Skip to Content
Version 122.3 by Xiaoling on 2023/01/03 15:53
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
Xiaoling 122.2 67
Xiaoling 117.2 68 == 1.3 Features ==
69
70
Xiaoye 6.2 71 * Open Source Debian system
72 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 73 * Remote Management
Edwin Chen 49.1 74 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 75 * LoRaWAN Gateway
76 * 10 programmable parallel demodulation paths
Xiaoye 26.1 77 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 78 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 79 * Different kinds of LoRaWAN Connections such as
80 ** Semtech UDP Packet Forwarder
81 ** LoRaWAN Basic Station
82 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 83 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
84 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 85
Xiaoling 122.2 86
87
Xiaoling 117.2 88 == 1.4 Block Diagram ==
Xiaoling 69.3 89
Xiaoye 35.1 90
Xiaoling 69.3 91
Xiaoling 117.2 92 == 1.5 LED Indicators ==
93
94
Xiaoye 35.1 95 LPS8-V2 has totally four LEDs, They are:
96
97
Xiaoling 69.3 98 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 99
Xiaoling 107.3 100 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 101
Xiaoling 107.3 102 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 103
Xiaoye 84.1 104 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 105
Xiaoye 84.1 106 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 107
Xiaoling 69.4 108 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 109
Xiaoye 84.1 110 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 111
112
Xiaoling 117.2 113 == 1.6 Button Intruction ==
Xiaoling 107.2 114
Xiaoling 69.3 115
Xiaoye 84.1 116 LPS8-V2 has a black toggle button, which is:
117
118
119 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
120
121 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
122
123
Xiaoye 85.1 124 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 125
126 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
127
Xiaoling 107.2 128
Xiaoling 117.2 129 = 2. Quick Start =
Xiaoling 107.2 130
Xiaoye 8.1 131
Xiaoye 26.1 132 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 133
Xiaoye 26.1 134 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 135
136
Xiaoling 117.2 137 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 138
Xiaoling 117.2 139 == 2.1.1 connect the network ==
Xiaoye 8.1 140
141
Xiaoling 69.4 142 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 143
Xiaoling 69.4 144
Xiaoling 69.10 145 (((
Xiaoling 122.3 146 Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 147 )))
Xiaoye 26.1 148
Xiaoling 69.10 149 (((
Xiaoye 35.1 150 You can also use this IP to connect.
Xiaoling 69.10 151 )))
Xiaoye 35.1 152
153 [[image:image-20220622100129-1.png||height="332" width="1263"]]
154
155
156
Xiaoling 69.4 157 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 158
Xiaoling 69.4 159
Xiaoye 35.1 160 [[image:image-20220622100542-2.png||height="369" width="1256"]]
161
162
Xiaoling 69.4 163 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 164
165
166 [[image:image-20220622102702-6.png]]
167
168
Xiaoling 69.4 169
Xiaoye 35.1 170 **Wi-Fi configuration successful**
171
172
173 [[image:image-20220622102847-7.png]]
174
Xiaoling 69.4 175
Xiaoling 107.2 176 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 177
178
Xiaoling 117.2 179 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 180
Xiaoling 117.2 181 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 182
183
Xiaoling 69.12 184 (((
Xiaoye 41.1 185 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 186
187
Xiaoling 69.12 188 )))
Xiaoye 26.1 189
Xiaoling 107.2 190 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 191
192
Xiaoling 117.2 193 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 194
Xiaoye 41.1 195
196 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
197
Xiaoling 83.4 198
Xiaoling 107.2 199 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 200
201
Xiaoling 69.4 202 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 203
Xiaoling 69.4 204
Xiaoye 41.1 205 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
206
207 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
208
209 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
210
211 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
212
213
214 [[image:image-20220622103956-12.png]]
215
216
Xiaoling 117.2 217 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 218
219
220 **Login to The Things Network**
221
222 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
223
Xiaoling 69.4 224
Xiaoye 41.1 225 **Add the gateway**
226
227 [[image:image-20220622104252-13.png||height="511" width="953"]]
228
229
230 **Get it online**
231
232
Xiaoling 117.2 233 = 3. Web Configure Pages =
Xiaoling 69.4 234
Xiaoling 117.2 235 == 3.1 Home ==
Xiaoye 8.1 236
237
Kilight Cao 23.1 238 //Shows the system running status~://
Kilight Cao 15.1 239
Xiaoling 107.2 240 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 241
Xiaoling 83.4 242
Xiaoling 117.2 243 == 3.2 LoRa Settings ==
Xiaoling 107.2 244
Xiaoling 117.2 245 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 246
247
Kilight Cao 23.1 248 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 249
Kilight Cao 23.1 250 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 251
Xiaoye 83.1 252 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 253 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 254
Kilight Cao 23.1 255 (% class="wikigeneratedid" %)
Xiaoling 69.4 256 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 257
Xiaoling 83.4 258
Kilight Cao 23.1 259 (% class="wikigeneratedid" %)
260 [[image:image-20220616110739-1.png||height="372" width="682"]]
261
262
Xiaoling 69.4 263 (((
Xiaoling 103.3 264 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 265 )))
Kilight Cao 23.1 266
267
Xiaoling 117.2 268 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 269
Xiaoling 117.2 270 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 271
272
273 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
274
Xiaoling 83.4 275
Kilight Cao 23.1 276 [[image:image-20220616111932-2.png||height="516" width="672"]]
277
278
Xiaoling 117.2 279 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 280
Kilight Cao 23.1 281
282 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
283
Xiaoling 83.4 284
Kilight Cao 23.1 285 [[image:image-20220616113246-3.png||height="396" width="672"]]
286
287
Xiaoling 69.12 288 (((
Xiaoling 103.4 289 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 290 )))
Kilight Cao 23.1 291
292
Xiaoling 117.2 293 == 3.4 Network Settings ==
Xiaoling 69.5 294
Xiaoling 117.2 295 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 296
297
298 [[image:image-20220616114756-4.png||height="251" width="669"]]
299
300
Xiaoling 117.2 301 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 302
Kilight Cao 23.1 303
Xiaoye 83.1 304 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 305
306
Xiaoling 117.2 307 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 308
Kilight Cao 23.1 309
310 [[image:image-20220616115351-6.png||height="244" width="661"]]
311
312
Xiaoling 117.2 313 == 3.5 System ==
Xiaoling 69.5 314
Kilight Cao 122.1 315 === 3.5.1 System ~-~-> System Overview ===
Kilight Cao 23.1 316
317
318 Shows the system info:
319
Xiaoling 109.2 320 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 321
Xiaoling 69.5 322
Xiaoling 117.2 323 === 3.5.2 System ~-~-> Backup/Restore ===
Xiaoling 107.2 324
Kilight Cao 23.1 325
Xiaoling 109.2 326 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 327
328
Kilight Cao 121.1 329 === 3.5.3 System ~-~-> Remoteit ===
330
331
332 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
333
334
335 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
336
337 [[image:image-20221230092303-2.png]]
338
339
Xiaoling 117.2 340 = 4. Build-in Server =
Kilight Cao 23.1 341
Xiaoye 53.1 342
Xiaoye 83.1 343 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 344
Xiaoling 83.4 345
Xiaoling 107.2 346 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 347
348
Xiaoling 83.4 349 (% style="color:red" %)**Note:**
Kilight Cao 58.1 350
Xiaoye 83.1 351 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 352
353
Xiaoye 83.1 354 **Troubleshooting:**
Kilight Cao 59.1 355
Xiaoye 60.1 356
Xiaoye 83.1 357 **~ 1. URL does not jump properly**
Xiaoye 60.1 358
Kilight Cao 86.1 359 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 360
Kilight Cao 86.1 361 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 362
363
Xiaoling 117.2 364 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 365
Kilight Cao 58.1 366
Xiaoling 109.3 367 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 368
Xiaoye 83.1 369 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 370
371
Xiaoye 83.1 372 Login account:
Xiaoling 69.5 373
Xiaoye 83.1 374 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 375
Xiaoye 83.1 376 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 377
Kilight Cao 59.1 378
Xiaoye 83.1 379 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 380
381
Xiaoling 117.2 382 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 383
Xiaoling 69.6 384
Xiaoling 109.3 385 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 386
387
Kilight Cao 87.1 388 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 389
390
Xiaoye 83.1 391 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 392
393
394
Xiaoling 117.2 395 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 396
Xiaoye 116.1 397 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 398
Xiaoye 116.1 399
400 the users can refer to this link to install them.
401
402 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
403
404
Xiaoling 117.2 405 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 406
Kilight Cao 74.1 407
Xiaoling 109.3 408 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 409
Xiaoling 109.3 410
Kilight Cao 74.1 411 Port 1 of the UART on the LPS8v2 is GND
412
Kilight Cao 79.1 413 (% class="box infomessage" %)
414 (((
Xiaoling 107.2 415 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 416
Xiaoling 107.2 417 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 418
Xiaoling 107.2 419 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 420 )))
Kilight Cao 74.1 421
422
Kilight Cao 77.1 423 **LPS8v2 UART connection photo**
424
425 [[image:image-20220804163015-1.png||height="621" width="466"]]
426
427
428
Kilight Cao 78.1 429 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 430
Xiaoling 83.4 431
Kilight Cao 77.1 432 [[image:image-20220804164928-3.png||height="320" width="332"]]
433
Xiaoling 83.4 434
Kilight Cao 77.1 435 [[image:image-20220804164747-2.png||height="622" width="594"]]
436
Xiaoling 83.4 437
Xiaoling 117.2 438 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 439
Xiaoling 83.4 440
Xiaoye 102.1 441 == **Step 1: Configure Frequency Band** ==
442
443
444 //Each country has a requirement for frequency region. Choose the right one for your area.//
445
446 [[image:image-20220905164308-1.png]]
447
448
Xiaoling 107.2 449
Xiaoling 103.5 450 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 451
452
453 **Select one of the servers to configure.**
454
455 **For example:**
456
457 [[image:image-20220905164847-2.png]]
458
459
Xiaoling 107.2 460
Xiaoling 103.5 461 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 462
463
464 **Access the gateway CLI via SSH.**
465
466 [[image:image-20220905165222-3.png]]
467
468
469 **Download gateway-rs.**
470
471 [[image:image-20220905165715-5.png]]
472
473 (% class="box infomessage" %)
474 (((
Xiaoling 103.7 475 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 476 )))
477
478
479 **Install gateway-rs.**
480
481 [[image:image-20220905165917-7.png]]
482
483 (% class="box infomessage" %)
484 (((
Xiaoling 103.7 485 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 486 )))
487
488
489 **Modify configuration.**
490
491
492 [[image:image-20220905173847-12.png]]
493
494
495 (% class="box infomessage" %)
496 (((
Xiaoling 103.7 497 **region=<Enter regional parameters> \
Xiaoye 102.1 498 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 499 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 500 )))
501
502
503 **Restart the helium_gateway**
504
505 [[image:image-20220905170920-9.png]]
506
507
508 (% class="box infomessage" %)
509 (((
Xiaoling 103.7 510 **systemctl restart helium_gateway**
Xiaoye 102.1 511 )))
512
513
Xiaoling 103.7 514 **Check the helium_gateway Log：**
Xiaoye 102.1 515
516 [[image:image-20220905173952-13.png]]
517
518
519 (% class="box infomessage" %)
520 (((
Xiaoling 103.7 521 **journalctl -u helium_gateway -f**
Xiaoye 102.1 522 )))
523
524
Xiaoling 103.8 525 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 526
527 where the helium gateway log is shown:
528
529 [[image:image-20220905174534-14.png]]
530
531
Xiaoling 103.8 532 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 533
534
Xiaoling 117.2 535 = 7. OTA System Update =
Xiaoling 107.2 536
Kilight Cao 23.1 537
Kilight Cao 117.1 538 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 539
Xiaoye 112.1 540
Xiaoling 117.2 541 = 8. Trouble Shooting =
Xiaoye 112.1 542
Kilight Cao 117.1 543 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
544
545
Xiaoye 113.1 546 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 547
Xiaoling 113.2 548
Xiaoye 112.1 549 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
550
551 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
552
553
554 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
555
556 **Click the update URL button to configure the URL with the current eth port address.**
557
558 [[image:image-20220920141936-2.png]]
559
560
Xiaoling 117.2 561 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 562
563
Kilight Cao 14.1 564 (((
565 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
566 )))
Xiaoye 8.1 567
Kilight Cao 14.1 568 (((
569 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 570
Edwin Chen 50.1 571
Xiaoling 117.2 572 = 10. Reference =
Xiaoling 69.6 573
Edwin Chen 50.1 574
Edwin Chen 52.1 575 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 576 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 577
Xiaoling 122.2 578
Kilight Cao 15.1 579
Kilight Cao 14.1 580 )))
Xiaoye 8.1 581
Xiaoling 117.2 582 = 11. Order Info =
Xiaoye 8.1 583
Xiaoling 69.6 584
Edwin Chen 42.1 585 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 586
Kilight Cao 14.1 587 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 588
Xiaoling 69.6 589 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
590 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
591 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
592 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
593 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
594 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 595
Edwin Chen 42.1 596 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
597
Xiaoling 69.6 598 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
599 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
600 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
601 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 602
603 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
604
605
Xiaoling 117.2 606 = 12. Manufacturer Info =
Xiaoling 69.6 607
Xiaoye 8.1 608
609 **Shenzhen Dragino Technology Development co. LTD**
610
611 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
612
613 LongCheng Street, LongGang District ; Shenzhen 518116,China
614
615
Xiaoling 117.2 616 = 13. FCC Warning =
Xiaoling 69.6 617
Xiaoye 8.1 618
Xiaoling 69.12 619 (((
Xiaoye 8.1 620 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 621 )))
Xiaoye 8.1 622
Xiaoling 69.12 623 (((
Xiaoye 8.1 624 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 625 )))
Xiaoye 8.1 626
Xiaoling 69.12 627 (((
Xiaoye 8.1 628 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 629 )))
Xiaoye 8.1 630
Xiaoling 69.12 631 (((
Xiaoye 8.1 632 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 633 )))
Xiaoye 8.1 634
Xiaoling 69.12 635 (((
Xiaoye 8.1 636 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 637 )))
Xiaoye 8.1 638
639
Xiaoling 69.12 640 (((
Xiaoye 8.1 641 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 642 )))
Xiaoye 8.1 643
644
Xiaoling 69.12 645 (((
Xiaoye 8.1 646 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 647
648
Xiaoye 8.1 649 )))
Xiaoling 69.12 650 )))