Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -326,48 +326,64 @@
326	326	We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
327	327	)))
328	328
	329	+(% style="text-align:center" %)
329	329	[[image:1651745267862-321.png||height="526" width="621"]]
330	330
	332	+
	333	+
	334	+(% style="text-align:center" %)
331	331	[[image:1651745306744-481.png||height="478" width="621"]]
332	332
333	333	After set up, the status should show not connected as below:
334	334
	339	+(% style="text-align:center" %)
335	335	[[image:1651745366987-458.png||height="363" width="621"]]
336	336
337	337
338	338	===== 5.2.1 Download and install LoRaWAN packet forwarder =====
339	339
340		-Enable SPI and I2C first:
	345	+ Enable SPI and I2C first:
341	341
342		-a)SPI needs to be enabled on the Raspberry Pi
	347	+ a)SPI needs to be enabled on the Raspberry Pi
343	343
344		-Run sudo raspi-config to open the config window
	349	+ Run sudo raspi-config to open the config window
345	345
	351	+(% style="text-align:center" %)
346	346	[[image:1651745476754-240.png||height="235" width="631"]]
347	347
	354	+
	355	+(% style="text-align:center" %)
348	348	[[image:image-20220505181135-1.png]]
349	349
	358	+(% style="text-align:center" %)
350	350	[[image:image-20220505181135-2.png]]
351	351
352		-In RPI , Fist: Enter root account:
353	353
	362	+
	363	+
	364	+ In RPI , Fist: Enter root account:
	365	+
	366	+(% style="text-align:center" %)
354	354	[[image:1651745583363-614.png]]
355	355
356	356
357		-and then run:
	370	+ and then run:
358	358
359		-wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
	372	+ wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
360	360
361		-chmod +x ./auto_install.sh
	374	+ chmod +x ./auto_install.sh
362	362
363		-./auto_install.sh
	376	+ ./auto_install.sh
364	364
	378	+(% style="text-align:center" %)
365	365	[[image:1651745611629-818.png]]
366	366
367		-This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
368	368
369		-You can get these output:
	382	+ This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
370	370
	384	+ You can get these output:
	385	+
	386	+(% style="text-align:center" %)
371	371	[[image:1651745657252-173.png||height="426" width="621"]]
372	372
373	373
...	...	@@ -374,36 +374,52 @@
374	374	===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
375	375
376	376	(((
377		-After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json.**
	393	+ After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the
378	378	)))
379	379
380	380	(((
381		-The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
	397	+**~ gateway_ID** in file **local_conf.json**
382	382	)))
383	383
	400	+(((
	401	+ The default LoRaWAN server points to localhost, user need to put the correct server address to the
	402	+)))
	403	+
	404	+(((
	405	+ server_address field in file **local_conf.json**, like below.
	406	+)))
	407	+
	408	+(% style="text-align:center" %)
384	384	[[image:1651745709709-887.png||height="820" width="621"]]
385	385
386		-User can find the TTN v3 server address from:
387	387
388		-[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
	412	+ User can find the TTN v3 server address from:
389	389
	414	+ [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
390	390
391		-And the default frequency band is US915 in **global_conf.json** file.
392	392
	417	+ And the default frequency band is US915 in **global_conf.json** file.
	418	+
	419	+(% style="text-align:center" %)
393	393	[[image:1651745838008-820.png||height="650" width="621"]]
394	394
	422	+
395	395	* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
396	396
397		- 1).Chose your need the name of region frequency.
	425	+ 1).Chose your need the name of region frequency.
398	398
	427	+(% style="text-align:center" %)
399	399	[[image:1651745867516-322.png]]
400	400
	430	+
401	401	2). Use this command to copy it.
402	402
403	403	cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
404	404
	435	+(% style="text-align:center" %)
405	405	[[image:1651745984006-868.png]]
406	406
	438	+
407	407	* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
408	408
409	409	(% class="wikigeneratedid" %)
...	...	@@ -414,36 +414,32 @@
414	414	===== 5.2.3 Check result =====
415	415
416	416	(((
417		-Run below command to restart the dragino_fwd:
	449	+ Run below command to restart the dragino_fwd:
418	418	)))
419	419
420	420	(((
421		-(% class="box infomessage" %)
422		-(((
423		-sudo systemctl stop draginofwd
	453	+ sudo systemctl stop draginofwd
424	424	)))
425	425
426		-(% class="box infomessage" %)
427	427	(((
428		-sudo systemctl start draginofwd
	457	+ sudo systemctl start draginofwd
429	429	)))
430		-)))
431	431
432	432	(((
433		-debug check the ruing status of fwd:
	461	+ debug check the ruing status of fwd:
434	434	)))
435	435
436	436	(((
437		-(% class="box infomessage" %)
438		-(((
439		-sudo systemctl status draginofwd
	465	+ sudo systemctl status draginofwd
440	440	)))
441		-)))
442	442
	468	+(% style="text-align:center" %)
443	443	[[image:1651746045057-414.png]]
444	444
445		-The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
446	446
	472	+ The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
	473	+
	474	+(% style="text-align:center" %)
447	447	[[image:1651746078253-168.png||height="372" width="621"]]
448	448
449	449