Changes for page WGT-11 LoRaWAN Indoor Gateway User Manual

Last modified by Xiaoling on 2023/04/23 09:46

From version < 171.1 >

edited by Kilight Cao
on 2023/04/13 17:02

To version < 180.6 >

edited by Xiaoling
on 2023/04/23 09:39

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)
Attachments (0 modified, 3 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--LPS8v2 LoRaWAN Indoor Gateway User Manual
++WGT-11 LoRaWAN Indoor Gateway User Manual

Author

@@ -1,1 +1,1 @@
--XWiki.Kilight
++XWiki.Xiaoling

Content

@@ -18,28 +18,28 @@
  = 1. Introduction =
--== 1.1 What is LPS8v2 ==
++== 1.1 What is WGT-11 ==
  (((
  (((
--The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
++The WGT-11 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
  )))
  (((
--The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
++The WGT-11 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes WGT-11 work with most LoRaWAN platforms in the market.
  )))
  (((
--LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
++WGT-11 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
  )))
  (((
--Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
++Different countries use different LoRaWAN frequency bands. WGT-11 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
  )))
  (((
--LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
++WGT-11 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
  )))
@@ -66,7 +66,6 @@
  * Storage Temperature: -20 ~~ 70°C
  * Power Input: 5V, 2A, DC
--
  == 1.3 Features ==
@@ -85,7 +85,6 @@
  * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
  * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
--
  == 1.4 Block Diagram ==
@@ -93,7 +93,7 @@
  == 1.5 LED Indicators ==
--LPS8-V2 has totally four LEDs, They are:
++WGT-11 has totally four LEDs, They are:
  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
@@ -114,7 +114,7 @@
  == 1.6 Button Intruction ==
--LPS8-V2 has a black toggle button, which is:
++WGT-11 has a black toggle button, which is:
  (% style="color:blue" %)**//➢ //Long press 4-5s                   : **(%%)the gateway will reload the Network and Initialize wifi configuration
@@ -130,9 +130,9 @@
  = 2. Quick Start =
--The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
++The WGT-11 supports network access via Ethernet or Wi-Fi connection and runs without a network.
--In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
++In most cases, the first thing you need to do is make the WGT-11 accessible to the network.
  == 2.1 Connects to the network and accesses the gateway Web UI ==
@@ -144,7 +144,7 @@
  (((
--Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
++Connect the WGT-11 Ethernet port to your router and WGT-11 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the WGT-11.
  )))
  (((
@@ -155,7 +155,7 @@
--==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
++==== (% style="color:blue" %)**Method 2**(%%):  Connect via WGT-11 Fallback IP ====
  [[image:image-20230107084650-2.png||height="310" width="839"]]
@@ -163,20 +163,26 @@
  (% style="color:blue" %)**Steps to connect via fallback IP:**
--~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
++~1. Connect the PC's Ethernet port to WGT-11's WAN port
 . Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
++
++Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
++
++
  As in the below photo:
--[[image:image-20230413162911-1.png]]
++[[image:image-20230413172038-1.png||height="732" width="1243"]]
  Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
++If you still can't access the WGT-11 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
--3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
++3. In the PC, use IP address 172.31.255.254 to access the WGT-11 via Web or Console.
++
  [[image:image-20230111094247-2.png||height="619" width="1250"]]
@@ -207,12 +207,12 @@
  **Web Interface**
--Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
++Open a browser on the PC and type the WGT-11 ip address (depends on your connect method)
  [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
--You will see the login interface of LPS8-V2 as shown below.
++You will see the login interface of WGT-11 as shown below.
  The account details for Web Login are:
@@ -228,17 +228,16 @@
  === 2.2.1  Overview ===
--LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
++WGT-11 supports flexible network set up for different environment. This section describes the typical network topology can be set in WGT-11. The typical network set up includes:
  * **WAN Port Internet Mode**
  * **WiFi Client Mode**
  * **Cellular Mode**
--
  === 2.2.2  Use WAN port to access Internet ===
--By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
++By default, the WGT-11 is set to use the WAN port to connect to an upstream network. When you connect the WGT-11's WAN port to an upstream router, WGT-11 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
  [[image:image-20230411100633-2.png||height="501" width="935"]]
@@ -247,7 +247,7 @@
  === 2.2.3  Access the Internet as a WiFi Client ===
--In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
++In the WiFi Client Mode, WGT-11 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
  The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~->  Wi-Fi**
@@ -261,14 +261,14 @@
  (% style="color:blue" %)**Since Hardware version HP0C 1.4**
--Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
++Users can see whether WGT-11 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
--If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
++If the WGT-11 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
  First, install the Micro SIM card as below direction
--Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
++Second, Power off/ ON WGT-11 to let it detect the SIM card.
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
@@ -293,13 +293,13 @@
  [[image:image-20230411101534-3.png||height="544" width="942"]]
--== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
++== 2.3 The WGT-11 is registered and connected to The Things Network ==
  === 2.3.1 Select your area frequency ===
  (((
--First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
++First, you need to set the frequency plan in WGT-11 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
  )))
@@ -310,7 +310,7 @@
  === 2.3.2 Get the only gateway EUI ===
--Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
++Every WGT-11 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
  [[image:image-20220622103355-10.png||height="698" width="949"]]
@@ -364,7 +364,7 @@
  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
--//Different LPS8v2 hardware versions can support different frequency ranges~://
++//Different WGT-11 hardware versions can support different frequency ranges~://
  * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
@@ -492,7 +492,7 @@
  = 4. Build-in Server =
--The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
++The default factory version of WGT-11 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
  [[image:image-20230214095318-5.png||height="347" width="980"]]
@@ -531,12 +531,12 @@
  [[image:image-20220725171719-1.png||height="570" width="769"]]
--=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
++=== 4.1.1 The WGT-11 is registered and connected to Built-in The Things Network ===
  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
--The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
++The registration steps are basically similar to [[WGT-11 is registered and connected to The Things Network>>||anchor="H2.3TheWGT-11isregisteredandconnectedtoTheThingsNetwork"]]
  [[image:image-20230321092456-1.png]]
@@ -556,7 +556,7 @@
  === **Using Node-Red, InfluxDB and Grafana** ===
--The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
++The WGT-11 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
  the users can refer to this link to install them.
@@ -566,7 +566,7 @@
  === **Upgrade the node.js** ===
--By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
++By default, the WGT-11 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
  the users can refer to this link to upgrade them.
@@ -612,10 +612,10 @@
  )))
--== 4.4 How to use ChirpStack on LPS8-V2 ==
++== 4.4 How to use ChirpStack on WGT-11 ==
--By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
++By default, the built-in LoRaWAN network server used on WGT-11 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
  [[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
@@ -622,17 +622,17 @@
  [[image:image-20230222094908-1.png||height="133" width="798"]]
--= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
++= 5. How the WGT-11 connects to Chirpstack via gateway-bridge =
--= 6. How users can access LPS8-V2 using serial USB =
++= 6. How users can access WGT-11 using serial USB =
--(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
++(% style="color:blue" %)**USB TTL to WGT-11  Connection:**
--Port 1 of the UART on the LPS8-V2 is GND
++Port 1 of the UART on the WGT-11 is GND
  (% class="box infomessage" %)
  (((
@@ -644,12 +644,12 @@
  )))
--**LPS8v2 UART connection photo**
++**WGT-11 UART connection photo**
--[[image:image-20220804163015-1.png||height="621" width="466"]]
++[[image:image-20230421094319-2.png||height="351" width="392"]]
--In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
++In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for WGT-11. WGT-11 will output system info once power on as below:
  [[image:image-20220804164928-3.png||height="320" width="332"]]
@@ -752,13 +752,13 @@
  [[image:image-20220905174534-14.png]]
--So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
++So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your WGT-11.
  = 8. OTA System Update =
--LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
++WGT-11 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
  = 9. Trouble Shooting =
@@ -781,6 +781,28 @@
  [[image:image-20220920141936-2.png]]
++== 9.2  Fallback IP does not work, how can users check ==
++
++
++When the computer has completed the above fallback IP configuration,the WGT-11 Web UI is still not accessible via fallback IP.
++
++
++**1.Check whether the configuration is correct**
++
++Run the CMD command to ipconfig and ping 172.31.255.254.
++
++If this fails, the user needs to reconfigure.
++
++[[image:image-20230413170224-3.png||height="433" width="707"]]
++
++[[image:image-20230413170246-4.png]]
++
++
++**2. Check whether the firewall is disabled**
++
++If the firewall is not down, this will affect access to the gateway.
++
++
  = (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
@@ -795,8 +795,8 @@
  = 11. Reference =
--* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
--* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
++* Install Tago Core: Refer **Install Tago Core in WGT-11** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
++* [[Advance OS Reference Guide for WGT-11>>doc:Main.Armbian OS instruction.WebHome]].
  )))
@@ -804,7 +804,7 @@
  = 12. Order Info =
--(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
++(% style="color:#0000ff" %)**WGT-11-XXX-YYY**
  (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band

image-20230413172038-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+119.5 KB

Content

image-20230421094259-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+461.1 KB

Content

image-20230421094319-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+337.6 KB

Content

Changes for page WGT-11 LoRaWAN Indoor Gateway User Manual

Summary

Details

Applications

Navigation