Last modified by Xiaoling on 2023/04/23 09:46
<
From version < 161.1 >
edited by Kilight Cao
on 2023/04/01 09:01
To version < 180.3 >
edited by Xiaoling
on 2023/04/23 09:33
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8v2 LoRaWAN Indoor Gateway User Manual
1 +WGT-11 LoRaWAN Indoor Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -18,28 +18,28 @@
18 18  
19 19  = 1. Introduction =
20 20  
21 -== 1.1 What is LPS8v2 ==
21 +== 1.1 What is WGT-11 ==
22 22  
23 23  
24 24  (((
25 25  (((
26 -The LPS8v2 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
26 +The WGT-11 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 27  )))
28 28  
29 29  (((
30 -The LPS8v2 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes LPS8V2 work with most LoRaWAN platforms in the market.
30 +The WGT-11 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes WGT-11 work with most LoRaWAN platforms in the market.
31 31  )))
32 32  
33 33  (((
34 -LPS8v2 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
34 +WGT-11 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 35  )))
36 36  
37 37  (((
38 -Different countries use different LoRaWAN frequency bands. LPS8v2 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
38 +Different countries use different LoRaWAN frequency bands. WGT-11 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 39  )))
40 40  
41 41  (((
42 -LPS8v2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
42 +WGT-11 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 43  )))
44 44  
45 45  
... ... @@ -91,7 +91,7 @@
91 91  == 1.5 LED Indicators ==
92 92  
93 93  
94 -LPS8-V2 has totally four LEDs, They are:
94 +WGT-11 has totally four LEDs, They are:
95 95  
96 96  
97 97  (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
... ... @@ -112,7 +112,7 @@
112 112  == 1.6 Button Intruction ==
113 113  
114 114  
115 -LPS8-V2 has a black toggle button, which is:
115 +WGT-11 has a black toggle button, which is:
116 116  
117 117  
118 118  (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
... ... @@ -128,21 +128,21 @@
128 128  = 2. Quick Start =
129 129  
130 130  
131 -The LPS8-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
131 +The WGT-11 supports network access via Ethernet or Wi-Fi connection and runs without a network.
132 132  
133 -In most cases, the first thing you need to do is make the lps8-v2 accessible to the network.
133 +In most cases, the first thing you need to do is make the WGT-11 accessible to the network.
134 134  
135 135  
136 136  == 2.1 Connects to the network and accesses the gateway Web UI ==
137 137  
138 -== 2.1.1 connect the network ==
138 +=== 2.1.1 connect the network ===
139 139  
140 140  
141 -=== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
141 +==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
142 142  
143 143  
144 144  (((
145 -Connect the LPS8-V2 Ethernet port to your router and LPS8-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8-V2.
145 +Connect the WGT-11 Ethernet port to your router and WGT-11 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the WGT-11.
146 146  )))
147 147  
148 148  (((
... ... @@ -152,32 +152,41 @@
152 152  [[image:image-20220622100129-1.png||height="332" width="1263"]]
153 153  
154 154  
155 -=== (% style="color:blue" %)**Method 2**(%%):  Connect via LPS8-V2 Fallback IP ===
156 156  
156 +==== (% style="color:blue" %)**Method 2**(%%):  Connect via WGT-11 Fallback IP ====
157 157  
158 +
158 158  [[image:image-20230107084650-2.png||height="310" width="839"]]
159 159  
160 160  
161 161  (% style="color:blue" %)**Steps to connect via fallback IP:**
162 162  
163 -~1. Connect the PC's Ethernet port to LPS8-V2's WAN port
164 +~1. Connect the PC's Ethernet port to WGT-11's WAN port
164 164  
165 165  2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
166 166  
168 +
169 +Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
170 +
171 +
167 167  As in the below photo:
168 168  
169 -[[image:image-20230107085904-4.png||height="443" width="361"]]
174 +[[image:image-20230413172038-1.png||height="732" width="1243"]]
170 170  
171 -3. In the PC, use IP address 172.31.255.254 to access the LPS8-V2 via Web or Console.
172 172  
177 +Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
173 173  
174 -[[image:image-20230111094247-2.png||height="619" width="1250"]]
179 +If you still can't access the WGT-11 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
175 175  
176 176  
182 +3. In the PC, use IP address 172.31.255.254 to access the WGT-11 via Web or Console.
177 177  
178 -=== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ===
184 +[[image:image-20230111094247-2.png||height="619" width="1250"]]
179 179  
180 180  
187 +
188 +==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
189 +
181 181  [[image:image-20220622100542-2.png||height="369" width="1256"]]
182 182  
183 183  
... ... @@ -197,17 +197,17 @@
197 197  [[image:image-20220622102901-8.png||height="476" width="938"]]
198 198  
199 199  
200 -== 2.1.2 Access Configure Web UI ==
209 +=== 2.1.2 Access Configure Web UI ===
201 201  
202 202  
203 203  **Web Interface**
204 204  
205 -Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method)
214 +Open a browser on the PC and type the WGT-11 ip address (depends on your connect method)
206 206  
207 207  
208 208  [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
209 209  
210 -You will see the login interface of LPS8-V2 as shown below.
219 +You will see the login interface of WGT-11 as shown below.
211 211  
212 212  The account details for Web Login are:
213 213  
... ... @@ -218,13 +218,82 @@
218 218  [[image:image-20230106153501-1.png||height="367" width="894"]]
219 219  
220 220  
221 -== 2.2 The LPS8-V2 is registered and connected to The Things Network ==
230 +== 2.2  Typical Network Setup ==
222 222  
223 -=== 2.2.1 Select your area frequency ===
232 +=== 2.2.1  Overview ===
224 224  
225 225  
235 +WGT-11 supports flexible network set up for different environment. This section describes the typical network topology can be set in WGT-11. The typical network set up includes:
236 +
237 +* **WAN Port Internet Mode**
238 +* **WiFi Client Mode**
239 +* **Cellular Mode**
240 +
241 +=== 2.2.2  Use WAN port to access Internet ===
242 +
243 +
244 +By default, the WGT-11 is set to use the WAN port to connect to an upstream network. When you connect the WGT-11's WAN port to an upstream router, WGT-11 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
245 +
246 +
247 +[[image:image-20230411100633-2.png||height="501" width="935"]]
248 +
249 +
250 +=== 2.2.3  Access the Internet as a WiFi Client ===
251 +
252 +
253 +In the WiFi Client Mode, WGT-11 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
254 +
255 +The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
256 +
257 +[[image:image-20230411095739-1.png||height="264" width="691"]]
258 +
259 +In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
260 +
261 +
262 +=== 2.2.4  Use built-in 4G modem for internet access ===
263 +
264 +
265 +(% style="color:blue" %)**Since Hardware version HP0C 1.4**
266 +
267 +Users can see whether WGT-11 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
268 +
269 +
270 +If the WGT-11 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
271 +
272 +First, install the Micro SIM card as below direction
273 +
274 +Second, Power off/ ON WGT-11 to let it detect the SIM card.
275 +
276 +
277 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
278 +
279 +
280 +The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
281 +
282 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
283 +
284 +
285 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
286 +
287 +
288 +=== 2.2.5  Check Internet connection ===
289 +
290 +In the **home** page, we can check the Internet connection.
291 +
292 +* GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
293 +* Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
294 +* RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
295 +
296 +[[image:image-20230411101534-3.png||height="544" width="942"]]
297 +
298 +
299 +== 2.3 The WGT-11 is registered and connected to The Things Network ==
300 +
301 +=== 2.3.1 Select your area frequency ===
302 +
303 +
226 226  (((
227 -First, you need to set the frequency plan in LPS8-V2 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
305 +First, you need to set the frequency plan in WGT-11 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
228 228  
229 229  
230 230  )))
... ... @@ -232,10 +232,10 @@
232 232  [[image:image-20220622103332-9.png||height="485" width="938"]]
233 233  
234 234  
235 -=== 2.2.2 Get the only gateway EUI ===
313 +=== 2.3.2 Get the only gateway EUI ===
236 236  
237 237  
238 -Every LPS8-V2 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
316 +Every WGT-11 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
239 239  
240 240  
241 241  [[image:image-20220622103355-10.png||height="698" width="949"]]
... ... @@ -256,7 +256,7 @@
256 256  [[image:image-20220622103956-12.png]]
257 257  
258 258  
259 -=== 2.2.3 Register the gateway to The Things Network ===
337 +=== 2.3.3 Register the gateway to The Things Network ===
260 260  
261 261  
262 262  **Login to The Things Network**
... ... @@ -289,7 +289,7 @@
289 289  
290 290  //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
291 291  
292 -//Different LPS8v2 hardware versions can support different frequency ranges~://
370 +//Different WGT-11 hardware versions can support different frequency ranges~://
293 293  
294 294  * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
295 295  * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
... ... @@ -417,7 +417,7 @@
417 417  = 4. Build-in Server =
418 418  
419 419  
420 -The default factory version of LPS8-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
498 +The default factory version of WGT-11 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
421 421  
422 422  
423 423  [[image:image-20230214095318-5.png||height="347" width="980"]]
... ... @@ -456,12 +456,12 @@
456 456  [[image:image-20220725171719-1.png||height="570" width="769"]]
457 457  
458 458  
459 -=== 4.1.1 The LPS8-V2 is registered and connected to Built-in The Things Network ===
537 +=== 4.1.1 The WGT-11 is registered and connected to Built-in The Things Network ===
460 460  
461 461  
462 462  Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
463 463  
464 -The registration steps are basically similar to [[LPS8-V2 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
542 +The registration steps are basically similar to [[WGT-11 is registered and connected to The Things Network>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H2.2TheLPS8-V2isregisteredandconnectedtoTheThingsNetwork]]
465 465  
466 466  [[image:image-20230321092456-1.png]]
467 467  
... ... @@ -571,8 +571,8 @@
571 571  
572 572  **LPS8v2 UART connection photo**
573 573  
574 -[[image:image-20220804163015-1.png||height="621" width="466"]]
575 575  
653 +[[image:image-20230421094319-2.png||height="351" width="392"]]
576 576  
577 577  In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LPS8v2. LPS8v2 will output system info once power on as below:
578 578  
... ... @@ -706,6 +706,28 @@
706 706  [[image:image-20220920141936-2.png]]
707 707  
708 708  
787 +== 9.2  Fallback IP does not work, how can users check ==
788 +
789 +
790 +When the computer has completed the above fallback IP configuration,the LPS8v2 Web UI is still not accessible via fallback IP.
791 +
792 +
793 +**1.Check whether the configuration is correct**
794 +
795 +Run the CMD command to ipconfig and ping 172.31.255.254.
796 +
797 +If this fails, the user needs to reconfigure.
798 +
799 +[[image:image-20230413170224-3.png||height="433" width="707"]]
800 +
801 +[[image:image-20230413170246-4.png]]
802 +
803 +
804 +**2. Check whether the firewall is disabled**
805 +
806 +If the firewall is not down, this will affect access to the gateway.
807 +
808 +
709 709  = (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
710 710  
711 711  
fallback ip.mp4
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +5.1 MB
Content
image-20230411095739-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230411100633-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +360.9 KB
Content
image-20230411101534-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +404.3 KB
Content
image-20230413162911-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +21.2 KB
Content
image-20230413170050-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.5 KB
Content
image-20230413170224-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
image-20230413170246-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20230413172038-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.5 KB
Content
image-20230421094259-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +461.1 KB
Content
image-20230421094319-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +337.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0