Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -175,15 +175,17 @@
175	175
176	176	(((
177	177	(((
178		- Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be
179		-)))
	178	+ Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s
180	180
181		-(((
182		- able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
	180	+ management portal, you should be able to find what IP address the router has assigned to the RPI. You can
	181	+
	182	+ use this IP to connect the WEB UI or SSH access of RPI.
183	183	)))
184	184
185	185	(((
186		- Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
	186	+ Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it.
	187	+
	188	+ Below are screenshots
187	187	)))
188	188	)))
189	189
...	...	@@ -232,12 +232,13 @@
232	232
233	233	===== 4.4.2 LoRa Page =====
234	234
235		- This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
	237	+ This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN
236	236
	239	+ protocol, and user can customize the band* as well.
	240	+
237	237	(% style="text-align:center" %)
238	238	[[image:1651744554845-970.png||height="328" width="621"]]
239	239
240		-
241	241	Different PG1302 hardware version can support different frequency range:
242	242
243	243	➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
...	...	@@ -244,7 +244,6 @@
244	244
245	245	➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
246	246
247		-
248	248	After user choose the frequency plan, he can see the actually frequency in used by checking the
249	249
250	250	page LogRead ~-~-> LoRa Log
...	...	@@ -340,11 +340,10 @@
340	340	(% style="text-align:center" %)
341	341	[[image:1651745210205-512.png||height="130" width="621"]]
342	342
	345	+ We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.
343	343
344		- We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
	347	+ Input this to TTN v3. Make sure to select legacy packet forwarder.
345	345
346		- Make sure to select legacy packet forwarder.
347		-
348	348	(% style="text-align:center" %)
349	349	[[image:1651745267862-321.png||height="526" width="621"]]
350	350
...	...	@@ -408,10 +408,22 @@
408	408
409	409	===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
410	410
411		- After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
	412	+(((
	413	+ After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the
	414	+)))
412	412
413		- The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
	416	+(((
	417	+**~ gateway_ID** in file **local_conf.json**
	418	+)))
414	414
	420	+(((
	421	+ The default LoRaWAN server points to localhost, user need to put the correct server address to the
	422	+)))
	423	+
	424	+(((
	425	+ server_address field in file **local_conf.json**, like below.
	426	+)))
	427	+
415	415	(% style="text-align:center" %)
416	416	[[image:1651745709709-887.png||height="820" width="621"]]
417	417