Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 98.5 >
edited by Xiaoling
on 2022/05/07 11:54
To version < 98.24 >
edited by Xiaoling
on 2022/05/14 15:40
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,70 +3,38 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 4  [[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 12  **PG1302 LoRaWAN Concentrator User Manual**
13 13  
14 14  
15 15  
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
18 += 1. Introduction =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
20 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
31 31  
32 32  (((
33 -(((
34 -(((
35 -(((
36 36  The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
37 37  )))
38 -)))
39 -)))
40 40  
41 41  (((
42 -(((
43 -(((
44 44  The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
45 45  )))
46 -)))
47 -)))
48 -)))
49 49  
50 50  (((
51 -(((
52 -(((
53 -(((
54 54  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
55 55  )))
56 -)))
57 -)))
58 -)))
59 59  
60 -(((
61 -(((
62 -
63 -)))
64 -)))
34 +== 1.2 Features ==
65 65  
66 -==== 1.2 Features ====
67 -
68 68  * Base on Semtech SX1302 solution
69 69  * Support Raspberry Pi 3B/3B+/4
70 70  * Up to -140dBm sensitivity
... ... @@ -72,40 +72,28 @@
72 72  * Mini-PCIe Interface
73 73  * Converter board to support Raspberry Pi
74 74  
75 -==== 1.3 General Interfaces ====
43 +== 1.3 General Interfaces ==
76 76  
77 77  * SPI interface for LoRa
78 78  * Power Input: 5v, 1A
79 79  * 1 x I-PEX for LoRa
80 80  
81 -==== 1.4 Pin Mapping ====
49 +== 1.4 Pin Mapping ==
82 82  
83 83   [[image:1651743282627-547.png||height="402" width="425"]]
84 84  
53 +== 1.5 LEDs ==
85 85  
86 -
87 -==== 1.5 LEDs ====
88 -
89 -(((
90 90   TX: Blink when transmit a packet
91 -)))
92 -
93 -(((
94 94   RX: Blink when receive a packet
95 -)))
96 -
97 -(((
98 98   Config: Always ON
99 -)))
100 100  
59 +== 1.6 Power Consumption ==
101 101  
102 -==== 1.6 Power Consumption ====
103 -
104 104   TBD
105 105  
63 +== 1.7 Applications ==
106 106  
107 -==== 1.7 Applications ====
108 -
109 109  * Smart Buildings & Home Automation
110 110  * Logistics and Supply Chain Management
111 111  * Smart Metering
... ... @@ -113,50 +113,38 @@
113 113  * Smart Cities
114 114  * Smart Factory
115 115  
116 -=== 2. Example: Set up as LoRaWAN gateway. ===
72 += 2. Example: Set up as LoRaWAN gateway. =
117 117  
118 -==== 2.1 System structure ====
74 +== 2.1 System structure ==
119 119  
120 -(((
121 121  This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
122 -)))
123 123  
124 124  [[image:1651743698677-436.png||height="457" width="686"]]
125 125  
80 +== 2.2 Hardware Installation ==
126 126  
82 +**Important Notice: **Please power the RPI with 5V,3A cable.
127 127  
128 -==== 2.2 Hardware Installation ====
129 -
130 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
131 -
132 132  [[image:1651743803032-803.png]]
133 133  
86 += 3. Install the software? =
134 134  
88 +There are two ways to install software in RPi4 to use PG1302.
135 135  
136 -=== 3. Install the software? ===
137 -
138 - There are two ways to install software in RPi4 to use PG1302.
139 -
140 140  * Flash SD card with Dragino pre-build image which support Web UI.
141 141  * Install lora packet forwarder in existing RPi OS.
142 142  
143 -=== 4. Flash with pre-build image ===
93 += 4. Flash with pre-build image =
144 144  
145 -==== 4.1 Download the dragino image for RPI ====
95 +== 4.1 Download the dragino image for RPI ==
146 146  
147 -(((
148 - Download PG1302_for_Rpi4_64_with_webui from
149 -)))
97 +Download PG1302_for_Rpi4_64_with_webui from
98 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
150 150  
151 -(((
152 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
153 -)))
100 +== 4.2 Flash the image to SD card ==
154 154  
102 +Flash the image to SD card:
155 155  
156 -==== 4.2 Flash the image to SD card ====
157 -
158 - Flash the image to SD card:
159 -
160 160  [[image:1651744119133-233.png||height="373" width="621"]]
161 161  
162 162   Note: Download the flash tool following this link
... ... @@ -163,18 +163,14 @@
163 163  
164 164   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
165 165  
110 +== 4.3 Access the Linux console ==
166 166  
167 -==== 4.3 Access the Linux console ====
112 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
168 168  
169 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
170 -
171 -Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
172 -
173 173  [[image:1651744193675-591.png||height="450" width="466"]]
174 174  
116 +The account details for Web Login are:
175 175  
176 - The account details for Web Login are:
177 -
178 178  **~ User Name: root**
179 179  
180 180  **~ Password:   dragino**
... ... @@ -184,128 +184,89 @@
184 184  
185 185  **~ Pi/dragino**
186 186  
127 +After log in, you will be in the Linux console and type command here.
187 187  
188 - After log in, you will be in the Linux console and type command here.
189 -
190 190  [[image:1651744358515-107.png||height="366" width="581"]]
191 191  
131 +== 4.4 Access the WebUI of RPi4. ==
192 192  
193 -==== 4.4 Access the WebUI of RPi4. ====
133 +=== 4.4.1 Home page ===
194 194  
195 -===== 4.4.1 Home page =====
196 -
197 -(((
198 -Open a browser on the PC and type the RPI ip address
199 -)))
200 -
201 -(((
202 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
203 -)))
204 -
205 -(((
135 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
206 206  You will see the login interface of RPI as shown below.
207 -)))
208 -
209 -(((
210 210  The account details for Web Login are:
211 -)))
212 212  
213 213  (((
214 214  **~ User Name: root**
215 -)))
216 -
217 -(((
218 218  **~ Password:   dragino**
219 219  )))
220 220  
221 -(% style="text-align:center" %)
222 222  [[image:1651744457761-993.png||height="352" width="621"]]
223 223  
146 +=== 4.4.2 LoRa Page ===
224 224  
225 -===== 4.4.2 LoRa Page =====
148 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
226 226  
227 -(((
228 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN
229 -)))
230 -
231 -(((
232 - protocol, and user can customize the band* as well.
233 -)))
234 -
235 -(% style="text-align:center" %)
236 236  [[image:1651744554845-970.png||height="328" width="621"]]
237 237  
238 - Different PG1302 hardware version can support different frequency range:
152 +Different PG1302 hardware version can support different frequency range:
239 239  
240 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
154 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
241 241  
242 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
156 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
243 243  
244 - After user choose the frequency plan, he can see the actually frequency in used by checking the
158 +After user choose the frequency plan, he can see the actually frequency in used by checking the
245 245  
246 - page LogRead ~-~-> LoRa Log
160 +page LogRead ~-~-> LoRa Log
247 247  
248 - Note *: See this instruction for how to customize frequency band
162 +Note *: See this instruction for how to customize frequency band
249 249  
250 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
164 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
251 251  
166 +=== 4.4.3 LoRaWAN Page ===
252 252  
253 -===== 4.4.3 LoRaWAN Page =====
168 +==== 4.4.3.1 Semtech UDP ====
254 254  
255 -====== 4.4.3.1 Semtech UDP ======
256 -
257 -
258 -(% style="text-align:center" %)
259 259  [[image:1651744767914-283.png||height="352" width="621"]]
260 260  
261 - Note *: See this instruction for how to configure TTN.
172 +Note *: See this instruction for how to configure TTN.
262 262  
263 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
174 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
264 264  
176 +==== 4.4.3.2 Basic Station ====
265 265  
266 -====== 4.4.3.2 Basic Station ======
267 -
268 -(% style="text-align:center" %)
269 269  [[image:1651744890629-683.png||height="380" width="621"]]
270 270  
271 - Note *: See this instruction for how to configure TTN.
180 +Note *: See this instruction for how to configure TTN.
272 272  
273 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
182 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
274 274  
184 +=== 4.4.4 LogRead ===
275 275  
276 -===== 4.4.4 LogRead =====
186 +==== 4.4.4.1 LoRa Log ====
277 277  
278 -====== 4.4.4.1 LoRa Log ======
279 -
280 -(% style="text-align:center" %)
281 281  [[image:1651744955955-452.png||height="571" width="621"]]
282 282  
283 - Show the frequency for LoRa Radio and traffics.
190 +Show the frequency for LoRa Radio and traffics.
284 284  
192 +==== 4.4.4.2 System Log ====
285 285  
286 -====== 4.4.4.2 System Log ======
194 +Show system log.
287 287  
288 - Show system log.
289 -
290 -(% style="text-align:center" %)
291 291  [[image:1651745003470-264.png||height="477" width="621"]]
292 292  
198 +==== 4.4.4.3 Record Log ====
293 293  
200 +**Record the system log.**
294 294  
295 -====== 4.4.4.3 Record Log ======
296 -
297 -**~ Record the system log.**
298 -
299 -(% style="text-align:center" %)
300 300  [[image:1651745069814-662.png||height="144" width="621"]]
301 301  
204 += 5. Install stand alone LoRa Packet Forwarder. =
302 302  
303 -=== 5. Install stand alone LoRa Packet Forwarder. ===
206 +== 5.1 OS requirement ==
304 304  
305 -==== 5.1 OS requirement ====
208 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
306 306  
307 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
308 -
309 309   pi@raspberrypi:~~$ cat /etc/os-release
310 310  
311 311   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
... ... @@ -326,170 +326,131 @@
326 326  
327 327   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
328 328  
230 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
329 329  
330 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
232 +In RPI, run below command to get a Gateway ID
331 331  
332 - In RPI, run below command to get a Gateway ID
234 +(% class="box infomessage" %)
235 +(((
236 + ifconfig eth0
237 +)))
333 333  
334 - (% class="mark" %)ifconfig eth0
335 -
336 -(% style="text-align:center" %)
337 337  [[image:1651745210205-512.png||height="130" width="621"]]
338 338  
339 339  (((
340 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the
242 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
341 341  )))
342 342  
343 -(((
344 - gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
345 -)))
346 -
347 -(% style="text-align:center" %)
348 348  [[image:1651745267862-321.png||height="526" width="621"]]
349 349  
350 -
351 -
352 -(% style="text-align:center" %)
353 353  [[image:1651745306744-481.png||height="478" width="621"]]
354 354  
355 355  After set up, the status should show not connected as below:
356 356  
357 -(% style="text-align:center" %)
358 358  [[image:1651745366987-458.png||height="363" width="621"]]
359 359  
253 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
360 360  
361 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
255 +Enable SPI and I2C first:
362 362  
363 - Enable SPI and I2C first:
257 +a)SPI needs to be enabled on the Raspberry Pi
364 364  
365 - a)SPI needs to be enabled on the Raspberry Pi
259 +Run sudo raspi-config to open the config window
366 366  
367 - Run sudo raspi-config to open the config window
261 +[[image:1651745476754-240.png||height="234" width="629"]]
368 368  
369 -(% style="text-align:center" %)
370 -[[image:1651745476754-240.png||height="235" width="631"]]
371 -
372 -
373 -(% style="text-align:center" %)
374 374  [[image:image-20220505181135-1.png]]
375 375  
376 -(% style="text-align:center" %)
377 -[[image:image-20220505181135-2.png]]
265 +[[image:image-20220505181135-2.png||height="229" width="622"]]
378 378  
267 +In RPI , Fist: Enter root account:
379 379  
269 +[[image:1651745583363-614.png||height="151" width="732"]]
380 380  
381 381  
382 - In RPI , Fist: Enter root account:
272 +and then run:
383 383  
384 -(% style="text-align:center" %)
385 -[[image:1651745583363-614.png]]
274 +wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
386 386  
276 +chmod +x ./auto_install.sh
387 387  
388 - and then run:
278 +./auto_install.sh
389 389  
390 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
280 +[[image:1651745611629-818.png||height="225" width="729"]]
391 391  
392 - chmod +x ./auto_install.sh
282 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
393 393  
394 - ./auto_install.sh
284 +You can get these output:
395 395  
396 -(% style="text-align:center" %)
397 -[[image:1651745611629-818.png]]
398 -
399 -
400 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
401 -
402 - You can get these output:
403 -
404 -(% style="text-align:center" %)
405 405  [[image:1651745657252-173.png||height="426" width="621"]]
406 406  
288 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
407 407  
408 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
409 -
410 410  (((
411 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the
291 +After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json.**
412 412  )))
413 413  
414 414  (((
415 -**~ gateway_ID** in file **local_conf.json**
295 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
416 416  )))
417 417  
418 -(((
419 - The default LoRaWAN server points to localhost, user need to put the correct server address to the
420 -)))
421 -
422 -(((
423 - server_address field in file **local_conf.json**, like below.
424 -)))
425 -
426 -(% style="text-align:center" %)
427 427  [[image:1651745709709-887.png||height="820" width="621"]]
428 428  
300 +User can find the TTN v3 server address from:
429 429  
430 - User can find the TTN v3 server address from:
302 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
431 431  
432 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
304 +And the default frequency band is US915 in **global_conf.json** file.
433 433  
434 -
435 - And the default frequency band is US915 in **global_conf.json** file.
436 -
437 -(% style="text-align:center" %)
438 438  [[image:1651745838008-820.png||height="650" width="621"]]
439 439  
440 -
441 441  * If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
442 442  
443 - 1).Chose your need the name of region frequency.
310 + 1).Chose your need the name of region frequency.
444 444  
445 -(% style="text-align:center" %)
446 -[[image:1651745867516-322.png]]
312 +[[image:1651745867516-322.png||height="83" width="740"]]
447 447  
448 -
449 449   2). Use this command to copy it.
450 450  
451 451   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
452 452  
453 -(% style="text-align:center" %)
454 -[[image:1651745984006-868.png]]
318 +[[image:1651745984006-868.png||height="87" width="745"]]
455 455  
456 -
457 457  * If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
458 458  
459 -(% class="wikigeneratedid" %)
460 -(((
461 -
462 -)))
322 +=== 5.2.3 Check result ===
463 463  
464 -===== 5.2.3 Check result =====
465 -
466 466  (((
467 - Run below command to restart the dragino_fwd:
325 +Run below command to restart the dragino_fwd:
468 468  )))
469 469  
470 470  (((
471 - sudo systemctl stop draginofwd
329 +(% class="box infomessage" %)
330 +(((
331 +sudo systemctl stop draginofwd
472 472  )))
473 473  
334 +(% class="box infomessage" %)
474 474  (((
475 - sudo systemctl start draginofwd
336 +sudo systemctl start draginofwd
476 476  )))
338 +)))
477 477  
478 478  (((
479 - debug check the ruing status of fwd:
341 +debug check the ruing status of fwd:
480 480  )))
481 481  
482 482  (((
483 - sudo systemctl status draginofwd
345 +(% class="box infomessage" %)
346 +(((
347 +sudo systemctl status draginofwd
484 484  )))
349 +)))
485 485  
486 -(% style="text-align:center" %)
487 -[[image:1651746045057-414.png]]
351 +[[image:1651746045057-414.png||height="193" width="729"]]
488 488  
353 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
489 489  
490 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
491 -
492 -(% style="text-align:center" %)
493 493  [[image:1651746078253-168.png||height="372" width="621"]]
494 494  
495 495  
... ... @@ -500,16 +500,14 @@
500 500   **// sudo journalctl -u draginofwd -f//**
501 501  )))
502 502  
503 -[[image:1651746111963-838.png]]
365 +[[image:1651746111963-838.png||height="188" width="746"]]
504 504  
505 505   If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
506 506  
507 -
508 508  [[image:1651746139304-966.png||height="326" width="621"]]
509 509  
371 +=== 5.2.4 Commands to handle service ===
510 510  
511 -===== 5.2.4 Commands to handle service =====
512 -
513 513  * **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
514 514  * **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
515 515  * **Start** dragino_fwd : sudo systemctl start draginofwd
... ... @@ -518,7 +518,7 @@
518 518  
519 519  === 6. Order Info ===
520 520  
521 - Part Number: **PG1302-XX**  Or  Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
381 +Part Number: **PG1302-XX**  Or  Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
522 522  
523 523  **~ XX:**
524 524  
... ... @@ -529,18 +529,19 @@
529 529  === 7. Packing Info ===
530 530  
531 531  (((
532 -**~ PG1302 Package Includes**:
392 +**PG1302 Package Includes**:
533 533  )))
534 534  
535 -* (((
536 -PG1302 x 1
395 +(((
396 +* PG1302 x 1
537 537  )))
538 -* (((
539 -LoRa Antenna x 1
398 +
399 +(((
400 +* LoRa Antenna x 1
540 540  )))
541 541  
542 542  (((
543 -**~ PG1302-PI Package Includes**:
404 +**PG1302-PI Package Includes**:
544 544  )))
545 545  
546 546  * (((

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0