Skip to Content
Version 130.1 by Kilight Cao on 2023/01/07 08:46
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
Xiaoling 128.2 67
68
Xiaoling 117.2 69 == 1.3 Features ==
70
71
Xiaoye 6.2 72 * Open Source Debian system
73 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 74 * Remote Management
Edwin Chen 49.1 75 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 76 * LoRaWAN Gateway
77 * 10 programmable parallel demodulation paths
Xiaoye 26.1 78 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 79 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 80 * Different kinds of LoRaWAN Connections such as
81 ** Semtech UDP Packet Forwarder
82 ** LoRaWAN Basic Station
83 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 84 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 86
Xiaoling 128.2 87
88
Xiaoling 117.2 89 == 1.4 Block Diagram ==
Xiaoling 69.3 90
Xiaoye 35.1 91
Xiaoling 69.3 92
Xiaoling 117.2 93 == 1.5 LED Indicators ==
94
95
Xiaoye 35.1 96 LPS8-V2 has totally four LEDs, They are:
97
98
Xiaoling 69.3 99 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 100
Xiaoling 107.3 101 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 102
Xiaoling 107.3 103 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 104
Xiaoye 84.1 105 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 106
Xiaoye 84.1 107 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 108
Xiaoling 69.4 109 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 110
Xiaoye 84.1 111 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 112
113
Xiaoling 117.2 114 == 1.6 Button Intruction ==
Xiaoling 107.2 115
Xiaoling 69.3 116
Xiaoye 84.1 117 LPS8-V2 has a black toggle button, which is:
118
119
120 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121
122 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123
124
Xiaoye 85.1 125 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 126
127 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128
Xiaoling 107.2 129
Xiaoling 117.2 130 = 2. Quick Start =
Xiaoling 107.2 131
Xiaoye 8.1 132
Xiaoye 26.1 133 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 134
Xiaoye 26.1 135 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 136
137
Xiaoling 117.2 138 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 139
Xiaoling 117.2 140 == 2.1.1 connect the network ==
Xiaoye 8.1 141
142
Xiaoling 69.4 143 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 144
Xiaoling 69.4 145
Xiaoling 69.10 146 (((
Xiaoling 122.3 147 Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 148 )))
Xiaoye 26.1 149
Xiaoling 69.10 150 (((
Xiaoye 35.1 151 You can also use this IP to connect.
Xiaoling 69.10 152 )))
Xiaoye 35.1 153
154 [[image:image-20220622100129-1.png||height="332" width="1263"]]
155
156
157
Xiaoling 69.4 158 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 159
Xiaoling 69.4 160
Xiaoye 35.1 161 [[image:image-20220622100542-2.png||height="369" width="1256"]]
162
163
Xiaoling 69.4 164 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 165
166
167 [[image:image-20220622102702-6.png]]
168
169
Xiaoling 69.4 170
Xiaoye 35.1 171 **Wi-Fi configuration successful**
172
173
174 [[image:image-20220622102847-7.png]]
175
Xiaoling 69.4 176
Xiaoling 107.2 177 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 178
179
Kilight Cao 128.1 180 == 2.1.2 Access Configure Web UI ==
Kilight Cao 122.4 181
182
183 **Web Interface**
184
185 Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
186
187
Kilight Cao 124.1 188 [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
Kilight Cao 122.4 189
190 You will see the login interface of LPS8-V2 as shown below.
191
192 The account details for Web Login are:
193
194 (% style="color:#4f81bd" %)**User Name: root**
195
196 (% style="color:#4f81bd" %)**Password:   dragino**
197
Kilight Cao 127.1 198 [[image:image-20230106153501-1.png||height="367" width="894"]]
Kilight Cao 122.4 199
Xiaoling 128.2 200
Xiaoling 117.2 201 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 202
Xiaoling 117.2 203 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 204
205
Xiaoling 69.12 206 (((
Xiaoye 41.1 207 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 208
209
Xiaoling 69.12 210 )))
Xiaoye 26.1 211
Xiaoling 107.2 212 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 213
214
Xiaoling 117.2 215 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 216
Xiaoye 41.1 217
218 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
219
Xiaoling 83.4 220
Xiaoling 107.2 221 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 222
223
Xiaoling 69.4 224 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 225
Xiaoling 69.4 226
Xiaoye 41.1 227 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
228
229 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
230
231 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
232
233 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
234
235
236 [[image:image-20220622103956-12.png]]
237
238
Xiaoling 117.2 239 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 240
241
242 **Login to The Things Network**
243
244 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
245
Xiaoling 69.4 246
Xiaoye 41.1 247 **Add the gateway**
248
249 [[image:image-20220622104252-13.png||height="511" width="953"]]
250
251
252 **Get it online**
253
254
Xiaoling 117.2 255 = 3. Web Configure Pages =
Xiaoling 69.4 256
Xiaoling 117.2 257 == 3.1 Home ==
Xiaoye 8.1 258
259
Kilight Cao 23.1 260 //Shows the system running status~://
Kilight Cao 15.1 261
Xiaoling 107.2 262 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 263
Xiaoling 83.4 264
Xiaoling 117.2 265 == 3.2 LoRa Settings ==
Xiaoling 107.2 266
Xiaoling 117.2 267 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 268
269
Kilight Cao 23.1 270 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 271
Kilight Cao 23.1 272 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 273
Xiaoye 83.1 274 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 275 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 276
Kilight Cao 23.1 277 (% class="wikigeneratedid" %)
Xiaoling 69.4 278 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 279
Xiaoling 83.4 280
Kilight Cao 23.1 281 (% class="wikigeneratedid" %)
282 [[image:image-20220616110739-1.png||height="372" width="682"]]
283
284
Xiaoling 69.4 285 (((
Xiaoling 103.3 286 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 287 )))
Kilight Cao 23.1 288
289
Xiaoling 117.2 290 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 291
Xiaoling 117.2 292 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 293
294
295 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
296
Xiaoling 83.4 297
Kilight Cao 23.1 298 [[image:image-20220616111932-2.png||height="516" width="672"]]
299
300
Xiaoling 117.2 301 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 302
Kilight Cao 23.1 303
304 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
305
Xiaoling 83.4 306
Kilight Cao 23.1 307 [[image:image-20220616113246-3.png||height="396" width="672"]]
308
309
Xiaoling 69.12 310 (((
Xiaoling 103.4 311 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 312 )))
Kilight Cao 23.1 313
314
Xiaoling 117.2 315 == 3.4 Network Settings ==
Xiaoling 69.5 316
Xiaoling 117.2 317 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 318
319
320 [[image:image-20220616114756-4.png||height="251" width="669"]]
321
322
Xiaoling 117.2 323 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 324
Kilight Cao 23.1 325
Xiaoye 83.1 326 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 327
328
Xiaoling 117.2 329 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 330
Kilight Cao 23.1 331
332 [[image:image-20220616115351-6.png||height="244" width="661"]]
333
334
Xiaoling 117.2 335 == 3.5 System ==
Xiaoling 69.5 336
Kilight Cao 122.1 337 === 3.5.1 System ~-~-> System Overview ===
Kilight Cao 23.1 338
339
340 Shows the system info:
341
Xiaoling 109.2 342 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 343
Xiaoling 69.5 344
Kilight Cao 127.1 345 === 3.5.2 System ~-~-> System General ===
Xiaoling 107.2 346
Kilight Cao 23.1 347
Kilight Cao 127.1 348 In the System-> System General interface, Users can customize the configuration System Password.
349
350 [[image:image-20230106154302-2.png||height="345" width="868"]]
351
352
353 === 3.5.3 System ~-~-> Backup/Restore ===
354
355
Xiaoling 109.2 356 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 357
358
Kilight Cao 127.1 359 === 3.5.4 System ~-~-> Remoteit ===
Kilight Cao 121.1 360
361
362 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
363
364
365 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
366
367 [[image:image-20221230092303-2.png]]
368
369
Xiaoling 117.2 370 = 4. Build-in Server =
Kilight Cao 23.1 371
Xiaoye 53.1 372
Xiaoye 83.1 373 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 374
Xiaoling 83.4 375
Xiaoling 107.2 376 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 377
378
Xiaoling 83.4 379 (% style="color:red" %)**Note:**
Kilight Cao 58.1 380
Xiaoye 83.1 381 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 382
383
Xiaoye 83.1 384 **Troubleshooting:**
Kilight Cao 59.1 385
Xiaoye 60.1 386
Xiaoye 83.1 387 **~ 1. URL does not jump properly**
Xiaoye 60.1 388
Kilight Cao 86.1 389 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 390
Kilight Cao 86.1 391 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 392
393
Xiaoling 117.2 394 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 395
Kilight Cao 58.1 396
Xiaoling 109.3 397 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 398
Xiaoye 83.1 399 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 400
401
Xiaoye 83.1 402 Login account:
Xiaoling 69.5 403
Xiaoye 83.1 404 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 405
Xiaoye 83.1 406 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 407
Kilight Cao 59.1 408
Xiaoye 83.1 409 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 410
411
Xiaoling 117.2 412 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 413
Xiaoling 69.6 414
Xiaoling 109.3 415 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 416
417
Kilight Cao 87.1 418 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 419
420
Xiaoye 83.1 421 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 422
423
424
Xiaoling 117.2 425 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 426
Xiaoye 116.1 427 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 428
Xiaoye 116.1 429
430 the users can refer to this link to install them.
431
432 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
433
434
Xiaoling 117.2 435 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 436
Kilight Cao 74.1 437
Xiaoling 109.3 438 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 439
Xiaoling 109.3 440
Kilight Cao 74.1 441 Port 1 of the UART on the LPS8v2 is GND
442
Kilight Cao 79.1 443 (% class="box infomessage" %)
444 (((
Xiaoling 107.2 445 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 446
Xiaoling 107.2 447 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 448
Xiaoling 107.2 449 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 450 )))
Kilight Cao 74.1 451
452
Kilight Cao 77.1 453 **LPS8v2 UART connection photo**
454
455 [[image:image-20220804163015-1.png||height="621" width="466"]]
456
457
Kilight Cao 78.1 458 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 459
Xiaoling 83.4 460
Kilight Cao 77.1 461 [[image:image-20220804164928-3.png||height="320" width="332"]]
462
Xiaoling 83.4 463
Kilight Cao 77.1 464 [[image:image-20220804164747-2.png||height="622" width="594"]]
465
Xiaoling 83.4 466
Xiaoling 117.2 467 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 468
Xiaoling 83.4 469
Xiaoye 102.1 470 == **Step 1: Configure Frequency Band** ==
471
472
473 //Each country has a requirement for frequency region. Choose the right one for your area.//
474
475 [[image:image-20220905164308-1.png]]
476
477
Xiaoling 107.2 478
Xiaoling 103.5 479 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 480
481
482 **Select one of the servers to configure.**
483
484 **For example:**
485
486 [[image:image-20220905164847-2.png]]
487
488
Xiaoling 107.2 489
Xiaoling 103.5 490 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 491
492
493 **Access the gateway CLI via SSH.**
494
495 [[image:image-20220905165222-3.png]]
496
497
498 **Download gateway-rs.**
499
500 [[image:image-20220905165715-5.png]]
501
502 (% class="box infomessage" %)
503 (((
Xiaoling 103.7 504 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 505 )))
506
507
508 **Install gateway-rs.**
509
510 [[image:image-20220905165917-7.png]]
511
512 (% class="box infomessage" %)
513 (((
Xiaoling 103.7 514 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 515 )))
516
517
518 **Modify configuration.**
519
520
521 [[image:image-20220905173847-12.png]]
522
523
524 (% class="box infomessage" %)
525 (((
Xiaoling 103.7 526 **region=<Enter regional parameters> \
Xiaoye 102.1 527 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 528 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 529 )))
530
531
532 **Restart the helium_gateway**
533
534 [[image:image-20220905170920-9.png]]
535
536
537 (% class="box infomessage" %)
538 (((
Xiaoling 103.7 539 **systemctl restart helium_gateway**
Xiaoye 102.1 540 )))
541
542
Xiaoling 103.7 543 **Check the helium_gateway Log：**
Xiaoye 102.1 544
545 [[image:image-20220905173952-13.png]]
546
547
548 (% class="box infomessage" %)
549 (((
Xiaoling 103.7 550 **journalctl -u helium_gateway -f**
Xiaoye 102.1 551 )))
552
553
Xiaoling 103.8 554 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 555
556 where the helium gateway log is shown:
557
558 [[image:image-20220905174534-14.png]]
559
560
Xiaoling 103.8 561 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 562
563
Xiaoling 117.2 564 = 7. OTA System Update =
Xiaoling 107.2 565
Kilight Cao 23.1 566
Kilight Cao 117.1 567 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 568
Xiaoye 112.1 569
Xiaoling 117.2 570 = 8. Trouble Shooting =
Xiaoye 112.1 571
Kilight Cao 117.1 572 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
573
574
Xiaoye 113.1 575 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 576
Xiaoling 113.2 577
Xiaoye 112.1 578 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
579
580 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
581
582
583 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
584
585 **Click the update URL button to configure the URL with the current eth port address.**
586
587 [[image:image-20220920141936-2.png]]
588
589
Xiaoling 117.2 590 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 591
592
Kilight Cao 14.1 593 (((
594 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
595 )))
Xiaoye 8.1 596
Kilight Cao 14.1 597 (((
598 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 599
Edwin Chen 50.1 600
Xiaoling 117.2 601 = 10. Reference =
Xiaoling 69.6 602
Edwin Chen 50.1 603
Edwin Chen 52.1 604 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 605 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 606
Xiaoling 128.2 607
Kilight Cao 15.1 608
Kilight Cao 14.1 609 )))
Xiaoye 8.1 610
Xiaoling 117.2 611 = 11. Order Info =
Xiaoye 8.1 612
Xiaoling 69.6 613
Edwin Chen 42.1 614 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 615
Kilight Cao 14.1 616 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 617
Xiaoling 69.6 618 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
619 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
620 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
621 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
622 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
623 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 624
Edwin Chen 42.1 625 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
626
Xiaoling 69.6 627 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
628 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
629 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
630 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 631
632 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
633
634
Xiaoling 117.2 635 = 12. Manufacturer Info =
Xiaoling 69.6 636
Xiaoye 8.1 637
638 **Shenzhen Dragino Technology Development co. LTD**
639
640 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
641
642 LongCheng Street, LongGang District ; Shenzhen 518116,China
643
644
Xiaoling 117.2 645 = 13. FCC Warning =
Xiaoling 69.6 646
Xiaoye 8.1 647
Xiaoling 69.12 648 (((
Xiaoye 8.1 649 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 650 )))
Xiaoye 8.1 651
Xiaoling 69.12 652 (((
Xiaoye 8.1 653 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 654 )))
Xiaoye 8.1 655
Xiaoling 69.12 656 (((
Xiaoye 8.1 657 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 658 )))
Xiaoye 8.1 659
Xiaoling 69.12 660 (((
Xiaoye 8.1 661 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 662 )))
Xiaoye 8.1 663
Xiaoling 69.12 664 (((
Xiaoye 8.1 665 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 666 )))
Xiaoye 8.1 667
668
Xiaoling 69.12 669 (((
Xiaoye 8.1 670 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 671 )))
Xiaoye 8.1 672
673
Xiaoling 69.12 674 (((
Xiaoye 8.1 675 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 676
677
Xiaoye 8.1 678 )))
Xiaoling 69.12 679 )))