Skip to Content
Last modified by Kilight Cao on 2024/06/22 10:43
From version 90.1
edited by Xiaoling
on 2022/05/06 16:17
Change comment: There is no comment for this version
To version 125.3
edited by Xiaoling
on 2023/03/30 16:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,135 +3,86 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
10 -
11 -
12 -**PG1302 LoRaWAN Concentrator User Manual**
13 -
14 -
15 -
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
17 += 1. Introduction =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
31 31  
32 -(((
33 -(((
34 -(((
35 - The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several
36 -)))
37 37  
38 38  (((
39 - LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between
23 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
40 40  )))
41 41  
42 42  (((
43 - a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
27 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
44 44  )))
45 -)))
46 46  
47 47  (((
48 -(((
49 -
31 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
50 50  )))
51 -)))
52 -)))
53 53  
54 -(((
55 -(((
56 -(((
57 - The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things
58 -)))
59 59  
60 -(((
61 - applications with up to 5000 nodes per km2 in moderately interfered environment.
62 -)))
63 -)))
35 +== 1.2 Features ==
64 64  
65 -(((
66 -(((
67 -
68 -)))
69 -)))
70 -)))
71 71  
72 -(((
73 -(((
74 -(((
75 - PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the
76 -)))
77 -
78 -(((
79 - module by Web UI. Or install the raw lorawan driver in the exist OS.
80 -)))
81 -)))
82 -)))
83 -
84 -(((
85 -(((
86 -
87 -)))
88 -)))
89 -
90 -==== 1.2 Features ====
91 -
92 92  * Base on Semtech SX1302 solution
93 -* Support Raspberry Pi 3B/3B+/4
39 +* Support Raspberry Pi 3B/3B+/4, TinkerBoard2/2S, Orange Pi Pc/PC PLUS.
94 94  * Up to -140dBm sensitivity
95 95  * Support 3.3v and 5v.
96 96  * Mini-PCIe Interface
97 97  * Converter board to support Raspberry Pi
98 98  
99 -==== 1.3 General Interfaces ====
100 100  
46 +
47 +== 1.3 General Interfaces for PG1302 ==
48 +
49 +
101 101  * SPI interface for LoRa
102 102  * Power Input: 5v, 1A
103 103  * 1 x I-PEX for LoRa
53 +* Working Temperature: -40 ℃ ~~ 80℃
104 104  
105 -==== 1.4 Pin Mapping ====
106 106  
56 +
57 +== 1.4 Pin Mapping ==
58 +
59 +
107 107   [[image:1651743282627-547.png||height="402" width="425"]]
108 108  
109 109  
63 +== 1.5 LEDs ==
110 110  
111 -==== 1.5 LEDs ====
112 112  
113 113  (((
114 - TX: Blink when transmit a packet
67 +TX: Blink when transmit a packet
68 +RX: Blink when receive a packet
69 +Config: Always ON
115 115  )))
116 116  
117 -(((
118 - RX: Blink when receive a packet
119 -)))
120 120  
121 -(((
122 - Config: Always ON
123 -)))
73 +== 1.6 Power Consumption ==
124 124  
125 125  
126 -==== 1.6 Power Consumption ====
76 +<300mA @ 3.3v.
127 127  
128 - TBD
78 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
129 129  
130 130  
131 -==== 1.7 Applications ====
81 +== 1.7 Applications ==
132 132  
83 +
133 133  * Smart Buildings & Home Automation
134 134  * Logistics and Supply Chain Management
135 135  * Smart Metering
... ... @@ -137,425 +137,606 @@
137 137  * Smart Cities
138 138  * Smart Factory
139 139  
140 -=== 2. Example: Set up as LoRaWAN gateway. ===
141 141  
142 -==== 2.1 System structure ====
143 143  
144 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
93 += 2. Example: Set up as LoRaWAN gateway =
145 145  
146 - Set up method for other server are similar.
95 +== 2.1 System structure ==
147 147  
148 -(% style="text-align:center" %)
97 +
98 +(((
99 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
100 +
101 +
102 +)))
103 +
149 149  [[image:1651743698677-436.png||height="457" width="686"]]
150 150  
151 151  
107 +== 2.2 Hardware Installation ==
152 152  
153 -==== 2.2 Hardware Installation ====
154 154  
155 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
110 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
156 156  
157 -(% style="text-align:center" %)
158 -[[image:1651743803032-803.png]]
112 +[[image:image-20220621104746-1.png||height="381" width="451"]]
159 159  
160 160  
115 += 3. Install the software? =
161 161  
162 -=== 3. Install the software? ===
163 163  
164 - There are two ways to install software in RPi4 to use PG1302.
118 +**Raspberry Pi 3B/3B+/4,**
165 165  
166 -* Flash SD card with Dragino pre-build image which support Web UI.
167 -* Install lora packet forwarder in existing RPi OS.
120 +* Flash SD card with Dragino pre-build image which supports Web UI.
121 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in existing RPi OS.
168 168  
169 -=== 4. Flash with pre-build image ===
123 +**TinkerBoard2/2S, **
170 170  
171 -==== 4.1 Download the dragino image for RPI ====
125 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
172 172  
173 - Download PG1302_for_Rpi4_64_with_webui from
127 +**Orange Pi PC/PC PLUS.**
174 174  
175 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
129 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
176 176  
177 177  
178 -==== 4.2 Flash the image to SD card ====
179 179  
180 - Flash the image to SD card:
133 += 4. Flash with pre-build image =
181 181  
182 -(% style="text-align:center" %)
135 +== 4.1 Download the dragino image for RPI ==
136 +
137 +
138 +(((
139 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
140 +)))
141 +
142 +
143 +== 4.2 Flash the image to an SD card ==
144 +
145 +
146 +Flash the image to the SD card:
147 +
183 183  [[image:1651744119133-233.png||height="373" width="621"]]
184 184  
185 - Note: Download the flash tool following this link
186 186  
187 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
151 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
188 188  
189 189  
190 -==== 4.3 Access the Linux console ====
154 +== 4.3 Access the Linux console ==
191 191  
156 +
192 192  (((
158 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
159 +)))
160 +
161 +
162 +[[image:1651744193675-591.png||height="450" width="466"]]
163 +
164 +The account details for Web Login are:
165 +
193 193  (((
194 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s
167 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
168 +)))
195 195  
196 - management portal, you should be able to find what IP address the router has assigned to the RPI. You can
170 +(((
171 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
172 +)))
197 197  
198 - use this IP to connect the WEB UI or SSH access of RPI.
174 +(((
175 +
199 199  )))
200 200  
201 201  (((
202 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it.
179 +**~ (% style="color:#0000ff" %)Backup account(%%)**
180 +)))
203 203  
204 - Below are screenshots
182 +(((
183 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
184 +
185 +
205 205  )))
187 +
188 +After logging in, you will be in the Linux console and type the command here.
189 +
190 +[[image:1651744358515-107.png||height="366" width="581"]]
191 +
192 +
193 +== 4.4 Access the WebUI of RPi4 ==
194 +
195 +=== 4.4.1 Home page ===
196 +
197 +
198 +(((
199 +Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
200 +You will see the login interface of RPI as shown below.
201 +The account details for Web Login are:
206 206  )))
207 207  
204 +(((
205 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
206 +(% style="color:#0000ff" %)** Password:   dragino**
208 208  
209 -(% style="text-align:center" %)
210 -[[image:1651744193675-591.png||height="450" width="466"]]
208 +
209 +)))
211 211  
211 +[[image:1651744457761-993.png||height="352" width="621"]]
212 212  
213 - The account details for Web Login are:
214 214  
215 -**~ User Name: root**
214 +=== 4.4.2 LoRa Page ===
216 216  
217 -**~ Password:   dragino**
218 218  
217 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
219 219  
220 -**~ Backup account**
221 221  
222 -**~ Pi/dragino**
220 +[[image:1651744554845-970.png||height="328" width="621"]]
223 223  
224 224  
225 - After log in, you will be in the Linux console and type command here.
223 +Different PG1302 hardware version can support different frequency range:
226 226  
227 -(% style="text-align:center" %)
228 -[[image:1651744358515-107.png||height="366" width="581"]]
225 +* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
226 +* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
229 229  
228 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
230 230  
231 -==== 4.4 Access the WebUI of RPi4. ====
230 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
232 232  
233 -===== 4.4.1 Home page =====
234 234  
235 - Open a browser on the PC and type the RPI ip address
233 +=== 4.4.3 LoRaWAN Page ===
236 236  
237 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
235 +==== 4.4.3.1 Semtech UDP ====
238 238  
239 - You will see the login interface of RPI as shown below.
240 240  
241 - The account details for Web Login are:
238 +[[image:1651744767914-283.png||height="352" width="621"]]
242 242  
243 -**~ User Name: root**
244 244  
245 -**~ Password:   dragino**
241 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
246 246  
247 -(% style="text-align:center" %)
248 -[[image:1651744457761-993.png||height="352" width="621"]]
249 249  
244 +==== 4.4.3.2 Basic Station ====
250 250  
251 -===== 4.4.2 LoRa Page =====
252 252  
253 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN
247 +[[image:1651744890629-683.png||height="380" width="621"]]
254 254  
255 - protocol, and user can customize the band* as well.
256 256  
257 -(% style="text-align:center" %)
258 -[[image:1651744554845-970.png||height="328" width="621"]]
250 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
259 259  
260 - Different PG1302 hardware version can support different frequency range:
261 261  
262 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
253 +=== 4.4.4 LogRead ===
263 263  
264 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
255 +==== 4.4.4.1 LoRa Log ====
265 265  
266 - After user choose the frequency plan, he can see the actually frequency in used by checking the
267 267  
268 - page LogRead ~-~-> LoRa Log
258 +[[image:1651744955955-452.png||height="571" width="621"]]
269 269  
270 - Note *: See this instruction for how to customize frequency band
271 271  
272 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
261 +Show the frequency for LoRa Radio and traffics.
273 273  
274 274  
275 -===== 4.4.3 LoRaWAN Page =====
264 +==== 4.4.4.2 System Log ====
276 276  
277 -====== 4.4.3.1 Semtech UDP ======
278 278  
267 +Show system log.
279 279  
280 -(% style="text-align:center" %)
281 -[[image:1651744767914-283.png||height="352" width="621"]]
269 +[[image:1651745003470-264.png||height="477" width="621"]]
282 282  
283 - Note *: See this instruction for how to configure TTN.
284 284  
285 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
272 +==== 4.4.4.3 Record Log ====
286 286  
287 287  
288 -====== 4.4.3.2 Basic Station ======
275 +**Record the system log.**
289 289  
290 -(% style="text-align:center" %)
291 -[[image:1651744890629-683.png||height="380" width="621"]]
277 +[[image:1651745069814-662.png||height="144" width="621"]]
292 292  
293 - Note *: See this instruction for how to configure TTN.
294 294  
295 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
280 += 5. Install stand-alone LoRa Packet Forwarder =
296 296  
282 +== 5.1 Choose the right installation package for your OS ==
297 297  
298 -===== 4.4.4 LogRead =====
299 299  
300 -====== 4.4.4.1 LoRa Log ======
285 +(((
286 +**draginofwd-32bit (RPI, Orange PI)**
301 301  
302 -(% style="text-align:center" %)
303 -[[image:1651744955955-452.png||height="571" width="621"]]
288 +**Download URL:** https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb
304 304  
305 - Show the frequency for LoRa Radio and traffics.
290 +**Linux Command:** wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
306 306  
307 307  
308 -====== 4.4.4.2 System Log ======
293 +**dragino-64bit (RPI, Orange PI)**
309 309  
310 - Show system log.
295 +**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb
296 +)))
311 311  
312 -(% style="text-align:center" %)
313 -[[image:1651745003470-264.png||height="477" width="621"]]
298 +**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
314 314  
315 315  
301 +**dragino-tiker-32bit (Tinker Board)**
316 316  
317 -====== 4.4.4.3 Record Log ======
303 +**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb
318 318  
319 -**~ Record the system log.**
305 +**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
320 320  
321 -(% style="text-align:center" %)
322 -[[image:1651745069814-662.png||height="144" width="621"]]
323 323  
308 +**Install details:**
324 324  
325 -=== 5. Install stand alone LoRa Packet Forwarder. ===
310 +[[image:image-20220928181226-1.png||height="218" width="1100"]]
326 326  
327 -==== 5.1 OS requirement ====
328 328  
329 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
313 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
330 330  
315 +(% class="box" %)
316 +(((
331 331   pi@raspberrypi:~~$ cat /etc/os-release
332 -
333 333   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
334 -
335 335   NAME="Raspbian GNU/Linux"
336 -
337 337   VERSION_ID="8"
338 -
339 339   VERSION="8 (jessie)"
340 -
341 341   ID=raspbian
342 -
343 343   ID_LIKE=debian
344 -
345 345   HOME_URL="http:~/~/www.raspbian.org/"
346 -
347 347   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
348 -
349 349   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
350 350  
328 +
329 +)))
351 351  
352 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
353 353  
354 - In RPI, run below command to get a Gateway ID
332 +== 5.2 Select the mode of connection to the server ==
355 355  
356 - (% class="mark" %)ifconfig eth0
357 357  
358 -(% style="text-align:center" %)
335 +The Dragino LoRa Packet Forware supports the Semtech UDP and Basic Station mode.
336 +
337 +The User can choose one of the methods as the connection mode.
338 +
339 +
340 +**~1. Semtech UDP Mode  ~-~-> 5.2.1**
341 +
342 +**2. Basic Station Mode  ~-~-> 5.2.2**
343 +
344 +
345 +=== 5.2.1 Semtech UDP Mode ===
346 +
347 +
348 +==== **a). Get a gateway EUI from the device ETH MAC.** ====
349 +
350 +
351 +In RPI, run the below command to get a Gateway ID
352 +
353 +(% class="box infomessage" %)
354 +(((
355 +**~ ifconfig eth0**
356 +)))
357 +
359 359  [[image:1651745210205-512.png||height="130" width="621"]]
360 360  
361 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.
362 362  
363 - Input this to TTN v3. Make sure to select legacy packet forwarder.
361 +(((
362 +(((
363 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
364 364  
365 -(% style="text-align:center" %)
366 -[[image:1651745267862-321.png||height="526" width="621"]]
367 367  
368 368  
367 +==== **b). Input this Gateway EUI to the TTN-Stack** ====
369 369  
370 -(% style="text-align:center" %)
369 +
370 +)))
371 +)))
372 +
373 +[[image:1651745267862-321.png||height="526" width="621"]]
374 +
371 371  [[image:1651745306744-481.png||height="478" width="621"]]
372 372  
373 -After set up, the status should show not connected as below:
374 374  
375 -(% style="text-align:center" %)
378 +
379 +==== **c). After Register, the status should show not connected as below:** ====
380 +
381 +
376 376  [[image:1651745366987-458.png||height="363" width="621"]]
377 377  
378 378  
379 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
380 380  
381 - Enable SPI and I2C first:
386 +==== **d). Enable SPI and I2C on your device** ====
382 382  
383 - a)SPI needs to be enabled on the Raspberry Pi
384 384  
385 - Run sudo raspi-config to open the config window
389 +**the below example is using Raspberry 4B.**
386 386  
387 -(% style="text-align:center" %)
388 -[[image:1651745476754-240.png||height="235" width="631"]]
389 389  
392 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
390 390  
391 -(% style="text-align:center" %)
394 +[[image:1651745476754-240.png||height="234" width="629"]]
395 +
396 +
392 392  [[image:image-20220505181135-1.png]]
393 393  
394 -(% style="text-align:center" %)
395 -[[image:image-20220505181135-2.png]]
396 396  
400 +[[image:image-20220505181135-2.png||height="229" width="622"]]
397 397  
398 398  
399 399  
400 - In RPI , Fist: Enter root account:
404 +==== **e). Access the root account:** ====
401 401  
402 -(% style="text-align:center" %)
403 -[[image:1651745583363-614.png]]
406 +(((
407 +[[image:1651745583363-614.png||height="151" width="732"]]
404 404  
405 405  
406 - and then run:
410 +
411 +)))
407 407  
408 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
413 +==== **f). Modify the configuration of FWD** ====
409 409  
410 - chmod +x ./auto_install.sh
411 411  
412 - ./auto_install.sh
416 +(((
417 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
418 +)))
413 413  
414 -(% style="text-align:center" %)
415 -[[image:1651745611629-818.png]]
420 +(((
421 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
416 416  
417 417  
418 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
424 +the User can find the lora configuration directory in (% style="color:#0000ff" %)**/etc/lora/**(%%) there are the cfg-302 directory and the global_conf.json, and local_conf.json files.
419 419  
420 - You can get these output:
426 +/etc/lora/
427 +├── cfg-302  ~-~--> global configuration file
428 +├── devskey  ~-~--> Database
429 +├── global_conf.json  ~-~--> Frequency plan for current applications
430 +└── local_conf.json  ~-~--> Local fwd configuration
421 421  
422 -(% style="text-align:center" %)
423 -[[image:1651745657252-173.png||height="426" width="621"]]
432 +At default, the users need to change two configurations file: global_conf.json and local_conf.json.
424 424  
425 425  
426 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
435 +===== **1.) Configure gateway EUI and server address, port for fwd** =====
427 427  
437 +
438 +)))
439 +
440 +[[image:1651745709709-887.png||height="820" width="621"]]
441 +
442 +
443 +**Note: Users can find the TTN v3 server address from [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]**
444 +
445 +
446 +===== **2). Override the global_conf.json file by selecting the appropriate frequency plan for your region in cfg-302** =====
447 +
448 +
449 +the default frequency band is US915 in the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
450 +
451 +[[image:1651745838008-820.png||height="650" width="621"]]
452 +
453 +
454 +If the user wants to change to other frequency bands, the User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
455 +
456 +**//eg: cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json //**
457 +
458 +
459 +
460 +====== **Selecting the appropriate frequency plan for your region in cfg-302.** ======
461 +
462 +[[image:1651745867516-322.png||height="83" width="740"]]
463 +
464 +
465 +====== **Override the global_conf.json** ======
466 +
467 +(% class="box infomessage" %)
428 428  (((
429 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the
469 +**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
430 430  )))
431 431  
472 +[[image:1651745984006-868.png||height="87" width="745"]]
473 +
474 +
475 +==== (% style="color:inherit; font-family:inherit; font-size:23px" %)**g). Running the Fwd Server**(%%) ====
476 +
477 +
432 432  (((
433 -**~ gateway_ID** in file **local_conf.json**
479 +Run the below command to restart the dragino_fwd:
434 434  )))
435 435  
436 436  (((
437 - The default LoRaWAN server points to localhost, user need to put the correct server address to the
483 +(% class="box infomessage" %)
484 +(((
485 +**sudo systemctl start draginofwd**
438 438  )))
487 +)))
439 439  
440 440  (((
441 - server_address field in file **local_conf.json**, like below.
490 +debug check the ruing status of fwd:
442 442  )))
443 443  
444 -(% style="text-align:center" %)
445 -[[image:1651745709709-887.png||height="820" width="621"]]
493 +(((
494 +(% class="box infomessage" %)
495 +(((
496 +**sudo systemctl status draginofwd**
497 +)))
498 +)))
446 446  
500 +[[image:1651746045057-414.png||height="193" width="729"]]
447 447  
448 - User can find the TTN v3 server address from:
449 449  
450 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
503 +Wait for a few minutes, the gateway will be online/active on the TTN-Stack.
451 451  
505 +[[image:1651746078253-168.png||height="372" width="621"]]
452 452  
453 - And the default frequency band is US915 in **global_conf.json** file.
454 454  
455 -(% style="text-align:center" %)
456 -[[image:1651745838008-820.png||height="650" width="621"]]
457 457  
509 +Get the draginofwd real-time running log:
458 458  
459 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
511 +(% class="box infomessage" %)
512 +(((
513 +**~ sudo journalctl -u draginofwd -f**
514 +)))
460 460  
461 - 1).Chose your need the name of region frequency.
516 +[[image:1651746111963-838.png||height="184" width="730"]]
462 462  
463 -(% style="text-align:center" %)
464 -[[image:1651745867516-322.png]]
465 465  
466 466  
467 - 2). Use this command to copy it.
520 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
468 468  
469 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
522 +[[image:1651746139304-966.png||height="326" width="621"]]
470 470  
471 -(% style="text-align:center" %)
472 -[[image:1651745984006-868.png]]
473 473  
525 +==== **h). Commands to handle service** ====
474 474  
475 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
527 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
528 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
529 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
530 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
531 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
476 476  
477 -(% class="wikigeneratedid" %)
533 +
534 +
535 +=== 5.2.2 Basic Station Mode. ===
536 +
537 +
538 +==== **a). Get a gateway EUI from the device ETH MAC.** ====
539 +
540 +
541 +In RPI, run the below command to get a Gateway EUI
542 +
543 +(% class="box infomessage" %)
478 478  (((
479 -
545 +**~ ifconfig eth0**
480 480  )))
481 481  
482 -===== 5.2.3 Check result =====
548 +[[image:1651745210205-512.png||height="130" width="621"]]
483 483  
484 - Run below command to restart the dragino_fwd:
485 485  
486 - sudo systemctl stop draginofwd
551 +(((
552 +(((
553 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
554 +)))
555 +)))
487 487  
488 - sudo systemctl start draginofwd
489 489  
490 - debug check the ruing status of fwd:
491 491  
492 - sudo systemctl status draginofwd
559 +==== **b). Register the gateway with the Basic Station Mode on the TTN-Stack** ====
493 493  
494 -(% style="text-align:center" %)
495 -[[image:1651746045057-414.png]]
496 496  
562 +[[image:image-20230329164417-5.png]]
497 497  
498 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
499 499  
500 -(% style="text-align:center" %)
501 -[[image:1651746078253-168.png||height="372" width="621"]]
502 502  
566 +==== **c). Download the gateway API keys, and then upload them to the gateway.** ====
503 503  
504 - We can check dragino_fwd running states in RPi by running:
505 505  
506 - //**sudo journalctl -u draginofwd -f**//
569 +[[image:image-20230329164704-6.png]]
507 507  
508 -(% style="text-align:center" %)
509 -[[image:1651746111963-838.png]]
510 510  
511 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
572 +==== **d). The status Shows disconnect.** ====
512 512  
513 -(% style="text-align:center" %)
514 -[[image:1651746139304-966.png||height="326" width="621"]]
515 515  
575 +[[image:image-20230329165619-7.png||height="568" width="948"]]
516 516  
517 -===== 5.2.4 Commands to handle service =====
518 518  
519 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
520 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
521 -* **Start** dragino_fwd : sudo systemctl start draginofwd
522 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
523 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
578 +==== **e.) Uploda API keys into the gateway** ====
524 524  
525 -=== 6. Order Info ===
526 526  
527 - Part Number: **PG1302-XX**  Or  Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
581 +the User can find the Basic Station configuration directory in (% style="color:#0000ff" %)**/etc/station/**(%%) there is the station.conf files, and ttnstack directory.
528 528  
529 -**~ XX:**
583 +//**directory tree:**//
530 530  
531 -* 868 (For Bands: EU868,IN865)
532 -* 915 (For Bands: US915,AU915,AS923,KR920)
533 -* 470 (For Band: CN470)
585 +///etc/station/
586 +├── station.conf 
587 +└── ttnstack  ~-~--> ** ttnstack configuration file directory**
588 + ├── cups.trust  ~-~-->  ttnstack auth file
589 + ├── cups.uri  ~-~-->  ttnstack server URI file
590 + └── station.conf  ~-~-~-~-> backup configuration file//
534 534  
535 -=== 7. Packing Info ===
536 536  
537 -**~ PG1302 Package Includes**:
538 538  
594 +**and then upload the downloaded keys to this directory((% style="color:#0000ff" %)/etc/station/(%%))**
595 +
596 +eg:
597 +
598 +/etc/station/
599 +├── cups.key  ~-~--> uploaded by you
600 +├── lns.key  ~-~--> uploaded by you
601 +├── station.conf
602 +
603 +
604 +==== **f). Configure gateway EUI and server address** ====
605 +
606 +
607 +[[image:image-20230329195650-10.png]]
608 +
609 +
610 +After the user enters the correct parameters, the server will be run automatically
611 +
612 +
613 +Tree Directory:
614 +
615 +/etc/station/
616 +├── cups.key
617 +├── cups.trust
618 +├── cups.uri
619 +├── lns.key
620 +├── start-configure.sh
621 +├── station.conf
622 +└── ttnstack
623 + ├── cups.trust
624 + ├── cups.uri
625 + └── station.conf
626 +
627 +
628 +==== **g). Check station running log** ====
629 +
630 +
631 +tail -f /var/log/station.log
632 +
633 +
634 +[[image:image-20230329201624-11.png]]
635 +
636 +
637 += 6. Order Info =
638 +
639 +
640 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
641 +
642 +**~ (% style="color:#0000ff" %)XX:(%%)**
643 +
644 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
645 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
646 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
647 +
648 +
649 +
650 += 7. Packing Info =
651 +
652 +
653 +(((
654 +**PG1302 Package Includes**:
655 +)))
656 +
657 +(((
539 539  * PG1302 x 1
540 540  * LoRa Antenna x 1
660 +)))
541 541  
542 -**~ PG1302-PI Package Includes**:
543 543  
663 +(((
664 +**PG1302-PI Package Includes**:
665 +)))
666 +
544 544  * PG1302 x 1
545 545  * LoRa Antenna x 1
546 546  * RPi3/4 converter PCB
547 547  * Screws to hole converter PCB on RPI.
548 548  
549 -=== 8. Reference ===
550 550  
551 -* Datasheet, User Manual & Software Download:
673 +**PG1302-PI Dimension and weight: **
552 552  
553 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
675 +* Device Size: 18 x 8 x 4 cm
676 +* Weight: 150g
554 554  
555 555  
556 -=== 9. Support ===
557 557  
558 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
559 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
680 += 8. Support =
560 560  
561 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
682 +
683 +(((
684 +If you are experiencing issues and can't solve, you can send mail to
685 +)))
686 +
687 +(((
688 +[[support@dragino.com>>mailto:support@dragino.com]]
689 +)))
690 +
691 +(((
692 +With your question as detail as possible. We will reply and help you in the shortest.
693 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230329164417-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.4 KB
Content
image-20230329164704-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +16.6 KB
Content
image-20230329165619-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +106.9 KB
Content
image-20230329195416-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230329195442-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +9.9 KB
Content
image-20230329195650-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +27.7 KB
Content
image-20230329201624-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.1 KB
Content