Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 79.1 >
edited by Xiaoling
on 2022/05/06 15:22
To version < 108.15 >
edited by Xiaoling
on 2022/08/10 11:43
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,54 +3,41 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
10 -
11 -
12 -**PG1302 LoRaWAN Concentrator User Manual**
13 -
14 -
15 -
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
17 += **1. Introduction** =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 +== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
31 31  
32 -(((
33 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 -)))
35 35  
36 36  (((
37 -The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
23 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
38 38  )))
39 39  
40 40  (((
41 -PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
27 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
42 42  )))
43 43  
44 44  (((
45 -(((
46 -
31 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
47 47  )))
48 -)))
49 49  
50 -==== 1.2 Features ====
51 51  
35 +
36 +== **1.2 Features** ==
37 +
38 +
52 52  * Base on Semtech SX1302 solution
53 53  * Support Raspberry Pi 3B/3B+/4
54 54  * Up to -140dBm sensitivity
... ... @@ -56,34 +56,43 @@
56 56  * Mini-PCIe Interface
57 57  * Converter board to support Raspberry Pi
58 58  
59 -==== 1.3 General Interfaces ====
60 60  
47 +== **1.3 General Interfaces for PG1302** ==
48 +
49 +
61 61  * SPI interface for LoRa
62 62  * Power Input: 5v, 1A
63 63  * 1 x I-PEX for LoRa
64 64  
65 -==== 1.4 Pin Mapping ====
66 66  
55 +== **1.4 Pin Mapping** ==
56 +
57 +
67 67   [[image:1651743282627-547.png||height="402" width="425"]]
68 68  
69 69  
70 70  
71 -==== 1.5 LEDs ====
62 +== **1.5 LEDs** ==
72 72  
73 - TX: Blink when transmit a packet
74 74  
75 - RX: Blink when receive a packet
65 +TX: Blink when transmit a packet
66 +RX: Blink when receive a packet
67 +Config: Always ON
76 76  
77 - Config: Always ON
78 78  
79 79  
80 -==== 1.6 Power Consumption ====
71 +== **1.6 Power Consumption** ==
81 81  
82 - TBD
83 83  
74 +<300mA @ 3.3v.
84 84  
85 -==== 1.7 Applications ====
76 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
86 86  
78 +
79 +
80 +== **1.7 Applications** ==
81 +
82 +
87 87  * Smart Buildings & Home Automation
88 88  * Logistics and Supply Chain Management
89 89  * Smart Metering
... ... @@ -91,410 +91,461 @@
91 91  * Smart Cities
92 92  * Smart Factory
93 93  
94 -=== 2. Example: Set up as LoRaWAN gateway. ===
95 95  
96 -==== 2.1 System structure ====
91 += **2. Example: Set up as LoRaWAN gateway.** =
97 97  
98 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
93 +== **2.1 System structure** ==
99 99  
100 - Set up method for other server are similar.
101 101  
102 -(% style="text-align:center" %)
96 +(((
97 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
98 +)))
99 +
103 103  [[image:1651743698677-436.png||height="457" width="686"]]
104 104  
105 105  
106 106  
107 -==== 2.2 Hardware Installation ====
104 +== **2.2 Hardware Installation** ==
108 108  
109 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
110 110  
111 -(% style="text-align:center" %)
112 -[[image:1651743803032-803.png]]
107 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
113 113  
109 +[[image:image-20220621104746-1.png||height="381" width="451"]]
114 114  
115 115  
116 -=== 3. Install the software? ===
117 117  
118 - There are two ways to install software in RPi4 to use PG1302.
113 += **3. Install the software?** =
119 119  
120 -* Flash SD card with Dragino pre-build image which support Web UI.
121 -* Install lora packet forwarder in existing RPi OS.
122 122  
123 -=== 4. Flash with pre-build image ===
116 +There are two ways to install the software in RPi4 to use PG1302.
124 124  
125 -==== 4.1 Download the dragino image for RPI ====
118 +* Flash SD card with Dragino pre-build image which supports Web UI.
119 +* Install Lora packet forwarder in existing RPi OS.
126 126  
127 - Download PG1302_for_Rpi4_64_with_webui from
128 128  
129 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
122 += **4. Flash with pre-build image** =
130 130  
124 +== **4.1 Download the dragino image for RPI** ==
131 131  
132 -==== 4.2 Flash the image to SD card ====
133 133  
134 - Flash the image to SD card:
127 +(((
128 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
129 +)))
135 135  
136 -(% style="text-align:center" %)
137 -[[image:1651744119133-233.png||height="373" width="621"]]
138 138  
139 - Note: Download the flash tool following this link
140 140  
141 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
133 +== **4.2 Flash the image to an SD card** ==
142 142  
143 143  
144 -==== 4.3 Access the Linux console ====
136 +Flash the image to the SD card:
145 145  
146 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
138 +[[image:1651744119133-233.png||height="373" width="621"]]
147 147  
148 -Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
149 149  
150 -(% style="text-align:center" %)
151 -[[image:1651744193675-591.png||height="450" width="466"]]
141 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
152 152  
153 153  
154 - The account details for Web Login are:
155 155  
156 -**~ User Name: root**
145 +== **4.3 Access the Linux console** ==
157 157  
158 -**~ Password:   dragino**
159 159  
148 +(((
149 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
150 +)))
160 160  
161 -**~ Backup account**
162 162  
163 -**~ Pi/dragino**
153 +[[image:1651744193675-591.png||height="450" width="466"]]
164 164  
155 +The account details for Web Login are:
165 165  
166 - After log in, you will be in the Linux console and type command here.
157 +(((
158 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
159 +)))
167 167  
168 -(% style="text-align:center" %)
169 -[[image:1651744358515-107.png||height="366" width="581"]]
161 +(((
162 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
163 +)))
170 170  
165 +(((
166 +
167 +)))
171 171  
172 -==== 4.4 Access the WebUI of RPi4. ====
169 +(((
170 +**~ (% style="color:#0000ff" %)Backup account(%%)**
171 +)))
173 173  
174 -===== 4.4.1 Home page =====
173 +(((
174 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
175 175  
176 - Open a browser on the PC and type the RPI ip address
176 +
177 +)))
177 177  
178 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
179 +After logging in, you will be in the Linux console and type the command here.
179 179  
181 +[[image:1651744358515-107.png||height="366" width="581"]]
180 180  
181 - You will see the login interface of RPI as shown below.
182 182  
183 - The account details for Web Login are:
184 184  
185 -**~ User Name: root**
185 +== **4.4 Access the WebUI of RPi4.** ==
186 186  
187 -**~ Password:   dragino**
187 +=== **4.4.1 Home page** ===
188 188  
189 -(% style="text-align:center" %)
190 -[[image:1651744457761-993.png||height="352" width="621"]]
191 191  
190 +(((
191 +Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
192 +You will see the login interface of RPI as shown below.
193 +The account details for Web Login are:
194 +)))
192 192  
193 -===== 4.4.2 LoRa Page =====
196 +(((
197 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
198 +(% style="color:#0000ff" %)** Password:   dragino**
194 194  
195 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
200 +
201 +)))
196 196  
197 -(% style="text-align:center" %)
198 -[[image:1651744554845-970.png||height="328" width="621"]]
203 +[[image:1651744457761-993.png||height="352" width="621"]]
199 199  
200 200  
201 - Different PG1302 hardware version can support different frequency range:
202 202  
203 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
207 +=== **4.4.2 LoRa Page** ===
204 204  
205 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
206 206  
210 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
207 207  
208 - After user choose the frequency plan, he can see the actually frequency in used by checking the
212 +[[image:1651744554845-970.png||height="328" width="621"]]
209 209  
210 - page LogRead ~-~-> LoRa Log
214 +Different PG1302 hardware version can support different frequency range:
211 211  
212 - Note *: See this instruction for how to customize frequency band
216 +➢** (% style="color:red" %)868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.(%%)**
213 213  
214 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
218 +➢ (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
215 215  
220 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
216 216  
217 -===== 4.4.3 LoRaWAN Page =====
222 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
218 218  
219 -====== 4.4.3.1 Semtech UDP ======
220 220  
221 221  
222 -(% style="text-align:center" %)
223 -[[image:1651744767914-283.png||height="352" width="621"]]
226 +=== **4.4.3 LoRaWAN Page** ===
224 224  
228 +==== **4.4.3.1 Semtech UDP** ====
225 225  
226 226  
227 - Note *: See this instruction for how to configure TTN.
231 +[[image:1651744767914-283.png||height="352" width="621"]]
228 228  
229 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
233 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
230 230  
231 231  
232 -====== 4.4.3.2 Basic Station ======
233 233  
234 -(% style="text-align:center" %)
237 +==== **4.4.3.2 Basic Station** ====
238 +
239 +
235 235  [[image:1651744890629-683.png||height="380" width="621"]]
236 236  
237 237  
238 - Note *: See this instruction for how to configure TTN.
243 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
239 239  
240 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
241 241  
242 242  
243 -===== 4.4.4 LogRead =====
247 +=== **4.4.4 LogRead** ===
244 244  
245 -====== 4.4.4.1 LoRa Log ======
249 +==== **4.4.4.1 LoRa Log** ====
246 246  
247 -(% style="text-align:center" %)
251 +
248 248  [[image:1651744955955-452.png||height="571" width="621"]]
249 249  
254 +Show the frequency for LoRa Radio and traffics.
250 250  
251 - Show the frequency for LoRa Radio and traffics.
252 252  
253 253  
254 -====== 4.4.4.2 System Log ======
258 +==== **4.4.4.2 System Log** ====
255 255  
256 - Show system log.
257 257  
258 -(% style="text-align:center" %)
261 +Show system log.
262 +
259 259  [[image:1651745003470-264.png||height="477" width="621"]]
260 260  
261 261  
262 262  
263 -====== 4.4.4.3 Record Log ======
267 +==== **4.4.4.3 Record Log** ====
264 264  
265 -**~ Record the system log.**
266 266  
267 -(% style="text-align:center" %)
270 +**Record the system log.**
271 +
268 268  [[image:1651745069814-662.png||height="144" width="621"]]
269 269  
270 270  
271 -=== 5. Install stand alone LoRa Packet Forwarder. ===
272 272  
273 -==== 5.1 OS requirement ====
276 += **5. Install stand-alone LoRa Packet Forwarder.** =
274 274  
275 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
278 +== **5.1 OS requirement** ==
276 276  
277 - pi@raspberrypi:~~$ cat /etc/os-release
278 278  
279 - PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
281 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
280 280  
283 +(% class="box" %)
284 +(((
285 + pi@raspberrypi:~~$ cat /etc/os-release
286 + PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
281 281   NAME="Raspbian GNU/Linux"
282 -
283 283   VERSION_ID="8"
284 -
285 285   VERSION="8 (jessie)"
286 -
287 287   ID=raspbian
288 -
289 289   ID_LIKE=debian
290 -
291 291   HOME_URL="http:~/~/www.raspbian.org/"
292 -
293 293   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
294 -
295 295   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
296 296  
296 +
297 +)))
297 297  
298 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
299 299  
300 - In RPI, run below command to get a Gateway ID
301 301  
302 - ifconfig eth0
301 +== **5.2 Get Gateway ID in Raspberry and input this in TTN v3** ==
303 303  
304 -(% style="text-align:center" %)
305 -[[image:1651745210205-512.png||height="130" width="621"]]
306 306  
304 +In RPI, run the below command to get a Gateway ID
307 307  
308 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
306 +(% class="box infomessage" %)
307 +(((
308 +**~ ifconfig eth0**
309 +)))
309 309  
310 - Make sure to select legacy packet forwarder.
311 +[[image:1651745210205-512.png||height="130" width="621"]]
311 311  
312 -(% style="text-align:center" %)
313 -[[image:1651745267862-321.png||height="526" width="621"]]
314 314  
314 +(((
315 +(((
316 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
315 315  
318 +
319 +)))
320 +)))
316 316  
317 -(% style="text-align:center" %)
322 +[[image:1651745267862-321.png||height="526" width="621"]]
323 +
318 318  [[image:1651745306744-481.png||height="478" width="621"]]
319 319  
326 +
320 320  After set up, the status should show not connected as below:
321 321  
322 -(% style="text-align:center" %)
323 323  [[image:1651745366987-458.png||height="363" width="621"]]
324 324  
325 325  
326 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
327 327  
328 - Enable SPI and I2C first:
333 +=== **5.2.1 Download and install LoRaWAN packet forwarder** ===
329 329  
330 - a)SPI needs to be enabled on the Raspberry Pi
331 331  
332 - Run sudo raspi-config to open the config window
336 +Enable SPI and I2C first:
333 333  
334 -(% style="text-align:center" %)
335 -[[image:1651745476754-240.png||height="235" width="631"]]
338 +a)  SPI needs to be enabled on the Raspberry Pi
336 336  
340 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
337 337  
338 -(% style="text-align:center" %)
342 +[[image:1651745476754-240.png||height="234" width="629"]]
343 +
339 339  [[image:image-20220505181135-1.png]]
340 340  
341 -(% style="text-align:center" %)
342 -[[image:image-20220505181135-2.png]]
346 +[[image:image-20220505181135-2.png||height="229" width="622"]]
343 343  
344 344  
345 345  
350 +In RPI, Fist: Enter the root account:
346 346  
347 - In RPI , Fist: Enter root account:
352 +(((
353 +[[image:1651745583363-614.png||height="151" width="732"]]
348 348  
349 -(% style="text-align:center" %)
350 -[[image:1651745583363-614.png]]
355 +
356 +)))
351 351  
358 +and then run:
352 352  
353 - and then run:
360 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
354 354  
355 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
362 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
356 356  
357 - chmod +x ./auto_install.sh
364 +(% style="background-color:#dcdcdc" %)./auto_install.sh
358 358  
359 - ./auto_install.sh
366 +(((
367 +[[image:1651745611629-818.png||height="225" width="729"]]
368 +)))
360 360  
361 -(% style="text-align:center" %)
362 -[[image:1651745611629-818.png]]
370 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
363 363  
372 +You can get these output:
364 364  
365 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
366 -
367 - You can get these output:
368 -
369 -(% style="text-align:center" %)
374 +(((
370 370  [[image:1651745657252-173.png||height="426" width="621"]]
371 371  
372 372  
373 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
378 +
379 +)))
374 374  
375 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
381 +=== **5.2.2 Config Gateway ID, Frequency Band and Server address** ===
376 376  
377 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
378 378  
379 -(% style="text-align:center" %)
380 -[[image:1651745709709-887.png||height="820" width="621"]]
384 +(((
385 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
386 +)))
381 381  
388 +(((
389 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
382 382  
383 - User can find the TTN v3 server address from:
391 +
392 +)))
384 384  
385 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
394 +[[image:1651745709709-887.png||height="820" width="621"]]
386 386  
387 387  
388 - And the default frequency band is US915 in **global_conf.json** file.
397 +User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
389 389  
390 -(% style="text-align:center" %)
399 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
400 +
391 391  [[image:1651745838008-820.png||height="650" width="621"]]
392 392  
393 393  
394 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
404 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
395 395  
396 - 1).Chose your need the name of region frequency.
406 +**~ 1). Chose your need the name of region frequency.**
397 397  
398 -(% style="text-align:center" %)
399 -[[image:1651745867516-322.png]]
408 +[[image:1651745867516-322.png||height="83" width="740"]]
400 400  
401 401  
402 - 2). Use this command to copy it.
411 +*
412 +** 2). Use this command to copy it.
403 403  
404 404   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
405 405  
406 -(% style="text-align:center" %)
407 -[[image:1651745984006-868.png]]
416 +[[image:1651745984006-868.png||height="87" width="745"]]
408 408  
418 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
409 409  
410 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
420 +=== **5.2.3 Check result** ===
411 411  
412 -(% class="wikigeneratedid" %)
422 +
413 413  (((
414 -
424 +Run below command to restart the dragino_fwd:
415 415  )))
416 416  
417 -===== 5.2.3 Check result =====
427 +(((
428 +(% class="box infomessage" %)
429 +(((
430 +**sudo systemctl stop draginofwd**
431 +)))
418 418  
419 - Run below command to restart the dragino_fwd:
433 +(% class="box infomessage" %)
434 +(((
435 +**sudo systemctl start draginofwd**
436 +)))
437 +)))
420 420  
421 - sudo systemctl stop draginofwd
422 422  
423 - sudo systemctl start draginofwd
440 +(((
441 +debug check the ruing status of fwd:
442 +)))
424 424  
425 - debug check the ruing status of fwd:
444 +(((
445 +(% class="box infomessage" %)
446 +(((
447 +**sudo systemctl status draginofwd**
448 +)))
449 +)))
426 426  
427 - sudo systemctl status draginofwd
451 +[[image:1651746045057-414.png||height="193" width="729"]]
428 428  
429 -(% style="text-align:center" %)
430 -[[image:1651746045057-414.png]]
431 431  
432 432  
433 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
455 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
434 434  
435 -(% style="text-align:center" %)
457 +
436 436  [[image:1651746078253-168.png||height="372" width="621"]]
437 437  
438 438  
439 439  
440 - We can check dragino_fwd running states in RPi by running:
462 +We can check dragino_fwd running states in RPi by running:
441 441  
442 - //**sudo journalctl -u draginofwd -f**//
464 +(% class="box infomessage" %)
465 +(((
466 +**~ sudo journalctl -u draginofwd -f**
467 +)))
443 443  
444 -(% style="text-align:center" %)
445 -[[image:1651746111963-838.png]]
469 +[[image:1651746111963-838.png||height="184" width="730"]]
446 446  
447 447  
472 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
448 448  
449 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
450 -
451 -(% style="text-align:center" %)
452 452  [[image:1651746139304-966.png||height="326" width="621"]]
453 453  
454 454  
455 455  
456 -===== 5.2.4 Commands to handle service =====
478 +=== **5.2.4 Commands to handle service** ===
457 457  
458 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
459 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
460 -* **Start** dragino_fwd : sudo systemctl start draginofwd
461 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
462 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
463 463  
464 -=== 6. Order Info ===
481 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
482 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
483 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
484 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
485 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
465 465  
466 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
487 += **6. Order Info** =
467 467  
468 -**~ XX:**
469 469  
470 -* 868 (For Bands: EU868,IN865)
471 -* 915 (For Bands: US915,AU915,AS923,KR920)
472 -* 470 (For Band: CN470)
490 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
473 473  
474 -=== 7. Packing Info ===
492 +**~ (% style="color:#0000ff" %)XX:(%%)**
475 475  
476 -**~ PG1302 Package Includes**:
494 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
495 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
496 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
477 477  
498 +
499 += **7. Packing Info** =
500 +
501 +(((
502 +
503 +
504 +**PG1302 Package Includes**:
505 +)))
506 +
507 +(((
508 +(((
478 478  * PG1302 x 1
479 479  * LoRa Antenna x 1
511 +)))
512 +)))
480 480  
481 -**~ PG1302-PI Package Includes**:
514 +(((
515 +
482 482  
517 +
518 +**PG1302-PI Package Includes**:
519 +)))
520 +
483 483  * PG1302 x 1
484 484  * LoRa Antenna x 1
485 485  * RPi3/4 converter PCB
486 486  * Screws to hole converter PCB on RPI.
487 487  
488 -=== 8. Reference ===
526 +**PG1302-PI Dimension and weight: **
489 489  
490 -* Datasheet, User Manual & Software Download:
528 +* Device Size: 18 x 8 x 4 cm
529 +* Weight: 150g
491 491  
492 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
493 493  
532 +(((
533 += **8. Support** =
494 494  
495 -=== 9. Support ===
496 496  
497 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
498 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
536 +(((
537 +If you are experiencing issues and can't solve, you can send mail to
538 +)))
499 499  
500 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
540 +(((
541 +[[support@dragino.com>>mailto:support@dragino.com]]
542 +)))
543 +
544 +(((
545 +With your question as detail as possible. We will reply and help you in the shortest.
546 +)))
547 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0