Wiki source code of LPS8v2 LoRaWAN Indoor Gateway User Manual

Version 157.1 by Kilight Cao on 2023/03/21 09:24

version	line-number	content
69.2	1	(% style="text-align:center" %)
43.1	2	[[image:image-20220620202334-2.png\|\|height="467" width="809"]]
4.1	3
	4
	5	(((
69.2	6
4.1	7
	8
	9	)))
5.1	10
	11	Table of Contents：
	12
	13	{{toc/}}
	14
69.2	15
83.2	16
	17
	18
117.2	19	= 1. Introduction =
5.1	20
117.2	21	== 1.1 What is LPS8v2 ==
83.2	22
5.1	23
	24	(((
69.7	25	(((
44.1	26	The LPS8v2 is an (% style="color:green" %)open-source LoRaWAN Gateway(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)WiFi , Ethernet or Cellular Network(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
69.7	27	)))
6.2	28
69.7	29	(((
44.1	30	The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
69.7	31	)))
6.2	32
69.7	33	(((
44.1	34	LPS8v2 also includes a (% style="color:green" %)built-in LoRaWAN Server and IoT server(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
69.7	35	)))
6.2	36
69.7	37	(((
43.1	38	Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
69.7	39	)))
6.2	40
69.7	41	(((
44.1	42	LPS8v2 supports (% style="color:green" %)remote management(%%). System Integrator can easy to remote monitor the gateway and maintain it.
69.7	43	)))
43.1	44
	45
117.2	46	== 1.2 Specifications ==
69.2	47
6.2	48
69.2	49	(% style="color:#037691" %)Hardware System:
	50
46.1	51	* CPU: Quad-core Cortex-A7 1.2Ghz
6.2	52	* RAM: 512MB
	53	* eMMC: 4GB
	54
69.2	55	(% style="color:#037691" %)Interface:
6.2	56
	57	* 10M/100M RJ45 Ports x 1
45.1	58	* Multi-Channel LoRaWAN Wireless
43.1	59	* WiFi 802.11 b/g/n
156.2	60	* Sensitivity: -140dBm
	61	* Max Output Power: 27dBm
6.2	62
69.2	63	(% style="color:#037691" %)Operating Condition:
6.2	64
156.2	65	* Work Temperature: -20 ~~ 70°C
	66	* Storage Temperature: -20 ~~ 70°C
45.1	67	* Power Input: 5V, 2A, DC
6.2	68
156.2	69
	70
117.2	71	== 1.3 Features ==
	72
	73
6.2	74	* Open Source Debian system
	75	* Managed by Web GUI, SSH via WAN or WiFi
45.1	76	* Remote Management
49.1	77	* Auto-provisioning for batch deployment and management
6.2	78	* LoRaWAN Gateway
	79	* 10 programmable parallel demodulation paths
26.1	80	* Pre-configured to support different LoRaWAN regional settings.
11.1	81	* Allow customizing LoRaWAN regional parameters.
45.1	82	* Different kinds of LoRaWAN Connections such as
	83	** Semtech UDP Packet Forwarder
	84	** LoRaWAN Basic Station
	85	** ChirpStack-Gateway-Bridge (MQTT)
69.2	86	* Built-in (% style="color:#037691" %)//The Things Network//(%%) local LoRaWAN server
	87	* Built-in (% style="color:#037691" %)//Node-Red// (%%)local Application server
6.2	88
156.2	89
	90
117.2	91	== 1.4 Block Diagram ==
69.3	92
35.1	93
69.3	94
117.2	95	== 1.5 LED Indicators ==
	96
	97
35.1	98	LPS8-V2 has totally four LEDs, They are:
	99
	100
69.3	101	(% style="color:blue" %)//➢ Power LED//(%%)//: This RED LED will be solid if the device is properly powered//
35.1	102
107.3	103	(% style="color:blue" %)//➢ ETH LED//(%%)//: This RGB LED will blink GREEN when the ETH port is connecting//
35.1	104
107.3	105	(% style="color:blue" %)//➢ SYS LED//(%%)//: This RGB LED will show different colors in different states~://
35.1	106
84.1	107	// ✓ SOLID GREEN: The device is alive with a LoRaWAN server connection.//
35.1	108
84.1	109	// ✓ BLINKING GREEN: a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
35.1	110
69.4	111	// ✓ SOLID RED: Device doesn't have an Internet connection.//
35.1	112
84.1	113	(% style="color:blue" %)//➢ WIFI LED//(%%)//: This LED shows the WIFI interface connection status.//
35.1	114
	115
117.2	116	== 1.6 Button Intruction ==
107.2	117
69.3	118
84.1	119	LPS8-V2 has a black toggle button, which is:
	120
	121
	122	(% style="color:blue" %)//➢ //Long press 4-5s : (%%)the gateway will reload the Network and Initialize wifi configuration
	123
	124	// LED status: ETH LED will BLINKIND BULE Until the reload is finished.//
	125
	126
85.1	127	(% style="color:blue" %)//➢ //Long press more than 10s:(%%) //the gateway will restore the factory settings.//
84.1	128
	129	//LED status: ETH LED will SOLID BULE Until the restore is finished.//
	130
107.2	131
117.2	132	= 2. Quick Start =
107.2	133
8.1	134
26.1	135	The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
8.1	136
26.1	137	In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
8.1	138
	139
117.2	140	== 2.1 Connects to the network and accesses the gateway Web UI ==
69.4	141
117.2	142	== 2.1.1 connect the network ==
8.1	143
	144
69.4	145	=== (% style="color:blue" %)Method 1(%%): Connect via Ethernet with DHCP IP from the router ===
26.1	146
69.4	147
69.10	148	(((
122.3	149	Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
69.10	150	)))
26.1	151
69.10	152	(((
35.1	153	You can also use this IP to connect.
69.10	154	)))
35.1	155
	156	[[image:image-20220622100129-1.png\|\|height="332" width="1263"]]
	157
134.2	158
133.1	159	=== (% style="color:blue" %)Method 2(%%): Connect via LPS8-V2 Fallback IP ===
35.1	160
	161
133.1	162	[[image:image-20230107084650-2.png\|\|height="310" width="839"]]
35.1	163
69.4	164
137.1	165	(% style="color:blue" %)Steps to connect via fallback IP:
133.1	166
137.1	167	~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
133.1	168
	169	2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
	170
137.1	171	As in the below photo:
133.1	172
	173	[[image:image-20230107085904-4.png\|\|height="443" width="361"]]
	174
	175	3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
	176
	177
137.1	178	[[image:image-20230111094247-2.png\|\|height="619" width="1250"]]
	179
	180
	181
133.1	182	=== (% style="color:blue" %)Method 3(%%): Connect via WiFi with DHCP IP from the router ===
	183
	184
35.1	185	[[image:image-20220622100542-2.png\|\|height="369" width="1256"]]
	186
	187
69.4	188	Fill in the WiFi information by checking the box and clicking (% style="color:red" %)Save&Apply
35.1	189
	190
	191	[[image:image-20220622102702-6.png]]
	192
	193
69.4	194
35.1	195	Wi-Fi configuration successful
	196
	197
	198	[[image:image-20220622102847-7.png]]
	199
69.4	200
107.2	201	[[image:image-20220622102901-8.png\|\|height="476" width="938"]]
35.1	202
	203
128.1	204	== 2.1.2 Access Configure Web UI ==
122.4	205
	206
	207	Web Interface
	208
	209	Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
	210
	211
134.1	212	[[(% style="background-color:yellow" %)//http:~~/~~/IP_ADDRESS //>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]//(Fallback IP)
122.4	213
	214	You will see the login interface of LPS8-V2 as shown below.
	215
	216	The account details for Web Login are:
	217
	218	(% style="color:#4f81bd" %)User Name: root
	219
	220	(% style="color:#4f81bd" %)Password: dragino
	221
127.1	222	[[image:image-20230106153501-1.png\|\|height="367" width="894"]]
122.4	223
128.2	224
117.2	225	== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
35.1	226
117.2	227	=== 2.2.1 Select your area frequency ===
26.1	228
	229
69.12	230	(((
41.1	231	First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
83.3	232
	233
69.12	234	)))
26.1	235
107.2	236	[[image:image-20220622103332-9.png\|\|height="485" width="938"]]
26.1	237
	238
117.2	239	=== 2.2.2 Get the only gateway EUI ===
69.4	240
41.1	241
	242	Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
	243
83.4	244
107.2	245	[[image:image-20220622103355-10.png\|\|height="698" width="949"]]
41.1	246
	247
69.4	248	(% style="color:red" %)Note: Choose the cluster that corresponds to a specific Gateway server address
41.1	249
69.4	250
41.1	251	➢ Europe 1: corresponding Gateway server address: eu1.cloud.thethings.network
	252
	253	➢ North America 1: corresponding Gateway server address: nam1.cloud.thethings.network
	254
	255	➢ Australia 1: corresponding Gateway server address: au1.cloud.thethings.network
	256
	257	➢ Legacy V2 Console: TTN v2 shuts down in December 2021
	258
	259
	260	[[image:image-20220622103956-12.png]]
	261
	262
117.2	263	== 2.2.3 Register the gateway to The Things Network ==
41.1	264
	265
	266	Login to The Things Network
	267
	268	[[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
	269
69.4	270
41.1	271	Add the gateway
	272
	273	[[image:image-20220622104252-13.png\|\|height="511" width="953"]]
	274
	275
	276	Get it online
	277
	278
117.2	279	= 3. Web Configure Pages =
69.4	280
117.2	281	== 3.1 Home ==
8.1	282
	283
23.1	284	//Shows the system running status~://
15.1	285
107.2	286	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1\|\|alt="image-20220622102901-8.png" height="476" width="939"]]
69.4	287
83.4	288
117.2	289	== 3.2 LoRa Settings ==
107.2	290
117.2	291	=== 3.2.1 LoRa ~-~-> LoRa ===
15.1	292
	293
23.1	294	//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
15.1	295
23.1	296	//Different LPS8v2 hardware versions can support different frequency ranges~://
15.1	297
83.1	298	* (% style="color:#0000ff" %)//868//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
23.1	299	* (% style="color:#0000ff" %)//915//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
8.1	300
23.1	301	(% class="wikigeneratedid" %)
69.4	302	//After the user choose the frequency plan, the user can see the actual frequency is used by checking the page (% style="color:#037691" %)LogRead ~-~-> LoRa Log//
23.1	303
83.4	304
23.1	305	(% class="wikigeneratedid" %)
	306	[[image:image-20220616110739-1.png\|\|height="372" width="682"]]
	307
	308
69.4	309	(((
103.3	310	(% style="color:red" %)//*Note : See this instruction for how to customize the frequency band: //(%%)//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
69.4	311	)))
23.1	312
	313
117.2	314	== 3.3 LoRaWAN Settings ==
23.1	315
117.2	316	=== 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
23.1	317
	318
	319	//This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
	320
83.4	321
23.1	322	[[image:image-20220616111932-2.png\|\|height="516" width="672"]]
	323
	324
117.2	325	=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
69.5	326
23.1	327
	328	//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
	329
83.4	330
23.1	331	[[image:image-20220616113246-3.png\|\|height="396" width="672"]]
	332
	333
69.12	334	(((
103.4	335	Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
69.12	336	)))
23.1	337
	338
117.2	339	== 3.4 Network Settings ==
69.5	340
117.2	341	=== 3.4.1 Network ~-~-> WiFi ===
23.1	342
	343
	344	[[image:image-20220616114756-4.png\|\|height="251" width="669"]]
	345
	346
117.2	347	=== 3.4.2 Network ~-~-> System Status ===
69.5	348
23.1	349
83.1	350	[[image:image-20220820134112-2.png\|\|height="539" width="668"]]
23.1	351
	352
146.1	353	=== 3.4.3 Network ~-~-> Network ===
69.5	354
23.1	355
146.1	356	In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
23.1	357
146.1	358	[[image:image-20230214093657-2.png\|\|height="333" width="858"]]
23.1	359
146.1	360
155.1	361	=== 3.4.4 Network ~-~-> Cellular ===
	362
	363
	364	In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
	365
156.1	366	(% style="color:red" %)Note: APN cannot be empty.
	367
155.1	368	[[image:image-20230228115126-1.png]]
	369
	370
	371	After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
	372
	373	[[image:image-20230228115535-2.png\|\|height="478" width="888"]]
	374
156.2	375
117.2	376	== 3.5 System ==
69.5	377
122.1	378	=== 3.5.1 System ~-~-> System Overview ===
23.1	379
	380
	381	Shows the system info:
	382
109.2	383	[[image:image-20220917144512-5.png\|\|height="618" width="853"]]
23.1	384
69.5	385
127.1	386	=== 3.5.2 System ~-~-> System General ===
107.2	387
23.1	388
133.1	389	In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
127.1	390
146.1	391	In addition, Users can customize the FallBack IP address.
127.1	392
146.1	393	[[image:image-20230214094058-3.png]]
127.1	394
146.1	395
127.1	396	=== 3.5.3 System ~-~-> Backup/Restore ===
	397
	398
109.2	399	[[image:image-20220917144725-6.png\|\|height="208" width="869"]]
23.1	400
	401
127.1	402	=== 3.5.4 System ~-~-> Remoteit ===
121.1	403
	404
	405	In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
	406
	407
	408	the users can refer to this link to configure them: [[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]
	409
	410	[[image:image-20221230092303-2.png]]
	411
	412
147.1	413	=== 3.5.5 System ~-~-> Package Management ===
146.1	414
	415
	416	In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
	417
	418	[[image:image-20230214094316-4.png]]
	419
	420
117.2	421	= 4. Build-in Server =
23.1	422
53.1	423
83.1	424	The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)Node-Red, and(%%) LoRaWAN Server: (% style="color:blue" %)The Things Network - Stack (Open Source 3.19 Version).
53.1	425
83.4	426
149.1	427	[[image:image-20230214095318-5.png\|\|height="347" width="980"]]
53.1	428
	429
83.4	430	(% style="color:red" %)Note:
58.1	431
83.1	432	Path: System ~-~-> Built-in Server
58.1	433
	434
83.1	435	Troubleshooting:
59.1	436
60.1	437
83.1	438	~ 1. URL does not jump properly
60.1	439
86.1	440	For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
60.1	441
86.1	442	For the Node-Red, you can use the local IP address and the port is 1880 to access it.
57.1	443
	444
117.2	445	== 4.1 LoRaWAN Network Server ~-~- The Things Network - Stack (TTN-V3) ==
83.4	446
58.1	447
109.3	448	You can access the gateway's built-in LNS server of (% style="color:blue" %)The Things Network - Stack (%%)via the URL( (% style="background-color:yellow" %)__//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //__(%%)) in your browser.
69.5	449
83.1	450	Such as (% style="background-color:yellow" %)__//http:~/~/dragino-54ff12:8080 or http:~/~/<Local-IPV4-Address>//__
67.1	451
	452
83.1	453	Login account:
69.5	454
83.1	455	User ID: (% style="background-color:yellow" %)admin(%%)
53.1	456
83.1	457	Password: (% style="background-color:yellow" %)dragino(%%)
53.1	458
59.1	459
83.1	460	[[image:image-20220725171719-1.png\|\|height="570" width="769"]]
59.1	461
	462
117.2	463	== 4.2 Application Server ~-~- Node-Red ==
60.1	464
69.6	465
109.3	466	You can access the gateway's built-in AS server of (% style="color:blue" %)Node-Red (%%)via the URL((% style="background-color:yellow" %)__//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//__(%%)) in your browser.
53.1	467
	468
87.1	469	Such as (% style="background-color:yellow" %)__//http:~/~/dragino-54ff12:1880 or http:~/~/<Local-IPV4-Address>//__
61.1	470
	471
83.1	472	[[image:image-20220725172124-3.png\|\|height="610" width="843"]]
61.1	473
	474
	475
117.2	476	=== Using Node-Red, InfluxDB and Grafana ===
115.1	477
116.1	478	The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
115.1	479
116.1	480
	481	the users can refer to this link to install them.
	482
	483	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
	484
139.1	485
138.1	486	== 4.3 How to disable the built-in server ==
116.1	487
138.1	488
	489	Use the following commands to start and stop the TTNv3 service:
	490
	491	(% class="box infomessage" %)
	492	(((
	493	# start
	494	systemctl start ttnstack
	495
	496	# stop
	497	systemctl stop ttnstack
	498
	499	# enable
	500	systemctl enable ttnstack
	501
	502	#disable
	503	systemctl disable ttnstack
	504	)))
	505
	506	Use the following commands to start and stop the Node-Red service:
	507
	508	(% class="box infomessage" %)
	509	(((
	510	# start
	511	systemctl start nodered
	512
	513	# stop
	514	systemctl stop nodered
	515
	516	# enable
	517	systemctl enable nodered
	518
	519	#disable
	520	systemctl disable nodered
	521	)))
	522
139.1	523
141.1	524	== 4.4 How to use ChirpStack on LPS8-V2 ==
138.1	525
	526
	527	By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
	528
152.1	529	[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
	530
151.1	531	[[image:image-20230222094908-1.png\|\|height="133" width="798"]]
138.1	532
140.1	533
141.1	534	= 5. How users can access LPS8-V2 using serial USB =
69.6	535
74.1	536
141.1	537	(% style="color:blue" %)USB TTL to LPS8-V2 Connection:
74.1	538
109.3	539
141.1	540	Port 1 of the UART on the LPS8-V2 is GND
74.1	541
79.1	542	(% class="box infomessage" %)
	543	(((
107.2	544	TXD <~-~--> UART RXD (Gray line)
74.1	545
107.2	546	RXD <~-~--> UART TXD (White line)
74.1	547
107.2	548	GND <~-~--> GND (Black line)
79.1	549	)))
74.1	550
	551
77.1	552	LPS8v2 UART connection photo
	553
	554	[[image:image-20220804163015-1.png\|\|height="621" width="466"]]
	555
	556
78.1	557	In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)115200(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
77.1	558
83.4	559
77.1	560	[[image:image-20220804164928-3.png\|\|height="320" width="332"]]
	561
83.4	562
77.1	563	[[image:image-20220804164747-2.png\|\|height="622" width="594"]]
	564
83.4	565
117.2	566	= 6. Use the helium gateway-rs as the Data-only Hotspot =
107.2	567
83.4	568
102.1	569	== Step 1: Configure Frequency Band ==
	570
	571
	572	//Each country has a requirement for frequency region. Choose the right one for your area.//
	573
	574	[[image:image-20220905164308-1.png]]
	575
	576
107.2	577
103.5	578	== Step 2: Configure the forward address ==
102.1	579
	580
	581	Select one of the servers to configure.
	582
	583	For example:
	584
	585	[[image:image-20220905164847-2.png]]
	586
	587
107.2	588
103.5	589	== Step 3: Download and Install the Helium-gateway-rs ==
102.1	590
	591
	592	Access the gateway CLI via SSH.
	593
	594	[[image:image-20220905165222-3.png]]
	595
	596
	597	Download gateway-rs.
	598
	599	[[image:image-20220905165715-5.png]]
	600
	601	(% class="box infomessage" %)
	602	(((
103.7	603	Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]
102.1	604	)))
	605
	606
	607	Install gateway-rs.
	608
	609	[[image:image-20220905165917-7.png]]
	610
	611	(% class="box infomessage" %)
	612	(((
103.7	613	Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb
102.1	614	)))
	615
	616
	617	Modify configuration.
	618
	619
	620	[[image:image-20220905173847-12.png]]
	621
	622
	623	(% class="box infomessage" %)
	624	(((
103.7	625	**region=<Enter regional parameters> \
102.1	626	&& sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
103.7	627	&& sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
102.1	628	)))
	629
	630
	631	Restart the helium_gateway
	632
	633	[[image:image-20220905170920-9.png]]
	634
	635
	636	(% class="box infomessage" %)
	637	(((
103.7	638	systemctl restart helium_gateway
102.1	639	)))
	640
	641
103.7	642	Check the helium_gateway Log：
102.1	643
	644	[[image:image-20220905173952-13.png]]
	645
	646
	647	(% class="box infomessage" %)
	648	(((
103.7	649	journalctl -u helium_gateway -f
102.1	650	)))
	651
	652
103.8	653	(% style="color:red" %)Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.
102.1	654
	655	where the helium gateway log is shown:
	656
	657	[[image:image-20220905174534-14.png]]
	658
	659
103.8	660	So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome\|\|anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
102.1	661
	662
117.2	663	= 7. OTA System Update =
107.2	664
23.1	665
117.1	666	LPS8v2 supports system auto update via OTA, please see [[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]] for the detail of this feature.
69.6	667
112.1	668
117.2	669	= 8. Trouble Shooting =
112.1	670
117.1	671	== 8.1 I can't log in to the built-in Server TTN Stack which shows 'Login failed'. ==
	672
	673
113.1	674	[[image:image-20220920135918-1.png]]
112.1	675
113.2	676
112.1	677	This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
	678
	679	By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
	680
	681
	682	So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
	683
	684	Click the update URL button to configure the URL with the current eth port address.
	685
	686	[[image:image-20220920141936-2.png]]
	687
	688
117.2	689	= (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
112.1	690
	691
14.1	692	(((
	693	//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//
	694	)))
8.1	695
14.1	696	(((
	697	//With your question as detailed as possible. We will reply and help you in the shortest.//
15.1	698
50.1	699
117.2	700	= 10. Reference =
69.6	701
50.1	702
52.1	703	* Install Tago Core: Refer Install Tago Core in LPS8v2 in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
80.1	704	* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
50.1	705
156.2	706
15.1	707
14.1	708	)))
8.1	709
117.2	710	= 11. Order Info =
8.1	711
69.6	712
42.1	713	(% style="color:#0000ff" %)LPS8v2-XXX-YYY
8.1	714
14.1	715	(% style="color:#0000ff" %)XXX(% style="color:black" %): Frequency Band
8.1	716
69.6	717	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	718	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	719	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	720	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	721	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	722	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
8.1	723
42.1	724	(% style="color:#0000ff" %)YYY(% style="color:black" %): 4G Cellular Option
	725
69.6	726	* (% style="color:red" %)E(%%): EMEA, Korea, Thailand, India.
	727	* (% style="color:red" %)A(%%): North America/ Rogers/AT&T/T-Mobile.
	728	* (% style="color:red" %)AU(%%): Latin America, New Zeland, Taiwan
	729	* (% style="color:red" %)J(%%): Japan, DOCOMO/SoftBank/ KDDI
42.1	730
	731	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
	732
	733
117.2	734	= 12. Manufacturer Info =
69.6	735
8.1	736
	737	Shenzhen Dragino Technology Development co. LTD
	738
	739	Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8 CaiYunRoad
	740
	741	LongCheng Street, LongGang District ; Shenzhen 518116,China
	742
	743
117.2	744	= 13. FCC Warning =
69.6	745
8.1	746
69.12	747	(((
8.1	748	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
69.12	749	)))
8.1	750
69.12	751	(((
8.1	752	~-~- Reorient or relocate the receiving antenna.
69.12	753	)))
8.1	754
69.12	755	(((
8.1	756	~-~- Increase the separation between the equipment and receiver.
69.12	757	)))
8.1	758
69.12	759	(((
8.1	760	~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
69.12	761	)))
8.1	762
69.12	763	(((
8.1	764	~-~- Consult the dealer or an experienced radio/TV technician for help.
69.12	765	)))
8.1	766
	767
69.12	768	(((
8.1	769	Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
69.12	770	)))
8.1	771
	772
69.12	773	(((
8.1	774	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
83.4	775
	776
8.1	777	)))
69.12	778	)))

Wiki source code of LPS8v2 LoRaWAN Indoor Gateway User Manual

Applications

Navigation