Skip to Content
Last modified by Mengting Qiu on 2025/07/03 16:36
From version 1.1
edited by Edwin Chen
on 2023/04/22 23:28
Change comment: There is no comment for this version
To version 31.1
edited by Saxer Lin
on 2023/07/01 09:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Saxer
Content
... ... @@ -1,4 +1,5 @@
1 -
1 +(% style="text-align:center" %)
2 +[[image:image-20230516085523-1.jpeg||height="491" width="491"]]
2 2  
3 3  
4 4  **Table of Contents：**
... ... @@ -12,57 +12,64 @@
12 12  
13 13  = 1. Introduction =
14 14  
15 -== 1.1 What is D2x-LB LoRaWAN Temperature Sensor ==
16 +== 1.1 What is DS03A-LB LoRaWAN Door Sensor ==
16 16  
17 17  
18 18  (((
19 -The Dragino D2x-LB is a (% style="color:blue" %)**LoRaWAN Temperature Sensor**(%%) for Internet of Things solution. D2x-LB has 1 ~~ 3 temperature probes. D2x-LB will convert the Temperature reading to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.
20 +The Dragino DS03A-LB is a (% style="color:blue" %)**LoRaWAN Door Sensor**(%%) for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
20 20  )))
21 21  
22 22  (((
23 -The LoRa wireless technology used in D2x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
24 +The LoRa wireless technology used in DS03A-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
24 24  )))
25 25  
26 26  (((
27 -The temperature sensor used in D2x-LB can (% style="color:blue" %)**measure -55°C ~~ 125°C with accuracy ±0.5°C (max ±2.0 °C)**(%%).
28 +The DS03A-LB will send periodically data every 2 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, DS03A-LB can count each open event and uplink periodically.
28 28  )))
29 29  
30 30  (((
31 -D2x-LB supports (% style="color:blue" %)**temperature alarm feature,**(%%) user can set temperature alarm for instant notice. D2x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32 +DS03A-LB supports (% style="color:blue" %)**Datalog Feature,**(%%) it can save the data when there is no LoRaWAN network and uplink when network recover.
32 32  )))
33 33  
34 34  (((
35 -D2x-LB has max 3 probes which measure maximum 3 temperature points.
36 +DS03A-LB has the (% style="color:blue" %)**Open Alarm Feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 +
38 +DS03A-LB is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures
36 36  )))
37 37  
38 38  (((
39 -D2x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
42 +DS03A-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
40 40  )))
41 41  
42 42  (((
43 -D2x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
46 +DS03A-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
44 44  )))
45 45  
46 46  (((
47 -Each D2x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
50 +Each DS03A-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
48 48  )))
49 49  
50 50  
54 +[[image:image-20230522092934-2.png||height="346" width="774"]]
55 +
56 +
51 51  == 1.2 ​Features ==
52 52  
59 +
53 53  * LoRaWAN 1.0.3 Class A
54 54  * Ultra-low power consumption
55 -* 1 ~~ 3 External Temperature Probes
56 -* Measure range -55°C ~~ 125°C
57 -* Temperature alarm
58 58  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
63 +* Door Open/Close detect
64 +* Door open/close statistics
65 +* Datalog Feature, Open Alarm Feature
59 59  * Support Bluetooth v5.1 and LoRaWAN remote configure
60 60  * Support wireless OTA update firmware
61 61  * Uplink on periodically
62 62  * Downlink to change configure
63 63  * 8500mAh Battery for long term use
71 +* Wall Mountable
72 +* Outdoor Use
64 64  
65 -
66 66  == 1.3 Specification ==
67 67  
68 68  
... ... @@ -71,11 +71,10 @@
71 71  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
72 72  * Operating Temperature: -40 ~~ 85°C
73 73  
74 -(% style="color:#037691" %)**Temperature Sensor:**
82 +(% style="color:#037691" %)**Sensor Detect Distance:**
75 75  
76 -* Dallas DS18B20
77 -* Range: -55 to + 125°C
78 -* Accuracy ±0.5°C (max ±2.0 °C).
84 +* Wood Door: 10mm ~~ 30mm
85 +* Iron Door: 30 ~~ 45mm
79 79  
80 80  (% style="color:#037691" %)**LoRa Spec:**
81 81  
... ... @@ -97,19 +97,24 @@
97 97  * Sleep Mode: 5uA @ 3.3v
98 98  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
99 99  
107 +== 1.4 Applications ==
100 100  
101 -== 1.4 Sleep mode and working mode ==
102 102  
110 +[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741400370-813.png]]
103 103  
112 +
113 +== 1.5 Sleep mode and working mode ==
114 +
115 +
104 104  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
105 105  
106 106  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
107 107  
108 108  
109 -== 1.5 Button & LEDs ==
121 +== 1.6 Button & LEDs ==
110 110  
111 111  
112 -[[image:1675071855856-879.png]]
124 +[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675071855856-879.png]]
113 113  
114 114  
115 115  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
... ... @@ -123,15 +123,14 @@
123 123  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
124 124  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
125 125  )))
126 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means D2x-LB is in Deep Sleep Mode.
138 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means Device is in Deep Sleep Mode.
127 127  
140 +== 1.7 BLE connection ==
128 128  
129 -== 1.6 BLE connection ==
130 130  
143 +DS03A-LB support BLE remote configure.
131 131  
132 -D2x-LB support BLE remote configure.
133 133  
134 -
135 135  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
136 136  
137 137  * Press button to send an uplink
... ... @@ -141,112 +141,82 @@
141 141  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
142 142  
143 143  
144 -== 1.7  Hardware Variant ==
155 +== 1.8 Pin Definitions ==
145 145  
157 +[[image:image-20230630160843-7.png]]
146 146  
147 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
148 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
149 -|(% style="width:102px" %)D20-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
150 -1 x DS28B20 Probe
159 +== 1.9 Mechanical ==
151 151  
152 -Cable Length : 2 meters
153 153  
154 -
155 -)))
156 -|(% style="width:102px" %)D22-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 -2 x DS28B20 Probes
162 +[[image:Main.User Manual for LoRaWAN End Nodes.LDS03A - Outdoor LoRaWAN OpenClose Door Sensor Manual.WebHome@1654741444887-479.png||height="399" width="513"]]
158 158  
159 -Cable lengths total 1.5meters per probe
160 160  
161 -Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K21G-210811.pdf]]
162 -)))
163 -|(% style="width:102px" %)(((
164 -(((
165 -D23-LB
166 -)))
165 +[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143884058-338.png]]
167 167  
168 -(((
169 -
170 -)))
171 -)))|(% style="width:190px" %) |(% style="width:297px" %)(((
172 -3 x DS28B20 Probes
173 173  
174 -Cable lengths total 1.5meters per probe
168 +[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143899218-599.png]]
175 175  
176 -Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K31G-210811.pdf]]
177 -)))
178 178  
179 -(% style="display:none" %)
171 +[[image:Main.User Manual for LoRaWAN End Nodes.PS-LB -- LoRaWAN Pressure Sensor.WebHome@1675143909447-639.png]]
180 180  
181 181  
174 += 2. Configure DS03A-LB to connect to LoRaWAN network =
182 182  
183 -== 1.8 Mechanical ==
184 -
185 -
186 -[[image:1675143884058-338.png]]
187 -
188 -
189 -[[image:1675143899218-599.png]]
190 -
191 -
192 -[[image:1675143909447-639.png]]
193 -
194 -
195 -= 2. Configure D2x-LB to connect to LoRaWAN network =
196 -
197 197  == 2.1 How it works ==
198 198  
199 199  
200 -The D2x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the D2x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
179 +The DS03A-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the DS03A-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 2 hours.
201 201  
202 202  
203 203  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
204 204  
205 205  
206 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
185 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. (% style="display:none" %)
207 207  
187 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
208 208  
209 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
189 +[[image:image-20230522092858-1.png||height="391" width="874"]]
210 210  
211 211  
212 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from D2x-LB.
192 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from DS03A-LB.
213 213  
214 -Each D2x-LB is shipped with a sticker with the default device EUI as below:
194 +Each DS03A-LB is shipped with a sticker with the default device EUI as below:
215 215  
216 -[[image:image-20230131134744-2.jpeg]]
196 +[[image:image-20230426085205-1.png||height="238" width="512"]]
217 217  
218 218  
219 -
220 220  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
221 221  
201 +(% style="display:none" %) (%%)
222 222  
223 223  (% style="color:blue" %)**Register the device**
224 224  
225 -[[image:1675144099263-405.png]]
226 226  
206 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144099263-405.png?rev=1.1||alt="1675144099263-405.png"]](% style="display:none" %)
227 227  
208 +
228 228  (% style="color:blue" %)**Add APP EUI and DEV EUI**
229 229  
230 -[[image:1675144117571-832.png]]
211 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144117571-832.png?rev=1.1||alt="1675144117571-832.png"]]
231 231  
232 232  
233 233  (% style="color:blue" %)**Add APP EUI in the application**
234 234  
216 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144143021-195.png?rev=1.1||alt="1675144143021-195.png"]]
235 235  
236 -[[image:1675144143021-195.png]]
237 237  
238 -
239 239  (% style="color:blue" %)**Add APP KEY**
240 240  
241 -[[image:1675144157838-392.png]]
221 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/1675144157838-392.png?rev=1.1||alt="1675144157838-392.png"]]
242 242  
243 -(% style="color:blue" %)**Step 2:**(%%) Activate on D2x-LB
244 244  
224 +(% style="color:blue" %)**Step 2:**(%%) Activate on DS03A-LB
245 245  
246 -Press the button for 5 seconds to activate the D2x-LB.
247 247  
248 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
227 +Press the button for 5 seconds to activate the DS03A-LB.
249 249  
229 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to Join LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
230 +
250 250  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
251 251  
252 252  
... ... @@ -255,7 +255,7 @@
255 255  === 2.3.1 Device Status, FPORT~=5 ===
256 256  
257 257  
258 -Users can use the downlink command(**0x26 01**) to ask D2x-LB to send device configure detail, include device configure status. D2x-LB will uplink a payload via FPort=5 to server.
239 +Users can use the downlink command(**0x26 01**) to ask DS03A-LB to send device configure detail, include device configure status. DS03A-LB will uplink a payload via FPort=5 to server.
259 259  
260 260  The Payload format is as below.
261 261  
... ... @@ -267,42 +267,42 @@
267 267  
268 268  Example parse in TTNv3
269 269  
270 -[[image:image-20230415153147-2.png||height="220" width="1120"]]
251 +[[image:image-20230630155406-1.png||height="190" width="873"]]
271 271  
272 272  
273 -(% style="color:#037691" %)**Sensor Model**(%%): For D2x-LB, this value is 0x19
254 +(% style="color:#037691" %)**Sensor Model**(%%): For DS03A-LB, this value is 0x1B
274 274  
275 275  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
276 276  
277 277  (% style="color:#037691" %)**Frequency Band**:
278 278  
279 -*0x01: EU868
260 +0x01: EU868
280 280  
281 -*0x02: US915
262 +0x02: US915
282 282  
283 -*0x03: IN865
264 +0x03: IN865
284 284  
285 -*0x04: AU915
266 +0x04: AU915
286 286  
287 -*0x05: KZ865
268 +0x05: KZ865
288 288  
289 -*0x06: RU864
270 +0x06: RU864
290 290  
291 -*0x07: AS923
272 +0x07: AS923
292 292  
293 -*0x08: AS923-1
274 +0x08: AS923-1
294 294  
295 -*0x09: AS923-2
276 +0x09: AS923-2
296 296  
297 -*0x0a: AS923-3
278 +0x0a: AS923-3
298 298  
299 -*0x0b: CN470
280 +0x0b: CN470
300 300  
301 -*0x0c: EU433
282 +0x0c: EU433
302 302  
303 -*0x0d: KR920
284 +0x0d: KR920
304 304  
305 -*0x0e: MA869
286 +0x0e: MA869
306 306  
307 307  
308 308  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -323,282 +323,402 @@
323 323  Ex2: 0x0B49 = 2889mV
324 324  
325 325  
326 -=== 2.3.2  Sensor Data. FPORT~=2 ===
307 +=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.2  Sensor Configuration, FPORT~=4(%%) ===
327 327  
328 328  
329 -D2x-LB will uplink below payload via FPORT=2 after Joined LoRaWAN Network.
310 +DS03A-LB will only send this command after getting the downlink command (0x26 02) from the server.
330 330  
331 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
332 -|=(% style="width: 62.5px;background-color:#D9E2F3" %)(((
333 -**Size(bytes)**
334 -)))|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 120px;background-color:#D9E2F3" %)2|=(% style="width: 60px;background-color:#D9E2F3" %)2|=(% style="width: 65px;background-color:#D9E2F3" %)1|=(% style="width: 65px;background-color:#D9E2F3" %)**2**|=(% style="width: 65px;background-color:#D9E2F3" %)2
335 -|(% style="width:65px" %)**Value**|(((
336 -[[Battery>>||anchor="HBattery:"]]
337 -)))|(% style="width:91px" %)(((
338 -[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]
339 -)))|(% style="width:61px" %)(((
340 -ignore
341 -)))|(% style="width:91px" %)(((
342 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
343 -)))|(% style="width:99px" %)(((
344 -[[Temp_White>>||anchor="HTemperatureWhite:"]]
345 -)))|(% style="width:97px" %)(((
346 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
312 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:723px" %)
313 +|(% colspan="8" style="background-color:#d9e2f3; color:#0070c0; width:721px" %)**Sensor Configuration FPORT=4**
314 +|**Size(bytes)**|(% style="width:75px" %)**3**|(% style="width:77px" %)**1**|(% style="width:96px" %)**1**|(% style="width:99px" %)**2**|(% style="width:87px" %)**1**|(% style="width:97px" %)**2**|(% style="width:98px" %)**1**
315 +|**Value**|(% style="width:75px" %)TDC (unit:sec)|(% style="width:77px" %)Disalarm|(% style="width:96px" %)(((
316 +Keep status1
347 347  
348 348  
319 +)))|(% style="width:99px" %)(((
320 +Keep time1
321 +
322 +(unit: sec)
323 +)))|(% style="width:87px" %)Keep status2|(% style="width:97px" %)(((
324 +Keep time2
325 +
326 +(unit: sec)
327 +)))|(% style="width:98px" %)(((
328 +Alarm interval
329 +
330 +(unit: min)
349 349  )))
350 350  
351 -**Payload per each model.**
333 +* (((
334 +(% style="color:blue" %)**TDC: (default: 0x001C20)**
335 +)))
352 352  
353 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220916152530-2.png?rev=1.1||alt="image-20220916152530-2.png" height="240" width="901"]]
337 +Uplink interval for the Open/Close Event, default value is 0x001C20 which is 7200 seconds = 2 hours.
354 354  
355 355  
356 -[[image:image-20230415154139-3.png||height="215" width="1179"]]
340 +* (((
341 +(% style="color:blue" %)**Disalarm: (default: 0)**
342 +)))
357 357  
344 + **If Disalarm = 1**, DS03A-LB will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
358 358  
359 -==== (% style="color:#4472c4" %)**Decode corresponding probe color：**(%%) ====
346 + **If Disalarm = 0**, DS03A-LB will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
360 360  
361 -**D20:**
362 362  
363 -Red <~-~-> C1
349 +(% style="color:red" %)** Note: When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast. **
364 364  
365 -**D22:**
366 366  
367 -White <~-~-> C1 Red <~-~-> C2
352 +* (((
353 +(% style="color:blue" %)**Keep Status1 & Keep Time1 & Keep Status2 & Keep Time2**
354 +)))
368 368  
369 -**D23:**
356 +Shows the configure value of [[Alarm Base on Timeout Feature>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/#H3.8A0AlarmBaseonTimeout]]
370 370  
371 -White <~-~->C1 Red <~-~-> C2 Black <~-~-> C3
358 +[[image:image-20230630155527-3.png||height="146" width="902"]]
372 372  
373 373  
361 +* (((
362 +(% style="color:blue" %)**Alarm interval(default: 0)**
363 +)))
374 374  
375 -==== (% style="color:#4472c4" %)**Battery:**(%%) ====
365 +When the state of the door sensor has not been changed after the timeout alarm, the device will send a uplink every alarm interval. It will stop the alarm until the state of the door sensor is changed after the timeout alarm.
376 376  
377 -Sensor Battery Level.
378 378  
379 -Ex1: 0x0B45 = 2885mV
368 +=== 2.3.3  Real-Time Open/Close Status, Uplink FPORT~=2 ===
380 380  
381 -Ex2: 0x0B49 = 2889mV
382 382  
371 +DS03A-LB will send this uplink **after** Device Status once join the LoRaWAN network successfully. And DS03A-LB will send uplinks when:
383 383  
373 +* Every 2 hours, this interval [[can be changed>>||anchor="H3.3.1SetTransmitIntervalTime"]].
374 +* There is an Open/Close event.  (This info can be disabled by AT+DISALARM=1)
384 384  
385 -==== (% style="color:#4472c4" %)**Temperature RED or Temperature White :**(%%) ====
376 +1)When **AT+TTRCHANNEL=1**, Uplink Payload totals 11 bytes. (**Default mode**)
386 386  
387 -**This point to the Red probe in D20-LB or the probe of D22-LB/D23-LB White**
378 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
379 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=2**
380 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
381 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
382 +Status
388 388  
389 -**Example**:
384 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
385 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
386 +The last door open duration (unit: sec)
387 +)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
390 390  
391 -If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
389 +**Status & Alarm:**
392 392  
393 -If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
391 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:645px" %)
392 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:125px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:129px" %)**bit0**
393 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
394 +Count mod
395 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:125px" %)(((
396 +0: No Alarm;
394 394  
395 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
398 +1: Alarm
399 +)))|(% style="width:129px" %)(((
400 +Status 0: Close;
396 396  
402 +1: Open
403 +)))
397 397  
405 +[[image:image-20230630155451-2.png||height="246" width="928"]]
398 398  
399 -==== (% style="color:#4472c4" %)**Temperature White:**(%%) ====
400 400  
408 +* (((
409 +(% style="color:blue" %)**Count mod:Default=0**
410 +)))
401 401  
402 -**This point to the Red probe in D22-LB/D23-LB**
412 +MOD=0 ~-~-> Uplink total door open times since factory
403 403  
414 +MOD=1 ~-~-> Uplink total door open times since last FPORT=2 uplink.
404 404  
405 -**Example**:
406 406  
407 -If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
417 +* (% style="color:blue" %)**TDC flag**
408 408  
409 -If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
419 +When the flag is 1, it means sending packets at normal time intervals.
410 410  
411 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
421 +Otherwise, it is a packet sent at non-TDC time.
412 412  
413 413  
424 +* (((
425 +(% style="color:#0000ff" %)**Alarm**
426 +)))
414 414  
415 -==== (% style="color:#4472c4" %)**Temperature Black:**(%%) ====
428 +See [[Alarm Base on Timeout>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
416 416  
417 417  
418 -**This point to the BLACK probe in D23-LB**
431 +* (((
432 +(% style="color:blue" %)**Status**
433 +)))
419 419  
435 +This bit is 1 when the door sensor is open and 0 when it is close.
420 420  
421 -**Example**:
422 422  
423 -If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
438 +* (((
439 +(% style="color:blue" %)**Total open door events**
440 +)))
424 424  
425 -If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
442 +Total pulse/counting base on open door.
426 426  
427 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
444 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
428 428  
429 429  
447 +* (((
448 +(% style="color:blue" %)**The last door open duration**
449 +)))
430 430  
431 -==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
451 +Door sensor last open duration.
432 432  
453 +Unit: sec.
433 433  
434 -**Example:**
455 +[[image:image-20230701094042-1.png||height="154" width="763"]]
435 435  
436 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
437 437  
438 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
458 +2)When **AT+TTRCHANNEL=2**, Uplink Payload totals 18 bytes.
439 439  
460 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:819px" %)
461 +|=(% colspan="8" style="background-color: rgb(217, 226, 243); color: rgb(0, 112, 192); width: 817px;" %)**Real-Time Open/Close Status, FPORT=2**
462 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:125px" %)**3**|(% style="width:100px" %)**4**|(% style="width:86px" %)**1**|(% style="width:96px" %)**3**|(% style="width:126px" %)**3**
463 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
464 +Status1
440 440  
441 -== 2.4 Payload Decoder file ==
466 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]1
467 +)))|(% style="width:95px" %)Total open door events1|(% style="width:125px" %)(((
468 +The last door open duration1 (unit: sec)
469 +)))|(% style="width:100px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]|(% style="width:86px" %)(((
470 +Status2
442 442  
472 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]2
473 +)))|(% style="width:96px" %)Total open door events2|(% style="width:126px" %)The last door open duration2 (unit: sec)
443 443  
475 +**Status1 & Alarm1:**
476 +
477 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:730px" %)
478 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:79px" %)**[bit7:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:106px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:167px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:171px" %)**bit0**
479 +|(% style="width:76px" %)**Value**|(% style="width:96px" %)Reserve|(% style="width:110px" %)(((
480 +Count mod
481 +)))|(% style="width:106px" %)TDC flag 0:No;1:Yes|(% style="width:167px" %)(((
482 +0: No Alarm; 1: Alarm
483 +
484 +(PA8)
485 +)))|(% style="width:171px" %)(((
486 +Status 0: Close; 1:Open
487 +
488 +(PA8)
489 +)))
490 +
491 +**Status2 & Alarm2:**
492 +
493 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:550px" %)
494 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:113px" %)**[bit7:bit2]**|(% style="background-color:#d9e2f3; color:#0070c0; width:176px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:175px" %)**bit0**
495 +|(% style="width:76px" %)**Value**|(% style="width:113px" %)Reserve|(% style="width:176px" %)(((
496 +0: No Alarm; 1: Alarm
497 +
498 +(PA4)
499 +)))|(% style="width:175px" %)(((
500 +Status 0: Close,;1:Open
501 +
502 +(PA4)
503 +)))
504 +
505 +[[image:image-20230630155908-6.png||height="295" width="927"]]
506 +
507 +
508 +=== 2.3.4  Historical Door Open/Close Event, FPORT~=3 ===
509 +
510 +
511 +DS03A-LB stores sensor values and users can retrieve these history values via the [[downlink command>>||anchor="H2.5DatalogFeature"]].
512 +
513 +The historical payload includes one or multiplies entries and every entry has the same payload as Real-Time open/close status.
514 +
515 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
516 +|=(% colspan="5" style="background-color:#D9E2F3;color:#0070C0;width:515px" %)**Real-Time Open/Close Status, FPORT=3**
517 +|(% style="width:94px" %)**Size(bytes)**|(% style="width:97px" %)**1**|(% style="width:95px" %)**3**|(% style="width:119px" %)**3**|(% style="width:107px" %)**4**
518 +|(% style="width:95px" %)**Value**|(% style="width:97px" %)(((
519 +Status
520 +
521 +&[[Alarm>>||anchor="H3.3.4A0AlarmBaseonTimeout"]]
522 +)))|(% style="width:95px" %)Total open door events|(% style="width:119px" %)(((
523 +The last door open duration (unit: sec)
524 +)))|(% style="width:108px" %)[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
525 +
526 +**Status & Alarm:**
527 +
528 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:755px" %)
529 +|(% style="background-color:#d9e2f3; color:#0070c0; width:59px" %)**Size(bit)**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**bit7**|(% style="background-color:#d9e2f3; color:#0070c0; width:92px" %)**bit6**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**[bit5:bit4]**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**bit3**|(% style="background-color:#d9e2f3; color:#0070c0; width:95px" %)**bit2**|(% style="background-color:#d9e2f3; color:#0070c0; width:116px" %)**bit1**|(% style="background-color:#d9e2f3; color:#0070c0; width:112px" %)**bit0**
530 +|(% style="width:76px" %)**Value**|(% style="width:88px" %)No ACK message|(% style="width:92px" %)Poll Message Flag|(% style="width:89px" %)Reserve|(% style="width:90px" %)(((
531 +Count mod
532 +)))|(% style="width:95px" %)TDC flag 0:No;1:Yes|(% style="width:116px" %)(((
533 +0: No Alarm;
534 +
535 +1: Alarm
536 +)))|(% style="width:112px" %)(((
537 +Status 0:Close;
538 +
539 +1: Open
540 +)))
541 +
542 +* (((
543 +Each data entry is 11 bytes and has the same structure as [[Real-Time open/close status>>||anchor="H2.3.2A0Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2"]], to save airtime and battery, DS03A-LB will send max bytes according to the current DR and Frequency bands.
544 +)))
545 +
546 +For example, in the US915 band, the max payload for different DR is:
547 +
444 444  (((
445 -In TTN, use can add a custom payload so it shows friendly. 
549 +**~1. DR0**: max is 11 bytes so one entry of data
446 446  )))
447 447  
448 448  (((
449 -In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
553 +**2. DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
450 450  )))
451 451  
556 +(((
557 +**3. DR2**: total payload includes 11 entries of data
558 +)))
452 452  
453 -== 2.5 Datalog Feature ==
560 +(((
561 +**4. DR3**: total payload includes 22 entries of data.
562 +)))
454 454  
564 +If DS03A-LB doesn't have any data in the polling time. It will uplink 11 bytes of 0
455 455  
456 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, D2x-LB will store the reading for future retrieving purposes.
566 +[[image:image-20230630155556-4.png||height="146" width="938"]]
457 457  
568 +**Downlink:**
458 458  
459 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
570 +0x31 64 9E 7D 34 64 9E 7E 9C 05
460 460  
461 461  
462 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], D2x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,D2x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
573 +**Uplink:**
463 463  
464 -* a) D2x-LB will do an ACK check for data records sending to make sure every data arrive server.
465 -* b) D2x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but D2x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if D2x-LB gets a ACK, D2x-LB will consider there is a network connection and resend all NONE-ACK Message.
575 +45 00 00 00 00 00 00 64 9E 7D 48 40 00 00 00 00 00 63 64 9E 7D 9C 41 00 00 01 00 00 63 64 9E 7D A4 40 00 00 01 00 00 8D 64 9E 7E 31 43 00 00 02 00 00 8D 64 9E 7E 44 48 00 00 02 00 00 1F 64 9E 7E 59 4B 00 00 03 00 00 1F 64 9E 7E 6B
466 466  
467 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
468 468  
469 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
578 +**Parsed Value:**
470 470  
471 -=== 2.5.2 Unix TimeStamp ===
580 +[COUNTMOD, TDC_FLAG, ALARM,  DOOR_STATUS, OPEN_DOOR_TIMES, LAST_DOOR_OPEN_DURATION, TIME]
472 472  
473 473  
474 -D2x-LB uses Unix TimeStamp format based on
583 +[SUM,YES,FALSE,OPEN,0,0,2023-06-30 06:59:20],
475 475  
476 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
585 +[SUM,NO,FALSE,CLOSE,0,99,2023-06-30 07:00:44],
477 477  
478 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
587 +[SUM,NO,FALSE,OPEN, 1,99,2023-06-30 07:00:52],
479 479  
480 -Below is the converter example
589 +[SUM,NO,FALSE,CLOSE,1,141,2023-06-30 07:03:13],
481 481  
482 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
591 +[SUM,NO,TRUE,OPEN, 2,141,2023-06-30 07:03:32],
483 483  
484 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
593 +[PART,NO,FALSE,CLOSE,2,31,2023-06-30 07:03:53],
485 485  
595 +[PART,NO,TRUE,OPEN, 3,31,2023-06-30 07:04:11],
486 486  
487 -=== 2.5.3 Set Device Time ===
597 +[[image:image-20230630172740-1.png||height="199" width="868"]]
488 488  
489 489  
490 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
600 +== 2.4 Payload Decoder file ==
491 491  
492 -Once D2x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to D2x-LB. If D2x-LB fails to get the time from the server, D2x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
493 493  
494 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
603 +(((
604 +In TTN, use can add a custom payload so it shows friendly. 
605 +)))
495 495  
607 +(((
608 +In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
609 +)))
496 496  
497 -=== 2.5.4 Datalog Uplink payload  (FPORT~=3) ===
498 498  
612 +== 2.5 Datalog Feature ==
499 499  
500 -The Datalog poll reply uplink will use below payload format.
501 501  
502 -**Retrieval data payload:**
615 +(% style="color:blue" %)**Datalog Feature** (%%)is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, DS03A-LB will store the reading for future retrieving purposes.
503 503  
504 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
505 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
506 -**Size(bytes)**
507 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 115px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 80px; background-color: rgb(217, 226, 243);" %)**4**
508 -|(% style="width:93px" %)**Value**|(% style="width:54px" %)(((
509 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
510 -)))|(% style="width:54px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:87px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:104px" %)Poll message flag & Ext|(% style="width:55px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
617 +(% style="color:red" %)**Note:After the device is reset,in cumulative counting mode,the last stored count value will be read as the initial value.**
511 511  
512 -**Poll message flag & Ext:**
513 513  
514 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
620 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
515 515  
516 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
517 517  
518 -**Poll Message Flag**: 1: This message is a poll message reply.
623 +Set PNACKMD=1, DS03A-LB will wait for ACK for every uplink, when there is no LoRaWAN network,DS03A-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
519 519  
520 -* Poll Message Flag is set to 1.
625 +* a) DS03A-LB will do an ACK check for data records sending to make sure every data arrive server.
626 +* b) DS03A-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but DS03A-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if DS03A-LB gets a ACK, DS03A-LB will consider there is a network connection and resend all NONE-ACK Message.
521 521  
522 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
628 +Below is the typical case for the Datalog Feature (Set PNACKMD=1)
523 523  
524 -For example, in US915 band, the max payload for different DR is:
630 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
525 525  
526 -**a) DR0:** max is 11 bytes so one entry of data
527 527  
528 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
633 +=== 2.5.2 Unix TimeStamp ===
529 529  
530 -**c) DR2:** total payload includes 11 entries of data
531 531  
532 -**d) DR3: **total payload includes 22 entries of data.
636 +DS03A-LB uses Unix TimeStamp format based on
533 533  
534 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
638 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
535 535  
640 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
536 536  
537 -**Example:**
642 +Below is the converter example
538 538  
539 -If D2x-LB has below data inside Flash:
644 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
540 540  
541 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
646 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
542 542  
543 -If user sends below downlink command: 3160065F9760066DA705
544 544  
545 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
649 +=== 2.5.3 Set Device Time ===
546 546  
547 - Stop time: 60066DA7= time 21/1/19 05:27:03
548 548  
652 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
549 549  
550 -**D2x-LB will uplink this payload.**
654 +Once DS03A-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to DS03A-LB. If DS03A-LB fails to get the time from the server, DS03A-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
551 551  
552 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
656 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN v3 and loriot support but TTN v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN v2 if SYNCMOD=1.**
553 553  
554 -(((
555 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
556 -)))
557 557  
558 -(((
559 -Where the first 11 bytes is for the first entry:
560 -)))
659 +== 2.6 ​Show Data in DataCake IoT Server ==
561 561  
562 -(((
563 -7FFF089801464160065F97
564 -)))
565 565  
566 -(((
567 -**Ext sensor data**=0x7FFF/100=327.67
568 -)))
662 +Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
569 569  
570 -(((
571 -**Temp**=0x088E/100=22.00
572 -)))
573 573  
574 -(((
575 -**Hum**=0x014B/10=32.6
576 -)))
665 +(% style="color:blue" %)**Step 1:**(%%)** Link TTNv3 to Datacake.**[[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
577 577  
578 -(((
579 -**poll message flag & Ext**=0x41,means reply data,Ext=1
580 -)))
667 +(% style="color:blue" %)**Step 2:**(%%)** Configure DS03A-LB in Datacake.**
581 581  
582 -(((
583 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
584 -)))
669 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746350207-427.png?rev=1.1||alt="1654746350207-427.png"]]
585 585  
586 586  
587 -(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
672 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654747162439-840.png?rev=1.1||alt="1654747162439-840.png"]]
588 588  
589 -== 2.6 Temperature Alarm Feature ==
590 590  
675 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746405400-203.png?rev=1.1||alt="1654746405400-203.png"]]
591 591  
592 -D2x-LB work flow with Alarm feature.
593 593  
678 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746763908-732.png?rev=1.1||alt="1654746763908-732.png"]]
594 594  
595 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
596 596  
681 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746716087-684.png?rev=1.1||alt="1654746716087-684.png"]]
597 597  
683 +
684 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746693868-718.png?rev=1.1||alt="1654746693868-718.png"]]
685 +
686 +
687 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746674738-826.png?rev=1.1||alt="1654746674738-826.png"]]
688 +
689 +
690 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746646379-591.png?rev=1.1||alt="1654746646379-591.png"]]
691 +
692 +
693 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746549277-209.png?rev=1.1||alt="1654746549277-209.png"]]
694 +
695 +
696 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS03A%20-%20Outdoor%20LoRaWAN%20OpenClose%20Door%20Sensor%20Manual/WebHome/1654746593411-887.png?rev=1.1||alt="1654746593411-887.png"]]
697 +
698 +
598 598  == 2.7 Frequency Plans ==
599 599  
600 600  
601 -The D2x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
702 +The DS03A-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
602 602  
603 603  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
604 604  
... ... @@ -606,23 +606,20 @@
606 606  == 2.8 ​Firmware Change Log ==
607 607  
608 608  
609 -**Firmware download link:**
710 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0>>https://www.dropbox.com/sh/b0uwyzjs4px4eao/AADvI7fPRwsFKTglEmaRRuaaa?dl=0]]
610 610  
611 -[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
612 612  
713 += 3. Configure DS03A-LB =
613 613  
614 -= 3. Configure D2x-LB =
615 -
616 616  == 3.1 Configure Methods: ==
617 617  
618 618  
619 -D2x-LB supports below configure method:
718 +DS03A-LB supports below configure method:
620 620  
621 621  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
622 622  * AT Command via UART Connection : See [[Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
623 623  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
624 624  
625 -
626 626  == 3.2 General Commands ==
627 627  
628 628  
... ... @@ -636,13 +636,13 @@
636 636  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
637 637  
638 638  
639 -== 3.3 Commands special design for D2x-LB ==
737 +== 3.3 Commands special design for DS03A-LB ==
640 640  
641 641  
642 -These commands only valid for D2x-LB, as below:
740 +These commands only valid for DS03A-LB, as below:
643 643  
644 644  
645 -=== 3.3.1 Set Transmit Interval Time ===
743 +=== 3.3.1  Set Transmit Interval Time ===
646 646  
647 647  
648 648  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -650,7 +650,7 @@
650 650  (% style="color:blue" %)**AT Command: AT+TDC**
651 651  
652 652  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
653 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
751 +|=(% style="width: 156px;background-color:#D9E2F3; color:#0070c0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3; color:#0070c0" %)**Function**|=(% style="background-color:#D9E2F3; color:#0070c0" %)**Response**
654 654  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
655 655  30000
656 656  OK
... ... @@ -670,130 +670,291 @@
670 670  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
671 671  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
672 672  
771 +=== 3.3.2  Enable / Disable Alarm ===
673 673  
674 -=== 3.3.2 Get Device Status ===
675 675  
774 +Feature: Enable/Disable Alarm for open/close event. Default value 0.
676 676  
677 -Send a LoRaWAN downlink to ask device send Alarm settings.
776 +(% style="color:blue" %)**AT Command: **
678 678  
679 -* (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
778 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
779 +|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:278px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:88px" %)**Response**
780 +|(% style="width:154px" %)AT+DISALARM=1|(% style="width:278px" %)End node will only send packets in TDC time.|OK
781 +|(% style="width:154px" %)AT+DISALARM=0|(% style="width:278px" %)End node will send packets in TDC time or status change for door sensor|OK
680 680  
681 -Sensor will upload Device Status via FPORT=5. See payload section for detail.
783 +(% style="color:blue" %)**Downlink Command: **
682 682  
785 +0xA7 01  ~/~/ Same As AT+DISALARM=1
683 683  
684 -=== 3.3.3 Set Alarm Thredhold ===
787 +0xA7 00  ~/~/ Same As AT+DISALARM=0
685 685  
686 686  
687 -(% style="color:blue" %)**1.  Set for All Probes:**
790 +=== 3.3.3  Alarm Base on Timeout ===
688 688  
689 -(% style="color:#037691" %)**AT+18ALARM=min,max**
690 690  
691 -* When min=0, and max≠0, Alarm trigger when higher than max
692 -* When min≠0, and max=0, Alarm trigger when lower than min
693 -* When min≠0 and max≠0, Alarm trigger when higher than max or lower than min
793 +DS03A-LB can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
694 694  
695 -**Example:**
696 696  
697 - AT+18ALARM=-10,30  ~/~/ Alarm when < -10 or higher than 30.
796 +* (((
797 +(% style="color:blue" %)**Keep Status: Status to be monitor**
798 +)))
698 698  
800 +(% style="color:#037691" %)**Keep Status = 1**(%%): Monitor Close to Open event
699 699  
700 -* (% style="color:blue" %)**Downlink Payload:**
802 +(% style="color:#037691" %)**Keep Status = 0**(%%): Monitor Open to Close event
701 701  
702 -0x(0B F6 1E)   ~/~/ Same as AT+18ALARM=-10,30
703 703  
704 -(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
805 +* (((
806 +(% style="color:blue" %)**Keep Time: Timeout to send an Alarm**
807 +)))
705 705  
809 +Range 0 ~~ 65535(0xFFFF) seconds.
706 706  
707 -(% style="color:blue" %)**2.  Set for Separate Probe:**
811 +If (% style="color:#037691" %)**keep time = 0**(%%), Disable Alarm Base on Timeout feature.
708 708  
709 -(% style="color:#037691" %)**AT+18ALARM=min,max,index**
813 +If (% style="color:#037691" %)**keep time > 0**(%%), device will monitor the keep status event and send an alarm when status doesn't change after timeout.
710 710  
711 -Index:
712 712  
713 -* 1: Temperature_Red
714 -* 2: Temperature_White
715 -* 3: Temperature_Black
816 +* (((
817 +(% style="color:blue" %)**Downlink Command**
818 +)))
716 716  
717 -**Example:**
820 +(% style="color:#037691" %)**Command: 0xA9 aa bb cc dd**
718 718  
719 - AT+18ALARM=-10,30,1   ~/~/ Alarm when temperature_red < -10 or higher than 30.
822 +**A9:** Command Type Code
720 720  
824 +**aa: **01:TTRIG1; 02:TTRIG2
721 721  
722 -* (% style="color:blue" %)**Downlink Payload:**
826 +**bb:** status to be monitored
723 723  
724 -0x(0B F6 1E 01)   ~/~/ Same as AT+18ALARM=-10,30,1
828 +**cc dd:** timeout.
725 725  
726 -(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
727 727  
831 +1)**AT+TTRIG1**:(PA8 of pin)
728 728  
729 -=== 3.3.4 Set Alarm Interval ===
833 +(% style="color:blue" %)**AT Command to configure:**
730 730  
835 +* (((
836 +(% style="color:#037691" %)**AT+TTRIG1=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit(the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
731 731  
732 -The shortest time of two Alarm packet. (unit: min)
838 +(% style="color:#037691" %)**AT+TTRIG1=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm1 bit (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
839 +)))
733 733  
734 -* (% style="color:blue" %)**AT Command:**
841 +* (((
842 +(% style="color:#037691" %)**AT+TTRIG1=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
735 735  
736 -AT+ATDC=30  ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
737 737  
845 +
846 +)))
738 738  
739 -* (% style="color:blue" %)**Downlink Payload:**
848 +(% style="color:blue" %)**Downlink Command to configure:**
740 740  
741 -0x(0D 00 1E)     **~-~-->** Set AT+ATDC=0x 00 1E = 30 minutes
850 +If user send 0xA9 01 01 00 1E: equal to AT+TTRIG1=1,30 or
742 742  
852 + 0xA9 01 00 00 00: Equal to AT+TTRIG1=0,0.
743 743  
744 -=== 3.3.5 Get Alarm settings  （什么FPORT?） ===
745 745  
855 +2)**AT+TTRIG2**:(PA4 of pin,need to use AT+TTRCHANNEL=2)
746 746  
747 -Send a LoRaWAN downlink to ask device send Alarm settings.
857 +(% style="color:blue" %)**AT Command to configure:**
748 748  
749 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
859 +* (((
860 +(% style="color:#037691" %)**AT+TTRIG2=1,30** (%%) **~-~->** When the **Keep Status** change from close to open, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
750 750  
751 -**Example:**
862 +(% style="color:#037691" %)**AT+TTRIG2=0,30** (%%) **~-~->** When the **Keep Status** change from open to close, and device remains in open status for more than 30 seconds. DS03A-LB will send an uplink packet, the Alarm2 bit (the second bit of 12^^st^^ byte of payload) on this uplink packet is set to 1.
863 +)))
752 752  
753 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
865 +* (((
866 +(% style="color:#037691" %)**AT+TTRIG2=0,0**  (%%) **~-~-> ** Default Value, disable timeout Alarm.
754 754  
755 755  
756 -**Explain:**
869 +
870 +)))
757 757  
758 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
872 +(% style="color:blue" %)**Downlink Command to configure:**
759 759  
874 +If user send 0xA9 02 00 00 1E: equal to AT+TTRIG2=0,30 or
760 760  
761 -=== 3.3.6 Set Interrupt Mode ===
876 + 0xA9 02 00 00 00: Equal to AT+TTRIG2=0,0.
762 762  
763 763  
764 -Feature, Set Interrupt mode for GPIO_EXIT.
879 +=== 3.3.4  TTRIG1 & TTRIG2 timeout status alarm ===
765 765  
766 -(% style="color:blue" %)**AT Command: AT+INTMOD**
767 767  
882 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
883 +
884 +(% style="color:blue" %)**AT Command:**
885 +
768 768  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
769 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
770 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
771 -0
887 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 279px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 76px;background-color:#D9E2F3;color:#0070C0" %)**Response**
888 +|(% style="width:155px" %)(((
889 +AT+TTRALARM=0
890 +)))|(% style="width:279px" %)(((
891 +disable continuous alarm
892 +)))|(% style="width:84px" %)(((
772 772  OK
773 -the mode is 0 =Disable Interrupt
774 774  )))
775 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
776 -Set Transmit Interval
777 -0. (Disable Interrupt),
778 -~1. (Trigger by rising and falling edge)
779 -2. (Trigger by falling edge)
780 -3. (Trigger by rising edge)
781 -)))|(% style="width:157px" %)OK
895 +|(% style="width:155px" %)(((
896 +AT+TTRALARM=60
897 +)))|(% style="width:279px" %)(((
898 +The alarm interval is 60 minutes (unit: minutes)
899 +)))|(% style="width:84px" %)(((
900 +OK
901 +)))
782 782  
783 -(% style="color:blue" %)**Downlink Command: 0x06**
903 +(% style="color:blue" %)**Downlink Command:**
784 784  
785 -Format: Command Code (0x06) followed by 3 bytes.
905 +Example:  0C aa  => AT+TTRALARM= aa
786 786  
787 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
788 788  
789 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
790 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
908 +=== 3.3.5  Count Mod ===
791 791  
792 792  
911 +Feature: Manually set the count mode.
912 +
913 +(% style="color:blue" %)**AT Command:**
914 +
915 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
916 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 277px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
917 +|(% style="width:155px" %)(((
918 +AT+COUNTMOD=0
919 +)))|(% style="width:277px" %)(((
920 +the count value keeps accumulating mode
921 +)))|(% style="width:86px" %)(((
922 +OK
923 +)))
924 +|(% style="width:155px" %)(((
925 +AT+COUNTMOD=1
926 +)))|(% style="width:277px" %)(((
927 +the count value will be reset after each TDC time（Last Close Duration Reset after each uplink）
928 +)))|(% style="width:86px" %)(((
929 +OK
930 +)))
931 +
932 +(% style="color:blue" %)**Downlink Command:**
933 +
934 +Example:  0B aa  => AT+COUNTMOD = second byte
935 +
936 +
937 +=== 3.3.6  Number of channel of door sensors ===
938 +
939 +
940 +Feature: Set the number of door sensor channels.
941 +
942 +(% style="color:blue" %)**AT Command:**
943 +
944 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
945 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
946 +|(% style="width:155px" %)(((
947 +AT+TTRCHANNEL=1
948 +)))|(% style="width:259px" %)(((
949 +Set as single channel, only use PA8 pin as interrupt pin.
950 +)))|(% style="width:44px" %)(((
951 +OK
952 +)))
953 +|(% style="width:155px" %)(((
954 +AT+TTRCHANNEL=2
955 +)))|(% style="width:259px" %)(((
956 +Set as dual channel, use PA8 pin and PA4 pin as interrupt pin.
957 +)))|(% style="width:44px" %)(((
958 +OK
959 +)))
960 +
961 +(% style="color:blue" %)**Downlink Command:**
962 +
963 +Example:  0D aa => AT+TTRCHANNEL = second byte
964 +
965 +
966 +=== 3.3.7  Set Time Sync Mode ===
967 +
968 +
969 +Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply to this command.
970 +
971 +SYNCMOD is set to 1 by default. If user wants to set a different time from the LoRaWAN server, the user needs to set this to 0.
972 +
973 +(% style="color:blue" %)**AT Command:**
974 +
975 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
976 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
977 +|(% style="width:155px" %)(((
978 +AT+SYNCMOD=1
979 +)))|(% style="width:259px" %)(((
980 +Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) The default is zero time zone.
981 +)))|(% style="width:44px" %)(((
982 +OK
983 +)))
984 +|(% style="width:155px" %)(((
985 +AT+SYNCMOD=1,8
986 +)))|(% style="width:259px" %)(((
987 +Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to East eight time zone.
988 +)))|(% style="width:44px" %)(((
989 +OK
990 +)))
991 +|(% style="width:155px" %)AT+SYNCMOD=1,-12|(% style="width:259px" %)Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq) Set to West Twelve Time Zone.|(% style="width:44px" %)OK
992 +
993 +(% style="color:blue" %)**Downlink Command:**
994 +
995 +0x28 01  ~/~/ Same As AT+SYNCMOD=1
996 +
997 +0x28 01 08  ~/~/ Same As AT+SYNCMOD=1,8
998 +
999 +0x28 01 F4  ~/~/ Same As AT+SYNCMOD=1,-12
1000 +
1001 +0x28 00  ~/~/ Same As AT+SYNCMOD=0
1002 +
1003 +
1004 +=== 3.3.8  Clear the open door times and the duration of the last open door ===
1005 +
1006 +
1007 +(% style="color:blue" %)**AT Command:**
1008 +
1009 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1010 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1011 +|(% style="width:155px" %)AT+CLRC|(% style="width:259px" %)clear the open door times and the duration of the last open door.|(% style="width:44px" %)(((
1012 +OK
1013 +)))
1014 +
1015 +(% style="color:blue" %)**Downlink Command:**(%%)0xA6 01
1016 +
1017 +The sensor will clear the open door times and the duration of the last open door.
1018 +
1019 +
1020 +=== 3.3.9  Set the count value of the number of open door ===
1021 +
1022 +
1023 +(% style="color:blue" %)**AT Command:**
1024 +
1025 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
1026 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 259px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 57px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1027 +|(% style="width:155px" %)(((
1028 +AT+SETCNT=1,100
1029 +)))|(% style="width:259px" %)(((
1030 +Set the open door times of PA8 pin to 100 times.
1031 +)))|(% style="width:44px" %)(((
1032 +OK
1033 +)))
1034 +|(% style="width:155px" %)AT+SETCNT=1,0|(% style="width:259px" %)Clear the open door times of PA8 pin.|(% style="width:44px" %)OK
1035 +|(% style="width:155px" %)(((
1036 +AT+SETCNT=2,50
1037 +)))|(% style="width:259px" %)(((
1038 +Set the open door times of PA4 pin to 100 times.
1039 +)))|(% style="width:44px" %)(((
1040 +OK
1041 +)))
1042 +
1043 +(% style="color:blue" %)**Downlink Command:**
1044 +
1045 +0xA6 01 00 00 64  ==>  AT+SETCNT=1,100
1046 +
1047 +0xA6 01 00 00 00  ==>  AT+SETCNT=1,0
1048 +
1049 +0xA6 02 00 00 32  ==>  AT+SETCNT=2,50
1050 +
1051 +
793 793  = 4. Battery & Power Consumption =
794 794  
795 795  
796 -D2x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1055 +DS03A-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
797 797  
798 798  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
799 799  
... ... @@ -801,7 +801,7 @@
801 801  = 5. OTA firmware update =
802 802  
803 803  
804 -User can change firmware S31x-LB to:
1063 +User can change firmware DS03A-LB to:
805 805  
806 806  * Change Frequency band/ region.
807 807  * Update with new features.
... ... @@ -810,12 +810,11 @@
810 810  Firmware and changelog can be downloaded from : **[[Firmware download link>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
811 811  
812 812  
813 -Methods to Update Firmware:
1072 +**Methods to Update Firmware:**
814 814  
815 -* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
816 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1074 +* (Recommanded way) OTA firmware update via wireless:** [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1075 +* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
817 817  
818 -
819 819  = 6. FAQ =
820 820  
821 821  
... ... @@ -823,7 +823,7 @@
823 823  = 7. Order Info =
824 824  
825 825  
826 -Part Number: (% style="color:blue" %)**D20-LB-XX  / D22-LB-XX / D23-LB-XX**
1084 +Part Number: (% style="color:blue" %)**DS03A-LB-XX**
827 827  
828 828  (% style="color:red" %)**XX**(%%): The default frequency band
829 829  
... ... @@ -843,13 +843,12 @@
843 843  
844 844  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
845 845  
846 -
847 847  = 8. ​Packing Info =
848 848  
849 849  
850 850  (% style="color:#037691" %)**Package Includes**:
851 851  
852 -* D2x-LB LoRaWAN Temperature Sensor
1109 +* DS03A-LB LoRaWAN Temperature Sensor
853 853  
854 854  (% style="color:#037691" %)**Dimension and weight**:
855 855  
... ... @@ -861,10 +861,9 @@
861 861  
862 862  * Weight / pcs : g
863 863  
864 -
865 865  = 9. Support =
866 866  
867 867  
868 868  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
869 869  
870 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1126 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
image-20230426085205-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.0 KB
Content
image-20230516085523-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 MB
Content
image-20230522092858-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +156.5 KB
Content
image-20230522092934-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +156.5 KB
Content
image-20230522093256-3.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.5 KB
Content
image-20230630155406-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +41.8 KB
Content
image-20230630155451-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +77.2 KB
Content
image-20230630155527-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +39.2 KB
Content
image-20230630155556-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +38.4 KB
Content
image-20230630155751-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20230630155908-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +90.8 KB
Content
image-20230630160843-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +511.7 KB
Content
image-20230630172740-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.1 KB
Content
image-20230701094042-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +34.5 KB
Content