Skip to Content
Last modified by Mengting Qiu on 2025/07/03 16:36
From version 34.17
edited by Xiaoling
on 2023/07/01 14:35
Change comment: There is no comment for this version
To version 1.1
edited by Edwin Chen
on 2023/04/22 23:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
1 +
3 3  
4 4  
5 5  **Table of Contents：**
... ... @@ -13,64 +13,57 @@
13 13  
14 14  = 1. Introduction =
15 15  
16 -== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
15 +== 1.1 What is D2x-LB LoRaWAN Temperature Sensor ==
17 17  
18 18  
19 19  (((
20 -The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
19 +The Dragino D2x-LB is a (% style="color:blue" %)**LoRaWAN Temperature Sensor**(%%) for Internet of Things solution. D2x-LB has 1 ~~ 3 temperature probes. D2x-LB will convert the Temperature reading to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.
21 21  )))
22 22  
23 23  (((
24 -The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
23 +The LoRa wireless technology used in D2x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 25  )))
26 26  
27 27  (((
28 -The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
27 +The temperature sensor used in D2x-LB can (% style="color:blue" %)**measure -55°C ~~ 125°C with accuracy ±0.5°C (max ±2.0 °C)**(%%).
29 29  )))
30 30  
31 31  (((
32 -DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
31 +D2x-LB supports (% style="color:blue" %)**temperature alarm feature,**(%%) user can set temperature alarm for instant notice. D2x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  )))
34 34  
35 35  (((
36 -DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -
38 -DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
35 +D2x-LB has max 3 probes which measure maximum 3 temperature points.
39 39  )))
40 40  
41 41  (((
42 -DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
39 +D2x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
43 43  )))
44 44  
45 45  (((
46 -DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
43 +D2x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
47 47  )))
48 48  
49 49  (((
50 -Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
47 +Each D2x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
51 51  )))
52 52  
53 53  
54 -[[image:image-20230522092934-2.png||height="346" width="774"]]
55 -
56 -
57 57  == 1.2 ​Features ==
58 58  
59 -
60 60  * LoRaWAN 1.0.3 Class A
61 61  * Ultra-low power consumption
55 +* 1 ~~ 3 External Temperature Probes
56 +* Measure range -55°C ~~ 125°C
57 +* Temperature alarm
62 62  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
63 -* Door Open/Close detect
64 -* Door open/close statistics
65 -* Datalog Feature, Open Alarm Feature
66 66  * Support Bluetooth v5.1 and LoRaWAN remote configure
67 67  * Support wireless OTA update firmware
68 68  * Uplink on periodically
69 69  * Downlink to change configure
70 70  * 8500mAh Battery for long term use
71 -* Wall Mountable
72 -* Outdoor Use
73 73  
65 +
74 74  == 1.3 Specification ==
75 75  
76 76  
... ... @@ -79,10 +79,11 @@
79 79  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
80 80  * Operating Temperature: -40 ~~ 85°C
81 81  
82 -(% style="color:#037691" %)**Sensor Detect Distance:**
74 +(% style="color:#037691" %)**Temperature Sensor:**
83 83  
84 -* Wood Door: 10mm ~~ 30mm
85 -* Iron Door: 30 ~~ 45mm
76 +* Dallas DS18B20
77 +* Range: -55 to + 125°C
78 +* Accuracy ±0.5°C (max ±2.0 °C).
86 86  
87 87  (% style="color:#037691" %)**LoRa Spec:**
88 88  
... ... @@ -104,24 +104,19 @@
104 104  * Sleep Mode: 5uA @ 3.3v
105 105  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
106 106  
107 -== 1.4 Applications ==
108 108  
101 +== 1.4 Sleep mode and working mode ==
109 109  
110 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]
111 111  
112 -
113 -== 1.5 Sleep mode and working mode ==
114 -
115 -
116 116  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
117 117  
118 118  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
119 119  
120 120  
121 -== 1.6 Button & LEDs ==
109 +== 1.5 Button & LEDs ==
122 122  
123 123  
124 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
112 +[[image:1675071855856-879.png]]
125 125  
126 126  
127 127  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
... ... @@ -135,14 +135,15 @@
135 135  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
136 136  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
137 137  )))
138 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
126 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means D2x-LB is in Deep Sleep Mode.
139 139  
140 -== 1.7 BLE connection ==
141 141  
129 +== 1.6 BLE connection ==
142 142  
143 -DS03A-LB support BLE remote configure.
144 144  
132 +D2x-LB support BLE remote configure.
145 145  
134 +
146 146  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
147 147  
148 148  * Press button to send an uplink
... ... @@ -152,82 +152,112 @@
152 152  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
153 153  
154 154  
155 -== 1.8 Pin Definitions ==
144 +== 1.7  Hardware Variant ==
156 156  
157 -[[image:image-20230630160843-7.png]]
158 158  
159 -== 1.9 Mechanical ==
147 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
148 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
149 +|(% style="width:102px" %)D20-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
150 +1 x DS28B20 Probe
160 160  
152 +Cable Length : 2 meters
161 161  
162 -[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
154 +
155 +)))
156 +|(% style="width:102px" %)D22-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 +2 x DS28B20 Probes
163 163  
159 +Cable lengths total 1.5meters per probe
164 164  
165 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
161 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K21G-210811.pdf]]
162 +)))
163 +|(% style="width:102px" %)(((
164 +(((
165 +D23-LB
166 +)))
166 166  
168 +(((
169 +
170 +)))
171 +)))|(% style="width:190px" %) |(% style="width:297px" %)(((
172 +3 x DS28B20 Probes
167 167  
168 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
174 +Cable lengths total 1.5meters per probe
169 169  
176 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K31G-210811.pdf]]
177 +)))
170 170  
171 -[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
179 +(% style="display:none" %)
172 172  
173 173  
174 -= 2. Configure DS03A-LB to connect to LoRaWAN network =
175 175  
183 +== 1.8 Mechanical ==
184 +
185 +
186 +[[image:1675143884058-338.png]]
187 +
188 +
189 +[[image:1675143899218-599.png]]
190 +
191 +
192 +[[image:1675143909447-639.png]]
193 +
194 +
195 += 2. Configure D2x-LB to connect to LoRaWAN network =
196 +
176 176  == 2.1 How it works ==
177 177  
178 178  
179 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
200 +The D2x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the D2x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
180 180  
181 181  
182 182  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
183 183  
184 184  
185 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
206 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
186 186  
187 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
188 188  
189 -[[image:image-20230522092858-1.png||height="391" width="874"]]
209 +The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
190 190  
191 191  
192 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
212 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from D2x-LB.
193 193  
194 -Each DS03A-LB is shipped with a sticker with the default device EUI as below:
214 +Each D2x-LB is shipped with a sticker with the default device EUI as below:
195 195  
196 -[[image:image-20230426085205-1.png||height="238" width="512"]]
216 +[[image:image-20230131134744-2.jpeg]]
197 197  
198 198  
219 +
199 199  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
200 200  
201 -(% style="display:none" %) (%%)
202 202  
203 203  (% style="color:blue" %)**Register the device**
204 204  
225 +[[image:1675144099263-405.png]]
205 205  
206 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)
207 207  
208 -
209 209  (% style="color:blue" %)**Add APP EUI and DEV EUI**
210 210  
211 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]
230 +[[image:1675144117571-832.png]]
212 212  
213 213  
214 214  (% style="color:blue" %)**Add APP EUI in the application**
215 215  
216 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]
217 217  
236 +[[image:1675144143021-195.png]]
218 218  
238 +
219 219  (% style="color:blue" %)**Add APP KEY**
220 220  
221 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
241 +[[image:1675144157838-392.png]]
222 222  
243 +(% style="color:blue" %)**Step 2:**(%%) Activate on D2x-LB
223 223  
224 -(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
225 225  
246 +Press the button for 5 seconds to activate the D2x-LB.
226 226  
227 -Press the button for 5 seconds to activate the DS03A-LB.
248 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
228 228  
229 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
230 -
231 231  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
232 232  
233 233  
... ... @@ -236,7 +236,7 @@
236 236  === 2.3.1 Device Status, FPORT~=5 ===
237 237  
238 238  
239 -Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
258 +Users can use the downlink command(**0x26 01**) to ask D2x-LB to send device configure detail, include device configure status. D2x-LB will uplink a payload via FPort=5 to server.
240 240  
241 241  The Payload format is as below.
242 242  
... ... @@ -248,42 +248,42 @@
248 248  
249 249  Example parse in TTNv3
250 250  
251 -[[image:image-20230630155406-1.png||height="190" width="873"]]
270 +[[image:image-20230415153147-2.png||height="220" width="1120"]]
252 252  
253 253  
254 -(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
273 +(% style="color:#037691" %)**Sensor Model**(%%): For D2x-LB, this value is 0x19
255 255  
256 256  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
257 257  
258 258  (% style="color:#037691" %)**Frequency Band**:
259 259  
260 -0x01: EU868
279 +*0x01: EU868
261 261  
262 -0x02: US915
281 +*0x02: US915
263 263  
264 -0x03: IN865
283 +*0x03: IN865
265 265  
266 -0x04: AU915
285 +*0x04: AU915
267 267  
268 -0x05: KZ865
287 +*0x05: KZ865
269 269  
270 -0x06: RU864
289 +*0x06: RU864
271 271  
272 -0x07: AS923
291 +*0x07: AS923
273 273  
274 -0x08: AS923-1
293 +*0x08: AS923-1
275 275  
276 -0x09: AS923-2
295 +*0x09: AS923-2
277 277  
278 -0x0a: AS923-3
297 +*0x0a: AS923-3
279 279  
280 -0x0b: CN470
299 +*0x0b: CN470
281 281  
282 -0x0c: EU433
301 +*0x0c: EU433
283 283  
284 -0x0d: KR920
303 +*0x0d: KR920
285 285  
286 -0x0e: MA869
305 +*0x0e: MA869
287 287  
288 288  
289 289  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -304,427 +304,282 @@
304 304  Ex2: 0x0B49 = 2889mV
305 305  
306 306  
307 -=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
326 +=== 2.3.2  Sensor Data. FPORT~=2 ===
308 308  
309 309  
310 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
329 +D2x-LB will uplink below payload via FPORT=2 after Joined LoRaWAN Network.
311 311  
312 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
313 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
314 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
315 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
316 -Keep status1)))|(% style="width:99px" %)(((
317 -Keep time1(unit: sec)
318 -)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
319 -Keep time2(unit: sec)
320 -)))|(% style="width:98px" %)(((
321 -Alarm interval(unit: min)
322 -)))
331 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
332 +|=(% style="width: 62.5px;background-color:#D9E2F3" %)(((
333 +**Size(bytes)**
334 +)))|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 120px;background-color:#D9E2F3" %)2|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 65px;background-color:#D9E2F3" %)1|=(% style="width: 65px;background-color:#D9E2F3" %)**2**|=(% style="width: 65px;background-color:#D9E2F3" %)2
335 +|(% style="width:65px" %)**Value**|(((
336 +[[Battery>>||anchor="HBattery:"]]
337 +)))|(% style="width:91px" %)(((
338 +[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]
339 +)))|(% style="width:61px" %)(((
340 +ignore
341 +)))|(% style="width:91px" %)(((
342 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
343 +)))|(% style="width:99px" %)(((
344 +[[Temp_White>>||anchor="HTemperatureWhite:"]]
345 +)))|(% style="width:97px" %)(((
346 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
323 323  
324 -* (((
325 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
348 +
326 326  )))
327 327  
328 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
351 +**Payload per each model.**
329 329  
353 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220916152530-2.png?rev=1.1||alt="image-20220916152530-2.png" height="240" width="901"]]
330 330  
331 -* (((
332 -(% style="color:blue" %)**Disalarm: (default: 0)**
333 -)))
334 334  
335 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
356 +[[image:image-20230415154139-3.png||height="215" width="1179"]]
336 336  
337 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
338 338  
359 +==== (% style="color:#4472c4" %)**Decode corresponding probe color：**(%%) ====
339 339  
340 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
361 +**D20:**
341 341  
363 +Red <~-~-> C1
342 342  
343 -* (((
344 -(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
345 -)))
365 +**D22:**
346 346  
347 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
367 +White <~-~-> C1 Red <~-~-> C2
348 348  
349 -[[image:image-20230630155527-3.png||height="146" width="902"]]
369 +**D23:**
350 350  
371 +White <~-~->C1 Red <~-~-> C2 Black <~-~-> C3
351 351  
352 -* (((
353 -(% style="color:blue" %)**Alarm interval(default: 0)**
354 -)))
355 355  
356 -When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
357 357  
375 +==== (% style="color:#4472c4" %)**Battery:**(%%) ====
358 358  
359 -=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
377 +Sensor Battery Level.
360 360  
379 +Ex1: 0x0B45 = 2885mV
361 361  
362 -DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
381 +Ex2: 0x0B49 = 2889mV
363 363  
364 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
365 -* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
366 366  
367 -1)When **AT+TTRCHANNEL=1**, Uplink Payload totals **11 bytes**. (**Default mode**)
368 368  
369 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
370 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
371 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
372 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
373 -Status
385 +==== (% style="color:#4472c4" %)**Temperature RED or Temperature White :**(%%) ====
374 374  
375 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
376 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
377 -The last door open duration (unit: sec)
378 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
387 +**This point to the Red probe in D20-LB or the probe of D22-LB/D23-LB White**
379 379  
380 -**Status & Alarm:**
389 +**Example**:
381 381  
382 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
383 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit0**
384 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
385 -Count mod
386 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
387 -Alarm 0: No Alarm; 1: Alarm
388 -)))|(% style="width:131px" %)(((
389 -Status 0: Close; 1: Open
390 -)))
391 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
391 391  
392 -[[image:image-20230630155451-2.png||height="246" width="928"]]
393 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
393 393  
395 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
394 394  
395 -* (((
396 -(% style="color:blue" %)**Count mod:Default=0**
397 -)))
398 398  
399 -MOD=0 ~-~-> Uplink total open door times since factory
400 400  
401 -MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
399 +==== (% style="color:#4472c4" %)**Temperature White:**(%%) ====
402 402  
403 403  
404 -* (% style="color:blue" %)**TDC flag**
402 +**This point to the Red probe in D22-LB/D23-LB**
405 405  
406 -When the flag is 1, it means sending packets at normal time intervals.
407 407  
408 -Otherwise, it is a packet sent at non-TDC time.
405 +**Example**:
409 409  
407 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
410 410  
411 -* (((
412 -(% style="color:#0000ff" %)**Alarm**
413 -)))
409 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
414 414  
415 -See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
411 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
416 416  
417 417  
418 -* (((
419 -(% style="color:blue" %)**Status**
420 -)))
421 421  
422 -This bit is 1 when the door sensor is open and 0 when it is close.
415 +==== (% style="color:#4472c4" %)**Temperature Black:**(%%) ====
423 423  
424 424  
425 -* (((
426 -(% style="color:blue" %)**Total open door events**
427 -)))
418 +**This point to the BLACK probe in D23-LB**
428 428  
429 -Total pulse/counting base on open door.
430 430  
431 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
421 +**Example**:
432 432  
423 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
433 433  
434 -* (((
435 -(% style="color:blue" %)**The last door open duration**
436 -)))
425 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
437 437  
438 -Door sensor last open duration.
427 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
439 439  
440 -Unit: sec.
441 441  
442 -[[image:image-20230701094042-1.png||height="154" width="763"]]
443 443  
431 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
444 444  
445 -2) When **AT+TTRCHANNEL=2**, Uplink Payload totals **18 bytes**.
446 446  
447 -(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
434 +**Example:**
448 448  
449 -(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
436 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
450 450  
451 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
452 -|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
453 -|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
454 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
455 -Status1 & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
456 -)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
457 -The last door open duration1 (unit: sec)
458 -)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
459 -Status2 & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
460 -)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
438 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
461 461  
462 -**Status1 & Alarm1:**
463 463  
464 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
465 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:99px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:103px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:216px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**
466 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
467 -Count mod
468 -)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
469 -Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
470 -)))|(% style="width:181px" %)(((
471 -Status1 0: Close; 1: Open (PA8 of pin)
472 -)))
441 +== 2.4 Payload Decoder file ==
473 473  
474 -**Status2 & Alarm2:**
475 475  
476 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
477 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:219px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**
478 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
479 -Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
480 -)))|(% style="width:181px" %)(((
481 -Status2 0: Close; 1: Open (PA4 of pin)
444 +(((
445 +In TTN, use can add a custom payload so it shows friendly. 
482 482  )))
483 483  
484 -[[image:image-20230630155908-6.png||height="295" width="927"]]
485 -
486 -
487 -* (((
488 -(% id="cke_bm_695345S" style="color:blue; display:none" %)** **(% style="color:blue" %)**Count mod:Default=0**
448 +(((
449 +In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
489 489  )))
490 490  
491 -MOD=0 ~-~-> Uplink total open door times since factory
492 492  
493 -MOD=1 ~-~-> Uplink total open door times since last FPORT=2 uplink.
453 +== 2.5 Datalog Feature ==
494 494  
495 495  
496 -* (% style="color:blue" %)**TDC flag**
456 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, D2x-LB will store the reading for future retrieving purposes.
497 497  
498 -When the flag is 1, it means sending packets at normal time intervals.
499 499  
500 -Otherwise, it is a packet sent at non-TDC time.
459 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
501 501  
502 502  
503 -* (((
504 -(% style="color:#0000ff" %)**Alarm1 or Alarm2**
505 -)))
462 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], D2x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,D2x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
506 506  
507 -See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
464 +* a) D2x-LB will do an ACK check for data records sending to make sure every data arrive server.
465 +* b) D2x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but D2x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if D2x-LB gets a ACK, D2x-LB will consider there is a network connection and resend all NONE-ACK Message.
508 508  
467 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
509 509  
510 -* (((
511 -(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
512 -)))
469 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
513 513  
514 -This bit is 1 when the door sensor is open and 0 when it is close.
471 +=== 2.5.2 Unix TimeStamp ===
515 515  
516 516  
517 -* (((
518 -(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
519 -)))
474 +D2x-LB uses Unix TimeStamp format based on
520 520  
521 -Total pulse/counting base on open door.
476 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
522 522  
523 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
478 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
524 524  
480 +Below is the converter example
525 525  
526 -* (((
527 -(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
528 -)))
482 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
529 529  
530 -Door sensor last open duration.
484 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
531 531  
532 -Unit: sec.
533 533  
534 -[[image:image-20230701094042-1.png||height="154" width="763"]]
487 +=== 2.5.3 Set Device Time ===
535 535  
536 536  
537 -=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
490 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
538 538  
492 +Once D2x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to D2x-LB. If D2x-LB fails to get the time from the server, D2x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
539 539  
540 -DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
494 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
541 541  
542 -The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
543 543  
544 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
545 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
546 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
547 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
548 -Status & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
549 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
550 -The last door open duration (unit: sec)
551 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
497 +=== 2.5.4 Datalog Uplink payload  (FPORT~=3) ===
552 552  
553 -**Status & Alarm:**
554 554  
555 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
556 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
557 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
558 -Count mod
559 -)))|(% style="width:95px" %)(((
560 -TDC flag 0:No; 1:Yes
561 -)))|(% style="width:116px" %)(((
562 -Alarm 0: No Alarm; 1: Alarm
563 -)))|(% style="width:112px" %)(((
564 -Status 0:Close; 1: Open
565 -)))
500 +The Datalog poll reply uplink will use below payload format.
566 566  
567 -* (((
568 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
569 -)))
502 +**Retrieval data payload:**
570 570  
571 -For example, in the US915 band, the max payload for different DR is:
504 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
505 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
506 +**Size(bytes)**
507 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 115px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 80px; background-color: rgb(217, 226, 243);" %)**4**
508 +|(% style="width:93px" %)**Value**|(% style="width:54px" %)(((
509 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
510 +)))|(% style="width:54px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:87px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:104px" %)Poll message flag & Ext|(% style="width:55px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
572 572  
573 -(((
574 -**~1. DR0**: max is 11 bytes so one entry of data
575 -)))
512 +**Poll message flag & Ext:**
576 576  
577 -(((
578 -**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
579 -)))
514 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
580 580  
581 -(((
582 -**3. DR2**: total payload includes 11 entries of data
583 -)))
516 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
584 584  
585 -(((
586 -**4. DR3**: total payload includes 22 entries of data.
587 -)))
518 +**Poll Message Flag**: 1: This message is a poll message reply.
588 588  
589 -If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
520 +* Poll Message Flag is set to 1.
590 590  
591 -[[image:image-20230630155556-4.png||height="146" width="938"]]
522 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
592 592  
593 -**Downlink:**
524 +For example, in US915 band, the max payload for different DR is:
594 594  
595 -0x31 64 9E 7D 34 64 9E 7E 9C 05
526 +**a) DR0:** max is 11 bytes so one entry of data
596 596  
528 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
597 597  
598 -**Uplink:**
530 +**c) DR2:** total payload includes 11 entries of data
599 599  
600 -45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
532 +**d) DR3: **total payload includes 22 entries of data.
601 601  
534 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
602 602  
603 -**Parsed Value:**
604 604  
605 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
537 +**Example:**
606 606  
539 +If D2x-LB has below data inside Flash:
607 607  
608 -[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
541 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
609 609  
610 -[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
543 +If user sends below downlink command: 3160065F9760066DA705
611 611  
612 -[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
545 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
613 613  
614 -[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
547 + Stop time: 60066DA7= time 21/1/19 05:27:03
615 615  
616 -[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
617 617  
618 -[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
550 +**D2x-LB will uplink this payload.**
619 619  
620 -[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
552 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
621 621  
622 -[[image:image-20230630172740-1.png||height="199" width="868"]]
554 +(((
555 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
556 +)))
623 623  
558 +(((
559 +Where the first 11 bytes is for the first entry:
560 +)))
624 624  
625 -== 2.4 Payload Decoder file ==
562 +(((
563 +7FFF089801464160065F97
564 +)))
626 626  
566 +(((
567 +**Ext sensor data**=0x7FFF/100=327.67
568 +)))
627 627  
628 628  (((
629 -In TTN, use can add a custom payload so it shows friendly. 
571 +**Temp**=0x088E/100=22.00
630 630  )))
631 631  
632 632  (((
633 -In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
575 +**Hum**=0x014B/10=32.6
634 634  )))
635 635  
578 +(((
579 +**poll message flag & Ext**=0x41,means reply data,Ext=1
580 +)))
636 636  
637 -== 2.5 Datalog Feature ==
582 +(((
583 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
584 +)))
638 638  
639 639  
640 -(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
587 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
641 641  
642 -(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
589 +== 2.6 Temperature Alarm Feature ==
643 643  
644 644  
645 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
592 +D2x-LB work flow with Alarm feature.
646 646  
647 647  
648 -Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
595 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
649 649  
650 -* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
651 -* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
652 652  
653 -Below is the typical case for the Datalog Feature (Set PNACKMD=1)
654 -
655 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
656 -
657 -
658 -=== 2.5.2 Unix TimeStamp ===
659 -
660 -
661 -DS03A-LB uses Unix TimeStamp format based on
662 -
663 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
664 -
665 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
666 -
667 -Below is the converter example
668 -
669 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
670 -
671 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
672 -
673 -
674 -=== 2.5.3 Set Device Time ===
675 -
676 -
677 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
678 -
679 -Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
680 -
681 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
682 -
683 -
684 -== 2.6 ​Show Data in DataCake IoT Server ==
685 -
686 -
687 -Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
688 -
689 -
690 -(% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
691 -
692 -(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
693 -
694 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
695 -
696 -
697 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]
698 -
699 -
700 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]
701 -
702 -
703 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]
704 -
705 -
706 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]
707 -
708 -
709 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]
710 -
711 -
712 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]
713 -
714 -
715 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]
716 -
717 -
718 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]
719 -
720 -
721 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]
722 -
723 -
724 724  == 2.7 Frequency Plans ==
725 725  
726 726  
727 -The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
601 +The D2x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
728 728  
729 729  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
730 730  
... ... @@ -732,20 +732,23 @@
732 732  == 2.8 ​Firmware Change Log ==
733 733  
734 734  
735 -**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
609 +**Firmware download link:**
736 736  
611 +[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
737 737  
738 -= 3. Configure DS03A-LB =
739 739  
614 += 3. Configure D2x-LB =
615 +
740 740  == 3.1 Configure Methods: ==
741 741  
742 742  
743 -DS03A-LB supports below configure method:
619 +D2x-LB supports below configure method:
744 744  
745 745  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
746 746  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
747 747  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
748 748  
625 +
749 749  == 3.2 General Commands ==
750 750  
751 751  
... ... @@ -759,13 +759,13 @@
759 759  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
760 760  
761 761  
762 -== 3.3 Commands special design for DS03A-LB ==
639 +== 3.3 Commands special design for D2x-LB ==
763 763  
764 764  
765 -These commands only valid for DS03A-LB, as below:
642 +These commands only valid for D2x-LB, as below:
766 766  
767 767  
768 -=== 3.3.1  Set Transmit Interval Time ===
645 +=== 3.3.1 Set Transmit Interval Time ===
769 769  
770 770  
771 771  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -773,7 +773,7 @@
773 773  (% style="color:blue" %)**AT Command: AT+TDC**
774 774  
775 775  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
776 -|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
653 +|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
777 777  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
778 778  30000
779 779  OK
... ... @@ -793,291 +793,130 @@
793 793  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
794 794  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
795 795  
796 -=== 3.3.2  Enable / Disable Alarm ===
797 797  
674 +=== 3.3.2 Get Device Status ===
798 798  
799 -Feature: Enable/Disable Alarm for open/close event. Default value 0.
800 800  
801 -(% style="color:blue" %)**AT Command: **
677 +Send a LoRaWAN downlink to ask device send Alarm settings.
802 802  
803 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
804 -|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
805 -|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
806 -|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
679 +* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
807 807  
808 -(% style="color:blue" %)**Downlink Command: **
681 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
809 809  
810 -0xA7 01  ~/~/ Same As AT+DISALARM=1
811 811  
812 -0xA7 00  ~/~/ Same As AT+DISALARM=0
684 +=== 3.3.3 Set Alarm Thredhold ===
813 813  
814 814  
815 -=== 3.3.3  Alarm Base on Timeout ===
687 +(% style="color:blue" %)**1.  Set for All Probes:**
816 816  
689 +(% style="color:#037691" %)**AT+18ALARM=min,max**
817 817  
818 -DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
691 +* When min=0, and max≠0, Alarm trigger when higher than max
692 +* When min≠0, and max=0, Alarm trigger when lower than min
693 +* When min≠0 and max≠0, Alarm trigger when higher than max or lower than min
819 819  
695 +**Example:**
820 820  
821 -* (((
822 -(% style="color:blue" %)**Keep Status: Status to be monitor**
823 -)))
697 + AT+18ALARM=-10,30  ~/~/ Alarm when < -10 or higher than 30.
824 824  
825 -(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
826 826  
827 -(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
700 +* (% style="color:blue" %)**Downlink Payload:**
828 828  
702 +0x(0B F6 1E)   ~/~/ Same as AT+18ALARM=-10,30
829 829  
830 -* (((
831 -(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
832 -)))
704 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
833 833  
834 -Range 0 ~~ 65535(0xFFFF) seconds.
835 835  
836 -If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
707 +(% style="color:blue" %)**2.  Set for Separate Probe:**
837 837  
838 -If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
709 +(% style="color:#037691" %)**AT+18ALARM=min,max,index**
839 839  
711 +Index:
840 840  
841 -* (((
842 -(% style="color:blue" %)**Downlink Command**
843 -)))
713 +* 1: Temperature_Red
714 +* 2: Temperature_White
715 +* 3: Temperature_Black
844 844  
845 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
717 +**Example:**
846 846  
847 -**A9:** Command Type Code
719 + AT+18ALARM=-10,30,1   ~/~/ Alarm when temperature_red < -10 or higher than 30.
848 848  
849 -**aa: **01:TTRIG1; 02:TTRIG2
850 850  
851 -**bb:** status to be monitored
722 +* (% style="color:blue" %)**Downlink Payload:**
852 852  
853 -**cc dd:** timeout.
724 +0x(0B F6 1E 01)   ~/~/ Same as AT+18ALARM=-10,30,1
854 854  
726 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
855 855  
856 -1)**AT+TTRIG1**:(PA8 of pin)
857 857  
858 -(% style="color:blue" %)**AT Command to configure:**
729 +=== 3.3.4 Set Alarm Interval ===
859 859  
860 -* (((
861 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
862 862  
863 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
864 -)))
732 +The shortest time of two Alarm packet. (unit: min)
865 865  
866 -* (((
867 -(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
734 +* (% style="color:blue" %)**AT Command:**
868 868  
736 +AT+ATDC=30  ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
869 869  
870 -
871 -)))
872 872  
873 -(% style="color:blue" %)**Downlink Command to configure:**
739 +* (% style="color:blue" %)**Downlink Payload:**
874 874  
875 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
741 +0x(0D 00 1E)     **~-~-->** Set AT+ATDC=0x 00 1E = 30 minutes
876 876  
877 - 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
878 878  
744 +=== 3.3.5 Get Alarm settings  （什么FPORT?） ===
879 879  
880 -2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
881 881  
882 -(% style="color:blue" %)**AT Command to configure:**
747 +Send a LoRaWAN downlink to ask device send Alarm settings.
883 883  
884 -* (((
885 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
749 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
886 886  
887 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
888 -)))
751 +**Example:**
889 889  
890 -* (((
891 -(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
753 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
892 892  
893 893  
894 -
895 -)))
756 +**Explain:**
896 896  
897 -(% style="color:blue" %)**Downlink Command to configure:**
758 +* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
898 898  
899 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
900 900  
901 - 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
761 +=== 3.3.6 Set Interrupt Mode ===
902 902  
903 903  
904 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
764 +Feature, Set Interrupt mode for GPIO_EXIT.
905 905  
766 +(% style="color:blue" %)**AT Command: AT+INTMOD**
906 906  
907 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
908 -
909 -(% style="color:blue" %)**AT Command:**
910 -
911 911  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
912 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
913 -|(% style="width:155px" %)(((
914 -AT+TTRALARM=0
915 -)))|(% style="width:279px" %)(((
916 -disable continuous alarm
917 -)))|(% style="width:84px" %)(((
769 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
770 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
771 +0
918 918  OK
773 +the mode is 0 =Disable Interrupt
919 919  )))
920 -|(% style="width:155px" %)(((
921 -AT+TTRALARM=60
922 -)))|(% style="width:279px" %)(((
923 -The alarm interval is 60 minutes (unit: minutes)
924 -)))|(% style="width:84px" %)(((
925 -OK
926 -)))
775 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
776 +Set Transmit Interval
777 +0. (Disable Interrupt),
778 +~1. (Trigger by rising and falling edge)
779 +2. (Trigger by falling edge)
780 +3. (Trigger by rising edge)
781 +)))|(% style="width:157px" %)OK
927 927  
928 -(% style="color:blue" %)**Downlink Command:**
783 +(% style="color:blue" %)**Downlink Command: 0x06**
929 929  
930 -Example:  0C aa  => AT+TTRALARM= aa
785 +Format: Command Code (0x06) followed by 3 bytes.
931 931  
787 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
932 932  
933 -=== 3.3.5  Count Mod ===
789 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
790 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
934 934  
935 935  
936 -Feature: Manually set the count mode.
937 -
938 -(% style="color:blue" %)**AT Command:**
939 -
940 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
941 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
942 -|(% style="width:155px" %)(((
943 -AT+COUNTMOD=0
944 -)))|(% style="width:277px" %)(((
945 -the count value keeps accumulating mode
946 -)))|(% style="width:86px" %)(((
947 -OK
948 -)))
949 -|(% style="width:155px" %)(((
950 -AT+COUNTMOD=1
951 -)))|(% style="width:277px" %)(((
952 -the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
953 -)))|(% style="width:86px" %)(((
954 -OK
955 -)))
956 -
957 -(% style="color:blue" %)**Downlink Command:**
958 -
959 -Example:  0B aa  => AT+COUNTMOD = second byte
960 -
961 -
962 -=== 3.3.6  Number of channel of door sensors ===
963 -
964 -
965 -Feature: Set the number of door sensor channels.
966 -
967 -(% style="color:blue" %)**AT Command:**
968 -
969 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
970 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
971 -|(% style="width:155px" %)(((
972 -AT+TTRCHANNEL=1
973 -)))|(% style="width:259px" %)(((
974 -Set as single channel, only use PA8 pin as interrupt pin.
975 -)))|(% style="width:44px" %)(((
976 -OK
977 -)))
978 -|(% style="width:155px" %)(((
979 -AT+TTRCHANNEL=2
980 -)))|(% style="width:259px" %)(((
981 -Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
982 -)))|(% style="width:44px" %)(((
983 -OK
984 -)))
985 -
986 -(% style="color:blue" %)**Downlink Command:**
987 -
988 -Example:  0D aa => AT+TTRCHANNEL = second byte
989 -
990 -
991 -=== 3.3.7  Set Time Sync Mode ===
992 -
993 -
994 -Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
995 -
996 -SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
997 -
998 -(% style="color:blue" %)**AT Command:**
999 -
1000 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1001 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1002 -|(% style="width:155px" %)(((
1003 -AT+SYNCMOD=1
1004 -)))|(% style="width:259px" %)(((
1005 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
1006 -)))|(% style="width:44px" %)(((
1007 -OK
1008 -)))
1009 -|(% style="width:155px" %)(((
1010 -AT+SYNCMOD=1,8
1011 -)))|(% style="width:259px" %)(((
1012 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
1013 -)))|(% style="width:44px" %)(((
1014 -OK
1015 -)))
1016 -|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
1017 -
1018 -(% style="color:blue" %)**Downlink Command:**
1019 -
1020 -0x28 01  ~/~/ Same As AT+SYNCMOD=1
1021 -
1022 -0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
1023 -
1024 -0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
1025 -
1026 -0x28 00  ~/~/ Same As AT+SYNCMOD=0
1027 -
1028 -
1029 -=== 3.3.8  Clear the open door times and the duration of the last open door ===
1030 -
1031 -
1032 -(% style="color:blue" %)**AT Command:**
1033 -
1034 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1035 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1036 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1037 -OK
1038 -)))
1039 -
1040 -(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
1041 -
1042 -The sensor will clear the open door times and the duration of the last open door.
1043 -
1044 -
1045 -=== 3.3.9  Set the count value of the number of open door ===
1046 -
1047 -
1048 -(% style="color:blue" %)**AT Command:**
1049 -
1050 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1051 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1052 -|(% style="width:155px" %)(((
1053 -AT+SETCNT=1,100
1054 -)))|(% style="width:259px" %)(((
1055 -Set the open door times of PA8 pin to 100 times.
1056 -)))|(% style="width:44px" %)(((
1057 -OK
1058 -)))
1059 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
1060 -|(% style="width:155px" %)(((
1061 -AT+SETCNT=2,50
1062 -)))|(% style="width:259px" %)(((
1063 -Set the open door times of PA4 pin to 100 times.
1064 -)))|(% style="width:44px" %)(((
1065 -OK
1066 -)))
1067 -
1068 -(% style="color:blue" %)**Downlink Command:**
1069 -
1070 -0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
1071 -
1072 -0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1073 -
1074 -0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1075 -
1076 -
1077 1077  = 4. Battery & Power Consumption =
1078 1078  
1079 1079  
1080 -DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
796 +D2x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1081 1081  
1082 1082  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1083 1083  
... ... @@ -1085,7 +1085,7 @@
1085 1085  = 5. OTA firmware update =
1086 1086  
1087 1087  
1088 -User can change firmware DS03A-LB to:
804 +User can change firmware S31x-LB to:
1089 1089  
1090 1090  * Change Frequency band/ region.
1091 1091  * Update with new features.
... ... @@ -1094,11 +1094,12 @@
1094 1094  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1095 1095  
1096 1096  
1097 -**Methods to Update Firmware:**
813 +Methods to Update Firmware:
1098 1098  
1099 -* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1100 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
815 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
816 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1101 1101  
818 +
1102 1102  = 6. FAQ =
1103 1103  
1104 1104  
... ... @@ -1106,7 +1106,7 @@
1106 1106  = 7. Order Info =
1107 1107  
1108 1108  
1109 -Part Number: (% style="color:blue" %)**DS03A-LB-XX**
826 +Part Number: (% style="color:blue" %)**D20-LB-XX  / D22-LB-XX / D23-LB-XX**
1110 1110  
1111 1111  (% style="color:red" %)**XX**(%%): The default frequency band
1112 1112  
... ... @@ -1126,12 +1126,13 @@
1126 1126  
1127 1127  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1128 1128  
846 +
1129 1129  = 8. ​Packing Info =
1130 1130  
1131 1131  
1132 1132  (% style="color:#037691" %)**Package Includes**:
1133 1133  
1134 -* DS03A-LB LoRaWAN Temperature Sensor
852 +* D2x-LB LoRaWAN Temperature Sensor
1135 1135  
1136 1136  (% style="color:#037691" %)**Dimension and weight**:
1137 1137  
... ... @@ -1143,9 +1143,10 @@
1143 1143  
1144 1144  * Weight / pcs : g
1145 1145  
864 +
1146 1146  = 9. Support =
1147 1147  
1148 1148  
1149 1149  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1150 1150  
1151 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
870 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230426085205-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230516085523-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content
image-20230522092858-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522092934-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -156.5 KB
Content
image-20230522093256-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content
image-20230630155406-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230630155451-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -77.2 KB
Content
image-20230630155527-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -39.2 KB
Content
image-20230630155556-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -38.4 KB
Content
image-20230630155751-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -511.7 KB
Content
image-20230630172740-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230701094042-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content