Skip to Content
Last modified by Mengting Qiu on 2025/07/03 16:36
From version 34.5
edited by Xiaoling
on 2023/07/01 14:18
Change comment: There is no comment for this version
To version 1.1
edited by Edwin Chen
on 2023/04/22 23:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
1 +
3 3  
4 4  
5 5  **Table of Contents：**
... ... @@ -13,64 +13,57 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
15 +== 1.1 What is D2x-LB LoRaWAN Temperature Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
19 +The Dragino D2x-LB is a (% style="color:blue" %)**LoRaWAN Temperature Sensor**(%%) for Internet of Things solution. D2x-LB has 1 ~~ 3 temperature probes. D2x-LB will convert the Temperature reading to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
23 +The LoRa wireless technology used in D2x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
27 +The temperature sensor used in D2x-LB can (% style="color:blue" %)**measure -55°C ~~ 125°C with accuracy ±0.5°C (max ±2.0 °C)**(%%).
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
31 +D2x-LB supports (% style="color:blue" %)**temperature alarm feature,**(%%) user can set temperature alarm for instant notice. D2x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
35 +D2x-LB has max 3 probes which measure maximum 3 temperature points.
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
39 +D2x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
43 +D2x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
47 +Each D2x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
54 -[[image:image-20230522092934-2.png||height="346" width="774"]]
55 -
56 -
57 57  == 1.2 ​Features ==
58 58  
59 -
60 60  * LoRaWAN 1.0.3 Class A
61 61  * Ultra-low power consumption
55 +* 1 ~~ 3 External Temperature Probes
56 +* Measure range -55°C ~~ 125°C
57 +* Temperature alarm
62 62  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
63 -* Door Open/Close detect
64 -* Door open/close statistics
65 -* Datalog Feature, Open Alarm Feature
66 66  * Support Bluetooth v5.1 and LoRaWAN remote configure
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 70  * 8500mAh Battery for long term use
71 -* Wall Mountable
72 -* Outdoor Use
73 73  
65 +
74 74  == 1.3 Specification ==
75 75  
76 76  
... ... @@ -79,10 +79,11 @@
79 79  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
80 80  * Operating Temperature: -40 ~~ 85°C
81 81  
82 -(% style="color:#037691" %)**Sensor Detect Distance:**
74 +(% style="color:#037691" %)**Temperature Sensor:**
83 83  
84 -* Wood Door: 10mm ~~ 30mm
85 -* Iron Door: 30 ~~ 45mm
76 +* Dallas DS18B20
77 +* Range: -55 to + 125°C
78 +* Accuracy ±0.5°C (max ±2.0 °C).
86 86  
87 87  (% style="color:#037691" %)**LoRa Spec:**
88 88  
... ... @@ -104,24 +104,19 @@
104 104  * Sleep Mode: 5uA @ 3.3v
105 105  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
106 106  
107 -== 1.4 Applications ==
108 108  
101 +== 1.4 Sleep mode and working mode ==
109 109  
110 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]
111 111  
112 -
113 -== 1.5 Sleep mode and working mode ==
114 -
115 -
116 116  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
117 117  
118 118  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
119 119  
120 120  
121 -== 1.6 Button & LEDs ==
109 +== 1.5 Button & LEDs ==
122 122  
123 123  
124 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
112 +[[image:1675071855856-879.png]]
125 125  
126 126  
127 127  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
... ... @@ -135,14 +135,15 @@
135 135  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
136 136  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
137 137  )))
138 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
126 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means D2x-LB is in Deep Sleep Mode.
139 139  
140 -== 1.7 BLE connection ==
141 141  
129 +== 1.6 BLE connection ==
142 142  
143 -DS03A-LB support BLE remote configure.
144 144  
132 +D2x-LB support BLE remote configure.
145 145  
134 +
146 146  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
147 147  
148 148  * Press button to send an uplink
... ... @@ -152,82 +152,112 @@
152 152  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
153 153  
154 154  
155 -== 1.8 Pin Definitions ==
144 +== 1.7  Hardware Variant ==
156 156  
157 -[[image:image-20230630160843-7.png]]
158 158  
159 -== 1.9 Mechanical ==
147 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
148 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
149 +|(% style="width:102px" %)D20-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
150 +1 x DS28B20 Probe
160 160  
152 +Cable Length : 2 meters
161 161  
162 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
154 +
155 +)))
156 +|(% style="width:102px" %)D22-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 +2 x DS28B20 Probes
163 163  
159 +Cable lengths total 1.5meters per probe
164 164  
165 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
161 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K21G-210811.pdf]]
162 +)))
163 +|(% style="width:102px" %)(((
164 +(((
165 +D23-LB
166 +)))
166 166  
168 +(((
169 +
170 +)))
171 +)))|(% style="width:190px" %) |(% style="width:297px" %)(((
172 +3 x DS28B20 Probes
167 167  
168 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
174 +Cable lengths total 1.5meters per probe
169 169  
176 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K31G-210811.pdf]]
177 +)))
170 170  
171 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
179 +(% style="display:none" %)
172 172  
173 173  
174 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
175 175  
183 +== 1.8 Mechanical ==
184 +
185 +
186 +[[image:1675143884058-338.png]]
187 +
188 +
189 +[[image:1675143899218-599.png]]
190 +
191 +
192 +[[image:1675143909447-639.png]]
193 +
194 +
195 += 2. Configure D2x-LB to connect to LoRaWAN network =
196 +
176 176  == 2.1 How it works ==
177 177  
178 178  
179 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
200 +The D2x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the D2x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
180 180  
181 181  
182 182  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
183 183  
184 184  
185 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
206 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
186 186  
187 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
188 188  
189 -[[image:image-20230522092858-1.png||height="391" width="874"]]
209 +The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
190 190  
191 191  
192 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
212 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from D2x-LB.
193 193  
194 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
214 +Each D2x-LB is shipped with a sticker with the default device EUI as below:
195 195  
196 -[[image:image-20230426085205-1.png||height="238" width="512"]]
216 +[[image:image-20230131134744-2.jpeg]]
197 197  
198 198  
219 +
199 199  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
200 200  
201 -(% style="display:none" %) (%%)
202 202  
203 203  (% style="color:blue" %)**Register the device**
204 204  
225 +[[image:1675144099263-405.png]]
205 205  
206 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)
207 207  
208 -
209 209  (% style="color:blue" %)**Add APP EUI and DEV EUI**
210 210  
211 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]
230 +[[image:1675144117571-832.png]]
212 212  
213 213  
214 214  (% style="color:blue" %)**Add APP EUI in the application**
215 215  
216 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]
217 217  
236 +[[image:1675144143021-195.png]]
218 218  
238 +
219 219  (% style="color:blue" %)**Add APP KEY**
220 220  
221 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
241 +[[image:1675144157838-392.png]]
222 222  
243 +(% style="color:blue" %)**Step 2:**(%%) Activate on D2x-LB
223 223  
224 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
225 225  
246 +Press the button for 5 seconds to activate the D2x-LB.
226 226  
227 -Press the button for 5 seconds to activate the DS03A-LB.
248 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
228 228  
229 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
230 -
231 231  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
232 232  
233 233  
... ... @@ -236,7 +236,7 @@
236 236  === 2.3.1 Device Status, FPORT~=5 ===
237 237  
238 238  
239 -Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
258 +Users can use the downlink command(**0x26 01**) to ask D2x-LB to send device configure detail, include device configure status. D2x-LB will uplink a payload via FPort=5 to server.
240 240  
241 241  The Payload format is as below.
242 242  
... ... @@ -248,42 +248,42 @@
248 248  
249 249  Example parse in TTNv3
250 250  
251 -[[image:image-20230630155406-1.png||height="190" width="873"]]
270 +[[image:image-20230415153147-2.png||height="220" width="1120"]]
252 252  
253 253  
254 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For D2x-LB, this value is 0x19
255 255  
256 256  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
257 257  
258 258  (% style="color:#037691" %)**Frequency Band**:
259 259  
260 -0x01: EU868
279 +*0x01: EU868
261 261  
262 -0x02: US915
281 +*0x02: US915
263 263  
264 -0x03: IN865
283 +*0x03: IN865
265 265  
266 -0x04: AU915
285 +*0x04: AU915
267 267  
268 -0x05: KZ865
287 +*0x05: KZ865
269 269  
270 -0x06: RU864
289 +*0x06: RU864
271 271  
272 -0x07: AS923
291 +*0x07: AS923
273 273  
274 -0x08: AS923-1
293 +*0x08: AS923-1
275 275  
276 -0x09: AS923-2
295 +*0x09: AS923-2
277 277  
278 -0x0a: AS923-3
297 +*0x0a: AS923-3
279 279  
280 -0x0b: CN470
299 +*0x0b: CN470
281 281  
282 -0x0c: EU433
301 +*0x0c: EU433
283 283  
284 -0x0d: KR920
303 +*0x0d: KR920
285 285  
286 -0x0e: MA869
305 +*0x0e: MA869
287 287  
288 288  
289 289  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -304,453 +304,282 @@
304 304  Ex2: 0x0B49 = 2889mV
305 305  
306 306  
307 -=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
326 +=== 2.3.2  Sensor Data. FPORT~=2 ===
308 308  
309 309  
310 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
329 +D2x-LB will uplink below payload via FPORT=2 after Joined LoRaWAN Network.
311 311  
312 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
313 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
314 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:99px" %)**2**|(% style="width:87px" %)**1**|(% style="width:97px" %)**2**|(% style="width:98px" %)**1**
315 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
316 -Keep status1)))|(% style="width:99px" %)(((
317 -Keep time1(unit: sec)
318 -)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
319 -Keep time2(unit: sec)
320 -)))|(% style="width:98px" %)(((
321 -Alarm interval(unit: min)
322 -)))
331 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
332 +|=(% style="width: 62.5px;background-color:#D9E2F3" %)(((
333 +**Size(bytes)**
334 +)))|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 120px;background-color:#D9E2F3" %)2|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 65px;background-color:#D9E2F3" %)1|=(% style="width: 65px;background-color:#D9E2F3" %)**2**|=(% style="width: 65px;background-color:#D9E2F3" %)2
335 +|(% style="width:65px" %)**Value**|(((
336 +[[Battery>>||anchor="HBattery:"]]
337 +)))|(% style="width:91px" %)(((
338 +[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]
339 +)))|(% style="width:61px" %)(((
340 +ignore
341 +)))|(% style="width:91px" %)(((
342 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
343 +)))|(% style="width:99px" %)(((
344 +[[Temp_White>>||anchor="HTemperatureWhite:"]]
345 +)))|(% style="width:97px" %)(((
346 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
323 323  
324 -* (((
325 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
348 +
326 326  )))
327 327  
328 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
351 +**Payload per each model.**
329 329  
353 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220916152530-2.png?rev=1.1||alt="image-20220916152530-2.png" height="240" width="901"]]
330 330  
331 -* (((
332 -(% style="color:blue" %)**Disalarm: (default: 0)**
333 -)))
334 334  
335 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
356 +[[image:image-20230415154139-3.png||height="215" width="1179"]]
336 336  
337 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
338 338  
359 +==== (% style="color:#4472c4" %)**Decode corresponding probe color：**(%%) ====
339 339  
340 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
361 +**D20:**
341 341  
363 +Red <~-~-> C1
342 342  
343 -* (((
344 -(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
345 -)))
365 +**D22:**
346 346  
347 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
367 +White <~-~-> C1 Red <~-~-> C2
348 348  
349 -[[image:image-20230630155527-3.png||height="146" width="902"]]
369 +**D23:**
350 350  
371 +White <~-~->C1 Red <~-~-> C2 Black <~-~-> C3
351 351  
352 -* (((
353 -(% style="color:blue" %)**Alarm interval(default: 0)**
354 -)))
355 355  
356 -When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
357 357  
375 +==== (% style="color:#4472c4" %)**Battery:**(%%) ====
358 358  
359 -=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
377 +Sensor Battery Level.
360 360  
379 +Ex1: 0x0B45 = 2885mV
361 361  
362 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
381 +Ex2: 0x0B49 = 2889mV
363 363  
364 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
365 -* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
366 366  
367 -1)When **AT+TTRCHANNEL=1**, Uplink Payload totals **11 bytes**. (**Default mode**)
368 368  
369 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
370 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
371 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
372 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
373 -Status
385 +==== (% style="color:#4472c4" %)**Temperature RED or Temperature White :**(%%) ====
374 374  
375 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
376 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
377 -The last door open duration (unit: sec)
378 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
387 +**This point to the Red probe in D20-LB or the probe of D22-LB/D23-LB White**
379 379  
380 -**Status & Alarm:**
389 +**Example**:
381 381  
382 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:668px" %)
383 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:148px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:131px" %)**bit0**
384 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
385 -Count mod
386 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
387 -Alarm 0: No Alarm;
391 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
388 388  
389 -1: Alarm
390 -)))|(% style="width:131px" %)(((
391 -Status 0: Close;
393 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
392 392  
393 -1: Open
394 -)))
395 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
395 395  
396 -[[image:image-20230630155451-2.png||height="246" width="928"]]
397 397  
398 398  
399 -* (((
400 -(% style="color:blue" %)**Count mod:Default=0**
401 -)))
399 +==== (% style="color:#4472c4" %)**Temperature White:**(%%) ====
402 402  
403 -MOD=0 ~-~-> Uplink total open door times since factory
404 404  
405 -MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
402 +**This point to the Red probe in D22-LB/D23-LB**
406 406  
407 407  
408 -* (% style="color:blue" %)**TDC flag**
405 +**Example**:
409 409  
410 -When the flag is 1, it means sending packets at normal time intervals.
407 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
411 411  
412 -Otherwise, it is a packet sent at non-TDC time.
409 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
413 413  
411 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
414 414  
415 -* (((
416 -(% style="color:#0000ff" %)**Alarm**
417 -)))
418 418  
419 -See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
420 420  
415 +==== (% style="color:#4472c4" %)**Temperature Black:**(%%) ====
421 421  
422 -* (((
423 -(% style="color:blue" %)**Status**
424 -)))
425 425  
426 -This bit is 1 when the door sensor is open and 0 when it is close.
418 +**This point to the BLACK probe in D23-LB**
427 427  
428 428  
429 -* (((
430 -(% style="color:blue" %)**Total open door events**
431 -)))
421 +**Example**:
432 432  
433 -Total pulse/counting base on open door.
423 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
434 434  
435 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
425 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
436 436  
427 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
437 437  
438 -* (((
439 -(% style="color:blue" %)**The last door open duration**
440 -)))
441 441  
442 -Door sensor last open duration.
443 443  
444 -Unit: sec.
431 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
445 445  
446 -[[image:image-20230701094042-1.png||height="154" width="763"]]
447 447  
434 +**Example:**
448 448  
449 -2)When **AT+TTRCHANNEL=2**, Uplink Payload totals **18 bytes**.
436 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
450 450  
451 -(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
438 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
452 452  
453 -(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
454 454  
455 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
456 -|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**
457 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
458 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
459 -Status1
441 +== 2.4 Payload Decoder file ==
460 460  
461 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
462 -)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
463 -The last door open duration1 (unit: sec)
464 -)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
465 -Status2
466 466  
467 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
468 -)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
469 -
470 -**Status1 & Alarm1:**
471 -
472 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:775px" %)
473 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:99px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:103px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:216px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**
474 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
475 -Count mod
476 -)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
477 -Alarm1 0: No Alarm; 1: Alarm
478 -
479 -(PA8 of pin)
480 -)))|(% style="width:181px" %)(((
481 -Status1 0: Close; 1:Open
482 -
483 -(PA8 of pin)
444 +(((
445 +In TTN, use can add a custom payload so it shows friendly. 
484 484  )))
485 485  
486 -**Status2 & Alarm2:**
487 -
488 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:591px" %)
489 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:219px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**
490 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
491 -Alarm2 0: No Alarm; 1: Alarm
492 -
493 -(PA4 of pin)
494 -)))|(% style="width:181px" %)(((
495 -Status2 0: Close,;1:Open
496 -
497 -(PA4 of pin)
448 +(((
449 +In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
498 498  )))
499 499  
500 -[[image:image-20230630155908-6.png||height="295" width="927"]]
501 501  
453 +== 2.5 Datalog Feature ==
502 502  
503 -* (((
504 -(% id="cke_bm_695345S" style="color:blue; display:none" %)** **(% style="color:blue" %)**Count mod:Default=0**
505 -)))
506 506  
507 -MOD=0 ~-~-> Uplink total open door times since factory
456 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, D2x-LB will store the reading for future retrieving purposes.
508 508  
509 -MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
510 510  
459 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
511 511  
512 -* (% style="color:blue" %)**TDC flag**
513 513  
514 -When the flag is 1, it means sending packets at normal time intervals.
462 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], D2x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,D2x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
515 515  
516 -Otherwise, it is a packet sent at non-TDC time.
464 +* a) D2x-LB will do an ACK check for data records sending to make sure every data arrive server.
465 +* b) D2x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but D2x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if D2x-LB gets a ACK, D2x-LB will consider there is a network connection and resend all NONE-ACK Message.
517 517  
467 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
518 518  
519 -* (((
520 -(% style="color:#0000ff" %)**Alarm1 or Alarm2**
521 -)))
469 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
522 522  
523 -See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
471 +=== 2.5.2 Unix TimeStamp ===
524 524  
525 525  
526 -* (((
527 -(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
528 -)))
474 +D2x-LB uses Unix TimeStamp format based on
529 529  
530 -This bit is 1 when the door sensor is open and 0 when it is close.
476 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
531 531  
478 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
532 532  
533 -* (((
534 -(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
535 -)))
480 +Below is the converter example
536 536  
537 -Total pulse/counting base on open door.
482 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
538 538  
539 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
484 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
540 540  
541 541  
542 -* (((
543 -(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
544 -)))
487 +=== 2.5.3 Set Device Time ===
545 545  
546 -Door sensor last open duration.
547 547  
548 -Unit: sec.
490 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
549 549  
550 -[[image:image-20230701094042-1.png||height="154" width="763"]]
492 +Once D2x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to D2x-LB. If D2x-LB fails to get the time from the server, D2x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
551 551  
494 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
552 552  
553 -=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
554 554  
497 +=== 2.5.4 Datalog Uplink payload  (FPORT~=3) ===
555 555  
556 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
557 557  
558 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
500 +The Datalog poll reply uplink will use below payload format.
559 559  
560 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
561 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
562 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
563 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
564 -Status
502 +**Retrieval data payload:**
565 565  
566 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
567 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
568 -The last door open duration (unit: sec)
569 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
504 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
505 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
506 +**Size(bytes)**
507 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 115px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 80px; background-color: rgb(217, 226, 243);" %)**4**
508 +|(% style="width:93px" %)**Value**|(% style="width:54px" %)(((
509 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
510 +)))|(% style="width:54px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:87px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:104px" %)Poll message flag & Ext|(% style="width:55px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
570 570  
571 -**Status & Alarm:**
512 +**Poll message flag & Ext:**
572 572  
573 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
574 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
575 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
576 -Count mod
577 -)))|(% style="width:95px" %)(((
578 -TDC flag 0:No;
514 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
579 579  
580 -1:Yes
581 -)))|(% style="width:116px" %)(((
582 -Alarm
516 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
583 583  
584 -0: No Alarm;
518 +**Poll Message Flag**: 1: This message is a poll message reply.
585 585  
586 -1: Alarm
587 -)))|(% style="width:112px" %)(((
588 -Status 0:Close;
520 +* Poll Message Flag is set to 1.
589 589  
590 -1: Open
591 -)))
522 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
592 592  
593 -* (((
594 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
595 -)))
524 +For example, in US915 band, the max payload for different DR is:
596 596  
597 -For example, in the US915 band, the max payload for different DR is:
526 +**a) DR0:** max is 11 bytes so one entry of data
598 598  
599 -(((
600 -**~1. DR0**: max is 11 bytes so one entry of data
601 -)))
528 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
602 602  
603 -(((
604 -**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
605 -)))
530 +**c) DR2:** total payload includes 11 entries of data
606 606  
607 -(((
608 -**3. DR2**: total payload includes 11 entries of data
609 -)))
532 +**d) DR3: **total payload includes 22 entries of data.
610 610  
611 -(((
612 -**4. DR3**: total payload includes 22 entries of data.
613 -)))
534 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
614 614  
615 -If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
616 616  
617 -[[image:image-20230630155556-4.png||height="146" width="938"]]
537 +**Example:**
618 618  
619 -**Downlink:**
539 +If D2x-LB has below data inside Flash:
620 620  
621 -0x31 64 9E 7D 34 64 9E 7E 9C 05
541 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
622 622  
543 +If user sends below downlink command: 3160065F9760066DA705
623 623  
624 -**Uplink:**
545 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
625 625  
626 -45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
547 + Stop time: 60066DA7= time 21/1/19 05:27:03
627 627  
628 628  
629 -**Parsed Value:**
550 +**D2x-LB will uplink this payload.**
630 630  
631 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
552 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
632 632  
554 +(((
555 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
556 +)))
633 633  
634 -[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
558 +(((
559 +Where the first 11 bytes is for the first entry:
560 +)))
635 635  
636 -[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
562 +(((
563 +7FFF089801464160065F97
564 +)))
637 637  
638 -[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
566 +(((
567 +**Ext sensor data**=0x7FFF/100=327.67
568 +)))
639 639  
640 -[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
570 +(((
571 +**Temp**=0x088E/100=22.00
572 +)))
641 641  
642 -[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
574 +(((
575 +**Hum**=0x014B/10=32.6
576 +)))
643 643  
644 -[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
645 -
646 -[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
647 -
648 -[[image:image-20230630172740-1.png||height="199" width="868"]]
649 -
650 -
651 -== 2.4 Payload Decoder file ==
652 -
653 -
654 654  (((
655 -In TTN, use can add a custom payload so it shows friendly. 
579 +**poll message flag & Ext**=0x41,means reply data,Ext=1
656 656  )))
657 657  
658 658  (((
659 -In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
583 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
660 660  )))
661 661  
662 662  
663 -== 2.5 Datalog Feature ==
587 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
664 664  
589 +== 2.6 Temperature Alarm Feature ==
665 665  
666 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
667 667  
668 -(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
592 +D2x-LB work flow with Alarm feature.
669 669  
670 670  
671 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
595 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
672 672  
673 673  
674 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
675 -
676 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
677 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
678 -
679 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
680 -
681 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
682 -
683 -
684 -=== 2.5.2 Unix TimeStamp ===
685 -
686 -
687 -DS03A-LB uses Unix TimeStamp format based on
688 -
689 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
690 -
691 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
692 -
693 -Below is the converter example
694 -
695 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
696 -
697 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
698 -
699 -
700 -=== 2.5.3 Set Device Time ===
701 -
702 -
703 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
704 -
705 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
706 -
707 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
708 -
709 -
710 -== 2.6 ​Show Data in DataCake IoT Server ==
711 -
712 -
713 -Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
714 -
715 -
716 -(% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
717 -
718 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
719 -
720 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
721 -
722 -
723 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]
724 -
725 -
726 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]
727 -
728 -
729 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]
730 -
731 -
732 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]
733 -
734 -
735 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]
736 -
737 -
738 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]
739 -
740 -
741 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]
742 -
743 -
744 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]
745 -
746 -
747 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]
748 -
749 -
750 750  == 2.7 Frequency Plans ==
751 751  
752 752  
753 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
601 +The D2x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
754 754  
755 755  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
756 756  
... ... @@ -758,20 +758,23 @@
758 758  == 2.8 ​Firmware Change Log ==
759 759  
760 760  
761 -**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
609 +**Firmware download link:**
762 762  
611 +[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
763 763  
764 -= 3. Configure DS03A-LB =
765 765  
614 += 3. Configure D2x-LB =
615 +
766 766  == 3.1 Configure Methods: ==
767 767  
768 768  
769 -DS03A-LB supports below configure method:
619 +D2x-LB supports below configure method:
770 770  
771 771  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
772 772  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
773 773  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
774 774  
625 +
775 775  == 3.2 General Commands ==
776 776  
777 777  
... ... @@ -785,13 +785,13 @@
785 785  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
786 786  
787 787  
788 -== 3.3 Commands special design for DS03A-LB ==
639 +== 3.3 Commands special design for D2x-LB ==
789 789  
790 790  
791 -These commands only valid for DS03A-LB, as below:
642 +These commands only valid for D2x-LB, as below:
792 792  
793 793  
794 -=== 3.3.1  Set Transmit Interval Time ===
645 +=== 3.3.1 Set Transmit Interval Time ===
795 795  
796 796  
797 797  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -799,7 +799,7 @@
799 799  (% style="color:blue" %)**AT Command: AT+TDC**
800 800  
801 801  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
802 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
653 +|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
803 803  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
804 804  30000
805 805  OK
... ... @@ -819,291 +819,130 @@
819 819  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
820 820  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
821 821  
822 -=== 3.3.2  Enable / Disable Alarm ===
823 823  
674 +=== 3.3.2 Get Device Status ===
824 824  
825 -Feature: Enable/Disable Alarm for open/close event. Default value 0.
826 826  
827 -(% style="color:blue" %)**AT Command: **
677 +Send a LoRaWAN downlink to ask device send Alarm settings.
828 828  
829 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
830 -|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
831 -|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
832 -|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
679 +* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
833 833  
834 -(% style="color:blue" %)**Downlink Command: **
681 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
835 835  
836 -0xA7 01  ~/~/ Same As AT+DISALARM=1
837 837  
838 -0xA7 00  ~/~/ Same As AT+DISALARM=0
684 +=== 3.3.3 Set Alarm Thredhold ===
839 839  
840 840  
841 -=== 3.3.3  Alarm Base on Timeout ===
687 +(% style="color:blue" %)**1.  Set for All Probes:**
842 842  
689 +(% style="color:#037691" %)**AT+18ALARM=min,max**
843 843  
844 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
691 +* When min=0, and max≠0, Alarm trigger when higher than max
692 +* When min≠0, and max=0, Alarm trigger when lower than min
693 +* When min≠0 and max≠0, Alarm trigger when higher than max or lower than min
845 845  
695 +**Example:**
846 846  
847 -* (((
848 -(% style="color:blue" %)**Keep Status: Status to be monitor**
849 -)))
697 + AT+18ALARM=-10,30  ~/~/ Alarm when < -10 or higher than 30.
850 850  
851 -(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
852 852  
853 -(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
700 +* (% style="color:blue" %)**Downlink Payload:**
854 854  
702 +0x(0B F6 1E)   ~/~/ Same as AT+18ALARM=-10,30
855 855  
856 -* (((
857 -(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
858 -)))
704 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
859 859  
860 -Range 0 ~~ 65535(0xFFFF) seconds.
861 861  
862 -If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
707 +(% style="color:blue" %)**2.  Set for Separate Probe:**
863 863  
864 -If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
709 +(% style="color:#037691" %)**AT+18ALARM=min,max,index**
865 865  
711 +Index:
866 866  
867 -* (((
868 -(% style="color:blue" %)**Downlink Command**
869 -)))
713 +* 1: Temperature_Red
714 +* 2: Temperature_White
715 +* 3: Temperature_Black
870 870  
871 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
717 +**Example:**
872 872  
873 -**A9:** Command Type Code
719 + AT+18ALARM=-10,30,1   ~/~/ Alarm when temperature_red < -10 or higher than 30.
874 874  
875 -**aa: **01:TTRIG1; 02:TTRIG2
876 876  
877 -**bb:** status to be monitored
722 +* (% style="color:blue" %)**Downlink Payload:**
878 878  
879 -**cc dd:** timeout.
724 +0x(0B F6 1E 01)   ~/~/ Same as AT+18ALARM=-10,30,1
880 880  
726 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
881 881  
882 -1)**AT+TTRIG1**:(PA8 of pin)
883 883  
884 -(% style="color:blue" %)**AT Command to configure:**
729 +=== 3.3.4 Set Alarm Interval ===
885 885  
886 -* (((
887 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
888 888  
889 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
890 -)))
732 +The shortest time of two Alarm packet. (unit: min)
891 891  
892 -* (((
893 -(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
734 +* (% style="color:blue" %)**AT Command:**
894 894  
736 +AT+ATDC=30  ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
895 895  
896 -
897 -)))
898 898  
899 -(% style="color:blue" %)**Downlink Command to configure:**
739 +* (% style="color:blue" %)**Downlink Payload:**
900 900  
901 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
741 +0x(0D 00 1E)     **~-~-->** Set AT+ATDC=0x 00 1E = 30 minutes
902 902  
903 - 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
904 904  
744 +=== 3.3.5 Get Alarm settings  （什么FPORT?） ===
905 905  
906 -2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
907 907  
908 -(% style="color:blue" %)**AT Command to configure:**
747 +Send a LoRaWAN downlink to ask device send Alarm settings.
909 909  
910 -* (((
911 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
749 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
912 912  
913 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
914 -)))
751 +**Example:**
915 915  
916 -* (((
917 -(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
753 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
918 918  
919 919  
920 -
921 -)))
756 +**Explain:**
922 922  
923 -(% style="color:blue" %)**Downlink Command to configure:**
758 +* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
924 924  
925 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
926 926  
927 - 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
761 +=== 3.3.6 Set Interrupt Mode ===
928 928  
929 929  
930 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
764 +Feature, Set Interrupt mode for GPIO_EXIT.
931 931  
766 +(% style="color:blue" %)**AT Command: AT+INTMOD**
932 932  
933 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
934 -
935 -(% style="color:blue" %)**AT Command:**
936 -
937 937  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
938 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
939 -|(% style="width:155px" %)(((
940 -AT+TTRALARM=0
941 -)))|(% style="width:279px" %)(((
942 -disable continuous alarm
943 -)))|(% style="width:84px" %)(((
769 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
770 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
771 +0
944 944  OK
773 +the mode is 0 =Disable Interrupt
945 945  )))
946 -|(% style="width:155px" %)(((
947 -AT+TTRALARM=60
948 -)))|(% style="width:279px" %)(((
949 -The alarm interval is 60 minutes (unit: minutes)
950 -)))|(% style="width:84px" %)(((
951 -OK
952 -)))
775 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
776 +Set Transmit Interval
777 +0. (Disable Interrupt),
778 +~1. (Trigger by rising and falling edge)
779 +2. (Trigger by falling edge)
780 +3. (Trigger by rising edge)
781 +)))|(% style="width:157px" %)OK
953 953  
954 -(% style="color:blue" %)**Downlink Command:**
783 +(% style="color:blue" %)**Downlink Command: 0x06**
955 955  
956 -Example:  0C aa  => AT+TTRALARM= aa
785 +Format: Command Code (0x06) followed by 3 bytes.
957 957  
787 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
958 958  
959 -=== 3.3.5  Count Mod ===
789 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
790 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
960 960  
961 961  
962 -Feature: Manually set the count mode.
963 -
964 -(% style="color:blue" %)**AT Command:**
965 -
966 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
967 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
968 -|(% style="width:155px" %)(((
969 -AT+COUNTMOD=0
970 -)))|(% style="width:277px" %)(((
971 -the count value keeps accumulating mode
972 -)))|(% style="width:86px" %)(((
973 -OK
974 -)))
975 -|(% style="width:155px" %)(((
976 -AT+COUNTMOD=1
977 -)))|(% style="width:277px" %)(((
978 -the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
979 -)))|(% style="width:86px" %)(((
980 -OK
981 -)))
982 -
983 -(% style="color:blue" %)**Downlink Command:**
984 -
985 -Example:  0B aa  => AT+COUNTMOD = second byte
986 -
987 -
988 -=== 3.3.6  Number of channel of door sensors ===
989 -
990 -
991 -Feature: Set the number of door sensor channels.
992 -
993 -(% style="color:blue" %)**AT Command:**
994 -
995 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
996 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
997 -|(% style="width:155px" %)(((
998 -AT+TTRCHANNEL=1
999 -)))|(% style="width:259px" %)(((
1000 -Set as single channel, only use PA8 pin as interrupt pin.
1001 -)))|(% style="width:44px" %)(((
1002 -OK
1003 -)))
1004 -|(% style="width:155px" %)(((
1005 -AT+TTRCHANNEL=2
1006 -)))|(% style="width:259px" %)(((
1007 -Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
1008 -)))|(% style="width:44px" %)(((
1009 -OK
1010 -)))
1011 -
1012 -(% style="color:blue" %)**Downlink Command:**
1013 -
1014 -Example:  0D aa => AT+TTRCHANNEL = second byte
1015 -
1016 -
1017 -=== 3.3.7  Set Time Sync Mode ===
1018 -
1019 -
1020 -Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
1021 -
1022 -SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
1023 -
1024 -(% style="color:blue" %)**AT Command:**
1025 -
1026 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1027 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1028 -|(% style="width:155px" %)(((
1029 -AT+SYNCMOD=1
1030 -)))|(% style="width:259px" %)(((
1031 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
1032 -)))|(% style="width:44px" %)(((
1033 -OK
1034 -)))
1035 -|(% style="width:155px" %)(((
1036 -AT+SYNCMOD=1,8
1037 -)))|(% style="width:259px" %)(((
1038 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
1039 -)))|(% style="width:44px" %)(((
1040 -OK
1041 -)))
1042 -|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
1043 -
1044 -(% style="color:blue" %)**Downlink Command:**
1045 -
1046 -0x28 01  ~/~/ Same As AT+SYNCMOD=1
1047 -
1048 -0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
1049 -
1050 -0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
1051 -
1052 -0x28 00  ~/~/ Same As AT+SYNCMOD=0
1053 -
1054 -
1055 -=== 3.3.8  Clear the open door times and the duration of the last open door ===
1056 -
1057 -
1058 -(% style="color:blue" %)**AT Command:**
1059 -
1060 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1061 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1062 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1063 -OK
1064 -)))
1065 -
1066 -(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
1067 -
1068 -The sensor will clear the open door times and the duration of the last open door.
1069 -
1070 -
1071 -=== 3.3.9  Set the count value of the number of open door ===
1072 -
1073 -
1074 -(% style="color:blue" %)**AT Command:**
1075 -
1076 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1077 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1078 -|(% style="width:155px" %)(((
1079 -AT+SETCNT=1,100
1080 -)))|(% style="width:259px" %)(((
1081 -Set the open door times of PA8 pin to 100 times.
1082 -)))|(% style="width:44px" %)(((
1083 -OK
1084 -)))
1085 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
1086 -|(% style="width:155px" %)(((
1087 -AT+SETCNT=2,50
1088 -)))|(% style="width:259px" %)(((
1089 -Set the open door times of PA4 pin to 100 times.
1090 -)))|(% style="width:44px" %)(((
1091 -OK
1092 -)))
1093 -
1094 -(% style="color:blue" %)**Downlink Command:**
1095 -
1096 -0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
1097 -
1098 -0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1099 -
1100 -0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1101 -
1102 -
1103 1103  = 4. Battery & Power Consumption =
1104 1104  
1105 1105  
1106 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
796 +D2x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1107 1107  
1108 1108  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1109 1109  
... ... @@ -1111,7 +1111,7 @@
1111 1111  = 5. OTA firmware update =
1112 1112  
1113 1113  
1114 -User can change firmware DS03A-LB to:
804 +User can change firmware S31x-LB to:
1115 1115  
1116 1116  * Change Frequency band/ region.
1117 1117  * Update with new features.
... ... @@ -1120,11 +1120,12 @@
1120 1120  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1121 1121  
1122 1122  
1123 -**Methods to Update Firmware:**
813 +Methods to Update Firmware:
1124 1124  
1125 -* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1126 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
815 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
816 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1127 1127  
818 +
1128 1128  = 6. FAQ =
1129 1129  
1130 1130  
... ... @@ -1132,7 +1132,7 @@
1132 1132  = 7. Order Info =
1133 1133  
1134 1134  
1135 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
826 +Part Number: (% style="color:blue" %)**D20-LB-XX  / D22-LB-XX / D23-LB-XX**
1136 1136  
1137 1137  (% style="color:red" %)**XX**(%%): The default frequency band
1138 1138  
... ... @@ -1152,12 +1152,13 @@
1152 1152  
1153 1153  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1154 1154  
846 +
1155 1155  = 8. ​Packing Info =
1156 1156  
1157 1157  
1158 1158  (% style="color:#037691" %)**Package Includes**:
1159 1159  
1160 -* DS03A-LB LoRaWAN Temperature Sensor
852 +* D2x-LB LoRaWAN Temperature Sensor
1161 1161  
1162 1162  (% style="color:#037691" %)**Dimension and weight**:
1163 1163  
... ... @@ -1169,9 +1169,10 @@
1169 1169  
1170 1170  * Weight / pcs : g
1171 1171  
864 +
1172 1172  = 9. Support =
1173 1173  
1174 1174  
1175 1175  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1176 1176  
1177 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
870 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230426085205-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230516085523-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content
image-20230522092858-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522092934-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522093256-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content
image-20230630155406-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230630155451-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -77.2 KB
Content
image-20230630155527-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -39.2 KB
Content
image-20230630155556-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -38.4 KB
Content
image-20230630155751-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -511.7 KB
Content
image-20230630172740-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230701094042-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content