Skip to Content
Version 121.1 by Kilight Cao on 2022/12/30 09:28
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
67
Xiaoling 117.2 68 == 1.3 Features ==
69
70
Xiaoye 6.2 71 * Open Source Debian system
72 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 73 * Remote Management
Edwin Chen 49.1 74 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 75 * LoRaWAN Gateway
76 * 10 programmable parallel demodulation paths
Xiaoye 26.1 77 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 78 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 79 * Different kinds of LoRaWAN Connections such as
80 ** Semtech UDP Packet Forwarder
81 ** LoRaWAN Basic Station
82 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 83 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
84 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 85
86
Xiaoling 117.2 87 == 1.4 Block Diagram ==
Xiaoling 69.3 88
Xiaoye 35.1 89
Xiaoling 69.3 90
Xiaoling 117.2 91 == 1.5 LED Indicators ==
92
93
Xiaoye 35.1 94 LPS8-V2 has totally four LEDs, They are:
95
96
Xiaoling 69.3 97 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 98
Xiaoling 107.3 99 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 100
Xiaoling 107.3 101 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 102
Xiaoye 84.1 103 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 104
Xiaoye 84.1 105 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 106
Xiaoling 69.4 107 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 108
Xiaoye 84.1 109 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 110
111
Xiaoling 117.2 112 == 1.6 Button Intruction ==
Xiaoling 107.2 113
Xiaoling 69.3 114
Xiaoye 84.1 115 LPS8-V2 has a black toggle button, which is:
116
117
118 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
119
120 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
121
122
Xiaoye 85.1 123 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 124
125 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
126
Xiaoling 107.2 127
Xiaoling 117.2 128 = 2. Quick Start =
Xiaoling 107.2 129
Xiaoye 8.1 130
Xiaoye 26.1 131 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 132
Xiaoye 26.1 133 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 134
135
Xiaoling 117.2 136 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 137
Xiaoling 117.2 138 == 2.1.1 connect the network ==
Xiaoye 8.1 139
140
Xiaoling 69.4 141 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 142
Xiaoling 69.4 143
Xiaoling 69.10 144 (((
Xiaoye 35.1 145 Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 146 )))
Xiaoye 26.1 147
Xiaoling 69.10 148 (((
Xiaoye 35.1 149 You can also use this IP to connect.
Xiaoling 69.10 150 )))
Xiaoye 35.1 151
152 [[image:image-20220622100129-1.png||height="332" width="1263"]]
153
154
155
Xiaoling 69.4 156 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 157
Xiaoling 69.4 158
Xiaoye 35.1 159 [[image:image-20220622100542-2.png||height="369" width="1256"]]
160
161
Xiaoling 69.4 162 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 163
164
165 [[image:image-20220622102702-6.png]]
166
167
Xiaoling 69.4 168
Xiaoye 35.1 169 **Wi-Fi configuration successful**
170
171
172 [[image:image-20220622102847-7.png]]
173
Xiaoling 69.4 174
Xiaoling 107.2 175 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 176
177
Xiaoling 117.2 178 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 179
Xiaoling 117.2 180 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 181
182
Xiaoling 69.12 183 (((
Xiaoye 41.1 184 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 185
186
Xiaoling 69.12 187 )))
Xiaoye 26.1 188
Xiaoling 107.2 189 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 190
191
Xiaoling 117.2 192 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 193
Xiaoye 41.1 194
195 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
196
Xiaoling 83.4 197
Xiaoling 107.2 198 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 199
200
Xiaoling 69.4 201 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 202
Xiaoling 69.4 203
Xiaoye 41.1 204 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
205
206 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
207
208 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
209
210 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
211
212
213 [[image:image-20220622103956-12.png]]
214
215
Xiaoling 117.2 216 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 217
218
219 **Login to The Things Network**
220
221 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
222
Xiaoling 69.4 223
Xiaoye 41.1 224 **Add the gateway**
225
226 [[image:image-20220622104252-13.png||height="511" width="953"]]
227
228
229 **Get it online**
230
231
Xiaoling 117.2 232 = 3. Web Configure Pages =
Xiaoling 69.4 233
Xiaoling 117.2 234 == 3.1 Home ==
Xiaoye 8.1 235
236
Kilight Cao 23.1 237 //Shows the system running status~://
Kilight Cao 15.1 238
Xiaoling 107.2 239 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 240
Xiaoling 83.4 241
Xiaoling 117.2 242 == 3.2 LoRa Settings ==
Xiaoling 107.2 243
Xiaoling 117.2 244 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 245
246
Kilight Cao 23.1 247 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 248
Kilight Cao 23.1 249 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 250
Xiaoye 83.1 251 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 252 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 253
Kilight Cao 23.1 254 (% class="wikigeneratedid" %)
Xiaoling 69.4 255 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 256
Xiaoling 83.4 257
Kilight Cao 23.1 258 (% class="wikigeneratedid" %)
259 [[image:image-20220616110739-1.png||height="372" width="682"]]
260
261
Xiaoling 69.4 262 (((
Xiaoling 103.3 263 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 264 )))
Kilight Cao 23.1 265
266
Xiaoling 117.2 267 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 268
Xiaoling 117.2 269 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 270
271
272 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
273
Xiaoling 83.4 274
Kilight Cao 23.1 275 [[image:image-20220616111932-2.png||height="516" width="672"]]
276
277
Xiaoling 117.2 278 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 279
Kilight Cao 23.1 280
281 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
282
Xiaoling 83.4 283
Kilight Cao 23.1 284 [[image:image-20220616113246-3.png||height="396" width="672"]]
285
286
Xiaoling 69.12 287 (((
Xiaoling 103.4 288 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 289 )))
Kilight Cao 23.1 290
291
Xiaoling 117.2 292 == 3.4 Network Settings ==
Xiaoling 69.5 293
Xiaoling 117.2 294 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 295
296
297 [[image:image-20220616114756-4.png||height="251" width="669"]]
298
299
Xiaoling 117.2 300 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 301
Kilight Cao 23.1 302
Xiaoye 83.1 303 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 304
305
Xiaoling 117.2 306 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 307
Kilight Cao 23.1 308
309 [[image:image-20220616115351-6.png||height="244" width="661"]]
310
311
Xiaoling 117.2 312 == 3.5 System ==
Xiaoling 69.5 313
Xiaoling 117.2 314 === 3.5.1  System ~-~-> System Overview ===
Kilight Cao 23.1 315
316
317 Shows the system info:
318
Xiaoling 109.2 319 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 320
Xiaoling 69.5 321
Xiaoling 117.2 322 === 3.5.2 System ~-~-> Backup/Restore ===
Xiaoling 107.2 323
Kilight Cao 23.1 324
Xiaoling 109.2 325 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 326
327
Kilight Cao 121.1 328 === 3.5.3 System ~-~-> Remoteit ===
329
330
331 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
332
333
334 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
335
336 [[image:image-20221230092303-2.png]]
337
338
Xiaoling 117.2 339 = 4. Build-in Server =
Kilight Cao 23.1 340
Xiaoye 53.1 341
Xiaoye 83.1 342 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 343
Xiaoling 83.4 344
Xiaoling 107.2 345 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 346
347
Xiaoling 83.4 348 (% style="color:red" %)**Note:**
Kilight Cao 58.1 349
Xiaoye 83.1 350 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 351
352
Xiaoye 83.1 353 **Troubleshooting:**
Kilight Cao 59.1 354
Xiaoye 60.1 355
Xiaoye 83.1 356 **~ 1. URL does not jump properly**
Xiaoye 60.1 357
Kilight Cao 86.1 358 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 359
Kilight Cao 86.1 360 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 361
362
Xiaoling 117.2 363 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 364
Kilight Cao 58.1 365
Xiaoling 109.3 366 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 367
Xiaoye 83.1 368 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 369
370
Xiaoye 83.1 371 Login account:
Xiaoling 69.5 372
Xiaoye 83.1 373 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 374
Xiaoye 83.1 375 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 376
Kilight Cao 59.1 377
Xiaoye 83.1 378 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 379
380
Xiaoling 117.2 381 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 382
Xiaoling 69.6 383
Xiaoling 109.3 384 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 385
386
Kilight Cao 87.1 387 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 388
389
Xiaoye 83.1 390 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 391
392
393
Xiaoling 117.2 394 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 395
Xiaoye 116.1 396 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 397
Xiaoye 116.1 398
399 the users can refer to this link to install them.
400
401 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
402
403
Xiaoling 117.2 404 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 405
Kilight Cao 74.1 406
Xiaoling 109.3 407 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 408
Xiaoling 109.3 409
Kilight Cao 74.1 410 Port 1 of the UART on the LPS8v2 is GND
411
Kilight Cao 79.1 412 (% class="box infomessage" %)
413 (((
Xiaoling 107.2 414 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 415
Xiaoling 107.2 416 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 417
Xiaoling 107.2 418 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 419 )))
Kilight Cao 74.1 420
421
Kilight Cao 77.1 422 **LPS8v2 UART connection photo**
423
424 [[image:image-20220804163015-1.png||height="621" width="466"]]
425
426
427
Kilight Cao 78.1 428 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 429
Xiaoling 83.4 430
Kilight Cao 77.1 431 [[image:image-20220804164928-3.png||height="320" width="332"]]
432
Xiaoling 83.4 433
Kilight Cao 77.1 434 [[image:image-20220804164747-2.png||height="622" width="594"]]
435
Xiaoling 83.4 436
Xiaoling 117.2 437 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 438
Xiaoling 83.4 439
Xiaoye 102.1 440 == **Step 1: Configure Frequency Band** ==
441
442
443 //Each country has a requirement for frequency region. Choose the right one for your area.//
444
445 [[image:image-20220905164308-1.png]]
446
447
Xiaoling 107.2 448
Xiaoling 103.5 449 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 450
451
452 **Select one of the servers to configure.**
453
454 **For example:**
455
456 [[image:image-20220905164847-2.png]]
457
458
Xiaoling 107.2 459
Xiaoling 103.5 460 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 461
462
463 **Access the gateway CLI via SSH.**
464
465 [[image:image-20220905165222-3.png]]
466
467
468 **Download gateway-rs.**
469
470 [[image:image-20220905165715-5.png]]
471
472 (% class="box infomessage" %)
473 (((
Xiaoling 103.7 474 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 475 )))
476
477
478 **Install gateway-rs.**
479
480 [[image:image-20220905165917-7.png]]
481
482 (% class="box infomessage" %)
483 (((
Xiaoling 103.7 484 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 485 )))
486
487
488 **Modify configuration.**
489
490
491 [[image:image-20220905173847-12.png]]
492
493
494 (% class="box infomessage" %)
495 (((
Xiaoling 103.7 496 **region=<Enter regional parameters> \
Xiaoye 102.1 497 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 498 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 499 )))
500
501
502 **Restart the helium_gateway**
503
504 [[image:image-20220905170920-9.png]]
505
506
507 (% class="box infomessage" %)
508 (((
Xiaoling 103.7 509 **systemctl restart helium_gateway**
Xiaoye 102.1 510 )))
511
512
Xiaoling 103.7 513 **Check the helium_gateway Log：**
Xiaoye 102.1 514
515 [[image:image-20220905173952-13.png]]
516
517
518 (% class="box infomessage" %)
519 (((
Xiaoling 103.7 520 **journalctl -u helium_gateway -f**
Xiaoye 102.1 521 )))
522
523
Xiaoling 103.8 524 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 525
526 where the helium gateway log is shown:
527
528 [[image:image-20220905174534-14.png]]
529
530
Xiaoling 103.8 531 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 532
533
Xiaoling 117.2 534 = 7. OTA System Update =
Xiaoling 107.2 535
Kilight Cao 23.1 536
Kilight Cao 117.1 537 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 538
Xiaoye 112.1 539
Xiaoling 117.2 540 = 8. Trouble Shooting =
Xiaoye 112.1 541
Kilight Cao 117.1 542 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
543
544
Xiaoye 113.1 545 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 546
Xiaoling 113.2 547
Xiaoye 112.1 548 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
549
550 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
551
552
553 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
554
555 **Click the update URL button to configure the URL with the current eth port address.**
556
557 [[image:image-20220920141936-2.png]]
558
559
Xiaoling 117.2 560 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 561
562
Kilight Cao 14.1 563 (((
564 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
565 )))
Xiaoye 8.1 566
Kilight Cao 14.1 567 (((
568 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 569
Edwin Chen 50.1 570
Xiaoling 117.2 571 = 10. Reference =
Xiaoling 69.6 572
Edwin Chen 50.1 573
Edwin Chen 52.1 574 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 575 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 576
Kilight Cao 15.1 577
Kilight Cao 14.1 578 )))
Xiaoye 8.1 579
Xiaoling 117.2 580 = 11. Order Info =
Xiaoye 8.1 581
Xiaoling 69.6 582
Edwin Chen 42.1 583 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 584
Kilight Cao 14.1 585 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 586
Xiaoling 69.6 587 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
588 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
589 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
590 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
591 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
592 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 593
Edwin Chen 42.1 594 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
595
Xiaoling 69.6 596 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
597 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
598 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
599 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 600
601 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
602
603
Xiaoling 117.2 604 = 12. Manufacturer Info =
Xiaoling 69.6 605
Xiaoye 8.1 606
607 **Shenzhen Dragino Technology Development co. LTD**
608
609 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
610
611 LongCheng Street, LongGang District ; Shenzhen 518116,China
612
613
Xiaoling 117.2 614 = 13. FCC Warning =
Xiaoling 69.6 615
Xiaoye 8.1 616
Xiaoling 69.12 617 (((
Xiaoye 8.1 618 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 619 )))
Xiaoye 8.1 620
Xiaoling 69.12 621 (((
Xiaoye 8.1 622 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 623 )))
Xiaoye 8.1 624
Xiaoling 69.12 625 (((
Xiaoye 8.1 626 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 627 )))
Xiaoye 8.1 628
Xiaoling 69.12 629 (((
Xiaoye 8.1 630 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 631 )))
Xiaoye 8.1 632
Xiaoling 69.12 633 (((
Xiaoye 8.1 634 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 635 )))
Xiaoye 8.1 636
637
Xiaoling 69.12 638 (((
Xiaoye 8.1 639 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 640 )))
Xiaoye 8.1 641
642
Xiaoling 69.12 643 (((
Xiaoye 8.1 644 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 645
646
Xiaoye 8.1 647 )))
Xiaoling 69.12 648 )))