Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 98.6 >
edited by Xiaoling
on 2022/05/07 13:35
To version < 99.4 >
edited by Xiaoling
on 2022/05/14 17:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,70 +3,39 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg||height="391" width="549"]]
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 12  **PG1302 LoRaWAN Concentrator User Manual**
13 13  
14 14  
9 +**Contents:**
15 15  
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
19 += 1. Introduction =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
21 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
31 31  
32 32  (((
33 -(((
34 -(((
35 -(((
36 36  The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
37 37  )))
38 -)))
39 -)))
40 40  
41 41  (((
42 -(((
43 -(((
44 44  The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
45 45  )))
46 -)))
47 -)))
48 -)))
49 49  
50 50  (((
51 -(((
52 -(((
53 -(((
54 54  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
55 55  )))
56 -)))
57 -)))
58 -)))
59 59  
60 -(((
61 -(((
62 -
63 -)))
64 -)))
35 +== 1.2 Features ==
65 65  
66 -==== 1.2 Features ====
67 -
68 68  * Base on Semtech SX1302 solution
69 69  * Support Raspberry Pi 3B/3B+/4
70 70  * Up to -140dBm sensitivity
... ... @@ -72,40 +72,28 @@
72 72  * Mini-PCIe Interface
73 73  * Converter board to support Raspberry Pi
74 74  
75 -==== 1.3 General Interfaces ====
44 +== 1.3 General Interfaces ==
76 76  
77 77  * SPI interface for LoRa
78 78  * Power Input: 5v, 1A
79 79  * 1 x I-PEX for LoRa
80 80  
81 -==== 1.4 Pin Mapping ====
50 +== 1.4 Pin Mapping ==
82 82  
83 83   [[image:1651743282627-547.png||height="402" width="425"]]
84 84  
54 +== 1.5 LEDs ==
85 85  
86 -
87 -==== 1.5 LEDs ====
88 -
89 -(((
90 90   TX: Blink when transmit a packet
91 -)))
92 -
93 -(((
94 94   RX: Blink when receive a packet
95 -)))
96 -
97 -(((
98 98   Config: Always ON
99 -)))
100 100  
60 +== 1.6 Power Consumption ==
101 101  
102 -==== 1.6 Power Consumption ====
103 -
104 104   TBD
105 105  
64 +== 1.7 Applications ==
106 106  
107 -==== 1.7 Applications ====
108 -
109 109  * Smart Buildings & Home Automation
110 110  * Logistics and Supply Chain Management
111 111  * Smart Metering
... ... @@ -113,50 +113,38 @@
113 113  * Smart Cities
114 114  * Smart Factory
115 115  
116 -=== 2. Example: Set up as LoRaWAN gateway. ===
73 += 2. Example: Set up as LoRaWAN gateway. =
117 117  
118 -==== 2.1 System structure ====
75 +== 2.1 System structure ==
119 119  
120 -(((
121 121  This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
122 -)))
123 123  
124 124  [[image:1651743698677-436.png||height="457" width="686"]]
125 125  
81 +== 2.2 Hardware Installation ==
126 126  
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
127 127  
128 -==== 2.2 Hardware Installation ====
129 -
130 -**Important Notice: **Please power the RPI with 5V,3A cable.
131 -
132 132  [[image:1651743803032-803.png]]
133 133  
87 += 3. Install the software? =
134 134  
89 +There are two ways to install software in RPi4 to use PG1302.
135 135  
136 -=== 3. Install the software? ===
137 -
138 - There are two ways to install software in RPi4 to use PG1302.
139 -
140 140  * Flash SD card with Dragino pre-build image which support Web UI.
141 141  * Install lora packet forwarder in existing RPi OS.
142 142  
143 -=== 4. Flash with pre-build image ===
94 += 4. Flash with pre-build image =
144 144  
145 -==== 4.1 Download the dragino image for RPI ====
96 +== 4.1 Download the dragino image for RPI ==
146 146  
147 -(((
148 - Download PG1302_for_Rpi4_64_with_webui from
149 -)))
98 +Download PG1302_for_Rpi4_64_with_webui from
99 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
150 150  
151 -(((
152 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
153 -)))
101 +== 4.2 Flash the image to SD card ==
154 154  
103 +Flash the image to SD card:
155 155  
156 -==== 4.2 Flash the image to SD card ====
157 -
158 - Flash the image to SD card:
159 -
160 160  [[image:1651744119133-233.png||height="373" width="621"]]
161 161  
162 162   Note: Download the flash tool following this link
... ... @@ -163,332 +163,263 @@
163 163  
164 164   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
165 165  
111 +== 4.3 Access the Linux console ==
166 166  
167 -==== 4.3 Access the Linux console ====
113 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
168 168  
169 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
170 -
171 -Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
172 -
173 173  [[image:1651744193675-591.png||height="450" width="466"]]
174 174  
117 +The account details for Web Login are:
175 175  
176 - The account details for Web Login are:
177 -
178 -**~ User Name: root**
179 -
180 -**~ Password:   dragino**
181 -
182 -
183 -**~ Backup account**
184 -
185 -**~ Pi/dragino**
186 -
187 -
188 - After log in, you will be in the Linux console and type command here.
189 -
190 -[[image:1651744358515-107.png||height="366" width="581"]]
191 -
192 -
193 -==== 4.4 Access the WebUI of RPi4. ====
194 -
195 -===== 4.4.1 Home page =====
196 -
197 197  (((
198 -Open a browser on the PC and type the RPI ip address
120 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
199 199  )))
200 200  
201 201  (((
202 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
124 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
203 203  )))
204 204  
205 205  (((
206 -You will see the login interface of RPI as shown below.
128 +
207 207  )))
208 208  
209 209  (((
210 -The account details for Web Login are:
132 +**~ (% style="color:#0000ff" %)Backup account(%%)**
211 211  )))
212 212  
213 213  (((
214 -**~ User Name: root**
136 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
215 215  )))
216 216  
217 -(((
218 -**~ Password:   dragino**
219 -)))
139 +After log in, you will be in the Linux console and type command here.
220 220  
221 -[[image:1651744457761-993.png||height="352" width="621"]]
141 +[[image:1651744358515-107.png||height="366" width="581"]]
222 222  
143 +== 4.4 Access the WebUI of RPi4. ==
223 223  
224 -===== 4.4.2 LoRa Page =====
145 +=== 4.4.1 Home page ===
225 225  
226 -(((
227 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN
228 -)))
147 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
148 +You will see the login interface of RPI as shown below.
149 +The account details for Web Login are:
229 229  
230 230  (((
231 - protocol, and user can customize the band* as well.
152 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
153 +(% style="color:#0000ff" %)** Password:   dragino**
232 232  )))
233 233  
234 -(% style="text-align:center" %)
235 -[[image:1651744554845-970.png||height="328" width="621"]]
156 +[[image:1651744457761-993.png||height="352" width="621"]]
236 236  
237 - Different PG1302 hardware version can support different frequency range:
158 +=== 4.4.2 LoRa Page ===
238 238  
239 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
160 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
240 240  
241 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
162 +[[image:1651744554845-970.png||height="328" width="621"]]
242 242  
243 - After user choose the frequency plan, he can see the actually frequency in used by checking the
164 +Different PG1302 hardware version can support different frequency range:
244 244  
245 - page LogRead ~-~-> LoRa Log
166 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
246 246  
247 - Note *: See this instruction for how to customize frequency band
168 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
248 248  
249 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
170 +After user choose the frequency plan, he can see the actually frequency in used by checking the
250 250  
172 +page LogRead ~-~-> LoRa Log
251 251  
252 -===== 4.4.3 LoRaWAN Page =====
174 +Note *: See this instruction for how to customize frequency band
253 253  
254 -====== 4.4.3.1 Semtech UDP ======
176 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
255 255  
178 +=== 4.4.3 LoRaWAN Page ===
256 256  
257 -(% style="text-align:center" %)
180 +==== 4.4.3.1 Semtech UDP ====
181 +
258 258  [[image:1651744767914-283.png||height="352" width="621"]]
259 259  
260 - Note *: See this instruction for how to configure TTN.
184 +Note *: See this instruction for how to configure TTN.
261 261  
262 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
186 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
263 263  
188 +==== 4.4.3.2 Basic Station ====
264 264  
265 -====== 4.4.3.2 Basic Station ======
266 -
267 -(% style="text-align:center" %)
268 268  [[image:1651744890629-683.png||height="380" width="621"]]
269 269  
270 - Note *: See this instruction for how to configure TTN.
192 +Note *: See this instruction for how to configure TTN.
271 271  
272 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
194 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
273 273  
196 +=== 4.4.4 LogRead ===
274 274  
275 -===== 4.4.4 LogRead =====
198 +==== 4.4.4.1 LoRa Log ====
276 276  
277 -====== 4.4.4.1 LoRa Log ======
278 -
279 -(% style="text-align:center" %)
280 280  [[image:1651744955955-452.png||height="571" width="621"]]
281 281  
282 - Show the frequency for LoRa Radio and traffics.
202 +Show the frequency for LoRa Radio and traffics.
283 283  
204 +==== 4.4.4.2 System Log ====
284 284  
285 -====== 4.4.4.2 System Log ======
206 +Show system log.
286 286  
287 - Show system log.
288 -
289 -(% style="text-align:center" %)
290 290  [[image:1651745003470-264.png||height="477" width="621"]]
291 291  
210 +==== 4.4.4.3 Record Log ====
292 292  
212 +**Record the system log.**
293 293  
294 -====== 4.4.4.3 Record Log ======
295 -
296 -**~ Record the system log.**
297 -
298 -(% style="text-align:center" %)
299 299  [[image:1651745069814-662.png||height="144" width="621"]]
300 300  
216 += 5. Install stand alone LoRa Packet Forwarder. =
301 301  
302 -=== 5. Install stand alone LoRa Packet Forwarder. ===
218 +== 5.1 OS requirement ==
303 303  
304 -==== 5.1 OS requirement ====
220 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
305 305  
306 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
307 -
308 - pi@raspberrypi:~~$ cat /etc/os-release
309 -
222 +(% class="box" %)
223 +(((
224 + pi@raspberrypi:~~$ cat /etc/os-release
310 310   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
311 -
312 312   NAME="Raspbian GNU/Linux"
313 -
314 314   VERSION_ID="8"
315 -
316 316   VERSION="8 (jessie)"
317 -
318 318   ID=raspbian
319 -
320 320   ID_LIKE=debian
321 -
322 322   HOME_URL="http:~/~/www.raspbian.org/"
323 -
324 324   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
325 -
326 326   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
234 +)))
327 327  
236 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
328 328  
329 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
238 +In RPI, run below command to get a Gateway ID
330 330  
331 - In RPI, run below command to get a Gateway ID
240 +(% class="box infomessage" %)
241 +(((
242 + ifconfig eth0
243 +)))
332 332  
333 - (% class="mark" %)ifconfig eth0
334 -
335 -(% style="text-align:center" %)
336 336  [[image:1651745210205-512.png||height="130" width="621"]]
337 337  
338 338  (((
339 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the
340 -)))
341 -
342 342  (((
343 - gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
249 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
344 344  )))
251 +)))
345 345  
346 -(% style="text-align:center" %)
347 347  [[image:1651745267862-321.png||height="526" width="621"]]
348 348  
349 -
350 -
351 -(% style="text-align:center" %)
352 352  [[image:1651745306744-481.png||height="478" width="621"]]
353 353  
354 354  After set up, the status should show not connected as below:
355 355  
356 -(% style="text-align:center" %)
357 357  [[image:1651745366987-458.png||height="363" width="621"]]
358 358  
261 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
359 359  
360 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
263 +Enable SPI and I2C first:
361 361  
362 - Enable SPI and I2C first:
265 +a)SPI needs to be enabled on the Raspberry Pi
363 363  
364 - a)SPI needs to be enabled on the Raspberry Pi
267 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
365 365  
366 - Run sudo raspi-config to open the config window
269 +[[image:1651745476754-240.png||height="234" width="629"]]
367 367  
368 -(% style="text-align:center" %)
369 -[[image:1651745476754-240.png||height="235" width="631"]]
370 -
371 -
372 -(% style="text-align:center" %)
373 373  [[image:image-20220505181135-1.png]]
374 374  
375 -(% style="text-align:center" %)
376 -[[image:image-20220505181135-2.png]]
273 +[[image:image-20220505181135-2.png||height="229" width="622"]]
377 377  
275 +In RPI , Fist: Enter root account:
378 378  
277 +(((
278 +[[image:1651745583363-614.png||height="151" width="732"]]
279 +)))
379 379  
281 +and then run:
380 380  
381 - In RPI , Fist: Enter root account:
283 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
382 382  
383 -(% style="text-align:center" %)
384 -[[image:1651745583363-614.png]]
285 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
385 385  
287 +(% style="background-color:#dcdcdc" %)./auto_install.sh
386 386  
387 - and then run:
289 +(((
290 +[[image:1651745611629-818.png||height="225" width="729"]]
291 +)))
388 388  
389 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
293 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
390 390  
391 - chmod +x ./auto_install.sh
295 +You can get these output:
392 392  
393 - ./auto_install.sh
394 -
395 -(% style="text-align:center" %)
396 -[[image:1651745611629-818.png]]
397 -
398 -
399 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
400 -
401 - You can get these output:
402 -
403 -(% style="text-align:center" %)
404 -[[image:1651745657252-173.png||height="426" width="621"]]
405 -
406 -
407 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
408 -
409 409  (((
410 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the
298 +[[image:1651745657252-173.png||height="426" width="621"]]
411 411  )))
412 412  
413 -(((
414 -**~ gateway_ID** in file **local_conf.json**
415 -)))
301 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
416 416  
417 417  (((
418 - The default LoRaWAN server points to localhost, user need to put the correct server address to the
304 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
419 419  )))
420 420  
421 421  (((
422 - server_address field in file **local_conf.json**, like below.
308 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
423 423  )))
424 424  
425 -(% style="text-align:center" %)
426 426  [[image:1651745709709-887.png||height="820" width="621"]]
427 427  
313 +User can find the TTN v3 server address from:
428 428  
429 - User can find the TTN v3 server address from:
315 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
430 430  
431 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
317 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
432 432  
433 -
434 - And the default frequency band is US915 in **global_conf.json** file.
435 -
436 -(% style="text-align:center" %)
437 437  [[image:1651745838008-820.png||height="650" width="621"]]
438 438  
321 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
439 439  
440 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
323 + 1).Chose your need the name of region frequency.
441 441  
442 - 1).Chose your need the name of region frequency.
325 +[[image:1651745867516-322.png||height="83" width="740"]]
443 443  
444 -(% style="text-align:center" %)
445 -[[image:1651745867516-322.png]]
446 -
447 -
448 448   2). Use this command to copy it.
449 449  
450 450   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
451 451  
452 -(% style="text-align:center" %)
453 -[[image:1651745984006-868.png]]
331 +[[image:1651745984006-868.png||height="87" width="745"]]
454 454  
333 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
455 455  
456 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
335 +=== 5.2.3 Check result ===
457 457  
458 -(% class="wikigeneratedid" %)
459 459  (((
460 -
338 +Run below command to restart the dragino_fwd:
461 461  )))
462 462  
463 -===== 5.2.3 Check result =====
464 -
465 465  (((
466 - Run below command to restart the dragino_fwd:
467 -)))
468 -
342 +(% class="box infomessage" %)
469 469  (((
470 - sudo systemctl stop draginofwd
344 +sudo systemctl stop draginofwd
471 471  )))
472 472  
347 +(% class="box infomessage" %)
473 473  (((
474 - sudo systemctl start draginofwd
349 +sudo systemctl start draginofwd
475 475  )))
351 +)))
476 476  
477 477  (((
478 - debug check the ruing status of fwd:
354 +debug check the ruing status of fwd:
479 479  )))
480 480  
481 481  (((
482 - sudo systemctl status draginofwd
358 +(% class="box infomessage" %)
359 +(((
360 +sudo systemctl status draginofwd
483 483  )))
362 +)))
484 484  
485 -(% style="text-align:center" %)
486 -[[image:1651746045057-414.png]]
364 +[[image:1651746045057-414.png||height="193" width="729"]]
487 487  
366 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
488 488  
489 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
490 -
491 -(% style="text-align:center" %)
492 492  [[image:1651746078253-168.png||height="372" width="621"]]
493 493  
494 494  
... ... @@ -496,41 +496,41 @@
496 496  
497 497  (% class="box infomessage" %)
498 498  (((
499 - **// sudo journalctl -u draginofwd -f//**
375 +*
376 +** sudo journalctl -u draginofwd -f
500 500  )))
501 501  
502 -[[image:1651746111963-838.png]]
379 +[[image:1651746111963-838.png||height="184" width="730"]]
503 503  
504 504   If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
505 505  
506 -
507 507  [[image:1651746139304-966.png||height="326" width="621"]]
508 508  
385 +=== 5.2.4 Commands to handle service ===
509 509  
510 -===== 5.2.4 Commands to handle service =====
387 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
388 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
389 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
390 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
391 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
511 511  
512 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
513 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
514 -* **Start** dragino_fwd : sudo systemctl start draginofwd
515 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
516 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
393 += 6. Order Info =
517 517  
518 -=== 6. Order Info ===
395 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
519 519  
520 - Part Number: **PG1302-XX**  Or  Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
397 +**~ (% style="color:#0000ff" %)XX:(%%)**
521 521  
522 -**~ XX:**
399 +* (% style="color:#0000ff" %)868 (%%)(For Bands: EU868,IN865)
400 +* (% style="color:#0000ff" %)915 (%%)(For Bands: US915,AU915,AS923,KR920)
401 +* (% style="color:#0000ff" %)470 (%%)(For Band: CN470)
523 523  
524 -* 868 (For Bands: EU868,IN865)
525 -* 915 (For Bands: US915,AU915,AS923,KR920)
526 -* 470 (For Band: CN470)
403 += 7. Packing Info =
527 527  
528 -=== 7. Packing Info ===
529 -
530 530  (((
531 -**~ PG1302 Package Includes**:
406 +**PG1302 Package Includes**:
532 532  )))
533 533  
409 +(((
534 534  * (((
535 535  PG1302 x 1
536 536  )))
... ... @@ -537,9 +537,10 @@
537 537  * (((
538 538  LoRa Antenna x 1
539 539  )))
416 +)))
540 540  
541 541  (((
542 -**~ PG1302-PI Package Includes**:
419 +**PG1302-PI Package Includes**:
543 543  )))
544 544  
545 545  * (((
... ... @@ -551,6 +551,23 @@
551 551  * (((
552 552  RPi3/4 converter PCB
553 553  )))
431 +
432 +(((
554 554  * (((
555 555  Screws to hole converter PCB on RPI.
556 556  )))
436 +
437 += 8. Support =
438 +
439 +(((
440 +If you are experiencing issues and can’t solve, you can send mail to
441 +)))
442 +
443 +(((
444 +[[support@dragino.com>>mailto:support@dragino.com]]
445 +)))
446 +
447 +(((
448 +With your question as detail as possible. We will reply and help you in the shortest.
449 +)))
450 +)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0