Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 87.1 >
edited by Xiaoling
on 2022/05/06 15:56
To version < 108.2 >
edited by Xiaoling
on 2022/07/04 16:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,84 +3,33 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
10 -
11 -
12 -**PG1302 LoRaWAN Concentrator User Manual**
13 -
14 -
15 -
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
17 += **1. Introduction** =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 +== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
31 31  
32 -(((
33 -(((
34 - The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on
35 -)))
36 36  
37 -(((
38 - random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a
39 -)))
22 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
40 40  
41 -(((
42 - very wide range of distances.
43 -)))
24 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
44 44  
45 -(((
46 -
47 -)))
48 -)))
26 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
49 49  
50 -(((
51 -(((
52 - The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately
53 -)))
54 54  
55 -(((
56 - interfered environment.
57 -)))
29 +== **1.2 Features** ==
58 58  
59 -(((
60 -
61 -)))
62 -)))
63 -
64 -(((
65 -(((
66 - PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver
67 -)))
68 -
69 -(((
70 - in the exist OS.
71 -)))
72 -)))
73 -
74 -(((
75 -(((
76 -
77 -)))
78 -)))
79 -
80 -==== 1.2 Features ====
81 -
82 82  * Base on Semtech SX1302 solution
83 83  * Support Raspberry Pi 3B/3B+/4
84 84  * Up to -140dBm sensitivity
... ... @@ -86,34 +86,32 @@
86 86  * Mini-PCIe Interface
87 87  * Converter board to support Raspberry Pi
88 88  
89 -==== 1.3 General Interfaces ====
38 +== **1.3 General Interfaces for PG1302** ==
90 90  
91 91  * SPI interface for LoRa
92 92  * Power Input: 5v, 1A
93 93  * 1 x I-PEX for LoRa
94 94  
95 -==== 1.4 Pin Mapping ====
44 +== **1.4 Pin Mapping** ==
96 96  
97 97   [[image:1651743282627-547.png||height="402" width="425"]]
98 98  
48 +== **1.5 LEDs** ==
99 99  
100 -
101 -==== 1.5 LEDs ====
102 -
103 103   TX: Blink when transmit a packet
104 -
105 105   RX: Blink when receive a packet
106 -
107 107   Config: Always ON
108 108  
109 109  
110 -==== 1.6 Power Consumption ====
55 +== **1.6 Power Consumption** ==
111 111  
112 - TBD
57 + <300mA @ 3.3v.
113 113  
59 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
114 114  
115 -==== 1.7 Applications ====
116 116  
62 +== **1.7 Applications** ==
63 +
117 117  * Smart Buildings & Home Automation
118 118  * Logistics and Supply Chain Management
119 119  * Smart Metering
... ... @@ -121,49 +121,42 @@
121 121  * Smart Cities
122 122  * Smart Factory
123 123  
124 -=== 2. Example: Set up as LoRaWAN gateway. ===
71 += **2. Example: Set up as LoRaWAN gateway.** =
125 125  
126 -==== 2.1 System structure ====
73 +== **2.1 System structure** ==
127 127  
128 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
129 129  
130 - Set up method for other server are similar.
76 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
131 131  
132 -(% style="text-align:center" %)
133 133  [[image:1651743698677-436.png||height="457" width="686"]]
134 134  
135 135  
81 +== **2.2 Hardware Installation** ==
136 136  
137 -==== 2.2 Hardware Installation ====
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
138 138  
139 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
85 +[[image:image-20220621104746-1.png||height="381" width="451"]]
140 140  
141 -(% style="text-align:center" %)
142 -[[image:1651743803032-803.png]]
143 143  
88 += **3. Install the software?** =
144 144  
90 +There are two ways to install the software in RPi4 to use PG1302.
145 145  
146 -=== 3. Install the software? ===
92 +* Flash SD card with Dragino pre-build image which supports Web UI.
93 +* Install Lora packet forwarder in existing RPi OS.
147 147  
148 - There are two ways to install software in RPi4 to use PG1302.
95 += **4. Flash with pre-build image** =
149 149  
150 -* Flash SD card with Dragino pre-build image which support Web UI.
151 -* Install lora packet forwarder in existing RPi OS.
97 +== **4.1 Download the dragino image for RPI** ==
152 152  
153 -=== 4. Flash with pre-build image ===
99 +Download PG1302_for_Rpi4_64_with_webui from
100 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
154 154  
155 -==== 4.1 Download the dragino image for RPI ====
156 156  
157 - Download PG1302_for_Rpi4_64_with_webui from
103 +== **4.2 Flash the image to an SD card** ==
158 158  
159 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
105 +Flash the image to the SD card:
160 160  
161 -
162 -==== 4.2 Flash the image to SD card ====
163 -
164 - Flash the image to SD card:
165 -
166 -(% style="text-align:center" %)
167 167  [[image:1651744119133-233.png||height="373" width="621"]]
168 168  
169 169   Note: Download the flash tool following this link
... ... @@ -171,362 +171,360 @@
171 171   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
172 172  
173 173  
174 -==== 4.3 Access the Linux console ====
114 +== **4.3 Access the Linux console** ==
175 175  
116 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
117 +
118 +[[image:1651744193675-591.png||height="450" width="466"]]
119 +
120 +The account details for Web Login are:
121 +
176 176  (((
123 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
124 +)))
125 +
177 177  (((
178 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be
127 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
179 179  )))
180 180  
181 181  (((
182 - able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
131 +
183 183  )))
184 184  
185 185  (((
186 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
135 +**~ (% style="color:#0000ff" %)Backup account(%%)**
187 187  )))
188 -)))
189 189  
138 +(((
139 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
190 190  
191 -(% style="text-align:center" %)
192 -[[image:1651744193675-591.png||height="450" width="466"]]
141 +
142 +)))
193 193  
144 +After logging in, you will be in the Linux console and type the command here.
194 194  
195 - The account details for Web Login are:
196 -
197 -**~ User Name: root**
198 -
199 -**~ Password:   dragino**
200 -
201 -
202 -**~ Backup account**
203 -
204 -**~ Pi/dragino**
205 -
206 -
207 - After log in, you will be in the Linux console and type command here.
208 -
209 -(% style="text-align:center" %)
210 210  [[image:1651744358515-107.png||height="366" width="581"]]
211 211  
212 212  
213 -==== 4.4 Access the WebUI of RPi4. ====
149 +== **4.4 Access the WebUI of RPi4.** ==
214 214  
215 -===== 4.4.1 Home page =====
151 +=== **4.4.1 Home page** ===
216 216  
217 - Open a browser on the PC and type the RPI ip address
153 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by the uplink router)
154 +You will see the login interface of RPI as shown below.
155 +The account details for Web Login are:
218 218  
219 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
157 +(((
158 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
159 +(% style="color:#0000ff" %)** Password:   dragino**
160 +)))
220 220  
221 - You will see the login interface of RPI as shown below.
222 -
223 - The account details for Web Login are:
224 -
225 -**~ User Name: root**
226 -
227 -**~ Password:   dragino**
228 -
229 -(% style="text-align:center" %)
230 230  [[image:1651744457761-993.png||height="352" width="621"]]
231 231  
232 232  
233 -===== 4.4.2 LoRa Page =====
165 +=== **4.4.2 LoRa Page** ===
234 234  
235 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
167 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
236 236  
237 -(% style="text-align:center" %)
238 238  [[image:1651744554845-970.png||height="328" width="621"]]
239 239  
171 +Different PG1302 hardware version can support different frequency range:
240 240  
241 - Different PG1302 hardware version can support different frequency range:
173 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
242 242  
243 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
175 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
244 244  
245 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
177 +After user choose the frequency plan, he can see the actually frequency in used by checking the
246 246  
179 +page LogRead ~-~-> LoRa Log
247 247  
248 - After user choose the frequency plan, he can see the actually frequency in used by checking the
181 +Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
249 249  
250 - page LogRead ~-~-> LoRa Log
251 251  
252 - Note *: See this instruction for how to customize frequency band
184 +=== **4.4.3 LoRaWAN Page** ===
253 253  
254 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
186 +==== **4.4.3.1 Semtech UDP** ====
255 255  
256 -
257 -===== 4.4.3 LoRaWAN Page =====
258 -
259 -====== 4.4.3.1 Semtech UDP ======
260 -
261 -
262 -(% style="text-align:center" %)
263 263  [[image:1651744767914-283.png||height="352" width="621"]]
264 264  
265 - Note *: See this instruction for how to configure TTN.
190 +Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].
266 266  
267 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
268 268  
193 +==== **4.4.3.2 Basic Station** ====
269 269  
270 -====== 4.4.3.2 Basic Station ======
271 -
272 -(% style="text-align:center" %)
273 273  [[image:1651744890629-683.png||height="380" width="621"]]
274 274  
275 - Note *: See this instruction for how to configure TTN.
197 +Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].
276 276  
277 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
278 278  
200 +=== **4.4.4 LogRead** ===
279 279  
280 -===== 4.4.4 LogRead =====
202 +==== **4.4.4.1 LoRa Log** ====
281 281  
282 -====== 4.4.4.1 LoRa Log ======
283 -
284 -(% style="text-align:center" %)
285 285  [[image:1651744955955-452.png||height="571" width="621"]]
286 286  
287 - Show the frequency for LoRa Radio and traffics.
206 +Show the frequency for LoRa Radio and traffics.
288 288  
289 289  
290 -====== 4.4.4.2 System Log ======
209 +==== **4.4.4.2 System Log** ====
291 291  
292 - Show system log.
211 +Show system log.
293 293  
294 -(% style="text-align:center" %)
295 295  [[image:1651745003470-264.png||height="477" width="621"]]
296 296  
297 297  
216 +==== **4.4.4.3 Record Log** ====
298 298  
299 -====== 4.4.4.3 Record Log ======
218 +**Record the system log.**
300 300  
301 -**~ Record the system log.**
302 -
303 -(% style="text-align:center" %)
304 304  [[image:1651745069814-662.png||height="144" width="621"]]
305 305  
306 306  
307 -=== 5. Install stand alone LoRa Packet Forwarder. ===
223 += **5. Install stand-alone LoRa Packet Forwarder.** =
308 308  
309 -==== 5.1 OS requirement ====
225 +== **5.1 OS requirement** ==
310 310  
311 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
227 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
312 312  
313 - pi@raspberrypi:~~$ cat /etc/os-release
314 -
229 +(% class="box" %)
230 +(((
231 + pi@raspberrypi:~~$ cat /etc/os-release
315 315   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
316 -
317 317   NAME="Raspbian GNU/Linux"
318 -
319 319   VERSION_ID="8"
320 -
321 321   VERSION="8 (jessie)"
322 -
323 323   ID=raspbian
324 -
325 325   ID_LIKE=debian
326 -
327 327   HOME_URL="http:~/~/www.raspbian.org/"
328 -
329 329   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
330 -
331 331   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
332 332  
242 +
243 +)))
333 333  
334 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
245 +== **5.2 Get Gateway ID in Raspberry and input this in TTN v3.** ==
335 335  
336 - In RPI, run below command to get a Gateway ID
247 +In RPI, run the below command to get a Gateway ID
337 337  
338 - (% class="mark" %)ifconfig eth0
249 +(% class="box infomessage" %)
250 +(((
251 + ifconfig eth0
252 +)))
339 339  
340 -(% style="text-align:center" %)
341 341  [[image:1651745210205-512.png||height="130" width="621"]]
342 342  
256 +(((
257 +(((
258 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
259 +)))
260 +)))
343 343  
344 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
345 -
346 - Make sure to select legacy packet forwarder.
347 -
348 -(% style="text-align:center" %)
349 349  [[image:1651745267862-321.png||height="526" width="621"]]
350 350  
351 -
352 -
353 -(% style="text-align:center" %)
354 354  [[image:1651745306744-481.png||height="478" width="621"]]
355 355  
356 356  After set up, the status should show not connected as below:
357 357  
358 -(% style="text-align:center" %)
359 359  [[image:1651745366987-458.png||height="363" width="621"]]
360 360  
270 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
361 361  
362 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
272 +Enable SPI and I2C first:
363 363  
364 - Enable SPI and I2C first:
274 +a)SPI needs to be enabled on the Raspberry Pi
365 365  
366 - a)SPI needs to be enabled on the Raspberry Pi
276 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
367 367  
368 - Run sudo raspi-config to open the config window
278 +[[image:1651745476754-240.png||height="234" width="629"]]
369 369  
370 -(% style="text-align:center" %)
371 -[[image:1651745476754-240.png||height="235" width="631"]]
372 -
373 -
374 -(% style="text-align:center" %)
375 375  [[image:image-20220505181135-1.png]]
376 376  
377 -(% style="text-align:center" %)
378 -[[image:image-20220505181135-2.png]]
282 +[[image:image-20220505181135-2.png||height="229" width="622"]]
379 379  
284 +In RPI, Fist: Enter the root account:
380 380  
286 +(((
287 +[[image:1651745583363-614.png||height="151" width="732"]]
288 +)))
381 381  
290 +and then run:
382 382  
383 - In RPI , Fist: Enter root account:
292 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
384 384  
385 -(% style="text-align:center" %)
386 -[[image:1651745583363-614.png]]
294 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
387 387  
296 +(% style="background-color:#dcdcdc" %)./auto_install.sh
388 388  
389 - and then run:
298 +(((
299 +[[image:1651745611629-818.png||height="225" width="729"]]
300 +)))
390 390  
391 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
302 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
392 392  
393 - chmod +x ./auto_install.sh
304 +You can get these output:
394 394  
395 - ./auto_install.sh
306 +(((
307 +[[image:1651745657252-173.png||height="426" width="621"]]
308 +)))
396 396  
397 -(% style="text-align:center" %)
398 -[[image:1651745611629-818.png]]
310 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
399 399  
312 +(((
313 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
314 +)))
400 400  
401 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
316 +(((
317 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
318 +)))
402 402  
403 - You can get these output:
320 +[[image:1651745709709-887.png||height="820" width="621"]]
404 404  
405 -(% style="text-align:center" %)
406 -[[image:1651745657252-173.png||height="426" width="621"]]
322 +User can find the TTN v3 server address from:
407 407  
324 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
408 408  
409 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
326 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
410 410  
411 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
328 +[[image:1651745838008-820.png||height="650" width="621"]]
412 412  
413 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
330 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
414 414  
415 -(% style="text-align:center" %)
416 -[[image:1651745709709-887.png||height="820" width="621"]]
332 + 1).Chose your need the name of region frequency.
417 417  
334 +[[image:1651745867516-322.png||height="83" width="740"]]
418 418  
419 - User can find the TTN v3 server address from:
336 + 2). Use this command to copy it.
420 420  
421 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
338 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
422 422  
340 +[[image:1651745984006-868.png||height="87" width="745"]]
423 423  
424 - And the default frequency band is US915 in **global_conf.json** file.
342 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
425 425  
426 -(% style="text-align:center" %)
427 -[[image:1651745838008-820.png||height="650" width="621"]]
428 428  
429 429  
430 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
431 431  
432 - 1).Chose your need the name of region frequency.
347 +=== 5.2.3 Check result ===
433 433  
434 -(% style="text-align:center" %)
435 -[[image:1651745867516-322.png]]
349 +(((
350 +Run below command to restart the dragino_fwd:
351 +)))
436 436  
353 +(((
354 +(% class="box infomessage" %)
355 +(((
356 +sudo systemctl stop draginofwd
357 +)))
437 437  
438 - 2). Use this command to copy it.
359 +(% class="box infomessage" %)
360 +(((
361 +sudo systemctl start draginofwd
362 +)))
363 +)))
439 439  
440 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
365 +(((
366 +debug check the ruing status of fwd:
367 +)))
441 441  
442 -(% style="text-align:center" %)
443 -[[image:1651745984006-868.png]]
444 -
445 -
446 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
447 -
448 -(% class="wikigeneratedid" %)
449 449  (((
450 -
370 +(% class="box infomessage" %)
371 +(((
372 +sudo systemctl status draginofwd
451 451  )))
374 +)))
452 452  
453 -===== 5.2.3 Check result =====
376 +[[image:1651746045057-414.png||height="193" width="729"]]
454 454  
455 - Run below command to restart the dragino_fwd:
378 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
456 456  
457 - sudo systemctl stop draginofwd
380 +[[image:1651746078253-168.png||height="372" width="621"]]
458 458  
459 - sudo systemctl start draginofwd
460 460  
461 - debug check the ruing status of fwd:
383 +We can check dragino_fwd running states in RPi by running:
462 462  
463 - sudo systemctl status draginofwd
385 +(% class="box infomessage" %)
386 +(((
387 + sudo journalctl -u draginofwd -f
388 +)))
464 464  
465 -(% style="text-align:center" %)
466 -[[image:1651746045057-414.png]]
390 +[[image:1651746111963-838.png||height="184" width="730"]]
467 467  
392 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in **TTN v3 –> Gateway ~-~-> Live data**
468 468  
469 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
394 +[[image:1651746139304-966.png||height="326" width="621"]]
470 470  
471 -(% style="text-align:center" %)
472 -[[image:1651746078253-168.png||height="372" width="621"]]
473 473  
397 +=== 5.2.4 Commands to handle service ===
474 474  
475 - We can check dragino_fwd running states in RPi by running:
399 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
400 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
401 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
402 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
403 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
476 476  
477 - //**sudo journalctl -u draginofwd -f**//
478 478  
479 -(% style="text-align:center" %)
480 -[[image:1651746111963-838.png]]
481 481  
482 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
483 483  
484 -(% style="text-align:center" %)
485 -[[image:1651746139304-966.png||height="326" width="621"]]
408 += 6. Order Info =
486 486  
410 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
487 487  
488 -===== 5.2.4 Commands to handle service =====
412 +**~ (% style="color:#0000ff" %)XX:(%%)**
489 489  
490 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
491 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
492 -* **Start** dragino_fwd : sudo systemctl start draginofwd
493 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
494 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
414 +* (% style="color:#0000ff" %)**868** (%%)(For Bands: EU868,IN865)
415 +* (% style="color:#0000ff" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
416 +* (% style="color:#0000ff" %)**470** (%%)(For Band: CN470)
495 495  
496 -=== 6. Order Info ===
497 497  
498 - Part Number: **PG1302-XX**  Or  Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
499 499  
500 -**~ XX:**
501 501  
502 -* 868 (For Bands: EU868,IN865)
503 -* 915 (For Bands: US915,AU915,AS923,KR920)
504 -* 470 (For Band: CN470)
421 += 7. Packing Info =
505 505  
506 -=== 7. Packing Info ===
423 +(((
424 +
507 507  
508 -**~ PG1302 Package Includes**:
426 +**PG1302 Package Includes**:
427 +)))
509 509  
429 +(((
430 +(((
510 510  * PG1302 x 1
511 511  * LoRa Antenna x 1
433 +)))
434 +)))
512 512  
513 -**~ PG1302-PI Package Includes**:
436 +(((
437 +
514 514  
439 +
440 +**PG1302-PI Package Includes**:
441 +)))
442 +
515 515  * PG1302 x 1
516 516  * LoRa Antenna x 1
517 517  * RPi3/4 converter PCB
518 518  * Screws to hole converter PCB on RPI.
519 519  
520 -=== 8. Reference ===
448 +**PG1302-PI Dimension and weight: **
521 521  
522 -* Datasheet, User Manual & Software Download:
450 +* Device Size: 18 x 8 x 4 cm
451 +* Weight: 150g
523 523  
524 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
525 525  
526 526  
527 -=== 9. Support ===
528 528  
529 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
530 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
456 +(((
457 += 8. Support =
531 531  
532 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
459 +(((
460 +If you are experiencing issues and can’t solve, you can send mail to
461 +)))
462 +
463 +(((
464 +[[support@dragino.com>>mailto:support@dragino.com]]
465 +)))
466 +
467 +(((
468 +With your question as detail as possible. We will reply and help you in the shortest.
469 +)))
470 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0