Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 6 added, 0 removed)
  • image-20230413170050-2.png
  • image-20230413170224-3.png
  • image-20230413170246-4.png
  • image-20230413172038-1.png
  • image-20230421094259-1.png
  • image-20230421094319-2.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-LPS8v2 LoRaWAN Indoor Gateway User Manual
	1	+WGT-11 LoRaWAN Indoor Gateway User Manual

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Kilight
	1	+XWiki.Xiaoling

Content

...	...	@@ -18,28 +18,28 @@
18	18
19	19	= 1. Introduction =
20	20
21		-== 1.1 What is LPS8v2 ==
	21	+== 1.1 What is WGT-11 ==
22	22
23	23
24	24	(((
25	25	(((
26		-The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
	26	+The WGT-11 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27	27	)))
28	28
29	29	(((
30		-The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
	30	+The WGT-11 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes WGT-11 work with most LoRaWAN platforms in the market.
31	31	)))
32	32
33	33	(((
34		-LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
	34	+WGT-11 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35	35	)))
36	36
37	37	(((
38		-Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
	38	+Different countries use different LoRaWAN frequency bands. WGT-11 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39	39	)))
40	40
41	41	(((
42		-LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
	42	+WGT-11 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43	43	)))
44	44
45	45
...	...	@@ -95,28 +95,28 @@
95	95	== 1.5 LED Indicators ==
96	96
97	97
98		-LPS8-V2 has totally four LEDs, They are:
	98	+WGT-11 has totally four LEDs, They are:
99	99
100	100
101		-(% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
	101	+(% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
102	102
103		-(% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
	103	+(% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
104	104
105		-(% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
	105	+(% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
106	106
107		-// ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
	107	+ ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
108	108
109		-// ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
	109	+ ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
110	110
111		-// ✓** SOLID RED:** Device doesn't have an Internet connection.//
	111	+ ✓** SOLID RED:** Device doesn't have an Internet connection.
112	112
113		-(% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
	113	+(% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
114	114
115	115
116	116	== 1.6 Button Intruction ==
117	117
118	118
119		-LPS8-V2 has a black toggle button, which is:
	119	+WGT-11 has a black toggle button, which is:
120	120
121	121
122	122	(% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
...	...	@@ -132,9 +132,9 @@
132	132	= 2. Quick Start =
133	133
134	134
135		-The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
	135	+The WGT-11 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136	136
137		-In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
	137	+In most cases, the first thing you need to do is make the WGT-11 accessible to the network.
138	138
139	139
140	140	== 2.1 Connects to the network and accesses the gateway Web UI ==
...	...	@@ -146,7 +146,7 @@
146	146
147	147
148	148	(((
149		-Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
	149	+Connect the WGT-11 Ethernet port to your router and WGT-11 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the WGT-11.
150	150	)))
151	151
152	152	(((
...	...	@@ -157,7 +157,7 @@
157	157
158	158
159	159
160		-==== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ====
	160	+==== (% style="color:blue" %)**Method 2**(%%):  Connect via WGT-11 Fallback IP ====
161	161
162	162
163	163	[[image:image-20230107084650-2.png||height="310" width="839"]]
...	...	@@ -165,17 +165,26 @@
165	165
166	166	(% style="color:blue" %)**Steps to connect via fallback IP:**
167	167
168		-~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
	168	+~1. Connect the PC's Ethernet port to WGT-11's WAN port
169	169
170	170	2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
171	171
	172	+
	173	+Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
	174	+
	175	+
172	172	As in the below photo:
173	173
174		-[[image:image-20230107085904-4.png||height="443" width="361"]]
	178	+[[image:image-20230413172038-1.png||height="732" width="1243"]]
175	175
176	176
177		-3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
	181	+Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
178	178
	183	+If you still can't access the WGT-11 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
	184	+
	185	+
	186	+3. In the PC, use IP address 172.31.255.254 to access the WGT-11 via Web or Console.
	187	+
179	179	[[image:image-20230111094247-2.png||height="619" width="1250"]]
180	180
181	181
...	...	@@ -206,12 +206,12 @@
206	206
207	207	**Web Interface**
208	208
209		-Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
	218	+Open a browser on the PC and type the WGT-11 ip address (depends on your connect method)
210	210
211	211
212	212	[[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
213	213
214		-You will see the login interface of LPS8-V2 as shown below.
	223	+You will see the login interface of WGT-11 as shown below.
215	215
216	216	The account details for Web Login are:
217	217
...	...	@@ -227,7 +227,7 @@
227	227	=== 2.2.1  Overview ===
228	228
229	229
230		-LPS8-V2 supports flexible network set up for different environment. This section describes the typical network topology can be set in LPS8-V2. The typical network set up includes:
	239	+WGT-11 supports flexible network set up for different environment. This section describes the typical network topology can be set in WGT-11. The typical network set up includes:
231	231
232	232	* **WAN Port Internet Mode**
233	233	* **WiFi Client Mode**
...	...	@@ -238,7 +238,7 @@
238	238	=== 2.2.2  Use WAN port to access Internet ===
239	239
240	240
241		-By default, the LPS8-V2 is set to use the WAN port to connect to an upstream network. When you connect the LPS8-V2's WAN port to an upstream router, LPS8-V2 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
	250	+By default, the WGT-11 is set to use the WAN port to connect to an upstream network. When you connect the WGT-11's WAN port to an upstream router, WGT-11 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
242	242
243	243
244	244	[[image:image-20230411100633-2.png||height="501" width="935"]]
...	...	@@ -247,7 +247,7 @@
247	247	=== 2.2.3  Access the Internet as a WiFi Client ===
248	248
249	249
250		-In the WiFi Client Mode, LPS8-V2 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
	259	+In the WiFi Client Mode, WGT-11 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
251	251
252	252	The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
253	253
...	...	@@ -261,14 +261,14 @@
261	261
262	262	(% style="color:blue" %)**Since Hardware version HP0C 1.4**
263	263
264		-Users can see whether LPS8v2 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
	273	+Users can see whether WGT-11 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
265	265
266	266
267		-If the LPS8-V2 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
	276	+If the WGT-11 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
268	268
269	269	First, install the Micro SIM card as below direction
270	270
271		-Second, Power off/ ON LPS8-V2 to let it detect the SIM card.
	280	+Second, Power off/ ON WGT-11 to let it detect the SIM card.
272	272
273	273
274	274	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
...	...	@@ -293,13 +293,13 @@
293	293	[[image:image-20230411101534-3.png||height="544" width="942"]]
294	294
295	295
296		-== 2.3 The LPS8-V2 is registered and connected to The Things Network ==
	305	+== 2.3 The WGT-11 is registered and connected to The Things Network ==
297	297
298	298	=== 2.3.1 Select your area frequency ===
299	299
300	300
301	301	(((
302		-First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
	311	+First, you need to set the frequency plan in WGT-11 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
303	303
304	304
305	305	)))
...	...	@@ -310,7 +310,7 @@
310	310	=== 2.3.2 Get the only gateway EUI ===
311	311
312	312
313		-Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
	322	+Every WGT-11 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
314	314
315	315
316	316	[[image:image-20220622103355-10.png||height="698" width="949"]]
...	...	@@ -364,7 +364,7 @@
364	364
365	365	//This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
366	366
367		-//Different LPS8v2 hardware versions can support different frequency ranges~://
	376	+//Different WGT-11 hardware versions can support different frequency ranges~://
368	368
369	369	* (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
370	370	* (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
...	...	@@ -396,7 +396,7 @@
396	396	=== 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
397	397
398	398
399		-//This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.//
	408	+This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
400	400
401	401
402	402	[[image:image-20220616113246-3.png||height="396" width="672"]]
...	...	@@ -492,7 +492,7 @@
492	492	= 4. Build-in Server =
493	493
494	494
495		-The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
	504	+The default factory version of WGT-11 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
496	496
497	497
498	498	[[image:image-20230214095318-5.png||height="347" width="980"]]
...	...	@@ -531,12 +531,12 @@
531	531	[[image:image-20220725171719-1.png||height="570" width="769"]]
532	532
533	533
534		-=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
	543	+=== 4.1.1 The WGT-11 is registered and connected to Built-in The Things Network ===
535	535
536	536
537	537	Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
538	538
539		-The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
	548	+The registration steps are basically similar to [[WGT-11 is registered and connected to The Things Network>>||anchor="H2.3TheWGT-11isregisteredandconnectedtoTheThingsNetwork"]]
540	540
541	541	[[image:image-20230321092456-1.png]]
542	542
...	...	@@ -556,7 +556,7 @@
556	556
557	557	=== **Using Node-Red, InfluxDB and Grafana** ===
558	558
559		-The LPS8-V2 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
	568	+The WGT-11 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
560	560
561	561
562	562	the users can refer to this link to install them.
...	...	@@ -566,7 +566,7 @@
566	566
567	567	=== **Upgrade the node.js** ===
568	568
569		-By default, the LPS8-V2 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
	578	+By default, the WGT-11 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
570	570
571	571
572	572	the users can refer to this link to upgrade them.
...	...	@@ -612,10 +612,10 @@
612	612	)))
613	613
614	614
615		-== 4.4 How to use ChirpStack on LPS8-V2 ==
	624	+== 4.4 How to use ChirpStack on WGT-11 ==
616	616
617	617
618		-By default, the built-in LoRaWAN network server used on LPS8v2 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
	627	+By default, the built-in LoRaWAN network server used on WGT-11 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
619	619
620	620	[[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
621	621
...	...	@@ -622,17 +622,17 @@
622	622	[[image:image-20230222094908-1.png||height="133" width="798"]]
623	623
624	624
625		-= 5. How the LPS8-V2 connects to Chirpstack via gateway-bridge =
	634	+= 5. How the WGT-11 connects to Chirpstack via gateway-bridge =
626	626
627	627
628	628
629		-= 6. How users can access LPS8-V2 using serial USB =
	638	+= 6. How users can access WGT-11 using serial USB =
630	630
631	631
632		-(% style="color:blue" %)**USB TTL to LPS8-V2  Connection:**
	641	+(% style="color:blue" %)**USB TTL to WGT-11  Connection:**
633	633
634	634
635		-Port 1 of the UART on the LPS8-V2 is GND
	644	+Port 1 of the UART on the WGT-11 is GND
636	636
637	637	(% class="box infomessage" %)
638	638	(((
...	...	@@ -644,12 +644,12 @@
644	644	)))
645	645
646	646
647		-**LPS8v2 UART connection photo**
	656	+**WGT-11 UART connection photo**
648	648
649		-[[image:image-20220804163015-1.png||height="621" width="466"]]
650	650
	659	+[[image:image-20230421094319-2.png||height="351" width="392"]]
651	651
652		-In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
	661	+In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for WGT-11. WGT-11 will output system info once power on as below:
653	653
654	654
655	655	[[image:image-20220804164928-3.png||height="320" width="332"]]
...	...	@@ -752,13 +752,13 @@
752	752	[[image:image-20220905174534-14.png]]
753	753
754	754
755		-So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your LPS8-V2.
	764	+So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your WGT-11.
756	756
757	757
758	758	= 8. OTA System Update =
759	759
760	760
761		-LPS8v2 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
	770	+WGT-11 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
762	762
763	763
764	764	= 9. Trouble Shooting =
...	...	@@ -781,22 +781,44 @@
781	781	[[image:image-20220920141936-2.png]]
782	782
783	783
	793	+== 9.2  Fallback IP does not work, how can users check ==
	794	+
	795	+
	796	+When the computer has completed the above fallback IP configuration,the WGT-11 Web UI is still not accessible via fallback IP.
	797	+
	798	+
	799	+**1.Check whether the configuration is correct**
	800	+
	801	+Run the CMD command to ipconfig and ping 172.31.255.254.
	802	+
	803	+If this fails, the user needs to reconfigure.
	804	+
	805	+[[image:image-20230413170224-3.png||height="433" width="707"]]
	806	+
	807	+[[image:image-20230413170246-4.png]]
	808	+
	809	+
	810	+**2. Check whether the firewall is disabled**
	811	+
	812	+If the firewall is not down, this will affect access to the gateway.
	813	+
	814	+
784	784	= (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
785	785
786	786
787	787	(((
788		-**//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
	819	+**If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].**
789	789	)))
790	790
791	791	(((
792		-**//With your question as detailed as possible. We will reply and help you in the shortest.//**
	823	+**With your question as detailed as possible. We will reply and help you in the shortest.**
793	793
794	794
795	795	= 11. Reference =
796	796
797	797
798		-* Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
799		-* [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
	829	+* Install Tago Core: Refer **Install Tago Core in WGT-11** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
	830	+* [[Advance OS Reference Guide for WGT-11>>doc:Main.Armbian OS instruction.WebHome]].
800	800
801	801
802	802	)))
...	...	@@ -804,7 +804,7 @@
804	804	= 12. Order Info =
805	805
806	806
807		-(% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
	838	+(% style="color:#0000ff" %)**WGT-11-XXX-YYY**
808	808
809	809	(% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
810	810

image-20230413170050-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.5 KB

Content

image-20230413170224-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.1 KB

Content

image-20230413170246-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+10.1 KB

Content

image-20230413172038-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+119.5 KB

Content

image-20230421094259-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+461.1 KB

Content

image-20230421094319-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+337.6 KB

Content