Skip to Content
Last modified by Mengting Qiu on 2025/07/03 16:36
From version 30.1
edited by Saxer Lin
on 2023/07/01 09:40
Change comment: Uploaded new attachment "image-20230701094042-1.png", version {1}
To version 38.3
edited by Xiaoling
on 2023/07/19 17:06
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Xiaoling
Content
... ... @@ -71,6 +71,7 @@
71 71  * Wall Mountable
72 72  * Outdoor Use
73 73  
74 +
74 74  == 1.3 Specification ==
75 75  
76 76  
... ... @@ -79,11 +79,6 @@
79 79  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
80 80  * Operating Temperature: -40 ~~ 85°C
81 81  
82 -(% style="color:#037691" %)**Sensor Detect Distance:**
83 -
84 -* Wood Door: 10mm ~~ 30mm
85 -* Iron Door: 30 ~~ 45mm
86 -
87 87  (% style="color:#037691" %)**LoRa Spec:**
88 88  
89 89  * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
... ... @@ -104,6 +104,7 @@
104 104  * Sleep Mode: 5uA @ 3.3v
105 105  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
106 106  
103 +
107 107  == 1.4 Applications ==
108 108  
109 109  
... ... @@ -137,6 +137,7 @@
137 137  )))
138 138  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
139 139  
137 +
140 140  == 1.7 BLE connection ==
141 141  
142 142  
... ... @@ -156,6 +156,7 @@
156 156  
157 157  [[image:image-20230630160843-7.png]]
158 158  
157 +
159 159  == 1.9 Mechanical ==
160 160  
161 161  
... ... @@ -171,6 +171,14 @@
171 171  [[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
172 172  
173 173  
173 +== 1.10 Magnet Distance ==
174 +
175 +
176 +* Wood Door: 10mm ~~ 30mm
177 +* Iron Door: 30 ~~ 45mm
178 +
179 +
180 +
174 174  = 2. Configure DS03A-LB to connect to LoRaWAN network =
175 175  
176 176  == 2.1 How it works ==
... ... @@ -236,11 +236,13 @@
236 236  === 2.3.1 Device Status, FPORT~=5 ===
237 237  
238 238  
239 -Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
246 +Include device configure status. Once DS03A-LB Joined the network, it will uplink this message to the server. After that, DS03A-LB will uplink Device Status every 12 hours.
240 240  
241 -The Payload format is as below.
248 +Users can also use the downlink command**(0x26 01)** to ask DS03A-LB to resend this uplink. This uplink payload also includes the DeviceTimeReq to get time.
242 242  
243 243  
251 +The Payload format is as below.
252 +
244 244  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
245 245  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
246 246  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
... ... @@ -304,32 +304,29 @@
304 304  Ex2: 0x0B49 = 2889mV
305 305  
306 306  
307 -=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
316 +=== 2.3.2  Sensor Configuration, FPORT~=4 ===
308 308  
309 309  
310 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
319 +DS03A-LB will only send this command after getting the downlink command **(0x26 02)** from the server.
311 311  
312 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:723px" %)
313 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:721px" %)**Sensor Configuration FPORT=4**
314 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:99px" %)**2**|(% style="width:87px" %)**1**|(% style="width:97px" %)**2**|(% style="width:98px" %)**1**
321 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
322 +|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:515px" %)**Sensor Configuration FPORT=4**
323 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:50px" %)**1**|(% style="width:100px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**1**|(% style="width:100px" %)**2**|(% style="width:98px" %)**1**
315 315  |**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
316 316  Keep status1
317 -
318 -
319 319  )))|(% style="width:99px" %)(((
320 -Keep time1
321 -
322 -(unit: sec)
327 +Keep time1(unit: sec)
323 323  )))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
324 -Keep time2
325 -
326 -(unit: sec)
329 +Keep time2(unit: sec)
327 327  )))|(% style="width:98px" %)(((
328 -Alarm interval
329 -
330 -(unit: min)
331 +Alarm interval(unit: min)
331 331  )))
332 332  
334 +Example parse in TTNv3
335 +
336 +[[image:image-20230630155527-3.png||height="146" width="902"]]
337 +
338 +
333 333  * (((
334 334  (% style="color:blue" %)**TDC: (default: 0x001C20)**
335 335  )))
... ... @@ -353,9 +353,8 @@
353 353  (% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
354 354  )))
355 355  
356 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
362 +Shows the configure value of [[Alarm Base on Timeout Feature>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
357 357  
358 -[[image:image-20230630155527-3.png||height="146" width="902"]]
359 359  
360 360  
361 361  * (((
... ... @@ -370,18 +370,16 @@
370 370  
371 371  DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
372 372  
373 -* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
378 +* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1A0SetTransmitIntervalTime"]].
374 374  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
375 375  
376 -1)When **AT+TTRCHANNEL=1**, Uplink Payload totals 11 bytes. (**Default mode**)
381 +**1) When (% style="color:blue" %)AT+TTRCHANNEL=1(%%), Uplink Payload totals (% style="color:blue" %)11 bytes. (Default mode)(%%)**
377 377  
378 378  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
379 379  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
380 380  |(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
381 381  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
382 -Status
383 -
384 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
387 +Status & [[Alarm>>||anchor="H3.3.4A0TTRIG126TTRIG2timeoutstatusalarm"]]
385 385  )))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
386 386  The last door open duration (unit: sec)
387 387  )))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
... ... @@ -388,73 +388,161 @@
388 388  
389 389  **Status & Alarm:**
390 390  
391 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:645px" %)
392 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:125px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit0**
394 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
395 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:105px" %)**bit0**
393 393  |(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
394 394  Count mod
395 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:125px" %)(((
396 -0: No Alarm;
398 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:148px" %)(((
399 +Alarm 0: No Alarm; 1: Alarm
400 +)))|(% style="width:131px" %)(((
401 +Status 0: Close; 1: Open
402 +)))
397 397  
398 -1: Alarm
399 -)))|(% style="width:129px" %)(((
400 -Status 0: Close;
404 +[[image:image-20230630155451-2.png||height="246" width="928"]]
401 401  
402 -1: Open
406 +
407 +* (((
408 +(% style="color:blue" %)**Count mod:Default=0**
403 403  )))
404 404  
405 -[[image:image-20230630155451-2.png||height="246" width="928"]]
411 +0: Uplink total open door times since factory
406 406  
413 +1: Uplink total open door times since last FPORT=2 uplink.
407 407  
408 -2)When **AT+TTRCHANNEL=2**, Uplink Payload totals 18 bytes.
409 409  
410 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
411 -|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**
412 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
413 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
414 -Status1
416 +* (% style="color:blue" %)**TDC flag**
415 415  
416 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
418 +When the flag is 1, it means sending packets at normal time intervals.
419 +
420 +Otherwise, it is a packet sent at non-TDC time.
421 +
422 +
423 +* (((
424 +(% style="color:#0000ff" %)**Alarm**
425 +)))
426 +
427 +See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
428 +
429 +
430 +* (((
431 +(% style="color:blue" %)**Status**
432 +)))
433 +
434 +This bit is 1 when the door sensor is open and 0 when it is close.
435 +
436 +
437 +* (((
438 +(% style="color:blue" %)**Total open door events**
439 +)))
440 +
441 +Total pulse/counting base on open door.
442 +
443 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
444 +
445 +
446 +* (((
447 +(% style="color:blue" %)**The last door open duration**
448 +)))
449 +
450 +Door sensor last open duration.
451 +
452 +Unit: sec.
453 +
454 +[[image:image-20230701094042-1.png||height="154" width="763"]]
455 +
456 +
457 +**2) When (% style="color:blue" %)AT+TTRCHANNEL=2(%%), Uplink Payload totals (% style="color:blue" %)18 bytes(%%)**(% style="color:blue" %).
458 +
459 +(When the maximum DR of some frequencies is 11 bytes, it will cause the server to receive empty packets)
460 +
461 +(% style="color:red" %)**Note:When using the AT+TTRCHANNEL=2 command, the Datalog function cannot be used.**
462 +
463 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
464 +|=(% colspan="8" style="background-color:#D9E2F3;color:#0070C0; width: 515px;" %)**Real-Time Open/Close Status, FPORT=2**
465 +|(% style="width:50px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
466 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
467 +Status1 & Alarm1
417 417  )))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
418 418  The last door open duration1 (unit: sec)
419 419  )))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
420 -Status2
421 -
422 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
471 +Status2 & Alarm2
423 423  )))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
424 424  
425 425  **Status1 & Alarm1:**
426 426  
427 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:730px" %)
428 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:167px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:171px" %)**bit0**
429 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
476 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:514px" %)
477 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:117px" %)**bit0**
478 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:99px" %)(((
430 430  Count mod
431 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:167px" %)(((
432 -0: No Alarm; 1: Alarm
480 +)))|(% style="width:103px" %)TDC flag 0:No;1:Yes|(% style="width:216px" %)(((
481 +Alarm1 0: No Alarm; 1: Alarm (PA8 of pin)
482 +)))|(% style="width:181px" %)(((
483 +Status1 0: Close; 1: Open (PA8 of pin)
484 +)))
433 433  
434 -(PA8)
435 -)))|(% style="width:171px" %)(((
436 -Status 0: Close; 1:Open
486 +**Status2 & Alarm2:**
437 437  
438 -(PA8)
488 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
489 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**bit0**
490 +|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:219px" %)(((
491 +Alarm2 0: No Alarm; 1: Alarm (PA4 of pin)
492 +)))|(% style="width:181px" %)(((
493 +Status2 0: Close; 1: Open (PA4 of pin)
439 439  )))
440 440  
441 -**Status2 & Alarm2:**
496 +[[image:image-20230630155908-6.png||height="295" width="927"]]
442 442  
443 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:550px" %)
444 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:176px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:175px" %)**bit0**
445 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:176px" %)(((
446 -0: No Alarm; 1: Alarm
447 447  
448 -(PA4)
449 -)))|(% style="width:175px" %)(((
450 -Status 0: Close,;1:Open
499 +* (((
500 +(% style="color:blue" %)**Count mod:Default=0**
501 +)))
451 451  
452 -(PA4)
503 +0: Uplink total open door times since factory
504 +
505 +1: Uplink total open door times since last FPORT=2 uplink.
506 +
507 +
508 +* (% style="color:blue" %)**TDC flag**
509 +
510 +When the flag is 1, it means sending packets at normal time intervals.
511 +
512 +Otherwise, it is a packet sent at non-TDC time.
513 +
514 +
515 +* (((
516 +(% style="color:#0000ff" %)**Alarm1 or Alarm2**
453 453  )))
454 454  
455 -[[image:image-20230630155908-6.png||height="295" width="927"]]
519 +See [[Alarm Base on Timeout>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
456 456  
457 457  
522 +* (((
523 +(% style="color:blue" %)**Status1 **(% style="color:#0000ff" %)**or **(% style="color:blue" %)**Status2**
524 +)))
525 +
526 +This bit is 1 when the door sensor is open and 0 when it is close.
527 +
528 +
529 +* (((
530 +(% style="color:blue" %)**Total open door events1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** Total open door events2**
531 +)))
532 +
533 +Total pulse/counting base on open door.
534 +
535 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
536 +
537 +
538 +* (((
539 +(% style="color:blue" %)**The last door open duration1 **(% style="color:#0000ff" %)**or**(% style="color:blue" %)** The last door open duration2**
540 +)))
541 +
542 +Door sensor last open duration.
543 +
544 +Unit: sec.
545 +
546 +[[image:image-20230701094042-1.png||height="154" width="763"]]
547 +
548 +
458 458  === 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
459 459  
460 460  
... ... @@ -462,13 +462,11 @@
462 462  
463 463  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
464 464  
465 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
556 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
466 466  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
467 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
558 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:80px" %)**1**|(% style="width:120px" %)**3**|(% style="width:150px" %)**3**|(% style="width:90px" %)**4**
468 468  |(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
469 -Status
470 -
471 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
560 +Status & [[Alarm>>||anchor="H3.3.3A0AlarmBaseonTimeout"]]
472 472  )))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
473 473  The last door open duration (unit: sec)
474 474  )))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
... ... @@ -475,22 +475,20 @@
475 475  
476 476  **Status & Alarm:**
477 477  
478 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
479 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
567 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
568 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:65px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:75px" %)**bit0**
480 480  |(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
481 481  Count mod
482 -)))|(% style="width:95px" %)TDC flag 0:No;1:Yes|(% style="width:116px" %)(((
483 -0: No Alarm;
484 -
485 -1: Alarm
571 +)))|(% style="width:95px" %)(((
572 +TDC flag 0:No; 1:Yes
573 +)))|(% style="width:116px" %)(((
574 +Alarm 0: No Alarm; 1: Alarm
486 486  )))|(% style="width:112px" %)(((
487 -Status 0:Close;
488 -
489 -1: Open
576 +Status 0:Close; 1: Open
490 490  )))
491 491  
492 492  * (((
493 -Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
580 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.3A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
494 494  )))
495 495  
496 496  For example, in the US915 band, the max payload for different DR is:
... ... @@ -527,7 +527,7 @@
527 527  
528 528  **Parsed Value:**
529 529  
530 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, DOOR_OPEN_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
617 +[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
531 531  
532 532  
533 533  [SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
... ... @@ -671,6 +671,7 @@
671 671  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
672 672  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
673 673  
761 +
674 674  == 3.2 General Commands ==
675 675  
676 676  
... ... @@ -718,15 +718,47 @@
718 718  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
719 719  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
720 720  
721 -=== 3.3.2  Enable / Disable Alarm ===
722 722  
810 +=== 3.3.2  Set Power Output Duration ===
723 723  
812 +
813 +Control the output duration 5V . Before each sampling, device will
814 +
815 +~1. first enable the power output to external sensor,
816 +
817 +2. keep it on as per duration, read sensor value and construct uplink payload
818 +
819 +3. final, close the power output.
820 +
821 +(% style="color:blue" %)**AT Command: AT+5VT**
822 +
823 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
824 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 204px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 149px;" %)**Response**
825 +|(% style="width:156px" %)AT+5VT=?|(% style="width:204px" %)Show 5V open time.|(% style="width:149px" %)0 (default)
826 +OK
827 +|(% style="width:156px" %)AT+5VT=500|(% style="width:204px" %)Close after a delay of 500 milliseconds.|(% style="width:149px" %)(((
828 +OK
829 +
830 +)))
831 +
832 +(% style="color:blue" %)**Downlink Command: 0x07**(%%)
833 +Format: Command Code (0x07) followed by 2 bytes.
834 +
835 +The first and second bytes are the time to turn on.
836 +
837 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
838 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
839 +
840 +
841 +=== 3.3.3  Enable / Disable Alarm ===
842 +
843 +
724 724  Feature: Enable/Disable Alarm for open/close event. Default value 0.
725 725  
726 726  (% style="color:blue" %)**AT Command: **
727 727  
728 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
729 -|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
848 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
849 +|(% style="background-color:#d9e2f3; color:#0070c0; width:153px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:276px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:86px" %)**Response**
730 730  |(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
731 731  |(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
732 732  
... ... @@ -737,12 +737,11 @@
737 737  0xA7 00  ~/~/ Same As AT+DISALARM=0
738 738  
739 739  
740 -=== 3.3.3  Alarm Base on Timeout ===
860 +=== 3.3.4  Alarm Base on Timeout ===
741 741  
742 742  
743 743  DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
744 744  
745 -
746 746  * (((
747 747  (% style="color:blue" %)**Keep Status: Status to be monitor**
748 748  )))
... ... @@ -778,7 +778,7 @@
778 778  **cc dd:** timeout.
779 779  
780 780  
781 -1)**AT+TTRIG1**:(PA8 of pin)
900 +**1) AT+TTRIG1 : (PA8 of pin)**
782 782  
783 783  (% style="color:blue" %)**AT Command to configure:**
784 784  
... ... @@ -797,13 +797,11 @@
797 797  
798 798  (% style="color:blue" %)**Downlink Command to configure:**
799 799  
800 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
919 +If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 **or** 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
801 801  
802 - 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
803 803  
922 +**2) AT+TTRIG2 : (PA4 of pin,need to use AT+TTRCHANNEL=2)**
804 804  
805 -2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
806 -
807 807  (% style="color:blue" %)**AT Command to configure:**
808 808  
809 809  * (((
... ... @@ -821,14 +821,12 @@
821 821  
822 822  (% style="color:blue" %)**Downlink Command to configure:**
823 823  
824 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
941 +If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30  **or**  0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
825 825  
826 - 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
827 827  
944 +=== 3.3.5  TTRIG1 & TTRIG2 timeout status alarm ===
828 828  
829 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
830 830  
831 -
832 832  It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
833 833  
834 834  (% style="color:blue" %)**AT Command:**
... ... @@ -855,7 +855,7 @@
855 855  Example:  0C aa  => AT+TTRALARM= aa
856 856  
857 857  
858 -=== 3.3.5  Count Mod ===
973 +=== 3.3.6  Count Mod ===
859 859  
860 860  
861 861  Feature: Manually set the count mode.
... ... @@ -862,8 +862,8 @@
862 862  
863 863  (% style="color:blue" %)**AT Command:**
864 864  
865 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
866 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
980 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
981 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 275px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 86px;background-color:#D9E2F3;color:#0070C0" %)**Response**
867 867  |(% style="width:155px" %)(((
868 868  AT+COUNTMOD=0
869 869  )))|(% style="width:277px" %)(((
... ... @@ -874,7 +874,7 @@
874 874  |(% style="width:155px" %)(((
875 875  AT+COUNTMOD=1
876 876  )))|(% style="width:277px" %)(((
877 -the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
992 +the count value will be reset after each TDC time(Last Close Duration Reset after each uplink)
878 878  )))|(% style="width:86px" %)(((
879 879  OK
880 880  )))
... ... @@ -884,7 +884,7 @@
884 884  Example:  0B aa  => AT+COUNTMOD = second byte
885 885  
886 886  
887 -=== 3.3.6  Number of channel of door sensors ===
1002 +=== 3.3.7  Number of channel of door sensors ===
888 888  
889 889  
890 890  Feature: Set the number of door sensor channels.
... ... @@ -892,7 +892,7 @@
892 892  (% style="color:blue" %)**AT Command:**
893 893  
894 894  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
895 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1010 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
896 896  |(% style="width:155px" %)(((
897 897  AT+TTRCHANNEL=1
898 898  )))|(% style="width:259px" %)(((
... ... @@ -913,7 +913,7 @@
913 913  Example:  0D aa => AT+TTRCHANNEL = second byte
914 914  
915 915  
916 -=== 3.3.7  Set Time Sync Mode ===
1031 +=== 3.3.8  Set Time Sync Mode ===
917 917  
918 918  
919 919  Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
... ... @@ -923,7 +923,7 @@
923 923  (% style="color:blue" %)**AT Command:**
924 924  
925 925  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
926 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1041 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
927 927  |(% style="width:155px" %)(((
928 928  AT+SYNCMOD=1
929 929  )))|(% style="width:259px" %)(((
... ... @@ -951,41 +951,41 @@
951 951  0x28 00  ~/~/ Same As AT+SYNCMOD=0
952 952  
953 953  
954 -=== 3.3.8  Clear the door open count and the duration of the last door open ===
1069 +=== 3.3.9  Clear the open door times and the duration of the last open door ===
955 955  
956 956  
957 957  (% style="color:blue" %)**AT Command:**
958 958  
959 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
960 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
961 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the leak count and the duration of the last leak.|(% style="width:44px" %)(((
1074 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1075 +|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 290px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1076 +|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
962 962  OK
963 963  )))
964 964  
965 965  (% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
966 966  
967 -The sensor will clear the door open count and the duration of the last door open.
1082 +The sensor will clear the open door times and the duration of the last open door.
968 968  
969 969  
970 -=== 3.3.9  Set the count value of the number of door open ===
1085 +=== 3.3.10  Set the count value of the number of open door ===
971 971  
972 972  
973 973  (% style="color:blue" %)**AT Command:**
974 974  
975 975  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
976 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1091 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
977 977  |(% style="width:155px" %)(((
978 978  AT+SETCNT=1,100
979 979  )))|(% style="width:259px" %)(((
980 -Set the door open times of PA8 pin to 100 times.
1095 +Set the open door times of PA8 pin to 100 times.
981 981  )))|(% style="width:44px" %)(((
982 982  OK
983 983  )))
984 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the door open times of PA8 pin.|(% style="width:44px" %)OK
1099 +|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
985 985  |(% style="width:155px" %)(((
986 986  AT+SETCNT=2,50
987 987  )))|(% style="width:259px" %)(((
988 -Set the door open times of PA4 pin to 100 times.
1103 +Set the open door times of PA4 pin to 100 times.
989 989  )))|(% style="width:44px" %)(((
990 990  OK
991 991  )))
... ... @@ -1018,12 +1018,12 @@
1018 1018  
1019 1019  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1020 1020  
1136 +Methods to Update Firmware:
1021 1021  
1022 -**Methods to Update Firmware:**
1023 -
1024 1024  * (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1025 1025  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1026 1026  
1141 +
1027 1027  = 6. FAQ =
1028 1028  
1029 1029  
... ... @@ -1051,6 +1051,7 @@
1051 1051  
1052 1052  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1053 1053  
1169 +
1054 1054  = 8. ​Packing Info =
1055 1055  
1056 1056  
... ... @@ -1068,6 +1068,7 @@
1068 1068  
1069 1069  * Weight / pcs : g
1070 1070  
1187 +
1071 1071  = 9. Support =
1072 1072  
1073 1073