Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 34.53 >
edited by Xiaoling
on 2023/07/01 15:37
To version < 40.12 >
edited by Xiaoling
on 2024/01/08 17:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DS03A-LB Outdoor LoRaWAN Door Sensor User Manual
1 +DS03A-LB/LS -- Outdoor LoRaWAN Door Sensor User Manual
Content
... ... @@ -1,9 +1,18 @@
1 +(% style="display:none" %) (%%)
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
4 +[[image:image-20240108161155-2.png]]
3 3  
4 4  
5 -**Table of Contents：**
6 6  
8 +
9 +
10 +
11 +
12 +
13 +
14 +**Table of Contents:**
15 +
7 7  {{toc/}}
8 8  
9 9  
... ... @@ -13,41 +13,41 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
25 +== 1.1 What is LoRaWAN Door Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
29 +The Dragino DS03A-LB/LS is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
33 +The LoRa wireless technology used in DS03A-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
37 +The DS03A-LB/LS will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB/LS can count each open event and uplink periodically.
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
41 +DS03A-LB/LS supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
45 +DS03A-LB/LS has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 37  
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
47 +DS03A-LB/LS is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
51 +DS03A-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
55 +DS03A-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery **(%%)or (% style="color:blue" %)**solar powered + li-on battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
59 +Each DS03A-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
... ... @@ -67,9 +67,10 @@
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 -* 8500mAh Battery for long term use
71 71  * Wall Mountable
72 72  * Outdoor Use
81 +* 8500mAh Li/SOCl2 Battery (DS03A-LB)
82 +* Solar panel + 3000mAh Li-on battery (DS03A-LS)
73 73  
74 74  == 1.3 Specification ==
75 75  
... ... @@ -76,14 +76,9 @@
76 76  
77 77  (% style="color:#037691" %)**Common DC Characteristics:**
78 78  
79 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
89 +* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
80 80  * Operating Temperature: -40 ~~ 85°C
81 81  
82 -(% style="color:#037691" %)**Sensor Detect Distance:**
83 -
84 -* Wood Door: 10mm ~~ 30mm
85 -* Iron Door: 30 ~~ 45mm
86 -
87 87  (% style="color:#037691" %)**LoRa Spec:**
88 88  
89 89  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -121,11 +121,10 @@
121 121  == 1.6 Button & LEDs ==
122 122  
123 123  
124 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
125 125  
126 -
127 127  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
128 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
132 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
129 129  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
130 130  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
131 131  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -140,7 +140,7 @@
140 140  == 1.7 BLE connection ==
141 141  
142 142  
143 -DS03A-LB support BLE remote configure.
147 +DS03A-LB/LS support BLE remote configure.
144 144  
145 145  
146 146  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -156,27 +156,40 @@
156 156  
157 157  [[image:image-20230630160843-7.png]]
158 158  
163 +
159 159  == 1.9 Mechanical ==
160 160  
166 +=== 1.9.1 for LB version ===
161 161  
168 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DDS75-LB_LoRaWAN_Distance_Detection_Sensor_User_Manual/WebHome/image-20240105152536-3.png?rev=1.1||alt="image-20240105152536-3.png"]]
169 +
170 +
171 +**Probe Mechanical:**
172 +
162 162  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
163 163  
164 164  
165 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
166 166  
177 +=== 1.9.2 for LS version ===
167 167  
168 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
169 169  
180 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
170 170  
171 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
172 172  
173 173  
174 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
175 175  
185 +== 1.10 Magnet Distance ==
186 +
187 +
188 +* Wood Door: 10mm ~~ 30mm
189 +* Iron Door: 30 ~~ 45mm
190 +
191 += 2. Configure DS03A-LB/LS to connect to LoRaWAN network =
192 +
176 176  == 2.1 How it works ==
177 177  
178 178  
179 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
196 +The DS03A-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
180 180  
181 181  
182 182  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -189,9 +189,9 @@
189 189  [[image:image-20230522092858-1.png||height="391" width="874"]]
190 190  
191 191  
192 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
209 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB/LS.
193 193  
194 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
211 +Each DS03A-LB/LS is shipped with a sticker with the default device EUI as below:
195 195  
196 196  [[image:image-20230426085205-1.png||height="238" width="512"]]
197 197  
... ... @@ -221,10 +221,10 @@
221 221  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
222 222  
223 223  
224 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
241 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB/LS
225 225  
226 226  
227 -Press the button for 5 seconds to activate the DS03A-LB.
244 +Press the button for 5 seconds to activate the DS03A-LB/LS.
228 228  
229 229  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
230 230  
... ... @@ -236,11 +236,13 @@
236 236  === 2.3.1 Device Status, FPORT~=5 ===
237 237  
238 238  
239 -Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
256 +Include device configure status. Once DS03A-LB/LS Joined the network, it will uplink this message to the server. After that, DS03A-LB/LS will uplink Device Status every 12 hours.
240 240  
241 -The Payload format is as below.
258 +Users can also use the downlink command**(0x26 01)** to ask DS03A-LB/LS to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
242 242  
243 243  
261 +The Payload format is as below.
262 +
244 244  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
245 245  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
246 246  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
... ... @@ -251,7 +251,7 @@
251 251  [[image:image-20230630155406-1.png||height="190" width="873"]]
252 252  
253 253  
254 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB/LS, this value is 0x1B
255 255  
256 256  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
257 257  
... ... @@ -307,7 +307,7 @@
307 307  === 2.3.2  Sensor Configuration, FPORT~=4 ===
308 308  
309 309  
310 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
329 +DS03A-LB/LS will only send this command after getting the downlink command **(0x26 02)** from the server.
311 311  
312 312  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
313 313  |(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
... ... @@ -322,6 +322,11 @@
322 322  Alarm interval(unit: min)
323 323  )))
324 324  
344 +Example parse in TTNv3
345 +
346 +[[image:image-20230630155527-3.png||height="146" width="902"]]
347 +
348 +
325 325  * (((
326 326  (% style="color:blue" %)**TDC: (default: 0x001C20)**
327 327  )))
... ... @@ -333,9 +333,9 @@
333 333  (% style="color:blue" %)**Disalarm: (default: 0)**
334 334  )))
335 335  
336 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
360 + **If Disalarm = 1**, DS03A-LB/LS will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
337 337  
338 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
362 + **If Disalarm = 0**, DS03A-LB/LS will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
339 339  
340 340  
341 341  (% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
... ... @@ -347,7 +347,6 @@
347 347  
348 348  Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
349 349  
350 -[[image:image-20230630155527-3.png||height="146" width="902"]]
351 351  
352 352  
353 353  * (((
... ... @@ -360,7 +360,7 @@
360 360  === 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
361 361  
362 362  
363 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
386 +DS03A-LB/LS will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB/LS will send uplinks when:
364 364  
365 365  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
366 366  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
... ... @@ -368,7 +368,7 @@
368 368  **1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
369 369  
370 370  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
371 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
394 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
372 372  |(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
373 373  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
374 374  Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
... ... @@ -380,7 +380,7 @@
380 380  
381 381  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
382 382  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
383 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
406 +|(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
384 384  Count mod
385 385  )))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
386 386  Alarm 0: No Alarm; 1: Alarm
... ... @@ -395,9 +395,9 @@
395 395  (% style="color:blue" %)**Count mod:Default=0**
396 396  )))
397 397  
398 -MOD=0 ~-~-> Uplink total open door times since factory
421 +0: Uplink total open door times since factory
399 399  
400 -MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
423 +1: Uplink total open door times since last FPORT=2 uplink.
401 401  
402 402  
403 403  * (% style="color:blue" %)**TDC flag**
... ... @@ -448,7 +448,7 @@
448 448  (% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
449 449  
450 450  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
451 -|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
474 +|=(% colspan="8" style="background-color:#4F81BD;color:white; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
452 452  |(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
453 453  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
454 454  Status1 & Alarm1
... ... @@ -462,7 +462,7 @@
462 462  
463 463  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
464 464  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
465 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
488 +|(% style="width:76px" %)Value|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
466 466  Count mod
467 467  )))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
468 468  Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
... ... @@ -474,7 +474,7 @@
474 474  
475 475  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
476 476  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
477 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
500 +|(% style="width:76px" %)Value|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
478 478  Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
479 479  )))|(% style="width:181px" %)(((
480 480  Status2 0: Close; 1: Open (PA4 of pin)
... ... @@ -484,12 +484,12 @@
484 484  
485 485  
486 486  * (((
487 -(% style="color:blue" %)Count mod:Default=0
510 +(% style="color:blue" %)**Count mod:Default=0**
488 488  )))
489 489  
490 -MOD=0 ~-~-> Uplink total open door times since factory
513 +0: Uplink total open door times since factory
491 491  
492 -MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
515 +1: Uplink total open door times since last FPORT=2 uplink.
493 493  
494 494  
495 495  * (% style="color:blue" %)**TDC flag**
... ... @@ -536,12 +536,12 @@
536 536  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
537 537  
538 538  
539 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
562 +DS03A-LB/LS stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
540 540  
541 541  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
542 542  
543 543  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
544 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
567 +|=(% colspan="5" style="background-color:#4F81BD;color:white;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
545 545  |(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
546 546  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
547 547  Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
... ... @@ -553,7 +553,7 @@
553 553  
554 554  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
555 555  |(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
556 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
579 +|(% style="width:76px" %)Value|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
557 557  Count mod
558 558  )))|(% style="width:95px" %)(((
559 559  TDC flag 0:No; 1:Yes
... ... @@ -564,7 +564,7 @@
564 564  )))
565 565  
566 566  * (((
567 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
590 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB/LS will send max bytes according to the current DR and Frequency bands.
568 568  )))
569 569  
570 570  For example, in the US915 band, the max payload for different DR is:
... ... @@ -636,7 +636,7 @@
636 636  == 2.5 Datalog Feature ==
637 637  
638 638  
639 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
662 +(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB/LS will store the reading for future retrieving purposes.
640 640  
641 641  (% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
642 642  
... ... @@ -644,20 +644,17 @@
644 644  === 2.5.1 Ways to get datalog via LoRaWAN ===
645 645  
646 646  
647 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
670 +Set PNACKMD=1, DS03A-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network, DS03A-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
648 648  
649 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
650 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
672 +* a) DS03A-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
673 +* b) DS03A-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB/LS gets a ACK, DS03A-LB/LS will consider there is a network connection and resend all NONE-ACK Message.
651 651  
652 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
653 653  
654 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
655 655  
656 -
657 657  === 2.5.2 Unix TimeStamp ===
658 658  
659 659  
660 -DS03A-LB uses Unix TimeStamp format based on
680 +DS03A-LB/LS uses Unix TimeStamp format based on
661 661  
662 662  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
663 663  
... ... @@ -675,7 +675,7 @@
675 675  
676 676  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
677 677  
678 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
698 +Once DS03A-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB/LS. If DS03A-LB/LS fails to get the time from the server, DS03A-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
679 679  
680 680  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
681 681  
... ... @@ -688,7 +688,7 @@
688 688  
689 689  (% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
690 690  
691 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
711 +(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB/LS in Datacake.**
692 692  
693 693  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
694 694  
... ... @@ -723,7 +723,7 @@
723 723  == 2.7 Frequency Plans ==
724 724  
725 725  
726 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
746 +The DS03A-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
727 727  
728 728  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
729 729  
... ... @@ -734,12 +734,12 @@
734 734  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
735 735  
736 736  
737 -= 3. Configure DS03A-LB =
757 += 3. Configure DS03A-LB/LS =
738 738  
739 739  == 3.1 Configure Methods: ==
740 740  
741 741  
742 -DS03A-LB supports below configure method:
762 +DS03A-LB/LS supports below configure method:
743 743  
744 744  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
745 745  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -758,10 +758,10 @@
758 758  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
759 759  
760 760  
761 -== 3.3 Commands special design for DS03A-LB ==
781 +== 3.3 Commands special design for DS03A-LB/LS ==
762 762  
763 763  
764 -These commands only valid for DS03A-LB, as below:
784 +These commands only valid for DS03A-LB/LS, as below:
765 765  
766 766  
767 767  === 3.3.1  Set Transmit Interval Time ===
... ... @@ -792,9 +792,39 @@
792 792  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
793 793  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
794 794  
795 -=== 3.3.2  Enable / Disable Alarm ===
815 +=== 3.3.2  Set Power Output Duration ===
796 796  
797 797  
818 +Control the output duration 5V . Before each sampling, device will
819 +
820 +~1. first enable the power output to external sensor,
821 +
822 +2. keep it on as per duration, read sensor value and construct uplink payload
823 +
824 +3. final, close the power output.
825 +
826 +(% style="color:blue" %)**AT Command: AT+5VT**
827 +
828 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
829 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 204px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 149px;" %)**Response**
830 +|(% style="width:156px" %)AT+5VT=?|(% style="width:204px" %)Show 5V open time.|(% style="width:149px" %)0 (default)
831 +OK
832 +|(% style="width:156px" %)AT+5VT=500|(% style="width:204px" %)Close after a delay of 500 milliseconds.|(% style="width:149px" %)(((
833 +OK
834 +
835 +)))
836 +
837 +(% style="color:blue" %)**Downlink Command: 0x07**(%%)
838 +Format: Command Code (0x07) followed by 2 bytes.
839 +
840 +The first and second bytes are the time to turn on.
841 +
842 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
843 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
844 +
845 +=== 3.3.3  Enable / Disable Alarm ===
846 +
847 +
798 798  Feature: Enable/Disable Alarm for open/close event. Default value 0.
799 799  
800 800  (% style="color:blue" %)**AT Command: **
... ... @@ -811,12 +811,11 @@
811 811  0xA7 00  ~/~/ Same As AT+DISALARM=0
812 812  
813 813  
814 -=== 3.3.3  Alarm Base on Timeout ===
864 +=== 3.3.4  Alarm Base on Timeout ===
815 815  
816 816  
817 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
867 +DS03A-LB/LS can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
818 818  
819 -
820 820  * (((
821 821  (% style="color:blue" %)**Keep Status: Status to be monitor**
822 822  )))
... ... @@ -852,14 +852,14 @@
852 852  **cc dd:** timeout.
853 853  
854 854  
855 -**1) AT+TTRIG1:(PA8 of pin)**
904 +**1) AT+TTRIG1 : (PA8 of pin)**
856 856  
857 857  (% style="color:blue" %)**AT Command to configure:**
858 858  
859 859  * (((
860 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
909 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
861 861  
862 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
911 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
863 863  )))
864 864  
865 865  * (((
... ... @@ -874,14 +874,14 @@
874 874  If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
875 875  
876 876  
877 -**2) AT+TTRIG2:(PA4 of pin,need to use AT+TTRCHANNEL=2)**
926 +**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**
878 878  
879 879  (% style="color:blue" %)**AT Command to configure:**
880 880  
881 881  * (((
882 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
931 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
883 883  
884 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
933 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB/LS will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
885 885  )))
886 886  
887 887  * (((
... ... @@ -896,7 +896,7 @@
896 896  If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
897 897  
898 898  
899 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
948 +=== 3.3.5  TTRIG1 & TTRIG2 timeout status alarm ===
900 900  
901 901  
902 902  It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
... ... @@ -904,7 +904,7 @@
904 904  (% style="color:blue" %)**AT Command:**
905 905  
906 906  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
907 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
956 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 279px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 76px;background-color:#4F81BD;color:white" %)**Response**
908 908  |(% style="width:155px" %)(((
909 909  AT+TTRALARM=0
910 910  )))|(% style="width:279px" %)(((
... ... @@ -925,7 +925,7 @@
925 925  Example:  0C aa  => AT+TTRALARM= aa
926 926  
927 927  
928 -=== 3.3.5  Count Mod ===
977 +=== 3.3.6  Count Mod ===
929 929  
930 930  
931 931  Feature: Manually set the count mode.
... ... @@ -933,7 +933,7 @@
933 933  (% style="color:blue" %)**AT Command:**
934 934  
935 935  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
936 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
985 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 275px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 86px;background-color:#4F81BD;color:white" %)**Response**
937 937  |(% style="width:155px" %)(((
938 938  AT+COUNTMOD=0
939 939  )))|(% style="width:277px" %)(((
... ... @@ -954,7 +954,7 @@
954 954  Example:  0B aa  => AT+COUNTMOD = second byte
955 955  
956 956  
957 -=== 3.3.6  Number of channel of door sensors ===
1006 +=== 3.3.7  Number of channel of door sensors ===
958 958  
959 959  
960 960  Feature: Set the number of door sensor channels.
... ... @@ -962,7 +962,7 @@
962 962  (% style="color:blue" %)**AT Command:**
963 963  
964 964  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
965 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1014 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
966 966  |(% style="width:155px" %)(((
967 967  AT+TTRCHANNEL=1
968 968  )))|(% style="width:259px" %)(((
... ... @@ -983,7 +983,7 @@
983 983  Example:  0D aa => AT+TTRCHANNEL = second byte
984 984  
985 985  
986 -=== 3.3.7  Set Time Sync Mode ===
1035 +=== 3.3.8  Set Time Sync Mode ===
987 987  
988 988  
989 989  Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
... ... @@ -993,7 +993,7 @@
993 993  (% style="color:blue" %)**AT Command:**
994 994  
995 995  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
996 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1045 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
997 997  |(% style="width:155px" %)(((
998 998  AT+SYNCMOD=1
999 999  )))|(% style="width:259px" %)(((
... ... @@ -1021,13 +1021,13 @@
1021 1021  0x28 00  ~/~/ Same As AT+SYNCMOD=0
1022 1022  
1023 1023  
1024 -=== 3.3.8  Clear the open door times and the duration of the last open door ===
1073 +=== 3.3.9  Clear the open door times and the duration of the last open door ===
1025 1025  
1026 1026  
1027 1027  (% style="color:blue" %)**AT Command:**
1028 1028  
1029 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1030 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1078 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1079 +|=(% style="width: 163px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 290px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1031 1031  |(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1032 1032  OK
1033 1033  )))
... ... @@ -1037,13 +1037,13 @@
1037 1037  The sensor will clear the open door times and the duration of the last open door.
1038 1038  
1039 1039  
1040 -=== 3.3.9  Set the count value of the number of open door ===
1089 +=== 3.3.10  Set the count value of the number of open door ===
1041 1041  
1042 1042  
1043 1043  (% style="color:blue" %)**AT Command:**
1044 1044  
1045 1045  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1046 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1095 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 288px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 57px;background-color:#4F81BD;color:white" %)**Response**
1047 1047  |(% style="width:155px" %)(((
1048 1048  AT+SETCNT=1,100
1049 1049  )))|(% style="width:259px" %)(((
... ... @@ -1072,7 +1072,7 @@
1072 1072  = 4. Battery & Power Consumption =
1073 1073  
1074 1074  
1075 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1124 +DS03A-LB use ER26500 + SPC1520 battery pack and DS03A-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1076 1076  
1077 1077  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1078 1078  
... ... @@ -1080,7 +1080,7 @@
1080 1080  = 5. OTA firmware update =
1081 1081  
1082 1082  
1083 -User can change firmware DS03A-LB to:
1132 +User can change firmware DS03A-LB/LS to:
1084 1084  
1085 1085  * Change Frequency band/ region.
1086 1086  * Update with new features.
... ... @@ -1100,7 +1100,7 @@
1100 1100  = 7. Order Info =
1101 1101  
1102 1102  
1103 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
1152 +**Part Number: (% style="color:blue" %)DS03A-LB-XX (%%)or (% style="color:blue" %)DS03A-LS-XX(%%)**
1104 1104  
1105 1105  (% style="color:red" %)**XX**(%%): The default frequency band
1106 1106  
... ... @@ -1125,7 +1125,7 @@
1125 1125  
1126 1126  (% style="color:#037691" %)**Package Includes**:
1127 1127  
1128 -* DS03A-LB LoRaWAN Temperature Sensor
1177 +* DS03A-LB or DS03A-LS LoRaWAN Temperature Sensor
1129 1129  
1130 1130  (% style="color:#037691" %)**Dimension and weight**:
1131 1131  
image-20240108160443-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +500.2 KB
Content
image-20240108161155-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +265.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0