Skip to Content
Version 116.1 by Xiaoye on 2022/11/21 11:30
Hide last authors
Xiaoling 69.2 1 (% style="text-align:center" %)
Edwin Chen 43.1 2 [[image:image-20220620202334-2.png||height="467" width="809"]]
Xiaoye 4.1 3
4
5 (((
Xiaoling 69.2 6
Xiaoye 4.1 7
8
9 )))
Xiaoye 5.1 10
11 **Table of Contents：**
12
13 {{toc/}}
14
Xiaoling 69.2 15
Xiaoling 83.2 16
17
18
Kilight Cao 11.1 19 = **1. Introduction** =
Xiaoye 5.1 20
Xiaoling 83.2 21
Kilight Cao 12.1 22 == **1.1 What is LPS8v2** ==
Xiaoye 5.1 23
Xiaoling 69.2 24
Xiaoye 5.1 25 (((
Xiaoling 69.7 26 (((
Edwin Chen 44.1 27 The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
Xiaoling 69.7 28 )))
Xiaoye 6.2 29
Xiaoling 69.7 30 (((
Edwin Chen 44.1 31 The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
Xiaoling 69.7 32 )))
Xiaoye 6.2 33
Xiaoling 69.7 34 (((
Edwin Chen 44.1 35 LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
Xiaoling 69.7 36 )))
Xiaoye 6.2 37
Xiaoling 69.7 38 (((
Edwin Chen 43.1 39 Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
Xiaoling 69.7 40 )))
Xiaoye 6.2 41
Xiaoling 69.7 42 (((
Edwin Chen 44.1 43 LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
Xiaoling 69.7 44 )))
Edwin Chen 43.1 45
46
Xiaoling 69.2 47
Kilight Cao 11.1 48 == **1.2 Specifications** ==
Xiaoye 6.2 49
50
Xiaoling 69.2 51 (% style="color:#037691" %)**Hardware System:**
52
Edwin Chen 46.1 53 * CPU: Quad-core Cortex-A7 1.2Ghz
Xiaoye 6.2 54 * RAM: 512MB
55 * eMMC: 4GB
56
Xiaoling 69.2 57 (% style="color:#037691" %)**Interface:**
Xiaoye 6.2 58
59 * 10M/100M RJ45 Ports x 1
Edwin Chen 45.1 60 * Multi-Channel LoRaWAN Wireless
Edwin Chen 43.1 61 * WiFi 802.11 b/g/n
Xiaoye 6.2 62
Xiaoling 69.2 63 (% style="color:#037691" %)**Operating Condition:**
Xiaoye 6.2 64
65 * Work Temperature: -20 ~~ 65°C
66 * Storage Temperature: -20 ~~ 65°C
Edwin Chen 45.1 67 * Power Input: 5V, 2A, DC
Xiaoye 6.2 68
Kilight Cao 11.1 69 == **1.3 Features** ==
Xiaoye 6.2 70
Xiaoling 69.2 71
Xiaoye 6.2 72 * Open Source Debian system
73 * Managed by Web GUI, SSH via WAN or WiFi
Edwin Chen 45.1 74 * Remote Management
Edwin Chen 49.1 75 * Auto-provisioning for batch deployment and management
Xiaoye 6.2 76 * LoRaWAN Gateway
77 * 10 programmable parallel demodulation paths
Xiaoye 26.1 78 * Pre-configured to support different LoRaWAN regional settings.
Kilight Cao 11.1 79 * Allow customizing LoRaWAN regional parameters.
Edwin Chen 45.1 80 * Different kinds of LoRaWAN Connections such as
81 ** Semtech UDP Packet Forwarder
82 ** LoRaWAN Basic Station
83 ** ChirpStack-Gateway-Bridge (MQTT)
Xiaoling 69.2 84 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
85 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
Xiaoye 6.2 86
Kilight Cao 11.1 87 == **1.4 Block Diagram** ==
Xiaoye 6.2 88
89
Xiaoling 69.3 90
Xiaoye 35.1 91 == **1.5 LED Indicators** ==
92
Xiaoling 69.3 93
Xiaoye 35.1 94 LPS8-V2 has totally four LEDs, They are:
95
96
Xiaoling 69.3 97 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
Xiaoye 35.1 98
Xiaoling 107.3 99 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
Xiaoye 35.1 100
Xiaoling 107.3 101 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
Xiaoye 35.1 102
Xiaoye 84.1 103 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
Xiaoye 35.1 104
Xiaoye 84.1 105 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
Xiaoye 35.1 106
Xiaoling 69.4 107 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
Xiaoye 35.1 108
Xiaoye 84.1 109 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
Xiaoye 35.1 110
111
Xiaoling 107.2 112
Xiaoye 85.1 113 == **1.6 Button Intruction** ==
Xiaoling 69.3 114
Xiaoye 84.1 115
116 LPS8-V2 has a black toggle button, which is:
117
118
119 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
120
121 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
122
123
Xiaoye 85.1 124 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
Xiaoye 84.1 125
126 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
127
Xiaoling 107.2 128
129
Xiaoye 26.1 130 = **2. Quick Start** =
Xiaoye 8.1 131
Xiaoling 69.4 132
Xiaoye 26.1 133 The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
Xiaoye 8.1 134
Xiaoye 26.1 135 In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
Xiaoye 8.1 136
137
Xiaoling 69.4 138
Xiaoye 35.1 139 == **2.1 Connects to the network and accesses the gateway Web UI** ==
Xiaoye 8.1 140
141
Xiaoye 35.1 142 == **2.1.1 connect the network.** ==
Xiaoye 8.1 143
144
Xiaoling 69.4 145 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
Xiaoye 26.1 146
Xiaoling 69.4 147
Xiaoling 69.10 148 (((
Xiaoye 35.1 149 Connect the LPS8-V2 Ethernet port to your router and LPS8 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
Xiaoling 69.10 150 )))
Xiaoye 26.1 151
Xiaoling 69.10 152 (((
Xiaoye 35.1 153 You can also use this IP to connect.
Xiaoling 69.10 154 )))
Xiaoye 35.1 155
156 [[image:image-20220622100129-1.png||height="332" width="1263"]]
157
158
159
Xiaoling 69.4 160 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
Xiaoye 35.1 161
Xiaoling 69.4 162
Xiaoye 35.1 163 [[image:image-20220622100542-2.png||height="369" width="1256"]]
164
165
Xiaoling 69.4 166 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
Xiaoye 35.1 167
168
169 [[image:image-20220622102702-6.png]]
170
171
Xiaoling 69.4 172
Xiaoye 35.1 173 **Wi-Fi configuration successful**
174
175
176 [[image:image-20220622102847-7.png]]
177
Xiaoling 69.4 178
Xiaoling 107.2 179 [[image:image-20220622102901-8.png||height="476" width="938"]]
Xiaoye 35.1 180
181
182
Xiaoye 26.1 183 == **2.2 The LPS8-V2 is registered and connected to The Things Network** ==
184
185
Xiaoye 41.1 186 === **2.2.1 Select your area frequency** ===
Xiaoye 26.1 187
Xiaoling 69.4 188
Xiaoling 69.12 189 (((
Xiaoye 41.1 190 First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
Xiaoling 83.3 191
192
Xiaoling 69.12 193 )))
Xiaoye 26.1 194
Xiaoling 107.2 195 [[image:image-20220622103332-9.png||height="485" width="938"]]
Xiaoye 26.1 196
197
Xiaoling 69.4 198
Xiaoye 41.1 199 === **2.2.2 Get the only gateway EUI** ===
200
Xiaoling 69.4 201
Xiaoye 41.1 202 Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
203
Xiaoling 83.4 204
Xiaoling 107.2 205 [[image:image-20220622103355-10.png||height="698" width="949"]]
Xiaoye 41.1 206
207
Xiaoling 69.4 208 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
Xiaoye 41.1 209
Xiaoling 69.4 210
Xiaoye 41.1 211 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
212
213 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
214
215 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
216
217 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
218
219
220 [[image:image-20220622103956-12.png]]
221
222
223
Xiaoling 83.4 224 == **2.2.3 Register the gateway to The Things Network** ==
Xiaoye 41.1 225
Xiaoling 69.4 226
Xiaoye 41.1 227 **Login to The Things Network**
228
229 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
230
Xiaoling 69.4 231
Xiaoye 41.1 232 **Add the gateway**
233
234 [[image:image-20220622104252-13.png||height="511" width="953"]]
235
236
237 **Get it online**
238
239
Xiaoling 69.4 240
Kilight Cao 15.1 241 = **3. Web Configure Pages** =
Xiaoye 8.1 242
243
Kilight Cao 15.1 244 == **3.1 Home** ==
Kilight Cao 11.1 245
Xiaoling 69.4 246
Kilight Cao 23.1 247 //Shows the system running status~://
Kilight Cao 15.1 248
Xiaoling 107.2 249 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
Xiaoling 69.4 250
Xiaoling 83.4 251
Xiaoling 107.2 252
Kilight Cao 15.1 253 == **3.2 LoRa Settings** ==
254
255
Kilight Cao 23.1 256 === **3.2.1 LoRa ~-~-> LoRa** ===
Kilight Cao 15.1 257
258
Kilight Cao 23.1 259 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
Kilight Cao 15.1 260
Kilight Cao 23.1 261 //Different LPS8v2 hardware versions can support different frequency ranges~://
Kilight Cao 15.1 262
Xiaoye 83.1 263 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
Kilight Cao 23.1 264 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
Xiaoye 8.1 265
Kilight Cao 23.1 266 (% class="wikigeneratedid" %)
Xiaoling 69.4 267 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
Kilight Cao 23.1 268
Xiaoling 83.4 269
Kilight Cao 23.1 270 (% class="wikigeneratedid" %)
271 [[image:image-20220616110739-1.png||height="372" width="682"]]
272
273
Xiaoling 69.4 274 (((
Xiaoling 103.3 275 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
Xiaoling 69.4 276 )))
Kilight Cao 23.1 277
278
279
280 == **3.3 LoRaWAN Settings** ==
281
282
283 === **3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP** ===
284
285
286 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
287
Xiaoling 83.4 288
Kilight Cao 23.1 289 [[image:image-20220616111932-2.png||height="516" width="672"]]
290
291
Xiaoling 69.5 292
Kilight Cao 23.1 293 === **3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station** ===
294
295
296 //This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
297
Xiaoling 83.4 298
Kilight Cao 23.1 299 [[image:image-20220616113246-3.png||height="396" width="672"]]
300
301
Xiaoling 69.12 302 (((
Xiaoling 103.4 303 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
Xiaoling 69.12 304 )))
Kilight Cao 23.1 305
306
Xiaoling 69.5 307
Kilight Cao 23.1 308 == **3.4 Network Settings** ==
309
310
311 === **3.4.1 Network ~-~-> WiFi** ===
312
313
314 [[image:image-20220616114756-4.png||height="251" width="669"]]
315
316
Xiaoling 69.5 317
Kilight Cao 23.1 318 === **3.4.2 Network ~-~-> System Status** ===
319
320
Xiaoye 83.1 321 [[image:image-20220820134112-2.png||height="539" width="668"]]
Kilight Cao 23.1 322
323
Xiaoling 69.5 324
Kilight Cao 23.1 325 === **3.4.3 Network ~-~-> Firewall** ===
326
327
328 [[image:image-20220616115351-6.png||height="244" width="661"]]
329
330
Xiaoling 69.5 331
Kilight Cao 23.1 332 == **3.5 System** ==
333
334
335 === **3.5.1  System ~-~-> System Overview** ===
336
337
338 Shows the system info:
339
Xiaoling 109.2 340 [[image:image-20220917144512-5.png||height="618" width="853"]]
Kilight Cao 23.1 341
Xiaoling 69.5 342
Xiaoling 107.2 343
Kilight Cao 23.1 344 === **3.5.2 System ~-~-> Backup/Restore** ===
345
346
Xiaoling 109.2 347 [[image:image-20220917144725-6.png||height="208" width="869"]]
Kilight Cao 23.1 348
349
350
Xiaoye 83.1 351 = **4. Build-in Server** =
Xiaoye 53.1 352
Xiaoling 83.4 353
Xiaoye 83.1 354 The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
Xiaoye 53.1 355
Xiaoling 83.4 356
Xiaoling 107.2 357 [[image:image-20220820115644-1.png||height="217" width="778"]]
Xiaoye 53.1 358
359
Xiaoling 83.4 360 (% style="color:red" %)**Note:**
Kilight Cao 58.1 361
Xiaoye 83.1 362 **Path**: System ~-~-> Built-in Server
Kilight Cao 58.1 363
364
Xiaoye 83.1 365 **Troubleshooting:**
Kilight Cao 59.1 366
Xiaoye 60.1 367
Xiaoye 83.1 368 **~ 1. URL does not jump properly**
Xiaoye 60.1 369
Kilight Cao 86.1 370 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
Xiaoye 60.1 371
Kilight Cao 86.1 372 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
Kilight Cao 57.1 373
374
Xiaoling 83.4 375
Xiaoye 83.1 376 == **4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3)** ==
Kilight Cao 58.1 377
Xiaoling 83.4 378
Xiaoling 109.3 379 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
Xiaoling 69.5 380
Xiaoye 83.1 381 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 67.1 382
383
Xiaoye 83.1 384 Login account:
Xiaoling 69.5 385
Xiaoye 83.1 386 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
Xiaoye 53.1 387
Xiaoye 83.1 388 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
Xiaoye 53.1 389
Kilight Cao 59.1 390
Xiaoye 83.1 391 [[image:image-20220725171719-1.png||height="570" width="769"]]
Kilight Cao 59.1 392
393
Xiaoye 60.1 394
Xiaoling 103.9 395 == **4.2 Application Server ~-~- Node-Red** ==
Xiaoling 69.6 396
Xiaoye 53.1 397
Xiaoling 109.3 398 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
Xiaoye 53.1 399
400
Kilight Cao 87.1 401 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
Xiaoye 61.1 402
403
Xiaoye 83.1 404 [[image:image-20220725172124-3.png||height="610" width="843"]]
Xiaoye 61.1 405
406
407
Xiaoye 116.1 408 === **Using Node-Red, InfluxDB and Grafana,** ===
Xiaoye 115.1 409
Xiaoye 116.1 410 The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
Xiaoye 115.1 411
Xiaoye 116.1 412
413 the users can refer to this link to install them.
414
415 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
416
417
Xiaoling 103.5 418 = **5. How users can access LPS8v2 using serial USB** =
Xiaoling 69.6 419
Kilight Cao 74.1 420
Xiaoling 109.3 421 (% style="color:blue" %)**USB TTL to LPS8v2  Connection:**
Kilight Cao 74.1 422
Xiaoling 109.3 423
Kilight Cao 74.1 424 Port 1 of the UART on the LPS8v2 is GND
425
Kilight Cao 79.1 426 (% class="box infomessage" %)
427 (((
Xiaoling 107.2 428 **TXD  <~-~--> UART RXD (Gray line)**
Kilight Cao 74.1 429
Xiaoling 107.2 430 **RXD  <~-~--> UART TXD (White line)**
Kilight Cao 74.1 431
Xiaoling 107.2 432 **GND <~-~--> GND (Black line)**
Kilight Cao 79.1 433 )))
Kilight Cao 74.1 434
435
Kilight Cao 77.1 436 **LPS8v2 UART connection photo**
437
438 [[image:image-20220804163015-1.png||height="621" width="466"]]
439
440
441
Kilight Cao 78.1 442 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
Kilight Cao 77.1 443
Xiaoling 83.4 444
Kilight Cao 77.1 445 [[image:image-20220804164928-3.png||height="320" width="332"]]
446
Xiaoling 83.4 447
Kilight Cao 77.1 448 [[image:image-20220804164747-2.png||height="622" width="594"]]
449
Xiaoling 83.4 450
Xiaoling 107.2 451
Xiaoling 103.5 452 = **6. Use the helium gateway-rs as the Data-only Hotspot** =
Xiaoling 83.4 453
Xiaoye 102.1 454
455 == **Step 1: Configure Frequency Band** ==
456
457
458 //Each country has a requirement for frequency region. Choose the right one for your area.//
459
460 [[image:image-20220905164308-1.png]]
461
462
Xiaoling 107.2 463
Xiaoling 103.5 464 == **Step 2: Configure the forward address** ==
Xiaoye 102.1 465
466
467 **Select one of the servers to configure.**
468
469 **For example:**
470
471 [[image:image-20220905164847-2.png]]
472
473
Xiaoling 107.2 474
Xiaoling 103.5 475 == **Step 3: Download and Install the Helium-gateway-rs** ==
Xiaoye 102.1 476
477
478 **Access the gateway CLI via SSH.**
479
480 [[image:image-20220905165222-3.png]]
481
482
483 **Download gateway-rs.**
484
485 [[image:image-20220905165715-5.png]]
486
487 (% class="box infomessage" %)
488 (((
Xiaoling 103.7 489 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
Xiaoye 102.1 490 )))
491
492
493 **Install gateway-rs.**
494
495 [[image:image-20220905165917-7.png]]
496
497 (% class="box infomessage" %)
498 (((
Xiaoling 103.7 499 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
Xiaoye 102.1 500 )))
501
502
503 **Modify configuration.**
504
505
506 [[image:image-20220905173847-12.png]]
507
508
509 (% class="box infomessage" %)
510 (((
Xiaoling 103.7 511 **region=<Enter regional parameters> \
Xiaoye 102.1 512 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
Xiaoling 103.7 513 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
Xiaoye 102.1 514 )))
515
516
517 **Restart the helium_gateway**
518
519 [[image:image-20220905170920-9.png]]
520
521
522 (% class="box infomessage" %)
523 (((
Xiaoling 103.7 524 **systemctl restart helium_gateway**
Xiaoye 102.1 525 )))
526
527
Xiaoling 103.7 528 **Check the helium_gateway Log：**
Xiaoye 102.1 529
530 [[image:image-20220905173952-13.png]]
531
532
533 (% class="box infomessage" %)
534 (((
Xiaoling 103.7 535 **journalctl -u helium_gateway -f**
Xiaoye 102.1 536 )))
537
538
Xiaoling 103.8 539 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
Xiaoye 102.1 540
541 where the helium gateway log is shown:
542
543 [[image:image-20220905174534-14.png]]
544
545
Xiaoling 103.8 546 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
Xiaoye 102.1 547
548
Xiaoling 107.2 549
Xiaoye 112.1 550 = **7. Trouble Shooting** =
Kilight Cao 23.1 551
Xiaoling 69.6 552
Xiaoling 113.2 553 == 7.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
Xiaoye 112.1 554
555
Xiaoye 113.1 556 [[image:image-20220920135918-1.png]]
Xiaoye 112.1 557
Xiaoling 113.2 558
Xiaoye 112.1 559 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
560
561 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
562
563
564 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
565
566 **Click the update URL button to configure the URL with the current eth port address.**
567
568 [[image:image-20220920141936-2.png]]
569
570
571
572
573 = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
574
575
Kilight Cao 14.1 576 (((
577 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
578 )))
Xiaoye 8.1 579
Kilight Cao 14.1 580 (((
581 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
Kilight Cao 15.1 582
Edwin Chen 50.1 583
Xiaoling 69.6 584
Xiaoye 112.1 585 = **9. Reference** =
Edwin Chen 50.1 586
Xiaoling 69.6 587
Edwin Chen 52.1 588 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
Edwin Chen 80.1 589 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
Edwin Chen 50.1 590
Kilight Cao 15.1 591
Kilight Cao 14.1 592 )))
Xiaoye 8.1 593
Xiaoye 112.1 594 = **10. Order Info** =
Xiaoye 8.1 595
Xiaoling 69.6 596
Edwin Chen 42.1 597 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
Xiaoye 8.1 598
Kilight Cao 14.1 599 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
Xiaoye 8.1 600
Xiaoling 69.6 601 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
602 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
603 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
604 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
605 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
606 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
Xiaoye 8.1 607
Edwin Chen 42.1 608 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
609
Xiaoling 69.6 610 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
611 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
612 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
613 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
Edwin Chen 42.1 614
615 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
616
617
Xiaoling 69.6 618
Xiaoling 103.5 619 = **10. Manufacturer Info** =
Xiaoye 8.1 620
Xiaoling 69.6 621
Xiaoye 8.1 622 **Shenzhen Dragino Technology Development co. LTD**
623
624 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
625
626 LongCheng Street, LongGang District ; Shenzhen 518116,China
627
628
Xiaoling 69.6 629
Xiaoling 103.5 630 = **11. FCC Warning** =
Xiaoye 8.1 631
Xiaoling 69.6 632
Xiaoling 69.12 633 (((
Xiaoye 8.1 634 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Xiaoling 69.12 635 )))
Xiaoye 8.1 636
Xiaoling 69.12 637 (((
Xiaoye 8.1 638 ~-~- Reorient or relocate the receiving antenna.
Xiaoling 69.12 639 )))
Xiaoye 8.1 640
Xiaoling 69.12 641 (((
Xiaoye 8.1 642 ~-~- Increase the separation between the equipment and receiver.
Xiaoling 69.12 643 )))
Xiaoye 8.1 644
Xiaoling 69.12 645 (((
Xiaoye 8.1 646 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Xiaoling 69.12 647 )))
Xiaoye 8.1 648
Xiaoling 69.12 649 (((
Xiaoye 8.1 650 ~-~- Consult the dealer or an experienced radio/TV technician for help.
Xiaoling 69.12 651 )))
Xiaoye 8.1 652
653
Xiaoling 69.12 654 (((
Xiaoye 8.1 655 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Xiaoling 69.12 656 )))
Xiaoye 8.1 657
658
Xiaoling 69.12 659 (((
Xiaoye 8.1 660 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Xiaoling 83.4 661
662
Xiaoye 8.1 663 )))
Xiaoling 69.12 664 )))