Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 81.1 >
edited by Xiaoling
on 2022/05/06 15:33
To version < 110.2 >
edited by Xiaoling
on 2022/12/21 09:40
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,54 +3,40 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
10 -
11 -
12 -**PG1302 LoRaWAN Concentrator User Manual**
13 -
14 -
15 -
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
17 += 1. Introduction =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
31 31  
32 -(((
33 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 -)))
35 35  
36 36  (((
37 -The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
23 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
38 38  )))
39 39  
40 40  (((
41 -PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
27 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
42 42  )))
43 43  
44 44  (((
45 -(((
46 -
31 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
47 47  )))
48 -)))
49 49  
50 -==== 1.2 Features ====
51 51  
35 +== 1.2 Features ==
36 +
37 +
52 52  * Base on Semtech SX1302 solution
53 53  * Support Raspberry Pi 3B/3B+/4
54 54  * Up to -140dBm sensitivity
... ... @@ -56,34 +56,46 @@
56 56  * Mini-PCIe Interface
57 57  * Converter board to support Raspberry Pi
58 58  
59 -==== 1.3 General Interfaces ====
60 60  
46 +
47 +== 1.3 General Interfaces for PG1302 ==
48 +
49 +
61 61  * SPI interface for LoRa
62 62  * Power Input: 5v, 1A
63 63  * 1 x I-PEX for LoRa
53 +* Working Temperature: -40 ℃ ~~ 65℃
64 64  
65 -==== 1.4 Pin Mapping ====
66 66  
56 +
57 +== 1.4 Pin Mapping ==
58 +
59 +
67 67   [[image:1651743282627-547.png||height="402" width="425"]]
68 68  
69 69  
70 70  
71 -==== 1.5 LEDs ====
64 +== 1.5 LEDs ==
72 72  
73 - TX: Blink when transmit a packet
74 74  
75 - RX: Blink when receive a packet
67 +(((
68 +TX: Blink when transmit a packet
69 +RX: Blink when receive a packet
70 +Config: Always ON
71 +)))
76 76  
77 - Config: Always ON
78 78  
74 +== 1.6 Power Consumption ==
79 79  
80 -==== 1.6 Power Consumption ====
81 81  
82 - TBD
77 +<300mA @ 3.3v.
83 83  
79 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
84 84  
85 -==== 1.7 Applications ====
86 86  
82 +== 1.7 Applications ==
83 +
84 +
87 87  * Smart Buildings & Home Automation
88 88  * Logistics and Supply Chain Management
89 89  * Smart Metering
... ... @@ -91,414 +91,480 @@
91 91  * Smart Cities
92 92  * Smart Factory
93 93  
94 -=== 2. Example: Set up as LoRaWAN gateway. ===
95 95  
96 -==== 2.1 System structure ====
97 97  
98 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
94 += 2. Example: Set up as LoRaWAN gateway =
99 99  
100 - Set up method for other server are similar.
96 +== 2.1 System structure ==
101 101  
102 -(% style="text-align:center" %)
98 +
99 +(((
100 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
101 +
102 +
103 +)))
104 +
103 103  [[image:1651743698677-436.png||height="457" width="686"]]
104 104  
105 105  
106 106  
107 -==== 2.2 Hardware Installation ====
109 +== 2.2 Hardware Installation ==
108 108  
109 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
110 110  
111 -(% style="text-align:center" %)
112 -[[image:1651743803032-803.png]]
112 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
113 113  
114 +[[image:image-20220621104746-1.png||height="381" width="451"]]
114 114  
115 115  
116 -=== 3. Install the software? ===
117 117  
118 - There are two ways to install software in RPi4 to use PG1302.
118 += 3. Install the software? =
119 119  
120 -* Flash SD card with Dragino pre-build image which support Web UI.
121 -* Install lora packet forwarder in existing RPi OS.
122 122  
123 -=== 4. Flash with pre-build image ===
121 +There are two ways to install the software in RPi4 to use PG1302.
124 124  
125 -==== 4.1 Download the dragino image for RPI ====
123 +* Flash SD card with Dragino pre-build image which supports Web UI.
124 +* Install Lora packet forwarder in existing RPi OS.
126 126  
127 - Download PG1302_for_Rpi4_64_with_webui from
128 128  
129 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
130 130  
128 += 4. Flash with pre-build image =
131 131  
132 -==== 4.2 Flash the image to SD card ====
130 +== 4.1 Download the dragino image for RPI ==
133 133  
134 - Flash the image to SD card:
135 135  
136 -(% style="text-align:center" %)
133 +(((
134 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
135 +)))
136 +
137 +
138 +== 4.2 Flash the image to an SD card ==
139 +
140 +
141 +Flash the image to the SD card:
142 +
137 137  [[image:1651744119133-233.png||height="373" width="621"]]
138 138  
139 - Note: Download the flash tool following this link
140 140  
141 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
146 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
142 142  
143 143  
144 -==== 4.3 Access the Linux console ====
149 +== 4.3 Access the Linux console ==
145 145  
146 -(((
147 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be
148 -)))
149 149  
150 150  (((
151 - able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
153 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
152 152  )))
153 153  
154 -(((
155 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
156 -)))
157 157  
158 -
159 -(% style="text-align:center" %)
160 160  [[image:1651744193675-591.png||height="450" width="466"]]
161 161  
159 +The account details for Web Login are:
162 162  
163 - The account details for Web Login are:
161 +(((
162 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
163 +)))
164 164  
165 -**~ User Name: root**
165 +(((
166 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
167 +)))
166 166  
167 -**~ Password:   dragino**
169 +(((
170 +
171 +)))
168 168  
173 +(((
174 +**~ (% style="color:#0000ff" %)Backup account(%%)**
175 +)))
169 169  
170 -**~ Backup account**
177 +(((
178 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
171 171  
172 -**~ Pi/dragino**
180 +
181 +)))
173 173  
183 +After logging in, you will be in the Linux console and type the command here.
174 174  
175 - After log in, you will be in the Linux console and type command here.
176 -
177 -(% style="text-align:center" %)
178 178  [[image:1651744358515-107.png||height="366" width="581"]]
179 179  
180 180  
181 -==== 4.4 Access the WebUI of RPi4. ====
188 +== 4.4 Access the WebUI of RPi4 ==
182 182  
183 -===== 4.4.1 Home page =====
190 +=== 4.4.1 Home page ===
184 184  
185 - Open a browser on the PC and type the RPI ip address
186 186  
187 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
193 +(((
194 +Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
195 +You will see the login interface of RPI as shown below.
196 +The account details for Web Login are:
197 +)))
188 188  
189 - You will see the login interface of RPI as shown below.
199 +(((
200 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
201 +(% style="color:#0000ff" %)** Password:   dragino**
190 190  
191 - The account details for Web Login are:
203 +
204 +)))
192 192  
193 -**~ User Name: root**
206 +[[image:1651744457761-993.png||height="352" width="621"]]
194 194  
195 -**~ Password:   dragino**
196 196  
197 -(% style="text-align:center" %)
198 -[[image:1651744457761-993.png||height="352" width="621"]]
209 +=== 4.4.2 LoRa Page ===
199 199  
200 200  
201 -===== 4.4.2 LoRa Page =====
212 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
202 202  
203 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
204 204  
205 -(% style="text-align:center" %)
206 206  [[image:1651744554845-970.png||height="328" width="621"]]
207 207  
208 208  
209 - Different PG1302 hardware version can support different frequency range:
218 +Different PG1302 hardware version can support different frequency range:
210 210  
211 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
220 +* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
221 +* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
212 212  
213 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
223 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
214 214  
225 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
215 215  
216 - After user choose the frequency plan, he can see the actually frequency in used by checking the
217 217  
218 - page LogRead ~-~-> LoRa Log
228 +=== 4.4.3 LoRaWAN Page ===
219 219  
220 - Note *: See this instruction for how to customize frequency band
230 +==== 4.4.3.1 Semtech UDP ====
221 221  
222 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
223 223  
233 +[[image:1651744767914-283.png||height="352" width="621"]]
224 224  
225 -===== 4.4.3 LoRaWAN Page =====
226 226  
227 -====== 4.4.3.1 Semtech UDP ======
236 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
228 228  
229 229  
230 -(% style="text-align:center" %)
231 -[[image:1651744767914-283.png||height="352" width="621"]]
239 +==== 4.4.3.2 Basic Station ====
232 232  
233 - Note *: See this instruction for how to configure TTN.
234 234  
235 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
242 +[[image:1651744890629-683.png||height="380" width="621"]]
236 236  
237 237  
238 -====== 4.4.3.2 Basic Station ======
245 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
239 239  
240 -(% style="text-align:center" %)
241 -[[image:1651744890629-683.png||height="380" width="621"]]
242 242  
243 - Note *: See this instruction for how to configure TTN.
248 +=== 4.4.4 LogRead ===
244 244  
245 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
250 +==== 4.4.4.1 LoRa Log ====
246 246  
247 247  
248 -===== 4.4.4 LogRead =====
253 +[[image:1651744955955-452.png||height="571" width="621"]]
249 249  
250 -====== 4.4.4.1 LoRa Log ======
251 251  
252 -(% style="text-align:center" %)
253 -[[image:1651744955955-452.png||height="571" width="621"]]
256 +Show the frequency for LoRa Radio and traffics.
254 254  
255 - Show the frequency for LoRa Radio and traffics.
256 256  
259 +==== 4.4.4.2 System Log ====
257 257  
258 -====== 4.4.4.2 System Log ======
259 259  
260 - Show system log.
262 +Show system log.
261 261  
262 -(% style="text-align:center" %)
264 +
263 263  [[image:1651745003470-264.png||height="477" width="621"]]
264 264  
265 265  
268 +==== 4.4.4.3 Record Log ====
266 266  
267 -====== 4.4.4.3 Record Log ======
268 268  
269 -**~ Record the system log.**
271 +**Record the system log.**
270 270  
271 -(% style="text-align:center" %)
273 +
272 272  [[image:1651745069814-662.png||height="144" width="621"]]
273 273  
274 274  
275 -=== 5. Install stand alone LoRa Packet Forwarder. ===
277 += 5. Install stand-alone LoRa Packet Forwarder =
276 276  
277 -==== 5.1 OS requirement ====
279 +== 5.1 OS requirement ==
278 278  
279 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
280 280  
281 - pi@raspberrypi:~~$ cat /etc/os-release
282 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
282 282  
284 +(% class="box" %)
285 +(((
286 + pi@raspberrypi:~~$ cat /etc/os-release
283 283   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
284 -
285 285   NAME="Raspbian GNU/Linux"
286 -
287 287   VERSION_ID="8"
288 -
289 289   VERSION="8 (jessie)"
290 -
291 291   ID=raspbian
292 -
293 293   ID_LIKE=debian
294 -
295 295   HOME_URL="http:~/~/www.raspbian.org/"
296 -
297 297   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
298 -
299 299   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
300 300  
297 +
298 +)))
301 301  
302 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
303 303  
304 - In RPI, run below command to get a Gateway ID
301 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3 ==
305 305  
306 - (% class="mark" %)ifconfig eth0
307 307  
308 -(% style="text-align:center" %)
304 +In RPI, run the below command to get a Gateway ID
305 +
306 +(% class="box infomessage" %)
307 +(((
308 +**~ ifconfig eth0**
309 +)))
310 +
309 309  [[image:1651745210205-512.png||height="130" width="621"]]
310 310  
311 311  
312 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
314 +(((
315 +(((
316 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
313 313  
314 - Make sure to select legacy packet forwarder.
318 +
319 +)))
320 +)))
315 315  
316 -(% style="text-align:center" %)
317 317  [[image:1651745267862-321.png||height="526" width="621"]]
318 318  
319 -
320 -
321 -(% style="text-align:center" %)
322 322  [[image:1651745306744-481.png||height="478" width="621"]]
323 323  
326 +
324 324  After set up, the status should show not connected as below:
325 325  
326 -(% style="text-align:center" %)
327 327  [[image:1651745366987-458.png||height="363" width="621"]]
328 328  
329 329  
330 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
332 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
331 331  
332 - Enable SPI and I2C first:
333 333  
334 - a)SPI needs to be enabled on the Raspberry Pi
335 +Enable SPI and I2C first:
335 335  
336 - Run sudo raspi-config to open the config window
337 +a)  SPI needs to be enabled on the Raspberry Pi
337 337  
338 -(% style="text-align:center" %)
339 -[[image:1651745476754-240.png||height="235" width="631"]]
339 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
340 340  
341 +[[image:1651745476754-240.png||height="234" width="629"]]
341 341  
342 -(% style="text-align:center" %)
343 +
343 343  [[image:image-20220505181135-1.png]]
344 344  
345 -(% style="text-align:center" %)
346 -[[image:image-20220505181135-2.png]]
347 347  
347 +[[image:image-20220505181135-2.png||height="229" width="622"]]
348 348  
349 349  
350 350  
351 - In RPI , Fist: Enter root account:
351 +In RPI, Fist: Enter the root account:
352 352  
353 -(% style="text-align:center" %)
354 -[[image:1651745583363-614.png]]
353 +(((
354 +[[image:1651745583363-614.png||height="151" width="732"]]
355 355  
356 +
357 +)))
356 356  
357 - and then run:
358 358  
359 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
360 +**Select the appropriate device version to download:**
360 360  
361 - chmod +x ./auto_install.sh
362 362  
363 - ./auto_install.sh
363 +(((
364 +**draginofwd-32bit**
364 364  
365 -(% style="text-align:center" %)
366 -[[image:1651745611629-818.png]]
366 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
367 367  
368 368  
369 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
369 +**dragino-64bit**
370 +)))
370 370  
371 - You can get these output:
372 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
372 372  
373 -(% style="text-align:center" %)
374 -[[image:1651745657252-173.png||height="426" width="621"]]
375 375  
375 +**dragino-tiker-32bit**
376 376  
377 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
377 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
378 378  
379 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
380 380  
381 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
380 +(((
381 +
382 382  
383 -(% style="text-align:center" %)
384 -[[image:1651745709709-887.png||height="820" width="621"]]
383 +[[image:image-20220928181226-1.png||height="218" width="1100"]]
385 385  
385 +
386 +)))
386 386  
387 - User can find the TTN v3 server address from:
388 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
388 388  
389 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
390 390  
391 +(((
392 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
393 +)))
391 391  
392 - And the default frequency band is US915 in **global_conf.json** file.
395 +(((
396 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
393 393  
394 -(% style="text-align:center" %)
398 +
399 +)))
400 +
401 +[[image:1651745709709-887.png||height="820" width="621"]]
402 +
403 +
404 +User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
405 +
406 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
407 +
395 395  [[image:1651745838008-820.png||height="650" width="621"]]
396 396  
397 397  
398 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
411 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
399 399  
400 - 1).Chose your need the name of region frequency.
413 +**~ 1). Chose your need the name of region frequency.**
401 401  
402 -(% style="text-align:center" %)
403 -[[image:1651745867516-322.png]]
404 404  
416 +[[image:1651745867516-322.png||height="83" width="740"]]
405 405  
406 - 2). Use this command to copy it.
407 407  
408 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
409 409  
410 -(% style="text-align:center" %)
411 -[[image:1651745984006-868.png]]
420 +**~ 2). Use this command to copy it.**
412 412  
422 +(% class="box infomessage" %)
423 +(((
424 +**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
425 +)))
413 413  
414 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
427 +[[image:1651745984006-868.png||height="87" width="745"]]
415 415  
416 -(% class="wikigeneratedid" %)
429 +
430 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
431 +
432 +
433 +
434 +=== 5.2.3 Check result ===
435 +
436 +
417 417  (((
418 -
438 +Run below command to restart the dragino_fwd:
419 419  )))
420 420  
421 -===== 5.2.3 Check result =====
441 +(((
442 +(% class="box infomessage" %)
443 +(((
444 +**sudo systemctl stop draginofwd**
445 +)))
422 422  
423 - Run below command to restart the dragino_fwd:
447 +(% class="box infomessage" %)
448 +(((
449 +**sudo systemctl start draginofwd**
450 +)))
451 +)))
424 424  
425 - sudo systemctl stop draginofwd
426 426  
427 - sudo systemctl start draginofwd
454 +(((
455 +debug check the ruing status of fwd:
456 +)))
428 428  
429 - debug check the ruing status of fwd:
458 +(((
459 +(% class="box infomessage" %)
460 +(((
461 +**sudo systemctl status draginofwd**
462 +)))
463 +)))
430 430  
431 - sudo systemctl status draginofwd
465 +[[image:1651746045057-414.png||height="193" width="729"]]
432 432  
433 -(% style="text-align:center" %)
434 -[[image:1651746045057-414.png]]
435 435  
436 436  
437 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
469 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
438 438  
439 -(% style="text-align:center" %)
471 +
440 440  [[image:1651746078253-168.png||height="372" width="621"]]
441 441  
442 442  
443 443  
444 - We can check dragino_fwd running states in RPi by running:
476 +We can check dragino_fwd running states in RPi by running:
445 445  
446 - //**sudo journalctl -u draginofwd -f**//
478 +(% class="box infomessage" %)
479 +(((
480 +**~ sudo journalctl -u draginofwd -f**
481 +)))
447 447  
448 -(% style="text-align:center" %)
449 -[[image:1651746111963-838.png]]
483 +[[image:1651746111963-838.png||height="184" width="730"]]
450 450  
451 451  
452 452  
453 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
487 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
454 454  
455 -(% style="text-align:center" %)
456 456  [[image:1651746139304-966.png||height="326" width="621"]]
457 457  
458 458  
492 +=== 5.2.4 Commands to handle service ===
459 459  
460 -===== 5.2.4 Commands to handle service =====
461 461  
462 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
463 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
464 -* **Start** dragino_fwd : sudo systemctl start draginofwd
465 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
466 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
495 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
496 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
497 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
498 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
499 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
467 467  
468 -=== 6. Order Info ===
469 469  
470 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
471 471  
472 -**~ XX:**
503 += 6. Order Info =
473 473  
474 -* 868 (For Bands: EU868,IN865)
475 -* 915 (For Bands: US915,AU915,AS923,KR920)
476 -* 470 (For Band: CN470)
477 477  
478 -=== 7. Packing Info ===
506 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
479 479  
480 -**~ PG1302 Package Includes**:
508 +**~ (% style="color:#0000ff" %)XX:(%%)**
481 481  
510 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
511 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
512 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
513 +
514 +
515 +
516 += 7. Packing Info =
517 +
518 +(((
519 +
520 +
521 +**PG1302 Package Includes**:
522 +)))
523 +
524 +(((
525 +(((
482 482  * PG1302 x 1
483 483  * LoRa Antenna x 1
528 +)))
529 +)))
484 484  
485 -**~ PG1302-PI Package Includes**:
531 +(((
532 +
486 486  
534 +**PG1302-PI Package Includes**:
535 +)))
536 +
487 487  * PG1302 x 1
488 488  * LoRa Antenna x 1
489 489  * RPi3/4 converter PCB
490 490  * Screws to hole converter PCB on RPI.
491 491  
492 -=== 8. Reference ===
493 493  
494 -* Datasheet, User Manual & Software Download:
543 +**PG1302-PI Dimension and weight: **
495 495  
496 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
545 +* Device Size: 18 x 8 x 4 cm
546 +* Weight: 150g
497 497  
498 498  
499 -=== 9. Support ===
500 500  
501 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
502 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
550 +(((
551 += 8. Support =
503 503  
504 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
553 +
554 +(((
555 +If you are experiencing issues and can't solve, you can send mail to
556 +)))
557 +
558 +(((
559 +[[support@dragino.com>>mailto:support@dragino.com]]
560 +)))
561 +
562 +(((
563 +With your question as detail as possible. We will reply and help you in the shortest.
564 +
565 +
566 +
567 +)))
568 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0