Skip to Content
Version 123.1 by Kilight Cao on 2023/01/06 15:35
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
Xiaoling 117.2 67 == 1.3 Features ==
68
69
Xiaoye 6.2 70 * Open Source Debian system
71 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 72 * Remote Management
Edwin Chen 49.1 73 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 74 * LoRaWAN Gateway
75 * 10 programmable parallel demodulation paths
Xiaoye 26.1 76 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 77 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 78 * Different kinds of LoRaWAN Connections such as
79 ** Semtech UDP Packet Forwarder
80 ** LoRaWAN Basic Station
81 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 82 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
83 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 84
Xiaoling 122.2 85
Xiaoling 117.2 86 == 1.4 Block Diagram ==
Xiaoling 69.3 87
Xiaoye 35.1 88
Xiaoling 69.3 89
Xiaoling 117.2 90 == 1.5 LED Indicators ==
91
92
Xiaoye 35.1 93 LPS8-V2 has totally four LEDs, They are:
94
95
Xiaoling 69.3 96 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 97
Xiaoling 107.3 98 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 99
Xiaoling 107.3 100 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 101
Xiaoye 84.1 102 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 103
Xiaoye 84.1 104 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 105
Xiaoling 69.4 106 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 107
Xiaoye 84.1 108 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 109
110
Xiaoling 117.2 111 == 1.6 Button Intruction ==
Xiaoling 107.2 112
Xiaoling 69.3 113
Xiaoye 84.1 114 LPS8-V2 has a black toggle button, which is:
115
116
117 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
118
119 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
120
121
Xiaoye 85.1 122 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 123
124 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
125
Xiaoling 107.2 126
Xiaoling 117.2 127 = 2. Quick Start =
Xiaoling 107.2 128
Xiaoye 8.1 129
Xiaoye 26.1 130 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 131
Xiaoye 26.1 132 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 133
134
Xiaoling 117.2 135 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 136
Xiaoling 117.2 137 == 2.1.1 connect the network ==
Xiaoye 8.1 138
139
Xiaoling 69.4 140 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 141
Xiaoling 69.4 142
Xiaoling 69.10 143 (((
Xiaoling 122.3 144 Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 145 )))
Xiaoye 26.1 146
Xiaoling 69.10 147 (((
Xiaoye 35.1 148 You can also use this IP to connect.
Xiaoling 69.10 149 )))
Xiaoye 35.1 150
151 [[image:image-20220622100129-1.png||height="332" width="1263"]]
152
153
154
Xiaoling 69.4 155 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 156
Xiaoling 69.4 157
Xiaoye 35.1 158 [[image:image-20220622100542-2.png||height="369" width="1256"]]
159
160
Xiaoling 69.4 161 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 162
163
164 [[image:image-20220622102702-6.png]]
165
166
Xiaoling 69.4 167
Xiaoye 35.1 168 **Wi-Fi configuration successful**
169
170
171 [[image:image-20220622102847-7.png]]
172
Xiaoling 69.4 173
Xiaoling 107.2 174 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 175
176
Kilight Cao 122.4 177 === 2.1.2 Access Configure Web UI ===
178
179
180 **Web Interface**
181
182 Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
183
184
185 **//http:~/~/IP_ADDRESS //**
186
187
188 You will see the login interface of LPS8-V2 as shown below.
189
190 The account details for Web Login are:
191
192 (% style="color:#4f81bd" %)**User Name: root**
193
194 (% style="color:#4f81bd" %)**Password:   dragino**
195
196
Xiaoling 117.2 197 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 198
Xiaoling 117.2 199 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 200
201
Xiaoling 69.12 202 (((
Xiaoye 41.1 203 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 204
205
Xiaoling 69.12 206 )))
Xiaoye 26.1 207
Xiaoling 107.2 208 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 209
210
Xiaoling 117.2 211 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 212
Xiaoye 41.1 213
214 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
215
Xiaoling 83.4 216
Xiaoling 107.2 217 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 218
219
Xiaoling 69.4 220 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 221
Xiaoling 69.4 222
Xiaoye 41.1 223 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
224
225 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
226
227 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
228
229 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
230
231
232 [[image:image-20220622103956-12.png]]
233
234
Xiaoling 117.2 235 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 236
237
238 **Login to The Things Network**
239
240 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
241
Xiaoling 69.4 242
Xiaoye 41.1 243 **Add the gateway**
244
245 [[image:image-20220622104252-13.png||height="511" width="953"]]
246
247
248 **Get it online**
249
250
Xiaoling 117.2 251 = 3. Web Configure Pages =
Xiaoling 69.4 252
Xiaoling 117.2 253 == 3.1 Home ==
Xiaoye 8.1 254
255
Kilight Cao 23.1 256 //Shows the system running status~://
Kilight Cao 15.1 257
Xiaoling 107.2 258 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 259
Xiaoling 83.4 260
Xiaoling 117.2 261 == 3.2 LoRa Settings ==
Xiaoling 107.2 262
Xiaoling 117.2 263 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 264
265
Kilight Cao 23.1 266 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 267
Kilight Cao 23.1 268 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 269
Xiaoye 83.1 270 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 271 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 272
Kilight Cao 23.1 273 (% class="wikigeneratedid" %)
Xiaoling 69.4 274 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 275
Xiaoling 83.4 276
Kilight Cao 23.1 277 (% class="wikigeneratedid" %)
278 [[image:image-20220616110739-1.png||height="372" width="682"]]
279
280
Xiaoling 69.4 281 (((
Xiaoling 103.3 282 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 283 )))
Kilight Cao 23.1 284
285
Xiaoling 117.2 286 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 287
Xiaoling 117.2 288 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 289
290
291 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
292
Xiaoling 83.4 293
Kilight Cao 23.1 294 [[image:image-20220616111932-2.png||height="516" width="672"]]
295
296
Xiaoling 117.2 297 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 298
Kilight Cao 23.1 299
300 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
301
Xiaoling 83.4 302
Kilight Cao 23.1 303 [[image:image-20220616113246-3.png||height="396" width="672"]]
304
305
Xiaoling 69.12 306 (((
Xiaoling 103.4 307 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 308 )))
Kilight Cao 23.1 309
310
Xiaoling 117.2 311 == 3.4 Network Settings ==
Xiaoling 69.5 312
Xiaoling 117.2 313 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 314
315
316 [[image:image-20220616114756-4.png||height="251" width="669"]]
317
318
Xiaoling 117.2 319 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 320
Kilight Cao 23.1 321
Xiaoye 83.1 322 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 323
324
Xiaoling 117.2 325 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 326
Kilight Cao 23.1 327
328 [[image:image-20220616115351-6.png||height="244" width="661"]]
329
330
Xiaoling 117.2 331 == 3.5 System ==
Xiaoling 69.5 332
Kilight Cao 122.1 333 === 3.5.1 System ~-~-> System Overview ===
Kilight Cao 23.1 334
335
336 Shows the system info:
337
Xiaoling 109.2 338 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 339
Xiaoling 69.5 340
Xiaoling 117.2 341 === 3.5.2 System ~-~-> Backup/Restore ===
Xiaoling 107.2 342
Kilight Cao 23.1 343
Xiaoling 109.2 344 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 345
346
Kilight Cao 121.1 347 === 3.5.3 System ~-~-> Remoteit ===
348
349
350 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
351
352
353 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
354
355 [[image:image-20221230092303-2.png]]
356
357
Xiaoling 117.2 358 = 4. Build-in Server =
Kilight Cao 23.1 359
Xiaoye 53.1 360
Xiaoye 83.1 361 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 362
Xiaoling 83.4 363
Xiaoling 107.2 364 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 365
366
Xiaoling 83.4 367 (% style="color:red" %)**Note:**
Kilight Cao 58.1 368
Xiaoye 83.1 369 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 370
371
Xiaoye 83.1 372 **Troubleshooting:**
Kilight Cao 59.1 373
Xiaoye 60.1 374
Xiaoye 83.1 375 **~ 1. URL does not jump properly**
Xiaoye 60.1 376
Kilight Cao 86.1 377 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 378
Kilight Cao 86.1 379 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 380
381
Xiaoling 117.2 382 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 383
Kilight Cao 58.1 384
Xiaoling 109.3 385 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 386
Xiaoye 83.1 387 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 388
389
Xiaoye 83.1 390 Login account:
Xiaoling 69.5 391
Xiaoye 83.1 392 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 393
Xiaoye 83.1 394 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 395
Kilight Cao 59.1 396
Xiaoye 83.1 397 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 398
399
Xiaoling 117.2 400 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 401
Xiaoling 69.6 402
Xiaoling 109.3 403 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 404
405
Kilight Cao 87.1 406 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 407
408
Xiaoye 83.1 409 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 410
411
412
Xiaoling 117.2 413 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 414
Xiaoye 116.1 415 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 416
Xiaoye 116.1 417
418 the users can refer to this link to install them.
419
420 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
421
422
Xiaoling 117.2 423 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 424
Kilight Cao 74.1 425
Xiaoling 109.3 426 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 427
Xiaoling 109.3 428
Kilight Cao 74.1 429 Port 1 of the UART on the LPS8v2 is GND
430
Kilight Cao 79.1 431 (% class="box infomessage" %)
432 (((
Xiaoling 107.2 433 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 434
Xiaoling 107.2 435 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 436
Xiaoling 107.2 437 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 438 )))
Kilight Cao 74.1 439
440
Kilight Cao 77.1 441 **LPS8v2 UART connection photo**
442
443 [[image:image-20220804163015-1.png||height="621" width="466"]]
444
445
446
Kilight Cao 78.1 447 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 448
Xiaoling 83.4 449
Kilight Cao 77.1 450 [[image:image-20220804164928-3.png||height="320" width="332"]]
451
Xiaoling 83.4 452
Kilight Cao 77.1 453 [[image:image-20220804164747-2.png||height="622" width="594"]]
454
Xiaoling 83.4 455
Xiaoling 117.2 456 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 457
Xiaoling 83.4 458
Xiaoye 102.1 459 == **Step 1: Configure Frequency Band** ==
460
461
462 //Each country has a requirement for frequency region. Choose the right one for your area.//
463
464 [[image:image-20220905164308-1.png]]
465
466
Xiaoling 107.2 467
Xiaoling 103.5 468 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 469
470
471 **Select one of the servers to configure.**
472
473 **For example:**
474
475 [[image:image-20220905164847-2.png]]
476
477
Xiaoling 107.2 478
Xiaoling 103.5 479 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 480
481
482 **Access the gateway CLI via SSH.**
483
484 [[image:image-20220905165222-3.png]]
485
486
487 **Download gateway-rs.**
488
489 [[image:image-20220905165715-5.png]]
490
491 (% class="box infomessage" %)
492 (((
Xiaoling 103.7 493 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 494 )))
495
496
497 **Install gateway-rs.**
498
499 [[image:image-20220905165917-7.png]]
500
501 (% class="box infomessage" %)
502 (((
Xiaoling 103.7 503 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 504 )))
505
506
507 **Modify configuration.**
508
509
510 [[image:image-20220905173847-12.png]]
511
512
513 (% class="box infomessage" %)
514 (((
Xiaoling 103.7 515 **region=<Enter regional parameters> \
Xiaoye 102.1 516 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 517 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 518 )))
519
520
521 **Restart the helium_gateway**
522
523 [[image:image-20220905170920-9.png]]
524
525
526 (% class="box infomessage" %)
527 (((
Xiaoling 103.7 528 **systemctl restart helium_gateway**
Xiaoye 102.1 529 )))
530
531
Xiaoling 103.7 532 **Check the helium_gateway Log：**
Xiaoye 102.1 533
534 [[image:image-20220905173952-13.png]]
535
536
537 (% class="box infomessage" %)
538 (((
Xiaoling 103.7 539 **journalctl -u helium_gateway -f**
Xiaoye 102.1 540 )))
541
542
Xiaoling 103.8 543 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 544
545 where the helium gateway log is shown:
546
547 [[image:image-20220905174534-14.png]]
548
549
Xiaoling 103.8 550 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 551
552
Xiaoling 117.2 553 = 7. OTA System Update =
Xiaoling 107.2 554
Kilight Cao 23.1 555
Kilight Cao 117.1 556 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 557
Xiaoye 112.1 558
Xiaoling 117.2 559 = 8. Trouble Shooting =
Xiaoye 112.1 560
Kilight Cao 117.1 561 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
562
563
Xiaoye 113.1 564 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 565
Xiaoling 113.2 566
Xiaoye 112.1 567 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
568
569 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
570
571
572 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
573
574 **Click the update URL button to configure the URL with the current eth port address.**
575
576 [[image:image-20220920141936-2.png]]
577
578
Xiaoling 117.2 579 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 580
581
Kilight Cao 14.1 582 (((
583 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
584 )))
Xiaoye 8.1 585
Kilight Cao 14.1 586 (((
587 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 588
Edwin Chen 50.1 589
Xiaoling 117.2 590 = 10. Reference =
Xiaoling 69.6 591
Edwin Chen 50.1 592
Edwin Chen 52.1 593 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 594 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 595
Kilight Cao 15.1 596
Kilight Cao 14.1 597 )))
Xiaoye 8.1 598
Xiaoling 117.2 599 = 11. Order Info =
Xiaoye 8.1 600
Xiaoling 69.6 601
Edwin Chen 42.1 602 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 603
Kilight Cao 14.1 604 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 605
Xiaoling 69.6 606 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
607 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
608 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
609 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
610 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
611 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 612
Edwin Chen 42.1 613 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
614
Xiaoling 69.6 615 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
616 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
617 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
618 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 619
620 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
621
622
Xiaoling 117.2 623 = 12. Manufacturer Info =
Xiaoling 69.6 624
Xiaoye 8.1 625
626 **Shenzhen Dragino Technology Development co. LTD**
627
628 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
629
630 LongCheng Street, LongGang District ; Shenzhen 518116,China
631
632
Xiaoling 117.2 633 = 13. FCC Warning =
Xiaoling 69.6 634
Xiaoye 8.1 635
Xiaoling 69.12 636 (((
Xiaoye 8.1 637 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 638 )))
Xiaoye 8.1 639
Xiaoling 69.12 640 (((
Xiaoye 8.1 641 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 642 )))
Xiaoye 8.1 643
Xiaoling 69.12 644 (((
Xiaoye 8.1 645 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 646 )))
Xiaoye 8.1 647
Xiaoling 69.12 648 (((
Xiaoye 8.1 649 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 650 )))
Xiaoye 8.1 651
Xiaoling 69.12 652 (((
Xiaoye 8.1 653 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 654 )))
Xiaoye 8.1 655
656
Xiaoling 69.12 657 (((
Xiaoye 8.1 658 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 659 )))
Xiaoye 8.1 660
661
Xiaoling 69.12 662 (((
Xiaoye 8.1 663 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 664
665
Xiaoye 8.1 666 )))
Xiaoling 69.12 667 )))