Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 29.1 >
edited by Saxer Lin
on 2023/07/01 09:14
To version < 16.1 >
edited by Saxer Lin
on 2023/06/30 15:55
>
Change comment: Uploaded new attachment "image-20230630155556-4.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -71,6 +71,8 @@
71 71  * Wall Mountable
72 72  * Outdoor Use
73 73  
74 +
75 +
74 74  == 1.3 Specification ==
75 75  
76 76  
... ... @@ -104,6 +104,8 @@
104 104  * Sleep Mode: 5uA @ 3.3v
105 105  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
106 106  
109 +
110 +
107 107  == 1.4 Applications ==
108 108  
109 109  
... ... @@ -137,6 +137,8 @@
137 137  )))
138 138  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
139 139  
144 +
145 +
140 140  == 1.7 BLE connection ==
141 141  
142 142  
... ... @@ -152,13 +152,9 @@
152 152  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
153 153  
154 154  
155 -== 1.8 Pin Definitions ==
161 +== 1.8 Mechanical ==
156 156  
157 -[[image:image-20230630160843-7.png]]
158 158  
159 -== 1.9 Mechanical ==
160 -
161 -
162 162  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
163 163  
164 164  
... ... @@ -176,7 +176,7 @@
176 176  == 2.1 How it works ==
177 177  
178 178  
179 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
181 +The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
180 180  
181 181  
182 182  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -248,7 +248,7 @@
248 248  
249 249  Example parse in TTNv3
250 250  
251 -[[image:image-20230630155406-1.png||height="190" width="873"]]
253 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609104802-1.png?rev=1.1||alt="image-20220609104802-1.png" height="393" width="1195"]]
252 252  
253 253  
254 254  (% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
... ... @@ -304,191 +304,44 @@
304 304  Ex2: 0x0B49 = 2889mV
305 305  
306 306  
307 -=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
309 +=== 2.3.2  Real-Time Open/Close Status, Uplink FPORT~=2 ===
308 308  
309 309  
310 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
311 -
312 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:723px" %)
313 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:721px" %)**Sensor Configuration FPORT=4**
314 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:99px" %)**2**|(% style="width:87px" %)**1**|(% style="width:97px" %)**2**|(% style="width:98px" %)**1**
315 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
316 -Keep status1
317 -
318 -
319 -)))|(% style="width:99px" %)(((
320 -Keep time1
321 -
322 -(unit: sec)
323 -)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
324 -Keep time2
325 -
326 -(unit: sec)
327 -)))|(% style="width:98px" %)(((
328 -Alarm interval
329 -
330 -(unit: min)
331 -)))
332 -
333 -* (((
334 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
335 -)))
336 -
337 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
338 -
339 -
340 -* (((
341 -(% style="color:blue" %)**Disalarm: (default: 0)**
342 -)))
343 -
344 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
345 -
346 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
347 -
348 -
349 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
350 -
351 -
352 -* (((
353 -(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
354 -)))
355 -
356 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
357 -
358 -[[image:image-20230630155527-3.png||height="146" width="902"]]
359 -
360 -
361 -* (((
362 -(% style="color:blue" %)**Alarm interval(default: 0)**
363 -)))
364 -
365 -When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
366 -
367 -
368 -=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
369 -
370 -
371 371  DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
372 372  
373 373  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
374 374  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
375 375  
376 -1)When **AT+TTRCHANNEL=1**, Uplink Payload totals 11 bytes. (**Default mode**)
317 +Uplink Payload totals 11 bytes.
377 377  
378 378  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
379 379  |=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
380 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
381 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
382 -Status
383 -
384 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
385 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
386 -The last door open duration (unit: sec)
321 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:77px" %)**1**|(% style="width:97px" %)**3**|(% style="width:143px" %)**3**|(% style="width:107px" %)**4**
322 +|(% style="width:95px" %)**Value**|(% style="width:78px" %)Status & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]|(% style="width:98px" %)Total open door events|(% style="width:144px" %)(((
323 +The last door open duration (unit: min)
387 387  )))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
388 388  
389 389  **Status & Alarm:**
390 390  
391 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:645px" %)
392 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:125px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit0**
393 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
394 -Count mod
395 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:125px" %)(((
396 -0: No Alarm;
328 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
329 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**[bit5:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit0**
330 +|(% style="width:76px" %)**Value**|(% style="width:79px" %)(((
331 +No ACK Message
332 +)))|(% style="width:84px" %)(((
333 +Poll Message Flag
334 +)))|(% style="width:96px" %)Reserve|(% style="width:197px" %)[[Enable/disable Timeout Alarm>>||anchor="H3.3.3A0Enable2FDisableAlarm"]]
335 +0: No Alarm; 1: Alarm|(% style="width:104px" %)Status 0: Close, 1: Open
397 397  
398 -1: Alarm
399 -)))|(% style="width:129px" %)(((
400 -Status 0: Close;
337 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110547-6.png?width=1191&height=337&rev=1.1||alt="image-20220609110547-6.png" height="337" width="1191"]]
401 401  
402 -1: Open
403 -)))
404 404  
405 -[[image:image-20230630155451-2.png||height="246" width="928"]]
340 +=== 2.3.3  Historical Door Open/Close Event, FPORT~=3 ===
406 406  
407 407  
408 -2)When **AT+TTRCHANNEL=2**, Uplink Payload totals 18 bytes.
409 -
410 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
411 -|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**
412 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
413 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
414 -Status1
415 -
416 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
417 -)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
418 -The last door open duration1 (unit: sec)
419 -)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
420 -Status2
421 -
422 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
423 -)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
424 -
425 -**Status1 & Alarm1:**
426 -
427 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:730px" %)
428 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:167px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:171px" %)**bit0**
429 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
430 -Count mod
431 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:167px" %)(((
432 -0: No Alarm; 1: Alarm
433 -
434 -(PA8)
435 -)))|(% style="width:171px" %)(((
436 -Status 0: Close; 1:Open
437 -
438 -(PA8)
439 -)))
440 -
441 -**Status2 & Alarm2:**
442 -
443 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:550px" %)
444 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:176px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:175px" %)**bit0**
445 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:176px" %)(((
446 -0: No Alarm; 1: Alarm
447 -
448 -(PA4)
449 -)))|(% style="width:175px" %)(((
450 -Status 0: Close,;1:Open
451 -
452 -(PA4)
453 -)))
454 -
455 -[[image:image-20230630155908-6.png||height="295" width="927"]]
456 -
457 -
458 -=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
459 -
460 -
461 461  DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
462 462  
463 463  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
464 464  
465 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
466 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
467 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
468 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
469 -Status
470 -
471 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
472 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
473 -The last door open duration (unit: sec)
474 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
475 -
476 -**Status & Alarm:**
477 -
478 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
479 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
480 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
481 -Count mod
482 -)))|(% style="width:95px" %)TDC flag 0:No;1:Yes|(% style="width:116px" %)(((
483 -0: No Alarm;
484 -
485 -1: Alarm
486 -)))|(% style="width:112px" %)(((
487 -Status 0:Close;
488 -
489 -1: Open
490 -)))
491 -
492 492  * (((
493 493  Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
494 494  )))
... ... @@ -513,40 +513,82 @@
513 513  
514 514  If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
515 515  
516 -[[image:image-20230630155556-4.png||height="146" width="938"]]
371 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609112215-7.png?width=1250&height=277&rev=1.1||alt="image-20220609112215-7.png" height="277" width="1250"]]
517 517  
518 518  **Downlink:**
519 519  
520 -0x31 64 9E 7D 34 64 9E 7E 9C 05
375 +0x31 61 8E 57 40 61 8E 81 70 05
521 521  
522 522  
523 523  **Uplink:**
524 524  
525 -45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
380 +00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50
526 526  
527 527  
528 528  **Parsed Value:**
529 529  
530 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, DOOR_OPEN_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
385 +[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]
531 531  
532 532  
533 -[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
388 +[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],
534 534  
535 -[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
390 +[FALSE, OPEN,  1, 0, 2021-11-12 12:36:34],
536 536  
537 -[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
392 +[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],
538 538  
539 -[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
394 +[FALSE, OPEN,  2, 2, 2021-11-12 12:39:17],
540 540  
541 -[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
396 +[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],
542 542  
543 -[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
398 +[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],
544 544  
545 -[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
400 +[FALSE, OPEN,  3, 1, 2021-11-12 14:50:32],
546 546  
547 -[[image:image-20230630172740-1.png||height="199" width="868"]]
402 +[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],
548 548  
404 +[FALSE, OPEN,  4, 2, 2021-11-12 14:58:35],
549 549  
406 +[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],
407 +
408 +
409 +=== 2.3.4  Sensor Configuration, FPORT~=4 ===
410 +
411 +
412 +DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
413 +
414 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
415 +|(% colspan="5" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
416 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**
417 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: min)
418 +
419 +* (((
420 +(% style="color:blue" %)**TDC: (default: 0x001C20)**
421 +)))
422 +
423 +Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
424 +
425 +
426 +* (((
427 +(% style="color:blue" %)**Disalarm: (default: 0)**
428 +)))
429 +
430 + **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
431 +
432 + **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
433 +
434 +
435 +(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
436 +
437 +
438 +* (((
439 +(% style="color:blue" %)**Keep Status & Keep Time**
440 +)))
441 +
442 +Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
443 +
444 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110018-4.png?width=1159&height=291&rev=1.1||alt="image-20220609110018-4.png" height="291" width="1159"]]
445 +
446 +
550 550  == 2.4 Payload Decoder file ==
551 551  
552 552  
... ... @@ -564,9 +564,7 @@
564 564  
565 565  (% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
566 566  
567 -(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
568 568  
569 -
570 570  === 2.5.1 Ways to get datalog via LoRaWAN ===
571 571  
572 572  
... ... @@ -671,6 +671,8 @@
671 671  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
672 672  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
673 673  
569 +
570 +
674 674  == 3.2 General Commands ==
675 675  
676 676  
... ... @@ -690,7 +690,7 @@
690 690  These commands only valid for DS03A-LB, as below:
691 691  
692 692  
693 -=== 3.3.1  Set Transmit Interval Time ===
590 +=== 3.3.1 Set Transmit Interval Time ===
694 694  
695 695  
696 696  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -718,9 +718,21 @@
718 718  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
719 719  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
720 720  
721 -=== 3.3.2  Enable / Disable Alarm ===
722 722  
723 723  
620 +=== 3.3.2 Get Device Status ===
621 +
622 +
623 +Send a LoRaWAN downlink to ask device send Alarm settings.
624 +
625 +* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
626 +
627 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
628 +
629 +
630 +=== 3.3.3  Enable / Disable Alarm ===
631 +
632 +
724 724  Feature: Enable/Disable Alarm for open/close event. Default value 0.
725 725  
726 726  (% style="color:blue" %)**AT Command: **
... ... @@ -737,7 +737,7 @@
737 737  0xA7 00  ~/~/ Same As AT+DISALARM=0
738 738  
739 739  
740 -=== 3.3.3  Alarm Base on Timeout ===
649 +=== 3.3.4  Alarm Base on Timeout ===
741 741  
742 742  
743 743  DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
... ... @@ -763,103 +763,37 @@
763 763  If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
764 764  
765 765  
766 -* (((
767 -(% style="color:blue" %)**Downlink Command**
768 -)))
769 -
770 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
771 -
772 -**A9:** Command Type Code
773 -
774 -**aa: **01:TTRIG1; 02:TTRIG2
775 -
776 -**bb:** status to be monitored
777 -
778 -**cc dd:** timeout.
779 -
780 -
781 -1)**AT+TTRIG1**:(PA8 of pin)
782 -
783 783  (% style="color:blue" %)**AT Command to configure:**
784 784  
785 785  * (((
786 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
787 -
788 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
678 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
789 789  )))
790 790  
791 791  * (((
792 -(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
793 -
794 -
795 -
682 +(% style="color:#037691" %)**AT+TTRIG=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
796 796  )))
797 797  
798 798  (% style="color:blue" %)**Downlink Command to configure:**
799 799  
800 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
687 +(% style="color:#037691" %)**Command: 0xA9 aa bb cc**
801 801  
802 - 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
689 +**A9:** Command Type Code
803 803  
691 +**aa:** status to be monitored
804 804  
805 -2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
693 +**bb cc:** timeout.
806 806  
807 -(% style="color:blue" %)**AT Command to configure:**
808 808  
809 -* (((
810 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
696 +If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
811 811  
812 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
813 -)))
698 +Or
814 814  
815 -* (((
816 -(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
700 +0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
817 817  
818 818  
819 -
820 -)))
821 -
822 -(% style="color:blue" %)**Downlink Command to configure:**
823 -
824 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
825 -
826 - 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
827 -
828 -
829 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
830 -
831 -
832 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
833 -
834 -(% style="color:blue" %)**AT Command:**
835 -
836 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
837 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
838 -|(% style="width:155px" %)(((
839 -AT+TTRALARM=0
840 -)))|(% style="width:279px" %)(((
841 -disable continuous alarm
842 -)))|(% style="width:84px" %)(((
843 -OK
844 -)))
845 -|(% style="width:155px" %)(((
846 -AT+TTRALARM=60
847 -)))|(% style="width:279px" %)(((
848 -The alarm interval is 60 minutes (unit: minutes)
849 -)))|(% style="width:84px" %)(((
850 -OK
851 -)))
852 -
853 -(% style="color:blue" %)**Downlink Command:**
854 -
855 -Example:  0C aa  => AT+TTRALARM= aa
856 -
857 -
858 858  === 3.3.5  Count Mod ===
859 859  
860 860  
861 -Feature: Manually set the count mode.
862 -
863 863  (% style="color:blue" %)**AT Command:**
864 864  
865 865  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
... ... @@ -884,26 +884,24 @@
884 884  Example:  0B aa  => AT+COUNTMOD = second byte
885 885  
886 886  
887 -=== 3.3.6  Number of channel of door sensors ===
730 +=== 3.3.6  Interrupt Pin Channel Mod ===
888 888  
889 889  
890 -Feature: Set the number of door sensor channels.
891 -
892 892  (% style="color:blue" %)**AT Command:**
893 893  
894 894  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
895 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
736 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
896 896  |(% style="width:155px" %)(((
897 897  AT+TTRCHANNEL=1
898 -)))|(% style="width:259px" %)(((
899 -Set as single channel, only use PA8 pin as interrupt pin.
739 +)))|(% style="width:288px" %)(((
740 +set as single channel, only use PA8 pin as interrupt pin.
900 900  )))|(% style="width:44px" %)(((
901 901  OK
902 902  )))
903 903  |(% style="width:155px" %)(((
904 904  AT+TTRCHANNEL=2
905 -)))|(% style="width:259px" %)(((
906 -Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
746 +)))|(% style="width:288px" %)(((
747 +is set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
907 907  )))|(% style="width:44px" %)(((
908 908  OK
909 909  )))
... ... @@ -913,92 +913,51 @@
913 913  Example:  0D aa => AT+TTRCHANNEL = second byte
914 914  
915 915  
916 -=== 3.3.7  Set Time Sync Mode ===
757 +=== 3.3.7  Change the name of AT+TTRIG to AT+TTRIG1 ===
917 917  
918 918  
919 -Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
920 -
921 -SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
922 -
923 -(% style="color:blue" %)**AT Command:**
924 -
925 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
926 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
927 -|(% style="width:155px" %)(((
928 -AT+SYNCMOD=1
929 -)))|(% style="width:259px" %)(((
930 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
931 -)))|(% style="width:44px" %)(((
932 -OK
933 -)))
934 -|(% style="width:155px" %)(((
935 -AT+SYNCMOD=1,8
936 -)))|(% style="width:259px" %)(((
937 -Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
938 -)))|(% style="width:44px" %)(((
939 -OK
940 -)))
941 -|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
942 -
943 943  (% style="color:blue" %)**Downlink Command:**
944 944  
945 -0x28 01  ~/~/ Same As AT+SYNCMOD=1
762 +Example:  A9 01 aa bb cc  => AT+TTRIG1= third byte, 4th byte and 5th byte
946 946  
947 -0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
948 948  
949 -0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
765 +=== 3.3.8  Added AT+TTRIG2 for PB15 pin ===
950 950  
951 -0x28 00  ~/~/ Same As AT+SYNCMOD=0
952 952  
768 +(% style="color:blue" %)**Downlink Command:**
953 953  
954 -=== 3.3.8  Clear the door open count and the duration of the last door open ===
770 +Example: A9 02 aa bb cc  => AT+TTRIG2= third byte, 4th byte and 5th byte
955 955  
956 956  
957 -(% style="color:blue" %)**AT Command:**
773 +=== 3.3.9  TTRIG1/2 timeout status alarm ===
958 958  
959 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
960 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
961 -|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the leak count and the duration of the last leak.|(% style="width:44px" %)(((
962 -OK
963 -)))
964 964  
965 -(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
776 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
966 966  
967 -The sensor will clear the door open count and the duration of the last door open.
968 -
969 -
970 -=== 3.3.9  Set the count value of the number of door open ===
971 -
972 -
973 973  (% style="color:blue" %)**AT Command:**
974 974  
975 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
976 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
780 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
781 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
977 977  |(% style="width:155px" %)(((
978 -AT+SETCNT=1,100
979 -)))|(% style="width:259px" %)(((
980 -Set the door open times of PA8 pin to 100 times.
981 -)))|(% style="width:44px" %)(((
783 +AT+TTRALARM=0
784 +)))|(% style="width:279px" %)(((
785 +disable continuous alarm
786 +)))|(% style="width:84px" %)(((
982 982  OK
983 983  )))
984 -|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the door open times of PA8 pin.|(% style="width:44px" %)OK
985 985  |(% style="width:155px" %)(((
986 -AT+SETCNT=2,50
987 -)))|(% style="width:259px" %)(((
988 -Set the door open times of PA4 pin to 100 times.
989 -)))|(% style="width:44px" %)(((
790 +AT+TTRALARM=60
791 +)))|(% style="width:279px" %)(((
792 +The alarm interval is 60 minutes (unit: minutes)
793 +)))|(% style="width:84px" %)(((
990 990  OK
991 991  )))
992 992  
993 993  (% style="color:blue" %)**Downlink Command:**
994 994  
995 -0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
799 +Example:  0C aa  => AT+TTRALARM= aa
996 996  
997 -0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
998 998  
999 -0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1000 -
1001 -
1002 1002  = 4. Battery & Power Consumption =
1003 1003  
1004 1004  
... ... @@ -1024,6 +1024,8 @@
1024 1024  * (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1025 1025  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1026 1026  
827 +
828 +
1027 1027  = 6. FAQ =
1028 1028  
1029 1029  
... ... @@ -1051,6 +1051,8 @@
1051 1051  
1052 1052  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1053 1053  
856 +
857 +
1054 1054  = 8. ​Packing Info =
1055 1055  
1056 1056  
... ... @@ -1068,6 +1068,8 @@
1068 1068  
1069 1069  * Weight / pcs : g
1070 1070  
875 +
876 +
1071 1071  = 9. Support =
1072 1072  
1073 1073  
image-20230630155751-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -511.7 KB
Content
image-20230630172740-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0