Hum**=0x014B/10=32.6
576 +)))
632 632  
633 -
634 634  (((
635 -In TTN, use can add a custom payload so it shows friendly. 
579 +**poll message flag & Ext**=0x41,means reply data,Ext=1
636 636  )))
637 637  
638 638  (((
639 -In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
583 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
640 640  )))
641 641  
642 642  
643 -== 2.5 Datalog Feature ==
587 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
644 644  
589 +== 2.6 Temperature Alarm Feature ==
645 645  
646 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
647 647  
648 -(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
592 +D2x-LB work flow with Alarm feature.
649 649  
650 650  
651 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
595 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
652 652  
653 653  
654 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
655 -
656 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
657 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
658 -
659 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
660 -
661 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
662 -
663 -
664 -=== 2.5.2 Unix TimeStamp ===
665 -
666 -
667 -DS03A-LB uses Unix TimeStamp format based on
668 -
669 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
670 -
671 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
672 -
673 -Below is the converter example
674 -
675 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
676 -
677 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
678 -
679 -
680 -=== 2.5.3 Set Device Time ===
681 -
682 -
683 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
684 -
685 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
686 -
687 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
688 -
689 -
690 -== 2.6 ​Show Data in DataCake IoT Server ==
691 -
692 -
693 -Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
694 -
695 -
696 -(% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
697 -
698 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
699 -
700 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
701 -
702 -
703 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]
704 -
705 -
706 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]
707 -
708 -
709 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]
710 -
711 -
712 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]
713 -
714 -
715 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]
716 -
717 -
718 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]
719 -
720 -
721 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]
722 -
723 -
724 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]
725 -
726 -
727 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]
728 -
729 -
730 730  == 2.7 Frequency Plans ==
731 731  
732 732  
733 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
601 +The D2x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
734 734  
735 735  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
736 736  
... ... @@ -738,15 +738,17 @@
738 738  == 2.8 ​Firmware Change Log ==
739 739  
740 740  
741 -**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
609 +**Firmware download link:**
742 742  
611 +[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
743 743  
744 -= 3. Configure DS03A-LB =
745 745  
614 += 3. Configure D2x-LB =
615 +
746 746  == 3.1 Configure Methods: ==
747 747  
748 748  
749 -DS03A-LB supports below configure method:
619 +D2x-LB supports below configure method:
750 750  
751 751  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
752 752  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -766,13 +766,13 @@
766 766  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
767 767  
768 768  
769 -== 3.3 Commands special design for DS03A-LB ==
639 +== 3.3 Commands special design for D2x-LB ==
770 770  
771 771  
772 -These commands only valid for DS03A-LB, as below:
642 +These commands only valid for D2x-LB, as below:
773 773  
774 774  
775 -=== 3.3.1  Set Transmit Interval Time ===
645 +=== 3.3.1 Set Transmit Interval Time ===
776 776  
777 777  
778 778  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -780,7 +780,7 @@
780 780  (% style="color:blue" %)**AT Command: AT+TDC**
781 781  
782 782  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
783 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
653 +|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
784 784  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
785 785  30000
786 786  OK
... ... @@ -801,286 +801,129 @@
801 801  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
802 802  
803 803  
804 -=== 3.3.2  Enable / Disable Alarm ===
674 +=== 3.3.2 Get Device Status ===
805 805  
806 806  
807 -Feature: Enable/Disable Alarm for open/close event. Default value 0.
677 +Send a LoRaWAN downlink to ask device send Alarm settings.
808 808  
809 -(% style="color:blue" %)**AT Command: **
679 +* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
810 810  
811 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
812 -|(% style="background-color:#d9e2f3; color:#0070c0; width:153px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:276px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:86px" %)**Response**
813 -|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
814 -|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
681 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
815 815  
816 -(% style="color:blue" %)**Downlink Command: **
817 817  
818 -0xA7 01  ~/~/ Same As AT+DISALARM=1
684 +=== 3.3.3 Set Alarm Thredhold ===
819 819  
820 -0xA7 00  ~/~/ Same As AT+DISALARM=0
821 821  
687 +(% style="color:blue" %)**1.  Set for All Probes:**
822 822  
823 -=== 3.3.3  Alarm Base on Timeout ===
689 +(% style="color:#037691" %)**AT+18ALARM=min,max**
824 824  
691 +* When min=0, and max≠0, Alarm trigger when higher than max
692 +* When min≠0, and max=0, Alarm trigger when lower than min
693 +* When min≠0 and max≠0, Alarm trigger when higher than max or lower than min
825 825  
826 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
695 +**Example:**
827 827  
828 -* (((
829 -(% style="color:blue" %)**Keep Status: Status to be monitor**
830 -)))
697 + AT+18ALARM=-10,30  ~/~/ Alarm when < -10 or higher than 30.
831 831  
832 -(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
833 833  
834 -(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
700 +* (% style="color:blue" %)**Downlink Payload:**
835 835  
702 +0x(0B F6 1E)   ~/~/ Same as AT+18ALARM=-10,30
836 836  
837 -* (((
838 -(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
839 -)))
704 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
840 840  
841 -Range 0 ~~ 65535(0xFFFF) seconds.
842 842  
843 -If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
707 +(% style="color:blue" %)**2.  Set for Separate Probe:**
844 844  
845 -If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
709 +(% style="color:#037691" %)**AT+18ALARM=min,max,index**
846 846  
711 +Index:
847 847  
848 -* (((
849 -(% style="color:blue" %)**Downlink Command**
850 -)))
713 +* 1: Temperature_Red
714 +* 2: Temperature_White
715 +* 3: Temperature_Black
851 851  
852 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
717 +**Example:**
853 853  
854 -**A9:** Command Type Code
719 + AT+18ALARM=-10,30,1   ~/~/ Alarm when temperature_red < -10 or higher than 30.
855 855  
856 -**aa: **01:TTRIG1; 02:TTRIG2
857 857  
858 -**bb:** status to be monitored
722 +* (% style="color:blue" %)**Downlink Payload:**
859 859  
860 -**cc dd:** timeout.
724 +0x(0B F6 1E 01)   ~/~/ Same as AT+18ALARM=-10,30,1
861 861  
726 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
862 862  
863 -**1) AT+TTRIG1 : (PA8 of pin)**
864 864  
865 -(% style="color:blue" %)**AT Command to configure:**
729 +=== 3.3.4 Set Alarm Interval ===
866 866  
867 -* (((
868 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
869 869  
870 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
871 -)))
732 +The shortest time of two Alarm packet. (unit: min)
872 872  
873 -* (((
874 -(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
734 +* (% style="color:blue" %)**AT Command:**
875 875  
736 +AT+ATDC=30  ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
876 876  
877 -
878 -)))
879 879  
880 -(% style="color:blue" %)**Downlink Command to configure:**
739 +* (% style="color:blue" %)**Downlink Payload:**
881 881  
882 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
741 +0x(0D 00 1E)     **~-~-->** Set AT+ATDC=0x 00 1E = 30 minutes
883 883  
884 884  
885 -**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**
744 +=== 3.3.5 Get Alarm settings  （什么FPORT?） ===
886 886  
887 -(% style="color:blue" %)**AT Command to configure:**
888 888  
889 -* (((
890 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
747 +Send a LoRaWAN downlink to ask device send Alarm settings.
891 891  
892 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
893 -)))
749 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
894 894  
895 -* (((
896 -(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
751 +**Example:**
897 897  
753 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
898 898  
899 -
900 -)))
901 901  
902 -(% style="color:blue" %)**Downlink Command to configure:**
756 +**Explain:**
903 903  
904 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
758 +* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
905 905  
906 906  
907 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
761 +=== 3.3.6 Set Interrupt Mode ===
908 908  
909 909  
910 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
764 +Feature, Set Interrupt mode for GPIO_EXIT.
911 911  
912 -(% style="color:blue" %)**AT Command:**
766 +(% style="color:blue" %)**AT Command: AT+INTMOD**
913 913  
914 914  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
915 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
916 -|(% style="width:155px" %)(((
917 -AT+TTRALARM=0
918 -)))|(% style="width:279px" %)(((
919 -disable continuous alarm
920 -)))|(% style="width:84px" %)(((
769 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
770 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
771 +0
921 921  OK
773 +the mode is 0 =Disable Interrupt
922 922  )))
923 -|(% style="width:155px" %)(((
924 -AT+TTRALARM=60
925 -)))|(% style="width:279px" %)(((
926 -The alarm interval is 60 minutes (unit: minutes)
927 -)))|(% style="width:84px" %)(((
928 -OK
929 -)))
775 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
776 +Set Transmit Interval
777 +0. (Disable Interrupt),
778 +~1. (Trigger by rising and falling edge)
779 +2. (Trigger by falling edge)
780 +3. (Trigger by rising edge)
781 +)))|(% style="width:157px" %)OK
930 930  
931 -(% style="color:blue" %)**Downlink Command:**
783 +(% style="color:blue" %)**Downlink Command: 0x06**
932 932  
933 -Example:  0C aa  => AT+TTRALARM= aa
785 +Format: Command Code (0x06) followed by 3 bytes.
934 934  
787 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
935 935  
936 -=== 3.3.5  Count Mod ===
789 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
790 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
937 937  
938 938  
939 -Feature: Manually set the count mode.
940 -
941 -(% style="color:blue" %)**AT Command:**
942 -
943 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
944 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
945 -|(% style="width:155px" %)(((
946 -AT+COUNTMOD=0
947 -)))|(% style="width:277px" %)(((
948 -the count value keeps accumulating mode
949 -)))|(% style="width:86px" %)(((
950 -OK
951 -)))
952 -|(% style="width:155px" %)(((
953 -AT+COUNTMOD=1
954 -)))|(% style="width:277px" %)(((
955 -the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)
956 -)))|(% style="width:86px" %)(((
957 -OK
958 -)))
959 -
960 -(% style="color:blue" %)**Downlink Command:**
961 -
962 -Example:  0B aa  => AT+COUNTMOD = second byte
963 -
964 -
965 -=== 3.3.6  Number of channel of door sensors ===
966 -
967 -
968 -Feature: Set the number of door sensor channels.
969 -
970 -(% style="color:blue" %)**AT Command:**
971 -
972 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
973 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
974 -|(% style="width:155px" %)(((
975 -AT+TTRCHANNEL=1
976 -)))|(% style="width:259px" %)(((
977 -Set as single channel, only use PA8 pin as interrupt pin.
978 -)))|(% style="width:44px" %)(((
979 -OK
980 -)))
981 -|(% style="width:155px" %)(((
982 -AT+TTRCHANNEL=2
983 -)))|(% style="width:259px" %)(((
984 -Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
985 -)))|(% style="width:44px" %)(((
986 -OK
987 -)))
988 -
989 -(% style="color:blue" %)**Downlink Command:**
990 -
991 -Example:  0D aa => AT+TTRCHANNEL = second byte
992 -
993 -
994 -=== 3.3.7  Set Time Sync Mode ===
995 -
996 -
997 -Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
998 -
999 -SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
1000 -
1001 -(% style="color:blue" %)**AT Command:**
1002 -
1003 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1004 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1005 -|(% style="width:155px" %)(((
1006 -AT+SYNCMOD=1
1007 -)))|(% style="width:259px" %)(((
1008 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
1009 -)))|(% style="width:44px" %)(((
1010 -OK
1011 -)))
1012 -|(% style="width:155px" %)(((
1013 -AT+SYNCMOD=1,8
1014 -)))|(% style="width:259px" %)(((
1015 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
1016 -)))|(% style="width:44px" %)(((
1017 -OK
1018 -)))
1019 -|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
1020 -
1021 -(% style="color:blue" %)**Downlink Command:**
1022 -
1023 -0x28 01  ~/~/ Same As AT+SYNCMOD=1
1024 -
1025 -0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
1026 -
1027 -0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
1028 -
1029 -0x28 00  ~/~/ Same As AT+SYNCMOD=0
1030 -
1031 -
1032 -=== 3.3.8  Clear the open door times and the duration of the last open door ===
1033 -
1034 -
1035 -(% style="color:blue" %)**AT Command:**
1036 -
1037 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1038 -|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1039 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1040 -OK
1041 -)))
1042 -
1043 -(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
1044 -
1045 -The sensor will clear the open door times and the duration of the last open door.
1046 -
1047 -
1048 -=== 3.3.9  Set the count value of the number of open door ===
1049 -
1050 -
1051 -(% style="color:blue" %)**AT Command:**
1052 -
1053 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1054 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1055 -|(% style="width:155px" %)(((
1056 -AT+SETCNT=1,100
1057 -)))|(% style="width:259px" %)(((
1058 -Set the open door times of PA8 pin to 100 times.
1059 -)))|(% style="width:44px" %)(((
1060 -OK
1061 -)))
1062 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
1063 -|(% style="width:155px" %)(((
1064 -AT+SETCNT=2,50
1065 -)))|(% style="width:259px" %)(((
1066 -Set the open door times of PA4 pin to 100 times.
1067 -)))|(% style="width:44px" %)(((
1068 -OK
1069 -)))
1070 -
1071 -(% style="color:blue" %)**Downlink Command:**
1072 -
1073 -0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
1074 -
1075 -0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1076 -
1077 -0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1078 -
1079 -
1080 1080  = 4. Battery & Power Consumption =
1081 1081  
1082 1082  
1083 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
796 +D2x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1084 1084  
1085 1085  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1086 1086  
... ... @@ -1088,7 +1088,7 @@
1088 1088  = 5. OTA firmware update =
1089 1089  
1090 1090  
1091 -User can change firmware DS03A-LB to:
804 +User can change firmware S31x-LB to:
1092 1092  
1093 1093  * Change Frequency band/ region.
1094 1094  * Update with new features.
... ... @@ -1096,10 +1096,11 @@
1096 1096  
1097 1097  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1098 1098  
812 +
1099 1099  Methods to Update Firmware:
1100 1100  
1101 -* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1102 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
815 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
816 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1103 1103  
1104 1104  
1105 1105  = 6. FAQ =
... ... @@ -1109,7 +1109,7 @@
1109 1109  = 7. Order Info =
1110 1110  
1111 1111  
1112 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
826 +Part Number: (% style="color:blue" %)**D20-LB-XX  / D22-LB-XX / D23-LB-XX**
1113 1113  
1114 1114  (% style="color:red" %)**XX**(%%): The default frequency band
1115 1115  
... ... @@ -1135,7 +1135,7 @@
1135 1135  
1136 1136  (% style="color:#037691" %)**Package Includes**:
1137 1137  
1138 -* DS03A-LB LoRaWAN Temperature Sensor
852 +* D2x-LB LoRaWAN Temperature Sensor
1139 1139  
1140 1140  (% style="color:#037691" %)**Dimension and weight**:
1141 1141  
... ... @@ -1153,4 +1153,4 @@
1153 1153  
1154 1154  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1155 1155  
1156 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
870 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230426085205-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230516085523-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content
image-20230522092858-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522092934-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522093256-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content
image-20230630155406-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230630155451-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -77.2 KB
Content
image-20230630155527-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -39.2 KB
Content
image-20230630155556-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -38.4 KB
Content
image-20230630155751-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -511.7 KB
Content
image-20230630172740-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230701094042-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content