Skip to Content
Version 119.1 by Kilight Cao on 2022/12/30 09:23
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Xiaoling 117.2 19 = 1. Introduction =
Xiaoye 5.1 20
Xiaoling 117.2 21 == 1.1 What is LPS8v2 ==
Xiaoling 83.2 22
Xiaoye 5.1 23
24 (((
Xiaoling 69.7 25 (((
Edwin Chen 44.1 26 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 27 )))
Xiaoye 6.2 28
Xiaoling 69.7 29 (((
Edwin Chen 44.1 30 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 31 )))
Xiaoye 6.2 32
Xiaoling 69.7 33 (((
Edwin Chen 44.1 34 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 35 )))
Xiaoye 6.2 36
Xiaoling 69.7 37 (((
Edwin Chen 43.1 38 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 39 )))
Xiaoye 6.2 40
Xiaoling 69.7 41 (((
Edwin Chen 44.1 42 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 43 )))
Edwin Chen 43.1 44
45
Xiaoling 117.2 46 == 1.2 Specifications ==
Xiaoling 69.2 47
Xiaoye 6.2 48
Xiaoling 69.2 49 (% style="color:#037691" %)**Hardware System:**
50
Edwin Chen 46.1 51 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 52 * RAM: 512MB
53 * eMMC: 4GB
54
Xiaoling 69.2 55 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 56
57 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 58 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 59 * WiFi 802.11 b/g/n
Xiaoye 6.2 60
Xiaoling 69.2 61 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 62
63 * Work Temperature: -20 ~~ 65°C
64 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 65 * Power Input: 5V, 2A, DC
Xiaoye 6.2 66
67
Xiaoling 69.2 68
Xiaoling 117.2 69 == 1.3 Features ==
70
71
Xiaoye 6.2 72 * Open Source Debian system
73 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 74 * Remote Management
Edwin Chen 49.1 75 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 76 * LoRaWAN Gateway
77 * 10 programmable parallel demodulation paths
Xiaoye 26.1 78 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 79 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 80 * Different kinds of LoRaWAN Connections such as
81 ** Semtech UDP Packet Forwarder
82 ** LoRaWAN Basic Station
83 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 84 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 86
87
88
Xiaoling 117.2 89 == 1.4 Block Diagram ==
Xiaoling 69.3 90
Xiaoye 35.1 91
Xiaoling 69.3 92
Xiaoling 117.2 93 == 1.5 LED Indicators ==
94
95
Xiaoye 35.1 96 LPS8-V2 has totally four LEDs, They are:
97
98
Xiaoling 69.3 99 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 100
Xiaoling 107.3 101 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 102
Xiaoling 107.3 103 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 104
Xiaoye 84.1 105 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 106
Xiaoye 84.1 107 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 108
Xiaoling 69.4 109 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 110
Xiaoye 84.1 111 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 112
113
Xiaoling 117.2 114 == 1.6 Button Intruction ==
Xiaoling 107.2 115
Xiaoling 69.3 116
Xiaoye 84.1 117 LPS8-V2 has a black toggle button, which is:
118
119
120 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
121
122 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
123
124
Xiaoye 85.1 125 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 126
127 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
128
Xiaoling 107.2 129
Xiaoling 117.2 130 = 2. Quick Start =
Xiaoling 107.2 131
Xiaoye 8.1 132
Xiaoye 26.1 133 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 134
Xiaoye 26.1 135 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 136
137
Xiaoling 117.2 138 == 2.1 Connects to the network and accesses the gateway Web UI ==
Xiaoling 69.4 139
Xiaoling 117.2 140 == 2.1.1 connect the network ==
Xiaoye 8.1 141
142
Xiaoling 69.4 143 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 144
Xiaoling 69.4 145
Xiaoling 69.10 146 (((
Xiaoye 35.1 147 Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 148 )))
Xiaoye 26.1 149
Xiaoling 69.10 150 (((
Xiaoye 35.1 151 You can also use this IP to connect.
Xiaoling 69.10 152 )))
Xiaoye 35.1 153
154 [[image:image-20220622100129-1.png||height="332" width="1263"]]
155
156
157
Xiaoling 69.4 158 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 159
Xiaoling 69.4 160
Xiaoye 35.1 161 [[image:image-20220622100542-2.png||height="369" width="1256"]]
162
163
Xiaoling 69.4 164 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 165
166
167 [[image:image-20220622102702-6.png]]
168
169
Xiaoling 69.4 170
Xiaoye 35.1 171 **Wi-Fi configuration successful**
172
173
174 [[image:image-20220622102847-7.png]]
175
Xiaoling 69.4 176
Xiaoling 107.2 177 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 178
179
Xiaoling 117.2 180 == 2.2 The LPS8-V2 is registered and connected to The Things Network ==
Xiaoye 35.1 181
Xiaoling 117.2 182 === 2.2.1 Select your area frequency ===
Xiaoye 26.1 183
184
Xiaoling 69.12 185 (((
Xiaoye 41.1 186 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 187
188
Xiaoling 69.12 189 )))
Xiaoye 26.1 190
Xiaoling 107.2 191 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 192
193
Xiaoling 117.2 194 === 2.2.2 Get the only gateway EUI ===
Xiaoling 69.4 195
Xiaoye 41.1 196
197 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
198
Xiaoling 83.4 199
Xiaoling 107.2 200 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 201
202
Xiaoling 69.4 203 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 204
Xiaoling 69.4 205
Xiaoye 41.1 206 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
207
208 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
209
210 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
211
212 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
213
214
215 [[image:image-20220622103956-12.png]]
216
217
Xiaoling 117.2 218 == 2.2.3 Register the gateway to The Things Network ==
Xiaoye 41.1 219
220
221 **Login to The Things Network**
222
223 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
224
Xiaoling 69.4 225
Xiaoye 41.1 226 **Add the gateway**
227
228 [[image:image-20220622104252-13.png||height="511" width="953"]]
229
230
231 **Get it online**
232
233
Xiaoling 117.2 234 = 3. Web Configure Pages =
Xiaoling 69.4 235
Xiaoling 117.2 236 == 3.1 Home ==
Xiaoye 8.1 237
238
Kilight Cao 23.1 239 //Shows the system running status~://
Kilight Cao 15.1 240
Xiaoling 107.2 241 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 242
Xiaoling 83.4 243
Xiaoling 117.2 244 == 3.2 LoRa Settings ==
Xiaoling 107.2 245
Xiaoling 117.2 246 === 3.2.1 LoRa ~-~-> LoRa ===
Kilight Cao 15.1 247
248
Kilight Cao 23.1 249 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 250
Kilight Cao 23.1 251 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 252
Xiaoye 83.1 253 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 254 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 255
Kilight Cao 23.1 256 (% class="wikigeneratedid" %)
Xiaoling 69.4 257 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 258
Xiaoling 83.4 259
Kilight Cao 23.1 260 (% class="wikigeneratedid" %)
261 [[image:image-20220616110739-1.png||height="372" width="682"]]
262
263
Xiaoling 69.4 264 (((
Xiaoling 103.3 265 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 266 )))
Kilight Cao 23.1 267
268
Xiaoling 117.2 269 == 3.3 LoRaWAN Settings ==
Kilight Cao 23.1 270
Xiaoling 117.2 271 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
Kilight Cao 23.1 272
273
274 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
275
Xiaoling 83.4 276
Kilight Cao 23.1 277 [[image:image-20220616111932-2.png||height="516" width="672"]]
278
279
Xiaoling 117.2 280 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
Xiaoling 69.5 281
Kilight Cao 23.1 282
283 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
284
Xiaoling 83.4 285
Kilight Cao 23.1 286 [[image:image-20220616113246-3.png||height="396" width="672"]]
287
288
Xiaoling 69.12 289 (((
Xiaoling 103.4 290 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 291 )))
Kilight Cao 23.1 292
293
Xiaoling 117.2 294 == 3.4 Network Settings ==
Xiaoling 69.5 295
Xiaoling 117.2 296 === 3.4.1 Network ~-~-> WiFi ===
Kilight Cao 23.1 297
298
299 [[image:image-20220616114756-4.png||height="251" width="669"]]
300
301
Xiaoling 117.2 302 === 3.4.2 Network ~-~-> System Status ===
Xiaoling 69.5 303
Kilight Cao 23.1 304
Xiaoye 83.1 305 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 306
307
Xiaoling 117.2 308 === 3.4.3 Network ~-~-> Firewall ===
Xiaoling 69.5 309
Kilight Cao 23.1 310
311 [[image:image-20220616115351-6.png||height="244" width="661"]]
312
313
Xiaoling 117.2 314 == 3.5 System ==
Xiaoling 69.5 315
Xiaoling 117.2 316 === 3.5.1  System ~-~-> System Overview ===
Kilight Cao 23.1 317
318
319 Shows the system info:
320
Xiaoling 109.2 321 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 322
Xiaoling 69.5 323
Xiaoling 117.2 324 === 3.5.2 System ~-~-> Backup/Restore ===
Xiaoling 107.2 325
Kilight Cao 23.1 326
Xiaoling 109.2 327 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 328
329
Xiaoling 117.2 330 = 4. Build-in Server =
Kilight Cao 23.1 331
Xiaoye 53.1 332
Xiaoye 83.1 333 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 334
Xiaoling 83.4 335
Xiaoling 107.2 336 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 337
338
Xiaoling 83.4 339 (% style="color:red" %)**Note:**
Kilight Cao 58.1 340
Xiaoye 83.1 341 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 342
343
Xiaoye 83.1 344 **Troubleshooting:**
Kilight Cao 59.1 345
Xiaoye 60.1 346
Xiaoye 83.1 347 **~ 1. URL does not jump properly**
Xiaoye 60.1 348
Kilight Cao 86.1 349 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 350
Kilight Cao 86.1 351 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 352
353
Xiaoling 117.2 354 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
Xiaoling 83.4 355
Kilight Cao 58.1 356
Xiaoling 109.3 357 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 358
Xiaoye 83.1 359 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 360
361
Xiaoye 83.1 362 Login account:
Xiaoling 69.5 363
Xiaoye 83.1 364 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 365
Xiaoye 83.1 366 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 367
Kilight Cao 59.1 368
Xiaoye 83.1 369 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 370
371
Xiaoling 117.2 372 == 4.2 Application Server ~-~- Node-Red ==
Xiaoye 60.1 373
Xiaoling 69.6 374
Xiaoling 109.3 375 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 376
377
Kilight Cao 87.1 378 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 379
380
Xiaoye 83.1 381 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 382
383
384
Xiaoling 117.2 385 === **Using Node-Red, InfluxDB and Grafana** ===
Xiaoye 115.1 386
Xiaoye 116.1 387 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 388
Xiaoye 116.1 389
390 the users can refer to this link to install them.
391
392 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
393
394
Xiaoling 117.2 395 = 5. How users can access LPS8v2 using serial USB =
Xiaoling 69.6 396
Kilight Cao 74.1 397
Xiaoling 109.3 398 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 399
Xiaoling 109.3 400
Kilight Cao 74.1 401 Port 1 of the UART on the LPS8v2 is GND
402
Kilight Cao 79.1 403 (% class="box infomessage" %)
404 (((
Xiaoling 107.2 405 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 406
Xiaoling 107.2 407 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 408
Xiaoling 107.2 409 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 410 )))
Kilight Cao 74.1 411
412
Kilight Cao 77.1 413 **LPS8v2 UART connection photo**
414
415 [[image:image-20220804163015-1.png||height="621" width="466"]]
416
417
418
Kilight Cao 78.1 419 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 420
Xiaoling 83.4 421
Kilight Cao 77.1 422 [[image:image-20220804164928-3.png||height="320" width="332"]]
423
Xiaoling 83.4 424
Kilight Cao 77.1 425 [[image:image-20220804164747-2.png||height="622" width="594"]]
426
Xiaoling 83.4 427
Xiaoling 117.2 428 = 6. Use the helium gateway-rs as the Data-only Hotspot =
Xiaoling 107.2 429
Xiaoling 83.4 430
Xiaoye 102.1 431 == **Step 1: Configure Frequency Band** ==
432
433
434 //Each country has a requirement for frequency region. Choose the right one for your area.//
435
436 [[image:image-20220905164308-1.png]]
437
438
Xiaoling 107.2 439
Xiaoling 103.5 440 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 441
442
443 **Select one of the servers to configure.**
444
445 **For example:**
446
447 [[image:image-20220905164847-2.png]]
448
449
Xiaoling 107.2 450
Xiaoling 103.5 451 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 452
453
454 **Access the gateway CLI via SSH.**
455
456 [[image:image-20220905165222-3.png]]
457
458
459 **Download gateway-rs.**
460
461 [[image:image-20220905165715-5.png]]
462
463 (% class="box infomessage" %)
464 (((
Xiaoling 103.7 465 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 466 )))
467
468
469 **Install gateway-rs.**
470
471 [[image:image-20220905165917-7.png]]
472
473 (% class="box infomessage" %)
474 (((
Xiaoling 103.7 475 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 476 )))
477
478
479 **Modify configuration.**
480
481
482 [[image:image-20220905173847-12.png]]
483
484
485 (% class="box infomessage" %)
486 (((
Xiaoling 103.7 487 **region=<Enter regional parameters> \
Xiaoye 102.1 488 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 489 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 490 )))
491
492
493 **Restart the helium_gateway**
494
495 [[image:image-20220905170920-9.png]]
496
497
498 (% class="box infomessage" %)
499 (((
Xiaoling 103.7 500 **systemctl restart helium_gateway**
Xiaoye 102.1 501 )))
502
503
Xiaoling 103.7 504 **Check the helium_gateway Log：**
Xiaoye 102.1 505
506 [[image:image-20220905173952-13.png]]
507
508
509 (% class="box infomessage" %)
510 (((
Xiaoling 103.7 511 **journalctl -u helium_gateway -f**
Xiaoye 102.1 512 )))
513
514
Xiaoling 103.8 515 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 516
517 where the helium gateway log is shown:
518
519 [[image:image-20220905174534-14.png]]
520
521
Xiaoling 103.8 522 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 523
524
Xiaoling 117.2 525 = 7. OTA System Update =
Xiaoling 107.2 526
Kilight Cao 23.1 527
Kilight Cao 117.1 528 LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
Xiaoling 69.6 529
Xiaoye 112.1 530
Xiaoling 117.2 531 = 8. Trouble Shooting =
Xiaoye 112.1 532
Kilight Cao 117.1 533 == 8.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
534
535
Xiaoye 113.1 536 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 537
Xiaoling 113.2 538
Xiaoye 112.1 539 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
540
541 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
542
543
544 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
545
546 **Click the update URL button to configure the URL with the current eth port address.**
547
548 [[image:image-20220920141936-2.png]]
549
550
Xiaoling 117.2 551 = (% style="color:inherit; font-family:inherit; font-size:29px" %)9. Supports(%%) =
Xiaoye 112.1 552
553
Kilight Cao 14.1 554 (((
555 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
556 )))
Xiaoye 8.1 557
Kilight Cao 14.1 558 (((
559 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 560
Edwin Chen 50.1 561
Xiaoling 117.2 562 = 10. Reference =
Xiaoling 69.6 563
Edwin Chen 50.1 564
Edwin Chen 52.1 565 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 566 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 567
Xiaoling 117.2 568
Kilight Cao 15.1 569
Kilight Cao 14.1 570 )))
Xiaoye 8.1 571
Xiaoling 117.2 572 = 11. Order Info =
Xiaoye 8.1 573
Xiaoling 69.6 574
Edwin Chen 42.1 575 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 576
Kilight Cao 14.1 577 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 578
Xiaoling 69.6 579 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
580 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
581 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
582 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
583 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
584 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 585
Edwin Chen 42.1 586 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
587
Xiaoling 69.6 588 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
589 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
590 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
591 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 592
593 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
594
595
Xiaoling 117.2 596 = 12. Manufacturer Info =
Xiaoling 69.6 597
Xiaoye 8.1 598
599 **Shenzhen Dragino Technology Development co. LTD**
600
601 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
602
603 LongCheng Street, LongGang District ; Shenzhen 518116,China
604
605
Xiaoling 117.2 606 = 13. FCC Warning =
Xiaoling 69.6 607
Xiaoye 8.1 608
Xiaoling 69.12 609 (((
Xiaoye 8.1 610 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 611 )))
Xiaoye 8.1 612
Xiaoling 69.12 613 (((
Xiaoye 8.1 614 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 615 )))
Xiaoye 8.1 616
Xiaoling 69.12 617 (((
Xiaoye 8.1 618 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 619 )))
Xiaoye 8.1 620
Xiaoling 69.12 621 (((
Xiaoye 8.1 622 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 623 )))
Xiaoye 8.1 624
Xiaoling 69.12 625 (((
Xiaoye 8.1 626 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 627 )))
Xiaoye 8.1 628
629
Xiaoling 69.12 630 (((
Xiaoye 8.1 631 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 632 )))
Xiaoye 8.1 633
634
Xiaoling 69.12 635 (((
Xiaoye 8.1 636 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 637
638
Xiaoye 8.1 639 )))
Xiaoling 69.12 640 )))