Skip to Content
Version 124.1 by Kilight Cao on 2023/01/06 15:35
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
Xiaoling 117.2 67 == 1.3 Features ==
68
69
Xiaoye 6.2 70 * Open Source Debian system
71 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 72 * Remote Management
Edwin Chen 49.1 73 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 74 * LoRaWAN Gateway
75 * 10 programmable parallel demodulation paths
Xiaoye 26.1 76 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 77 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 78 * Different kinds of LoRaWAN Connections such as
79 ** Semtech UDP Packet Forwarder
80 ** LoRaWAN Basic Station
81 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 82 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 84
Xiaoling 117.2 85 == 1.4 Block Diagram ==
Xiaoling 69.3 86
Xiaoye 35.1 87
Xiaoling 69.3 88
Xiaoling 117.2 89 == 1.5 LED Indicators ==
90
91
Xiaoye 35.1 92 LPS8-V2 has totally four LEDs, They are:
93
94
Xiaoling 69.3 95 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 96
Xiaoling 107.3 97 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 98
Xiaoling 107.3 99 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 100
Xiaoye 84.1 101 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 102
Xiaoye 84.1 103 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 104
Xiaoling 69.4 105 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 106
Xiaoye 84.1 107 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 108
109
Xiaoling 117.2 110 == 1.6 Button Intruction ==
Xiaoling 107.2 111
Xiaoling 69.3 112
Xiaoye 84.1 113 LPS8-V2 has a black toggle button, which is:
114
115
116 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
117
118 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
119
120
Xiaoye 85.1 121 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 122
123 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
124
Xiaoling 107.2 125
Xiaoling 117.2 126 = 2. Quick Start =
Xiaoling 107.2 127
Xiaoye 8.1 128
Xiaoye 26.1 129 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 130
Xiaoye 26.1 131 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 132
133
Xiaoling 117.2 134 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 135
Xiaoling 117.2 136 == 2.1.1 connect the network ==
Xiaoye 8.1 137
138
Xiaoling 69.4 139 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 140
Xiaoling 69.4 141
Xiaoling 69.10 142 (((
Xiaoling 122.3 143 Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 144 )))
Xiaoye 26.1 145
Xiaoling 69.10 146 (((
Xiaoye 35.1 147 You can also use this IP to connect.
Xiaoling 69.10 148 )))
Xiaoye 35.1 149
150 [[image:image-20220622100129-1.png||height="332" width="1263"]]
151
152
153
Xiaoling 69.4 154 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 155
Xiaoling 69.4 156
Xiaoye 35.1 157 [[image:image-20220622100542-2.png||height="369" width="1256"]]
158
159
Xiaoling 69.4 160 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 161
162
163 [[image:image-20220622102702-6.png]]
164
165
Xiaoling 69.4 166
Xiaoye 35.1 167 **Wi-Fi configuration successful**
168
169
170 [[image:image-20220622102847-7.png]]
171
Xiaoling 69.4 172
Xiaoling 107.2 173 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 174
175
Kilight Cao 122.4 176 === 2.1.2 Access Configure Web UI ===
177
178
179 **Web Interface**
180
181 Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
182
183
Kilight Cao 124.1 184 [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]]
Kilight Cao 122.4 185
186 You will see the login interface of LPS8-V2 as shown below.
187
188 The account details for Web Login are:
189
190 (% style="color:#4f81bd" %)**User Name: root**
191
192 (% style="color:#4f81bd" %)**Password:   dragino**
193
Kilight Cao 124.1 194 [[image:image-20230106153501-1.png]]
Kilight Cao 122.4 195
Xiaoling 117.2 196 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 197
Xiaoling 117.2 198 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 199
200
Xiaoling 69.12 201 (((
Xiaoye 41.1 202 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 203
204
Xiaoling 69.12 205 )))
Xiaoye 26.1 206
Xiaoling 107.2 207 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 208
209
Xiaoling 117.2 210 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 211
Xiaoye 41.1 212
213 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
214
Xiaoling 83.4 215
Xiaoling 107.2 216 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 217
218
Xiaoling 69.4 219 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 220
Xiaoling 69.4 221
Xiaoye 41.1 222 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
223
224 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
225
226 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
227
228 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
229
230
231 [[image:image-20220622103956-12.png]]
232
233
Xiaoling 117.2 234 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 235
236
237 **Login to The Things Network**
238
239 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
240
Xiaoling 69.4 241
Xiaoye 41.1 242 **Add the gateway**
243
244 [[image:image-20220622104252-13.png||height="511" width="953"]]
245
246
247 **Get it online**
248
249
Xiaoling 117.2 250 = 3. Web Configure Pages =
Xiaoling 69.4 251
Xiaoling 117.2 252 == 3.1 Home ==
Xiaoye 8.1 253
254
Kilight Cao 23.1 255 //Shows the system running status~://
Kilight Cao 15.1 256
Xiaoling 107.2 257 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 258
Xiaoling 83.4 259
Xiaoling 117.2 260 == 3.2 LoRa Settings ==
Xiaoling 107.2 261
Xiaoling 117.2 262 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 263
264
Kilight Cao 23.1 265 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 266
Kilight Cao 23.1 267 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 268
Xiaoye 83.1 269 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 270 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 271
Kilight Cao 23.1 272 (% class="wikigeneratedid" %)
Xiaoling 69.4 273 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 274
Xiaoling 83.4 275
Kilight Cao 23.1 276 (% class="wikigeneratedid" %)
277 [[image:image-20220616110739-1.png||height="372" width="682"]]
278
279
Xiaoling 69.4 280 (((
Xiaoling 103.3 281 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 282 )))
Kilight Cao 23.1 283
284
Xiaoling 117.2 285 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 286
Xiaoling 117.2 287 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 288
289
290 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
291
Xiaoling 83.4 292
Kilight Cao 23.1 293 [[image:image-20220616111932-2.png||height="516" width="672"]]
294
295
Xiaoling 117.2 296 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 297
Kilight Cao 23.1 298
299 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
300
Xiaoling 83.4 301
Kilight Cao 23.1 302 [[image:image-20220616113246-3.png||height="396" width="672"]]
303
304
Xiaoling 69.12 305 (((
Xiaoling 103.4 306 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 307 )))
Kilight Cao 23.1 308
309
Xiaoling 117.2 310 == 3.4 Network Settings ==
Xiaoling 69.5 311
Xiaoling 117.2 312 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 313
314
315 [[image:image-20220616114756-4.png||height="251" width="669"]]
316
317
Xiaoling 117.2 318 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 319
Kilight Cao 23.1 320
Xiaoye 83.1 321 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 322
323
Xiaoling 117.2 324 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 325
Kilight Cao 23.1 326
327 [[image:image-20220616115351-6.png||height="244" width="661"]]
328
329
Xiaoling 117.2 330 == 3.5 System ==
Xiaoling 69.5 331
Kilight Cao 122.1 332 === 3.5.1 System ~-~-> System Overview ===
Kilight Cao 23.1 333
334
335 Shows the system info:
336
Xiaoling 109.2 337 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 338
Xiaoling 69.5 339
Xiaoling 117.2 340 === 3.5.2 System ~-~-> Backup/Restore ===
Xiaoling 107.2 341
Kilight Cao 23.1 342
Xiaoling 109.2 343 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 344
345
Kilight Cao 121.1 346 === 3.5.3 System ~-~-> Remoteit ===
347
348
349 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
350
351
352 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
353
354 [[image:image-20221230092303-2.png]]
355
356
Xiaoling 117.2 357 = 4. Build-in Server =
Kilight Cao 23.1 358
Xiaoye 53.1 359
Xiaoye 83.1 360 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 361
Xiaoling 83.4 362
Xiaoling 107.2 363 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 364
365
Xiaoling 83.4 366 (% style="color:red" %)**Note:**
Kilight Cao 58.1 367
Xiaoye 83.1 368 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 369
370
Xiaoye 83.1 371 **Troubleshooting:**
Kilight Cao 59.1 372
Xiaoye 60.1 373
Xiaoye 83.1 374 **~ 1. URL does not jump properly**
Xiaoye 60.1 375
Kilight Cao 86.1 376 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 377
Kilight Cao 86.1 378 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 379
380
Xiaoling 117.2 381 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 382
Kilight Cao 58.1 383
Xiaoling 109.3 384 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 385
Xiaoye 83.1 386 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 387
388
Xiaoye 83.1 389 Login account:
Xiaoling 69.5 390
Xiaoye 83.1 391 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 392
Xiaoye 83.1 393 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 394
Kilight Cao 59.1 395
Xiaoye 83.1 396 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 397
398
Xiaoling 117.2 399 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 400
Xiaoling 69.6 401
Xiaoling 109.3 402 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 403
404
Kilight Cao 87.1 405 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 406
407
Xiaoye 83.1 408 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 409
410
411
Xiaoling 117.2 412 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 413
Xiaoye 116.1 414 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 415
Xiaoye 116.1 416
417 the users can refer to this link to install them.
418
419 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
420
421
Xiaoling 117.2 422 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 423
Kilight Cao 74.1 424
Xiaoling 109.3 425 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 426
Xiaoling 109.3 427
Kilight Cao 74.1 428 Port 1 of the UART on the LPS8v2 is GND
429
Kilight Cao 79.1 430 (% class="box infomessage" %)
431 (((
Xiaoling 107.2 432 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 433
Xiaoling 107.2 434 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 435
Xiaoling 107.2 436 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 437 )))
Kilight Cao 74.1 438
439
Kilight Cao 77.1 440 **LPS8v2 UART connection photo**
441
442 [[image:image-20220804163015-1.png||height="621" width="466"]]
443
444
445
Kilight Cao 78.1 446 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 447
Xiaoling 83.4 448
Kilight Cao 77.1 449 [[image:image-20220804164928-3.png||height="320" width="332"]]
450
Xiaoling 83.4 451
Kilight Cao 77.1 452 [[image:image-20220804164747-2.png||height="622" width="594"]]
453
Xiaoling 83.4 454
Xiaoling 117.2 455 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 456
Xiaoling 83.4 457
Xiaoye 102.1 458 == **Step 1: Configure Frequency Band** ==
459
460
461 //Each country has a requirement for frequency region. Choose the right one for your area.//
462
463 [[image:image-20220905164308-1.png]]
464
465
Xiaoling 107.2 466
Xiaoling 103.5 467 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 468
469
470 **Select one of the servers to configure.**
471
472 **For example:**
473
474 [[image:image-20220905164847-2.png]]
475
476
Xiaoling 107.2 477
Xiaoling 103.5 478 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 479
480
481 **Access the gateway CLI via SSH.**
482
483 [[image:image-20220905165222-3.png]]
484
485
486 **Download gateway-rs.**
487
488 [[image:image-20220905165715-5.png]]
489
490 (% class="box infomessage" %)
491 (((
Xiaoling 103.7 492 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 493 )))
494
495
496 **Install gateway-rs.**
497
498 [[image:image-20220905165917-7.png]]
499
500 (% class="box infomessage" %)
501 (((
Xiaoling 103.7 502 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 503 )))
504
505
506 **Modify configuration.**
507
508
509 [[image:image-20220905173847-12.png]]
510
511
512 (% class="box infomessage" %)
513 (((
Xiaoling 103.7 514 **region=<Enter regional parameters> \
Xiaoye 102.1 515 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 516 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 517 )))
518
519
520 **Restart the helium_gateway**
521
522 [[image:image-20220905170920-9.png]]
523
524
525 (% class="box infomessage" %)
526 (((
Xiaoling 103.7 527 **systemctl restart helium_gateway**
Xiaoye 102.1 528 )))
529
530
Xiaoling 103.7 531 **Check the helium_gateway Log：**
Xiaoye 102.1 532
533 [[image:image-20220905173952-13.png]]
534
535
536 (% class="box infomessage" %)
537 (((
Xiaoling 103.7 538 **journalctl -u helium_gateway -f**
Xiaoye 102.1 539 )))
540
541
Xiaoling 103.8 542 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 543
544 where the helium gateway log is shown:
545
546 [[image:image-20220905174534-14.png]]
547
548
Xiaoling 103.8 549 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 550
551
Xiaoling 117.2 552 = 7. OTA System Update =
Xiaoling 107.2 553
Kilight Cao 23.1 554
Kilight Cao 117.1 555 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 556
Xiaoye 112.1 557
Xiaoling 117.2 558 = 8. Trouble Shooting =
Xiaoye 112.1 559
Kilight Cao 117.1 560 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
561
562
Xiaoye 113.1 563 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 564
Xiaoling 113.2 565
Xiaoye 112.1 566 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
567
568 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
569
570
571 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
572
573 **Click the update URL button to configure the URL with the current eth port address.**
574
575 [[image:image-20220920141936-2.png]]
576
577
Xiaoling 117.2 578 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 579
580
Kilight Cao 14.1 581 (((
582 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
583 )))
Xiaoye 8.1 584
Kilight Cao 14.1 585 (((
586 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 587
Edwin Chen 50.1 588
Xiaoling 117.2 589 = 10. Reference =
Xiaoling 69.6 590
Edwin Chen 50.1 591
Edwin Chen 52.1 592 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 593 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 594
Kilight Cao 15.1 595
Kilight Cao 14.1 596 )))
Xiaoye 8.1 597
Xiaoling 117.2 598 = 11. Order Info =
Xiaoye 8.1 599
Xiaoling 69.6 600
Edwin Chen 42.1 601 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 602
Kilight Cao 14.1 603 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 604
Xiaoling 69.6 605 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
606 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
607 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
608 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
609 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
610 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 611
Edwin Chen 42.1 612 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
613
Xiaoling 69.6 614 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
615 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
616 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
617 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 618
619 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
620
621
Xiaoling 117.2 622 = 12. Manufacturer Info =
Xiaoling 69.6 623
Xiaoye 8.1 624
625 **Shenzhen Dragino Technology Development co. LTD**
626
627 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
628
629 LongCheng Street, LongGang District ; Shenzhen 518116,China
630
631
Xiaoling 117.2 632 = 13. FCC Warning =
Xiaoling 69.6 633
Xiaoye 8.1 634
Xiaoling 69.12 635 (((
Xiaoye 8.1 636 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 637 )))
Xiaoye 8.1 638
Xiaoling 69.12 639 (((
Xiaoye 8.1 640 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 641 )))
Xiaoye 8.1 642
Xiaoling 69.12 643 (((
Xiaoye 8.1 644 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 645 )))
Xiaoye 8.1 646
Xiaoling 69.12 647 (((
Xiaoye 8.1 648 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 649 )))
Xiaoye 8.1 650
Xiaoling 69.12 651 (((
Xiaoye 8.1 652 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 653 )))
Xiaoye 8.1 654
655
Xiaoling 69.12 656 (((
Xiaoye 8.1 657 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 658 )))
Xiaoye 8.1 659
660
Xiaoling 69.12 661 (((
Xiaoye 8.1 662 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 663
664
Xiaoye 8.1 665 )))
Xiaoling 69.12 666 )))