Changes for page WGT-11 LoRaWAN Indoor Gateway User Manual

Last modified by Xiaoling on 2023/04/23 09:46

From version < 174.1 >

edited by Kilight Cao
on 2023/04/13 17:14

To version < 180.7 >

edited by Xiaoling
on 2023/04/23 09:44

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)
Attachments (0 modified, 3 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--LPS8v2 LoRaWAN Indoor Gateway User Manual
++WGT-11 LoRaWAN Indoor Gateway User Manual

Author

@@ -1,1 +1,1 @@
--XWiki.Kilight
++XWiki.Xiaoling

Content

@@ -18,28 +18,28 @@
  = 1. Introduction =
--== 1.1 What is LPS8v2 ==
++== 1.1 What is WGT-11 ==
  (((
  (((
--The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
++The WGT-11 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
  )))
  (((
--The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
++The WGT-11 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes WGT-11 work with most LoRaWAN platforms in the market.
  )))
  (((
--LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
++WGT-11 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
  )))
  (((
--Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
++Different countries use different LoRaWAN frequency bands. WGT-11 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
  )))
  (((
--LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
++WGT-11 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
  )))
@@ -66,6 +66,8 @@
  * Storage Temperature: -20 ~~ 70°C
  * Power Input: 5V, 2A, DC
++
++
  == 1.3 Features ==
@@ -84,6 +84,8 @@
  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
++
++
  == 1.4 Block Diagram ==
@@ -91,28 +91,28 @@
  == 1.5 LED Indicators ==
--LPS8-V2 has totally four LEDs, They are:
++WGT-11 has totally four LEDs, They are:
--(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
++(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
--(% style="color:blue" %)//**➢ ETH LED**//(%%)//:   This RGB LED will blink GREEN when the ETH port is connecting//
++(% style="color:blue" %)**➢ ETH LED**(%%):   This RGB LED will blink GREEN when the ETH port is connecting
--(% style="color:blue" %)//**➢ SYS LED**//(%%)//:   This RGB LED will show different colors in different states~://
++(% style="color:blue" %)**➢ SYS LED**(%%):   This RGB LED will show different colors in different states:
--//                     ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
++                     ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
--//                     ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
++                     ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
--//                     ✓** SOLID RED:** Device doesn't have an Internet connection.//
++                     ✓** SOLID RED:** Device doesn't have an Internet connection.
--(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
++(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
  == 1.6 Button Intruction ==
--LPS8-V2 has a black toggle button, which is:
++WGT-11 has a black toggle button, which is:
  (% style="color:blue" %)**//➢ //Long press 4-5s                   : **(%%)the gateway will reload the Network and Initialize wifi configuration
@@ -128,9 +128,9 @@
  = 2. Quick Start =
--The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
++The WGT-11 supports network access via Ethernet or Wi-Fi connection and runs without a network.
--In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
++In most cases, the first thing you need to do is make the WGT-11 accessible to the network.
  == 2.1 Connects to the network and accesses the gateway Web UI ==
@@ -142,7 +142,7 @@
  (((
--Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
++Connect the WGT-11 Ethernet port to your router and WGT-11 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the WGT-11.
  )))
  (((
@@ -153,7 +153,7 @@
--==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
++==== (% style="color:blue" %)**Method 2**(%%):  Connect via WGT-11 Fallback IP ====
  [[image:image-20230107084650-2.png||height="310" width="839"]]
@@ -161,7 +161,7 @@
  (% style="color:blue" %)**Steps to connect via fallback IP:**
--~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
++~1. Connect the PC's Ethernet port to WGT-11's WAN port
 . Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
@@ -171,14 +171,16 @@
  As in the below photo:
--[[image:image-20230413162911-1.png]]
++[[image:image-20230413172038-1.png||height="732" width="1243"]]
  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
++If you still can't access the WGT-11 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
--3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
++3. In the PC, use IP address 172.31.255.254 to access the WGT-11 via Web or Console.
++
  [[image:image-20230111094247-2.png||height="619" width="1250"]]
@@ -209,12 +209,12 @@
  **Web Interface**
--Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
++Open a browser on the PC and type the WGT-11 ip address (depends on your connect method)
  [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
--You will see the login interface of LPS8-V2 as shown below.
++You will see the login interface of WGT-11 as shown below.
  The account details for Web Login are:
@@ -230,16 +230,18 @@
  === 2.2.1  Overview ===
--LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
++WGT-11 supports flexible network set up for different environment. This section describes the typical network topology can be set in WGT-11. The typical network set up includes:
  * **WAN Port Internet Mode**
  * **WiFi Client Mode**
  * **Cellular Mode**
++
++
  === 2.2.2  Use WAN port to access Internet ===
--By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
++By default, the WGT-11 is set to use the WAN port to connect to an upstream network. When you connect the WGT-11's WAN port to an upstream router, WGT-11 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
  [[image:image-20230411100633-2.png||height="501" width="935"]]
@@ -248,7 +248,7 @@
  === 2.2.3  Access the Internet as a WiFi Client ===
--In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
++In the WiFi Client Mode, WGT-11 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
  The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~->  Wi-Fi**
@@ -262,14 +262,14 @@
  (% style="color:blue" %)**Since Hardware version HP0C 1.4**
--Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
++Users can see whether WGT-11 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
--If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
++If the WGT-11 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
  First, install the Micro SIM card as below direction
--Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
++Second, Power off/ ON WGT-11 to let it detect the SIM card.
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
@@ -294,13 +294,13 @@
  [[image:image-20230411101534-3.png||height="544" width="942"]]
--== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
++== 2.3 The WGT-11 is registered and connected to The Things Network ==
  === 2.3.1 Select your area frequency ===
  (((
--First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
++First, you need to set the frequency plan in WGT-11 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
  )))
@@ -311,7 +311,7 @@
  === 2.3.2 Get the only gateway EUI ===
--Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
++Every WGT-11 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
  [[image:image-20220622103355-10.png||height="698" width="949"]]
@@ -365,7 +365,7 @@
  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
--//Different LPS8v2 hardware versions can support different frequency ranges~://
++//Different WGT-11 hardware versions can support different frequency ranges~://
  * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
@@ -397,7 +397,7 @@
  === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
--//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
++This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
  [[image:image-20220616113246-3.png||height="396" width="672"]]
@@ -493,7 +493,7 @@
  = 4. Build-in Server =
--The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
++The default factory version of WGT-11 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
  [[image:image-20230214095318-5.png||height="347" width="980"]]
@@ -532,12 +532,12 @@
  [[image:image-20220725171719-1.png||height="570" width="769"]]
--=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
++=== 4.1.1 The WGT-11 is registered and connected to Built-in The Things Network ===
  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
--The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
++The registration steps are basically similar to [[WGT-11 is registered and connected to The Things Network>>||anchor="H2.3TheWGT-11isregisteredandconnectedtoTheThingsNetwork"]]
  [[image:image-20230321092456-1.png]]
@@ -557,7 +557,7 @@
  === **Using Node-Red, InfluxDB and Grafana** ===
--The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
++The WGT-11 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
  the users can refer to this link to install them.
@@ -567,7 +567,7 @@
  === **Upgrade the node.js** ===
--By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
++By default, the WGT-11 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
  the users can refer to this link to upgrade them.
@@ -613,10 +613,10 @@
  )))
--== 4.4 How to use ChirpStack on LPS8-V2 ==
++== 4.4 How to use ChirpStack on WGT-11 ==
--By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
++By default, the built-in LoRaWAN network server used on WGT-11 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
  [[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
@@ -623,17 +623,17 @@
  [[image:image-20230222094908-1.png||height="133" width="798"]]
--= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
++= 5. How the WGT-11 connects to Chirpstack via gateway-bridge =
--= 6. How users can access LPS8-V2 using serial USB =
++= 6. How users can access WGT-11 using serial USB =
--(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
++(% style="color:blue" %)**USB TTL to WGT-11  Connection:**
--Port 1 of the UART on the LPS8-V2 is GND
++Port 1 of the UART on the WGT-11 is GND
  (% class="box infomessage" %)
  (((
@@ -645,12 +645,12 @@
  )))
--**LPS8v2 UART connection photo**
++**WGT-11 UART connection photo**
--[[image:image-20220804163015-1.png||height="621" width="466"]]
++[[image:image-20230421094319-2.png||height="351" width="392"]]
--In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
++In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for WGT-11. WGT-11 will output system info once power on as below:
  [[image:image-20220804164928-3.png||height="320" width="332"]]
@@ -753,13 +753,13 @@
  [[image:image-20220905174534-14.png]]
--So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
++So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your WGT-11.
  = 8. OTA System Update =
--LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
++WGT-11 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
  = 9. Trouble Shooting =
@@ -785,7 +785,7 @@
  == 9.2  Fallback IP does not work, how can users check ==
--When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
++When the computer has completed the above fallback IP configuration,the WGT-11 Web UI is still not accessible via fallback IP.
  **1.Check whether the configuration is correct**
@@ -808,18 +808,18 @@
  (((
--**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
++**If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].**
  )))
  (((
--**//With your question as detailed as possible. We will reply and help you in the shortest.//**
++**With your question as detailed as possible. We will reply and help you in the shortest.**
  = 11. Reference =
--* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
--* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
++* Install Tago Core: Refer **Install Tago Core in WGT-11** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
++* [[Advance OS Reference Guide for WGT-11>>doc:Main.Armbian OS instruction.WebHome]].
  )))
@@ -827,7 +827,7 @@
  = 12. Order Info =
--(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
++(% style="color:#0000ff" %)**WGT-11-XXX-YYY**
  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band

image-20230413172038-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+119.5 KB

Content

image-20230421094259-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+461.1 KB

Content

image-20230421094319-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+337.6 KB

Content

Changes for page WGT-11 LoRaWAN Indoor Gateway User Manual

Summary

Details

Applications

Navigation