Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 32.1 >
edited by Saxer Lin
on 2023/07/01 09:57
To version < 25.1 >
edited by Saxer Lin
on 2023/06/30 17:23
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -373,6 +373,7 @@
373 373  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
374 374  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
375 375  
376 +
376 376  1)When **AT+TTRCHANNEL=1**, Uplink Payload totals 11 bytes. (**Default mode**)
377 377  
378 378  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
... ... @@ -388,15 +388,15 @@
388 388  
389 389  **Status & Alarm:**
390 390  
391 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:668px" %)
392 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:148px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:131px" %)**bit0**
392 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:645px" %)
393 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:125px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit0**
393 393  |(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
394 394  Count mod
395 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
396 -Alarm 0: No Alarm;
396 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:125px" %)(((
397 +0: No Alarm;
397 397  
398 398  1: Alarm
399 -)))|(% style="width:131px" %)(((
400 +)))|(% style="width:129px" %)(((
400 400  Status 0: Close;
401 401  
402 402  1: Open
... ... @@ -405,56 +405,6 @@
405 405  [[image:image-20230630155451-2.png||height="246" width="928"]]
406 406  
407 407  
408 -* (((
409 -(% style="color:blue" %)**Count mod:Default=0**
410 -)))
411 -
412 -MOD=0 ~-~-> Uplink total door open times since factory
413 -
414 -MOD=1 ~-~-> Uplink total door open times since last FPORT=2 uplink.
415 -
416 -
417 -* (% style="color:blue" %)**TDC flag**
418 -
419 -When the flag is 1, it means sending packets at normal time intervals.
420 -
421 -Otherwise, it is a packet sent at non-TDC time.
422 -
423 -
424 -* (((
425 -(% style="color:#0000ff" %)**Alarm**
426 -)))
427 -
428 -See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
429 -
430 -
431 -* (((
432 -(% style="color:blue" %)**Status**
433 -)))
434 -
435 -This bit is 1 when the door sensor is open and 0 when it is close.
436 -
437 -
438 -* (((
439 -(% style="color:blue" %)**Total open door events**
440 -)))
441 -
442 -Total pulse/counting base on open door.
443 -
444 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
445 -
446 -
447 -* (((
448 -(% style="color:blue" %)**The last door open duration**
449 -)))
450 -
451 -Door sensor last open duration.
452 -
453 -Unit: sec.
454 -
455 -[[image:image-20230701094042-1.png||height="154" width="763"]]
456 -
457 -
458 458  2)When **AT+TTRCHANNEL=2**, Uplink Payload totals 18 bytes.
459 459  
460 460  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
... ... @@ -474,87 +474,37 @@
474 474  
475 475  **Status1 & Alarm1:**
476 476  
477 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:775px" %)
478 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:99px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:103px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:216px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**
479 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
428 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:730px" %)
429 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:167px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:171px" %)**bit0**
430 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
480 480  Count mod
481 -)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
482 -Alarm1 0: No Alarm; 1: Alarm
432 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:167px" %)(((
433 +0: No Alarm; 1: Alarm
483 483  
484 -(PA8 of pin)
485 -)))|(% style="width:181px" %)(((
486 -Status1 0: Close; 1:Open
435 +(PA8)
436 +)))|(% style="width:171px" %)(((
437 +Status 0: Close; 1:Open
487 487  
488 -(PA8 of pin)
439 +(PA8)
489 489  )))
490 490  
491 491  **Status2 & Alarm2:**
492 492  
493 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:591px" %)
494 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:219px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:181px" %)**bit0**
495 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
496 -Alarm2 0: No Alarm; 1: Alarm
444 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:550px" %)
445 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:176px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:175px" %)**bit0**
446 +|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:176px" %)(((
447 +0: No Alarm; 1: Alarm
497 497  
498 -(PA4 of pin)
499 -)))|(% style="width:181px" %)(((
500 -Status2 0: Close,;1:Open
449 +(PA4)
450 +)))|(% style="width:175px" %)(((
451 +Status 0: Close,;1:Open
501 501  
502 -(PA4 of pin)
453 +(PA4)
503 503  )))
504 504  
505 505  [[image:image-20230630155908-6.png||height="295" width="927"]]
506 506  
507 507  
508 -* (((
509 -(% id="cke_bm_695345S" style="color: blue; display: none" %)** **(% style="color:blue" %)**Count mod:Default=0**
510 -)))
511 -
512 -MOD=0 ~-~-> Uplink total door open times since factory
513 -
514 -MOD=1 ~-~-> Uplink total door open times since last FPORT=2 uplink.
515 -
516 -
517 -* (% style="color:blue" %)**TDC flag**
518 -
519 -When the flag is 1, it means sending packets at normal time intervals.
520 -
521 -Otherwise, it is a packet sent at non-TDC time.
522 -
523 -
524 -* (((
525 -(% style="color:#0000ff" %)**Alarm1 or Alarm2**
526 -)))
527 -
528 -See [[Alarm Base on Timeout>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/DS03A-LB/#H3.3.3A0AlarmBaseonTimeout]]
529 -
530 -
531 -* (((
532 -(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
533 -)))
534 -
535 -This bit is 1 when the door sensor is open and 0 when it is close.
536 -
537 -
538 -* (((
539 -(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
540 -)))
541 -
542 -Total pulse/counting base on open door.
543 -
544 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
545 -
546 -
547 -* (((
548 -(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
549 -)))
550 -
551 -Door sensor last open duration.
552 -
553 -Unit: sec.
554 -
555 -[[image:image-20230701094042-1.png||height="154" width="763"]]
556 -
557 -
558 558  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
559 559  
560 560  
... ... @@ -579,13 +579,7 @@
579 579  |(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
580 580  |(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
581 581  Count mod
582 -)))|(% style="width:95px" %)(((
583 -TDC flag 0:No;
584 -
585 -1:Yes
586 -)))|(% style="width:116px" %)(((
587 -Alarm
588 -
483 +)))|(% style="width:95px" %)TDC flag 0:No;1:Yes|(% style="width:116px" %)(((
589 589  0: No Alarm;
590 590  
591 591  1: Alarm
... ... @@ -633,7 +633,7 @@
633 633  
634 634  **Parsed Value:**
635 635  
636 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
531 +[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, DOOR_OPEN_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
637 637  
638 638  
639 639  [SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
... ... @@ -650,7 +650,7 @@
650 650  
651 651  [PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
652 652  
653 -[[image:image-20230630172740-1.png||height="199" width="868"]]
548 +[[image:image-20230630155751-5.png||height="188" width="809"]]
654 654  
655 655  
656 656  == 2.4 Payload Decoder file ==
... ... @@ -796,7 +796,7 @@
796 796  These commands only valid for DS03A-LB, as below:
797 797  
798 798  
799 -=== 3.3.1  Set Transmit Interval Time ===
694 +=== 3.3.1 Set Transmit Interval Time ===
800 800  
801 801  
802 802  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -824,9 +824,19 @@
824 824  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
825 825  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
826 826  
827 -=== 3.3.2  Enable / Disable Alarm ===
722 +=== 3.3.2 Get Device Status ===
828 828  
829 829  
725 +Send a LoRaWAN downlink to ask device send Alarm settings.
726 +
727 +* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
728 +
729 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
730 +
731 +
732 +=== 3.3.3  Enable / Disable Alarm ===
733 +
734 +
830 830  Feature: Enable/Disable Alarm for open/close event. Default value 0.
831 831  
832 832  (% style="color:blue" %)**AT Command: **
... ... @@ -843,7 +843,7 @@
843 843  0xA7 00  ~/~/ Same As AT+DISALARM=0
844 844  
845 845  
846 -=== 3.3.3  Alarm Base on Timeout ===
751 +=== 3.3.4  Alarm Base on Timeout ===
847 847  
848 848  
849 849  DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
... ... @@ -869,103 +869,37 @@
869 869  If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
870 870  
871 871  
872 -* (((
873 -(% style="color:blue" %)**Downlink Command**
874 -)))
875 -
876 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
877 -
878 -**A9:** Command Type Code
879 -
880 -**aa: **01:TTRIG1; 02:TTRIG2
881 -
882 -**bb:** status to be monitored
883 -
884 -**cc dd:** timeout.
885 -
886 -
887 -1)**AT+TTRIG1**:(PA8 of pin)
888 -
889 889  (% style="color:blue" %)**AT Command to configure:**
890 890  
891 891  * (((
892 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
893 -
894 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
780 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
895 895  )))
896 896  
897 897  * (((
898 -(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
899 -
900 -
901 -
784 +(% style="color:#037691" %)**AT+TTRIG=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
902 902  )))
903 903  
904 904  (% style="color:blue" %)**Downlink Command to configure:**
905 905  
906 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
789 +(% style="color:#037691" %)**Command: 0xA9 aa bb cc**
907 907  
908 - 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
791 +**A9:** Command Type Code
909 909  
793 +**aa:** status to be monitored
910 910  
911 -2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
795 +**bb cc:** timeout.
912 912  
913 -(% style="color:blue" %)**AT Command to configure:**
914 914  
915 -* (((
916 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
798 +If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
917 917  
918 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
919 -)))
800 +Or
920 920  
921 -* (((
922 -(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
802 +0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
923 923  
924 924  
925 -
926 -)))
927 -
928 -(% style="color:blue" %)**Downlink Command to configure:**
929 -
930 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
931 -
932 - 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
933 -
934 -
935 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
936 -
937 -
938 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
939 -
940 -(% style="color:blue" %)**AT Command:**
941 -
942 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
943 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
944 -|(% style="width:155px" %)(((
945 -AT+TTRALARM=0
946 -)))|(% style="width:279px" %)(((
947 -disable continuous alarm
948 -)))|(% style="width:84px" %)(((
949 -OK
950 -)))
951 -|(% style="width:155px" %)(((
952 -AT+TTRALARM=60
953 -)))|(% style="width:279px" %)(((
954 -The alarm interval is 60 minutes (unit: minutes)
955 -)))|(% style="width:84px" %)(((
956 -OK
957 -)))
958 -
959 -(% style="color:blue" %)**Downlink Command:**
960 -
961 -Example:  0C aa  => AT+TTRALARM= aa
962 -
963 -
964 964  === 3.3.5  Count Mod ===
965 965  
966 966  
967 -Feature: Manually set the count mode.
968 -
969 969  (% style="color:blue" %)**AT Command:**
970 970  
971 971  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
... ... @@ -990,26 +990,24 @@
990 990  Example:  0B aa  => AT+COUNTMOD = second byte
991 991  
992 992  
993 -=== 3.3.6  Number of channel of door sensors ===
832 +=== 3.3.6  Interrupt Pin Channel Mod ===
994 994  
995 995  
996 -Feature: Set the number of door sensor channels.
997 -
998 998  (% style="color:blue" %)**AT Command:**
999 999  
1000 1000  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1001 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
838 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1002 1002  |(% style="width:155px" %)(((
1003 1003  AT+TTRCHANNEL=1
1004 -)))|(% style="width:259px" %)(((
1005 -Set as single channel, only use PA8 pin as interrupt pin.
841 +)))|(% style="width:288px" %)(((
842 +set as single channel, only use PA8 pin as interrupt pin.
1006 1006  )))|(% style="width:44px" %)(((
1007 1007  OK
1008 1008  )))
1009 1009  |(% style="width:155px" %)(((
1010 1010  AT+TTRCHANNEL=2
1011 -)))|(% style="width:259px" %)(((
1012 -Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
848 +)))|(% style="width:288px" %)(((
849 +is set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
1013 1013  )))|(% style="width:44px" %)(((
1014 1014  OK
1015 1015  )))
... ... @@ -1019,92 +1019,51 @@
1019 1019  Example:  0D aa => AT+TTRCHANNEL = second byte
1020 1020  
1021 1021  
1022 -=== 3.3.7  Set Time Sync Mode ===
859 +=== 3.3.7  Change the name of AT+TTRIG to AT+TTRIG1 ===
1023 1023  
1024 1024  
1025 -Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
1026 -
1027 -SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
1028 -
1029 -(% style="color:blue" %)**AT Command:**
1030 -
1031 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1032 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1033 -|(% style="width:155px" %)(((
1034 -AT+SYNCMOD=1
1035 -)))|(% style="width:259px" %)(((
1036 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
1037 -)))|(% style="width:44px" %)(((
1038 -OK
1039 -)))
1040 -|(% style="width:155px" %)(((
1041 -AT+SYNCMOD=1,8
1042 -)))|(% style="width:259px" %)(((
1043 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
1044 -)))|(% style="width:44px" %)(((
1045 -OK
1046 -)))
1047 -|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
1048 -
1049 1049  (% style="color:blue" %)**Downlink Command:**
1050 1050  
1051 -0x28 01  ~/~/ Same As AT+SYNCMOD=1
864 +Example:  A9 01 aa bb cc  => AT+TTRIG1= third byte, 4th byte and 5th byte
1052 1052  
1053 -0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
1054 1054  
1055 -0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
867 +=== 3.3.8  Added AT+TTRIG2 for PB15 pin ===
1056 1056  
1057 -0x28 00  ~/~/ Same As AT+SYNCMOD=0
1058 1058  
870 +(% style="color:blue" %)**Downlink Command:**
1059 1059  
1060 -=== 3.3.8  Clear the open door times and the duration of the last open door ===
872 +Example: A9 02 aa bb cc  => AT+TTRIG2= third byte, 4th byte and 5th byte
1061 1061  
1062 1062  
1063 -(% style="color:blue" %)**AT Command:**
875 +=== 3.3.9  TTRIG1/2 timeout status alarm ===
1064 1064  
1065 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1066 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1067 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1068 -OK
1069 -)))
1070 1070  
1071 -(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
878 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
1072 1072  
1073 -The sensor will clear the open door times and the duration of the last open door.
1074 -
1075 -
1076 -=== 3.3.9  Set the count value of the number of open door ===
1077 -
1078 -
1079 1079  (% style="color:blue" %)**AT Command:**
1080 1080  
1081 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1082 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
882 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
883 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1083 1083  |(% style="width:155px" %)(((
1084 -AT+SETCNT=1,100
1085 -)))|(% style="width:259px" %)(((
1086 -Set the open door times of PA8 pin to 100 times.
1087 -)))|(% style="width:44px" %)(((
885 +AT+TTRALARM=0
886 +)))|(% style="width:279px" %)(((
887 +disable continuous alarm
888 +)))|(% style="width:84px" %)(((
1088 1088  OK
1089 1089  )))
1090 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
1091 1091  |(% style="width:155px" %)(((
1092 -AT+SETCNT=2,50
1093 -)))|(% style="width:259px" %)(((
1094 -Set the open door times of PA4 pin to 100 times.
1095 -)))|(% style="width:44px" %)(((
892 +AT+TTRALARM=60
893 +)))|(% style="width:279px" %)(((
894 +The alarm interval is 60 minutes (unit: minutes)
895 +)))|(% style="width:84px" %)(((
1096 1096  OK
1097 1097  )))
1098 1098  
1099 1099  (% style="color:blue" %)**Downlink Command:**
1100 1100  
1101 -0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
901 +Example:  0C aa  => AT+TTRALARM= aa
1102 1102  
1103 -0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1104 1104  
1105 -0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1106 -
1107 -
1108 1108  = 4. Battery & Power Consumption =
1109 1109  
1110 1110  
image-20230630172740-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230701094042-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -34.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0