Last modified by Mengting Qiu on 2025/01/10 09:53
<
From version < 27.1 >
edited by Saxer Lin
on 2023/06/30 18:00
To version < 12.1 >
edited by Ellie Zhang
on 2023/06/26 09:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Ellie
Content
... ... @@ -140,7 +140,7 @@
140 140  == 1.7 BLE connection ==
141 141  
142 142  
143 -DS03A-LB support BLE remote configure.
143 +D2x-LB support BLE remote configure.
144 144  
145 145  
146 146  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -152,13 +152,9 @@
152 152  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
153 153  
154 154  
155 -== 1.8 Pin Definitions ==
155 +== 1.8 Mechanical ==
156 156  
157 -[[image:image-20230630160843-7.png]]
158 158  
159 -== 1.9 Mechanical ==
160 -
161 -
162 162  [[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
163 163  
164 164  
... ... @@ -176,7 +176,7 @@
176 176  == 2.1 How it works ==
177 177  
178 178  
179 -The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
175 +The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
180 180  
181 181  
182 182  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -184,7 +184,7 @@
184 184  
185 185  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
186 186  
187 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
183 +The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
188 188  
189 189  [[image:image-20230522092858-1.png||height="391" width="874"]]
190 190  
... ... @@ -248,7 +248,7 @@
248 248  
249 249  Example parse in TTNv3
250 250  
251 -[[image:image-20230630155406-1.png||height="190" width="873"]]
247 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609104802-1.png?rev=1.1||alt="image-20220609104802-1.png" height="393" width="1195"]]
252 252  
253 253  
254 254  (% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
... ... @@ -257,33 +257,33 @@
257 257  
258 258  (% style="color:#037691" %)**Frequency Band**:
259 259  
260 -0x01: EU868
256 +*0x01: EU868
261 261  
262 -0x02: US915
258 +*0x02: US915
263 263  
264 -0x03: IN865
260 +*0x03: IN865
265 265  
266 -0x04: AU915
262 +*0x04: AU915
267 267  
268 -0x05: KZ865
264 +*0x05: KZ865
269 269  
270 -0x06: RU864
266 +*0x06: RU864
271 271  
272 -0x07: AS923
268 +*0x07: AS923
273 273  
274 -0x08: AS923-1
270 +*0x08: AS923-1
275 275  
276 -0x09: AS923-2
272 +*0x09: AS923-2
277 277  
278 -0x0a: AS923-3
274 +*0x0a: AS923-3
279 279  
280 -0x0b: CN470
276 +*0x0b: CN470
281 281  
282 -0x0c: EU433
278 +*0x0c: EU433
283 283  
284 -0x0d: KR920
280 +*0x0d: KR920
285 285  
286 -0x0e: MA869
282 +*0x0e: MA869
287 287  
288 288  
289 289  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -304,191 +304,44 @@
304 304  Ex2: 0x0B49 = 2889mV
305 305  
306 306  
307 -=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
303 +=== 2.3.2  Real-Time Open/Close Status, Uplink FPORT~=2 ===
308 308  
309 309  
310 -DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
311 -
312 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:723px" %)
313 -|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:721px" %)**Sensor Configuration FPORT=4**
314 -|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:99px" %)**2**|(% style="width:87px" %)**1**|(% style="width:97px" %)**2**|(% style="width:98px" %)**1**
315 -|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
316 -Keep status1
317 -
318 -
319 -)))|(% style="width:99px" %)(((
320 -Keep time1
321 -
322 -(unit: sec)
323 -)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
324 -Keep time2
325 -
326 -(unit: sec)
327 -)))|(% style="width:98px" %)(((
328 -Alarm interval
329 -
330 -(unit: min)
331 -)))
332 -
333 -* (((
334 -(% style="color:blue" %)**TDC: (default: 0x001C20)**
335 -)))
336 -
337 -Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
338 -
339 -
340 -* (((
341 -(% style="color:blue" %)**Disalarm: (default: 0)**
342 -)))
343 -
344 - **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
345 -
346 - **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
347 -
348 -
349 -(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
350 -
351 -
352 -* (((
353 -(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
354 -)))
355 -
356 -Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
357 -
358 -[[image:image-20230630155527-3.png||height="146" width="902"]]
359 -
360 -
361 -* (((
362 -(% style="color:blue" %)**Alarm interval(default: 0)**
363 -)))
364 -
365 -When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
366 -
367 -
368 -=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
369 -
370 -
371 371  DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
372 372  
373 373  * Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
374 374  * There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
375 375  
376 -1)When **AT+TTRCHANNEL=1**, Uplink Payload totals 11 bytes. (**Default mode**)
311 +Uplink Payload totals 11 bytes.
377 377  
378 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
379 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
380 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
381 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
382 -Status
383 -
384 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
385 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
386 -The last door open duration (unit: sec)
313 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
314 +|=(% colspan="5" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 522px;" %)**Real-Time Open/Close Status, FPORT=2**
315 +|(% style="width:95px" %)**Size(bytes)**|(% style="width:78px" %)**1**|(% style="width:98px" %)**3**|(% style="width:144px" %)**3**|(% style="width:108px" %)**4**
316 +|(% style="width:95px" %)**Value**|(% style="width:78px" %)Status & [[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]|(% style="width:98px" %)Total open door events|(% style="width:144px" %)(((
317 +The last door open duration (unit: min)
387 387  )))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
388 388  
389 389  **Status & Alarm:**
390 390  
391 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:645px" %)
392 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:125px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit0**
393 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
394 -Count mod
395 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:125px" %)(((
396 -0: No Alarm;
322 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
323 +|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**[bit5:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit0**
324 +|(% style="width:76px" %)**Value**|(% style="width:79px" %)(((
325 +No ACK Message
326 +)))|(% style="width:84px" %)(((
327 +Poll Message Flag
328 +)))|(% style="width:96px" %)Reserve|(% style="width:197px" %)[[Enable/disable Timeout Alarm>>||anchor="H3.3.3A0Enable2FDisableAlarm"]]
329 +0: No Alarm; 1: Alarm|(% style="width:104px" %)Status 0: Close, 1: Open
397 397  
398 -1: Alarm
399 -)))|(% style="width:129px" %)(((
400 -Status 0: Close;
331 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110547-6.png?width=1191&height=337&rev=1.1||alt="image-20220609110547-6.png" height="337" width="1191"]]
401 401  
402 -1: Open
403 -)))
404 404  
405 -[[image:image-20230630155451-2.png||height="246" width="928"]]
334 +=== 2.3.3  Historical Door Open/Close Event, FPORT~=3 ===
406 406  
407 407  
408 -2)When **AT+TTRCHANNEL=2**, Uplink Payload totals 18 bytes.
409 -
410 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
411 -|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**
412 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
413 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
414 -Status1
415 -
416 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
417 -)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
418 -The last door open duration1 (unit: sec)
419 -)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
420 -Status2
421 -
422 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
423 -)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
424 -
425 -**Status1 & Alarm1:**
426 -
427 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:730px" %)
428 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:167px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:171px" %)**bit0**
429 -|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
430 -Count mod
431 -)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:167px" %)(((
432 -0: No Alarm; 1: Alarm
433 -
434 -(PA8)
435 -)))|(% style="width:171px" %)(((
436 -Status 0: Close; 1:Open
437 -
438 -(PA8)
439 -)))
440 -
441 -**Status2 & Alarm2:**
442 -
443 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:550px" %)
444 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:176px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:175px" %)**bit0**
445 -|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:176px" %)(((
446 -0: No Alarm; 1: Alarm
447 -
448 -(PA4)
449 -)))|(% style="width:175px" %)(((
450 -Status 0: Close,;1:Open
451 -
452 -(PA4)
453 -)))
454 -
455 -[[image:image-20230630155908-6.png||height="295" width="927"]]
456 -
457 -
458 -=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
459 -
460 -
461 461  DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
462 462  
463 463  The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
464 464  
465 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
466 -|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
467 -|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
468 -|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
469 -Status
470 -
471 -&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
472 -)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
473 -The last door open duration (unit: sec)
474 -)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
475 -
476 -**Status & Alarm:**
477 -
478 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
479 -|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
480 -|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
481 -Count mod
482 -)))|(% style="width:95px" %)TDC flag 0:No;1:Yes|(% style="width:116px" %)(((
483 -0: No Alarm;
484 -
485 -1: Alarm
486 -)))|(% style="width:112px" %)(((
487 -Status 0:Close;
488 -
489 -1: Open
490 -)))
491 -
492 492  * (((
493 493  Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
494 494  )))
... ... @@ -513,40 +513,82 @@
513 513  
514 514  If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
515 515  
516 -[[image:image-20230630155556-4.png||height="146" width="938"]]
365 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609112215-7.png?width=1250&height=277&rev=1.1||alt="image-20220609112215-7.png" height="277" width="1250"]]
517 517  
518 518  **Downlink:**
519 519  
520 -0x31 64 9E 7D 34 64 9E 7E 9C 05
369 +0x31 61 8E 57 40 61 8E 81 70 05
521 521  
522 522  
523 523  **Uplink:**
524 524  
525 -45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
374 +00 00 00 00 00 00 00 61 8E 5F 8F 01 00 00 01 00 00 00 61 8E 5F D2 00 00 00 01 00 00 02 61 8E 60 64 01 00 00 02 00 00 02 61 8E 60 75 00 00 00 02 00 00 01 61 8E 60 C6 00 00 00 02 00 00 01 61 8E 7B A7 01 00 00 03 00 00 01 61 8E 7F 38 00 00 00 03 00 00 02 61 8E 7F CE 01 00 00 04 00 00 02 61 8E 81 1B 00 00 00 04 00 00 00 61 8E 81 50
526 526  
527 527  
528 528  **Parsed Value:**
529 529  
530 -[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, DOOR_OPEN_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
379 +[ALARM, DOOR_OPEN_STATUS, DOOR_OPEN_TIMES,LAST_DOOR_OPEN_DURATION, TIME]
531 531  
532 532  
533 -[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
382 +[FALSE, CLOSE, 0, 0, 2021-11-12 12:35:27],
534 534  
535 -[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
384 +[FALSE, OPEN,  1, 0, 2021-11-12 12:36:34],
536 536  
537 -[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
386 +[FALSE, CLOSE, 1, 2, 2021-11-12 12:39:00],
538 538  
539 -[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
388 +[FALSE, OPEN,  2, 2, 2021-11-12 12:39:17],
540 540  
541 -[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
390 +[FALSE, CLOSE, 2, 1, 2021-11-12 12:40:38],
542 542  
543 -[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
392 +[FALSE, CLOSE, 2, 1, 2021-11-12 14:35:19],
544 544  
545 -[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
394 +[FALSE, OPEN,  3, 1, 2021-11-12 14:50:32],
546 546  
547 -[[image:image-20230630172740-1.png||height="199" width="868"]]
396 +[FALSE, CLOSE, 3, 2, 2021-11-12 14:53:02],
548 548  
398 +[FALSE, OPEN,  4, 2, 2021-11-12 14:58:35],
549 549  
400 +[FALSE, CLOSE, 4, 0, 2021-11-12 14:59:28],
401 +
402 +
403 +=== 2.3.4  Sensor Configuration, FPORT~=4 ===
404 +
405 +
406 +DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
407 +
408 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
409 +|(% colspan="5" style="background-color:#d9e2f3; color:#0070c0; width:504px" %)**Sensor Configuration FPORT=4**
410 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:158px" %)**2**
411 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)Keep status|(% style="width:158px" %)Keep time (unit: min)
412 +
413 +* (((
414 +(% style="color:blue" %)**TDC: (default: 0x001C20)**
415 +)))
416 +
417 +Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
418 +
419 +
420 +* (((
421 +(% style="color:blue" %)**Disalarm: (default: 0)**
422 +)))
423 +
424 + **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
425 +
426 + **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
427 +
428 +
429 +(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
430 +
431 +
432 +* (((
433 +(% style="color:blue" %)**Keep Status & Keep Time**
434 +)))
435 +
436 +Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
437 +
438 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/image-20220609110018-4.png?width=1159&height=291&rev=1.1||alt="image-20220609110018-4.png" height="291" width="1159"]]
439 +
440 +
550 550  == 2.4 Payload Decoder file ==
551 551  
552 552  
... ... @@ -564,9 +564,7 @@
564 564  
565 565  (% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
566 566  
567 -(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
568 568  
569 -
570 570  === 2.5.1 Ways to get datalog via LoRaWAN ===
571 571  
572 572  
... ... @@ -718,10 +718,19 @@
718 718  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
719 719  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
720 720  
610 +=== 3.3.2 Get Device Status ===
721 721  
722 -=== 3.3.2  Enable / Disable Alarm ===
723 723  
613 +Send a LoRaWAN downlink to ask device send Alarm settings.
724 724  
615 +* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
616 +
617 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
618 +
619 +
620 +=== 3.3.3  Enable / Disable Alarm ===
621 +
622 +
725 725  Feature: Enable/Disable Alarm for open/close event. Default value 0.
726 726  
727 727  (% style="color:blue" %)**AT Command: **
... ... @@ -738,7 +738,7 @@
738 738  0xA7 00  ~/~/ Same As AT+DISALARM=0
739 739  
740 740  
741 -=== 3.3.3  Alarm Base on Timeout ===
639 +=== 3.3.4  Alarm Base on Timeout ===
742 742  
743 743  
744 744  DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
... ... @@ -764,103 +764,37 @@
764 764  If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
765 765  
766 766  
767 -* (((
768 -(% style="color:blue" %)**Downlink Command**
769 -)))
770 -
771 -(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
772 -
773 -**A9:** Command Type Code
774 -
775 -**aa: **01:TTRIG1; 02:TTRIG2
776 -
777 -**bb:** status to be monitored
778 -
779 -**cc dd:** timeout.
780 -
781 -
782 -1)**AT+TTRIG1**:(PA8 of pin)
783 -
784 784  (% style="color:blue" %)**AT Command to configure:**
785 785  
786 786  * (((
787 -(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
788 -
789 -(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
668 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. LDS03A will send an uplink packet, the [[Alarm bit>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
790 790  )))
791 791  
792 792  * (((
793 -(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
794 -
795 -
796 -
672 +(% style="color:#037691" %)**AT+TTRIG=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
797 797  )))
798 798  
799 799  (% style="color:blue" %)**Downlink Command to configure:**
800 800  
801 -If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
677 +(% style="color:#037691" %)**Command: 0xA9 aa bb cc**
802 802  
803 - 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
679 +**A9:** Command Type Code
804 804  
681 +**aa:** status to be monitored
805 805  
806 -2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
683 +**bb cc:** timeout.
807 807  
808 -(% style="color:blue" %)**AT Command to configure:**
809 809  
810 -* (((
811 -(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
686 +If user send 0xA9 01 00 1E: equal to AT+TTRIG=1,30
812 812  
813 -(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
814 -)))
688 +Or
815 815  
816 -* (((
817 -(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
690 +0xA9 00 00 00: Equal to AT+TTRIG=0,0. Disable timeout Alarm.
818 818  
819 819  
820 -
821 -)))
822 -
823 -(% style="color:blue" %)**Downlink Command to configure:**
824 -
825 -If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
826 -
827 - 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
828 -
829 -
830 -=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
831 -
832 -
833 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
834 -
835 -(% style="color:blue" %)**AT Command:**
836 -
837 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
838 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
839 -|(% style="width:155px" %)(((
840 -AT+TTRALARM=0
841 -)))|(% style="width:279px" %)(((
842 -disable continuous alarm
843 -)))|(% style="width:84px" %)(((
844 -OK
845 -)))
846 -|(% style="width:155px" %)(((
847 -AT+TTRALARM=60
848 -)))|(% style="width:279px" %)(((
849 -The alarm interval is 60 minutes (unit: minutes)
850 -)))|(% style="width:84px" %)(((
851 -OK
852 -)))
853 -
854 -(% style="color:blue" %)**Downlink Command:**
855 -
856 -Example:  0C aa  => AT+TTRALARM= aa
857 -
858 -
859 859  === 3.3.5  Count Mod ===
860 860  
861 861  
862 -Feature: Manually set the count mode.
863 -
864 864  (% style="color:blue" %)**AT Command:**
865 865  
866 866  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
... ... @@ -885,26 +885,24 @@
885 885  Example:  0B aa  => AT+COUNTMOD = second byte
886 886  
887 887  
888 -=== 3.3.6 Number of channel of door sensors ===
720 +=== 3.3.6  Interrupt Pin Channel Mod ===
889 889  
890 890  
891 -Feature: Set the number of door sensor channels.
892 -
893 893  (% style="color:blue" %)**AT Command:**
894 894  
895 895  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
896 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
726 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 288px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
897 897  |(% style="width:155px" %)(((
898 898  AT+TTRCHANNEL=1
899 -)))|(% style="width:259px" %)(((
900 -Set as single channel, only use PA8 pin as interrupt pin.
729 +)))|(% style="width:288px" %)(((
730 +set as single channel, only use PA8 pin as interrupt pin.
901 901  )))|(% style="width:44px" %)(((
902 902  OK
903 903  )))
904 904  |(% style="width:155px" %)(((
905 905  AT+TTRCHANNEL=2
906 -)))|(% style="width:259px" %)(((
907 -Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
736 +)))|(% style="width:288px" %)(((
737 +is set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
908 908  )))|(% style="width:44px" %)(((
909 909  OK
910 910  )))
... ... @@ -914,6 +914,52 @@
914 914  Example:  0D aa => AT+TTRCHANNEL = second byte
915 915  
916 916  
747 +=== 3.3.7  Change the name of AT+TTRIG to AT+TTRIG1 ===
748 +
749 +
750 +(% style="color:blue" %)**Downlink Command:**
751 +
752 +Example:  A9 01 aa bb cc  => AT+TTRIG1= third byte, 4th byte and 5th byte
753 +
754 +
755 +=== 3.3.8  Added AT+TTRIG2 for PB15 pin ===
756 +
757 +
758 +(% style="color:blue" %)**Downlink Command:**
759 +
760 +Example: A9 02 aa bb cc  => AT+TTRIG2= third byte, 4th byte and 5th byte
761 +
762 +
763 +=== 3.3.9  TTRIG1/2 timeout status alarm ===
764 +
765 +
766 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
767 +
768 +(% style="color:blue" %)**AT Command:**
769 +
770 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
771 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
772 +|(% style="width:155px" %)(((
773 +AT+TTRALARM=0
774 +)))|(% style="width:279px" %)(((
775 +disable continuous alarm
776 +)))|(% style="width:84px" %)(((
777 +OK
778 +)))
779 +|(% style="width:155px" %)(((
780 +AT+TTRALARM=60
781 +)))|(% style="width:279px" %)(((
782 +The alarm interval is 60 minutes (unit: minutes)
783 +)))|(% style="width:84px" %)(((
784 +OK
785 +)))
786 +
787 +(% style="color:blue" %)**Downlink Command:**
788 +
789 +Example:  0C aa  => AT+TTRALARM= aa
790 +
791 +
792 +
917 917  = 4. Battery & Power Consumption =
918 918  
919 919  
... ... @@ -936,8 +936,8 @@
936 936  
937 937  **Methods to Update Firmware:**
938 938  
939 -* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
940 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
815 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
816 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
941 941  
942 942  = 6. FAQ =
943 943  
image-20230630155406-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -41.8 KB
Content
image-20230630155451-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -77.2 KB
Content
image-20230630155527-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -39.2 KB
Content
image-20230630155556-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -38.4 KB
Content
image-20230630155751-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -511.7 KB
Content
image-20230630172740-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0