Wiki source code of HP0C

Version 15.1 by Kilight Cao on 2022/06/16 11:03

version	line-number	content
3.1	1	(% style="text-align:center" %)
	2	[[image:1652876189638-864.png]]
4.1	3
	4
	5
	6	(((
12.1	7	LPS8v2 User Manual
4.1	8
	9
	10	)))
5.1	11
	12	Table of Contents：
	13
	14	{{toc/}}
	15
11.1	16	= 1. Introduction =
5.1	17
12.1	18	== 1.1 What is LPS8v2 ==
5.1	19
	20	(((
6.2	21	The HP0C is an open-source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
	22
	23
	24	HP0C has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.
	25
	26
11.1	27	== 1.2 Specifications ==
6.2	28
	29	Hardware System:
	30
	31	Linux Part:
	32
	33	* Dragino H3-Core Linux Module
	34
	35	* Quad-core Cortex-A7 1.2Ghz
	36
	37	* RAM: 512MB
	38
	39	* eMMC: 4GB
	40
	41	Interface:
	42
	43	* 10M/100M RJ45 Ports x 1
	44	* LoRaWAN Wireless
	45
	46	Operating Condition:
	47
	48	* Work Temperature: -20 ~~ 65°C
	49	* Storage Temperature: -20 ~~ 65°C
	50	* Power Input: 5V 2A, DC
	51
11.1	52	== 1.3 Features ==
6.2	53
	54	* Open Source Debian system
	55	* Managed by Web GUI, SSH via WAN or WiFi
	56	* Remote access with Reverse-SSH
	57	* Emulates 49x LoRa demodulators
	58	* LoRaWAN Gateway
	59	* 10 programmable parallel demodulation paths
	60	* Pre-configure to support different LoRaWAN regional settings.
11.1	61	* Allow customizing LoRaWAN regional parameters.
6.2	62	* Support Local decode ABP end node info and transfer to MQTT server
11.1	63	* Support different level login.
6.2	64
	65	World Widely. Include US and EU
	66
11.1	67	== 1.4 Block Diagram ==
6.2	68
	69
11.1	70	= 2. Connect LPS8v2 Web UI =
8.1	71
	72
11.1	73	//Connect the LPS8v2 Ethernet port to your router and LPS8v2 will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the LPS8v2.//
8.1	74
	75
11.1	76	//If you get the IP address from the router, like: (% class="mark" %)10.130.2.123(%%), you can use this IP address to connect the WEB UI or SSH access of LPS8v2.//
8.1	77
	78
	79
	80
15.1	81	= 3. Web Configure Pages =
8.1	82
	83
15.1	84	== 3.1 Home ==
11.1	85
15.1	86	Shows the system running status:
	87
	88	== 3.2 LoRa Settings ==
	89
	90
	91	== 3.2.1 LoRa ~-~-> LoRa ==
	92
	93	This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.
	94
	95	Different LPS8 hardware versions can support different frequency ranges:
	96
	97	* (% style="color:#0000ff" %)868(% style="color:black" %): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
	98	* (% style="color:#0000ff" %)915(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
	99
14.1	100	= 10. Supports =
8.1	101
14.1	102	(((
	103	//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//
	104	)))
8.1	105
14.1	106	(((
	107	//With your question as detailed as possible. We will reply and help you in the shortest.//
15.1	108
	109
14.1	110	)))
8.1	111
14.1	112	= 10. Order Info =
8.1	113
14.1	114	(% style="color:#0000ff" %)LPS8v2-XXX
8.1	115
14.1	116	(% style="color:#0000ff" %)XXX(% style="color:black" %): Frequency Band
8.1	117
	118	* AS923: LoRaWAN AS923 band
	119	* AU915: LoRaWAN AU915 band
	120	* EU868: LoRaWAN EU868 band
	121	* KR920: LoRaWAN KR920 band
	122	* US915: LoRaWAN US915 band
	123	* IN865: LoRaWAN IN865 band
	124
14.1	125	= 11. Manufacturer Info =
8.1	126
	127	Shenzhen Dragino Technology Development co. LTD
	128
	129	Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8 CaiYunRoad
	130
	131	LongCheng Street, LongGang District ; Shenzhen 518116,China
	132
	133
14.1	134	= 12. FCC Warning =
8.1	135
	136	This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
	137
	138	~-~- Reorient or relocate the receiving antenna.
	139
	140	~-~- Increase the separation between the equipment and receiver.
	141
	142	~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
	143
	144	~-~- Consult the dealer or an experienced radio/TV technician for help.
	145
	146
	147	Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
	148
	149
	150	The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
	151	)))

Wiki source code of HP0C

Applications

Navigation