Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 78.1 >
edited by Xiaoling
on 2022/05/06 15:21
To version < 99.3 >
edited by Xiaoling
on 2022/05/14 17:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,36 +3,27 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg||height="391" width="549"]]
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 12  **PG1302 LoRaWAN Concentrator User Manual**
13 13  
14 14  
9 +**Contents:**
15 15  
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
19 += 1. Introduction =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
21 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
31 31  
32 32  (((
33 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 34  )))
35 35  
36 36  (((
... ... @@ -41,14 +41,8 @@
41 41  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
42 42  )))
43 43  
44 -(((
45 -(((
46 -
47 -)))
48 -)))
35 +== 1.2 Features ==
49 49  
50 -==== 1.2 Features ====
51 -
52 52  * Base on Semtech SX1302 solution
53 53  * Support Raspberry Pi 3B/3B+/4
54 54  * Up to -140dBm sensitivity
... ... @@ -56,34 +56,28 @@
56 56  * Mini-PCIe Interface
57 57  * Converter board to support Raspberry Pi
58 58  
59 -==== 1.3 General Interfaces ====
44 +== 1.3 General Interfaces ==
60 60  
61 61  * SPI interface for LoRa
62 62  * Power Input: 5v, 1A
63 63  * 1 x I-PEX for LoRa
64 64  
65 -==== 1.4 Pin Mapping ====
50 +== 1.4 Pin Mapping ==
66 66  
67 67   [[image:1651743282627-547.png||height="402" width="425"]]
68 68  
54 +== 1.5 LEDs ==
69 69  
56 + TX: Blink when transmit a packet
57 + RX: Blink when receive a packet
58 + Config: Always ON
70 70  
71 -==== 1.5 LEDs ====
60 +== 1.6 Power Consumption ==
72 72  
73 - TX: Blink when transmit a packet
62 + TBD
74 74  
75 - RX: Blink when receive a packet
64 +== 1.7 Applications ==
76 76  
77 - Config: Always ON
78 -
79 -
80 -==== 1.6 Power Consumption ====
81 -
82 - TBD
83 -
84 -
85 -==== 1.7 Applications ====
86 -
87 87  * Smart Buildings & Home Automation
88 88  * Logistics and Supply Chain Management
89 89  * Smart Metering
... ... @@ -91,47 +91,38 @@
91 91  * Smart Cities
92 92  * Smart Factory
93 93  
94 -=== 2. Example: Set up as LoRaWAN gateway. ===
73 += 2. Example: Set up as LoRaWAN gateway. =
95 95  
96 -==== 2.1 System structure ====
75 +== 2.1 System structure ==
97 97  
98 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.Set up method for other server are similar.
77 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
99 99  
100 -(% style="text-align:center" %)
101 101  [[image:1651743698677-436.png||height="457" width="686"]]
102 102  
81 +== 2.2 Hardware Installation ==
103 103  
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
104 104  
105 -==== 2.2 Hardware Installation ====
106 -
107 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
108 -
109 -(% style="text-align:center" %)
110 110  [[image:1651743803032-803.png]]
111 111  
87 += 3. Install the software? =
112 112  
89 +There are two ways to install software in RPi4 to use PG1302.
113 113  
114 -=== 3. Install the software? ===
115 -
116 - There are two ways to install software in RPi4 to use PG1302.
117 -
118 118  * Flash SD card with Dragino pre-build image which support Web UI.
119 119  * Install lora packet forwarder in existing RPi OS.
120 120  
121 -=== 4. Flash with pre-build image ===
94 += 4. Flash with pre-build image =
122 122  
123 -==== 4.1 Download the dragino image for RPI ====
96 +== 4.1 Download the dragino image for RPI ==
124 124  
125 - Download PG1302_for_Rpi4_64_with_webui from
98 +Download PG1302_for_Rpi4_64_with_webui from
99 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
126 126  
127 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
101 +== 4.2 Flash the image to SD card ==
128 128  
103 +Flash the image to SD card:
129 129  
130 -==== 4.2 Flash the image to SD card ====
131 -
132 - Flash the image to SD card:
133 -
134 -(% style="text-align:center" %)
135 135  [[image:1651744119133-233.png||height="373" width="621"]]
136 136  
137 137   Note: Download the flash tool following this link
... ... @@ -138,361 +138,347 @@
138 138  
139 139   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
140 140  
111 +== 4.3 Access the Linux console ==
141 141  
142 -==== 4.3 Access the Linux console ====
113 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
143 143  
144 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
145 -
146 -Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
147 -
148 -(% style="text-align:center" %)
149 149  [[image:1651744193675-591.png||height="450" width="466"]]
150 150  
117 +The account details for Web Login are:
151 151  
152 - The account details for Web Login are:
119 +(((
120 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
121 +)))
153 153  
154 -**~ User Name: root**
123 +(((
124 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
125 +)))
155 155  
156 -**~ Password:   dragino**
127 +(((
128 +
129 +)))
157 157  
131 +(((
132 +**~ (% style="color:#0000ff" %)Backup account(%%)**
133 +)))
158 158  
159 -**~ Backup account**
135 +(((
136 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
137 +)))
160 160  
161 -**~ Pi/dragino**
139 +After log in, you will be in the Linux console and type command here.
162 162  
163 -
164 - After log in, you will be in the Linux console and type command here.
165 -
166 -(% style="text-align:center" %)
167 167  [[image:1651744358515-107.png||height="366" width="581"]]
168 168  
143 +== 4.4 Access the WebUI of RPi4. ==
169 169  
170 -==== 4.4 Access the WebUI of RPi4. ====
145 +=== 4.4.1 Home page ===
171 171  
172 -===== 4.4.1 Home page =====
147 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
148 +You will see the login interface of RPI as shown below.
149 +The account details for Web Login are:
173 173  
174 - Open a browser on the PC and type the RPI ip address
151 +(((
152 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
153 +(% style="color:#0000ff" %)** Password:   dragino**
154 +)))
175 175  
176 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
177 -
178 -
179 - You will see the login interface of RPI as shown below.
180 -
181 - The account details for Web Login are:
182 -
183 -**~ User Name: root**
184 -
185 -**~ Password:   dragino**
186 -
187 -(% style="text-align:center" %)
188 188  [[image:1651744457761-993.png||height="352" width="621"]]
189 189  
158 +=== 4.4.2 LoRa Page ===
190 190  
191 -===== 4.4.2 LoRa Page =====
160 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
192 192  
193 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
194 -
195 -(% style="text-align:center" %)
196 196  [[image:1651744554845-970.png||height="328" width="621"]]
197 197  
164 +Different PG1302 hardware version can support different frequency range:
198 198  
199 - Different PG1302 hardware version can support different frequency range:
166 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
200 200  
201 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
168 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
202 202  
203 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
170 +After user choose the frequency plan, he can see the actually frequency in used by checking the
204 204  
172 +page LogRead ~-~-> LoRa Log
205 205  
206 - After user choose the frequency plan, he can see the actually frequency in used by checking the
174 +Note *: See this instruction for how to customize frequency band
207 207  
208 - page LogRead ~-~-> LoRa Log
176 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
209 209  
210 - Note *: See this instruction for how to customize frequency band
178 +=== 4.4.3 LoRaWAN Page ===
211 211  
212 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
180 +==== 4.4.3.1 Semtech UDP ====
213 213  
214 -
215 -===== 4.4.3 LoRaWAN Page =====
216 -
217 -====== 4.4.3.1 Semtech UDP ======
218 -
219 -
220 -(% style="text-align:center" %)
221 221  [[image:1651744767914-283.png||height="352" width="621"]]
222 222  
184 +Note *: See this instruction for how to configure TTN.
223 223  
186 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
224 224  
225 - Note *: See this instruction for how to configure TTN.
188 +==== 4.4.3.2 Basic Station ====
226 226  
227 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
228 -
229 -
230 -====== 4.4.3.2 Basic Station ======
231 -
232 -(% style="text-align:center" %)
233 233  [[image:1651744890629-683.png||height="380" width="621"]]
234 234  
192 +Note *: See this instruction for how to configure TTN.
235 235  
236 - Note *: See this instruction for how to configure TTN.
194 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
237 237  
238 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
196 +=== 4.4.4 LogRead ===
239 239  
198 +==== 4.4.4.1 LoRa Log ====
240 240  
241 -===== 4.4.4 LogRead =====
242 -
243 -====== 4.4.4.1 LoRa Log ======
244 -
245 -(% style="text-align:center" %)
246 246  [[image:1651744955955-452.png||height="571" width="621"]]
247 247  
202 +Show the frequency for LoRa Radio and traffics.
248 248  
249 - Show the frequency for LoRa Radio and traffics.
204 +==== 4.4.4.2 System Log ====
250 250  
206 +Show system log.
251 251  
252 -====== 4.4.4.2 System Log ======
253 -
254 - Show system log.
255 -
256 -(% style="text-align:center" %)
257 257  [[image:1651745003470-264.png||height="477" width="621"]]
258 258  
210 +==== 4.4.4.3 Record Log ====
259 259  
212 +**Record the system log.**
260 260  
261 -====== 4.4.4.3 Record Log ======
262 -
263 -**~ Record the system log.**
264 -
265 -(% style="text-align:center" %)
266 266  [[image:1651745069814-662.png||height="144" width="621"]]
267 267  
216 += 5. Install stand alone LoRa Packet Forwarder. =
268 268  
269 -=== 5. Install stand alone LoRa Packet Forwarder. ===
218 +== 5.1 OS requirement ==
270 270  
271 -==== 5.1 OS requirement ====
220 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
272 272  
273 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
274 -
275 - pi@raspberrypi:~~$ cat /etc/os-release
276 -
222 +(% class="box" %)
223 +(((
224 + pi@raspberrypi:~~$ cat /etc/os-release
277 277   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
278 -
279 279   NAME="Raspbian GNU/Linux"
280 -
281 281   VERSION_ID="8"
282 -
283 283   VERSION="8 (jessie)"
284 -
285 285   ID=raspbian
286 -
287 287   ID_LIKE=debian
288 -
289 289   HOME_URL="http:~/~/www.raspbian.org/"
290 -
291 291   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
292 -
293 293   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
234 +)))
294 294  
236 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
295 295  
296 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
238 +In RPI, run below command to get a Gateway ID
297 297  
298 - In RPI, run below command to get a Gateway ID
240 +(% class="box infomessage" %)
241 +(((
242 + ifconfig eth0
243 +)))
299 299  
300 - ifconfig eth0
301 -
302 -(% style="text-align:center" %)
303 303  [[image:1651745210205-512.png||height="130" width="621"]]
304 304  
247 +(((
248 +(((
249 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
250 +)))
251 +)))
305 305  
306 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
307 -
308 - Make sure to select legacy packet forwarder.
309 -
310 -(% style="text-align:center" %)
311 311  [[image:1651745267862-321.png||height="526" width="621"]]
312 312  
313 -
314 -
315 -(% style="text-align:center" %)
316 316  [[image:1651745306744-481.png||height="478" width="621"]]
317 317  
318 318  After set up, the status should show not connected as below:
319 319  
320 -(% style="text-align:center" %)
321 321  [[image:1651745366987-458.png||height="363" width="621"]]
322 322  
261 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
323 323  
324 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
263 +Enable SPI and I2C first:
325 325  
326 - Enable SPI and I2C first:
265 +a)SPI needs to be enabled on the Raspberry Pi
327 327  
328 - a)SPI needs to be enabled on the Raspberry Pi
267 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
329 329  
330 - Run sudo raspi-config to open the config window
269 +[[image:1651745476754-240.png||height="234" width="629"]]
331 331  
332 -(% style="text-align:center" %)
333 -[[image:1651745476754-240.png||height="235" width="631"]]
334 -
335 -
336 -(% style="text-align:center" %)
337 337  [[image:image-20220505181135-1.png]]
338 338  
339 -(% style="text-align:center" %)
340 -[[image:image-20220505181135-2.png]]
273 +[[image:image-20220505181135-2.png||height="229" width="622"]]
341 341  
275 +In RPI , Fist: Enter root account:
342 342  
277 +(((
278 +[[image:1651745583363-614.png||height="151" width="732"]]
279 +)))
343 343  
281 +and then run:
344 344  
345 - In RPI , Fist: Enter root account:
283 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
346 346  
347 -(% style="text-align:center" %)
348 -[[image:1651745583363-614.png]]
285 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
349 349  
287 +(% style="background-color:#dcdcdc" %)./auto_install.sh
350 350  
351 - and then run:
289 +(((
290 +[[image:1651745611629-818.png||height="225" width="729"]]
291 +)))
352 352  
353 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
293 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
354 354  
355 - chmod +x ./auto_install.sh
295 +You can get these output:
356 356  
357 - ./auto_install.sh
358 -
359 -(% style="text-align:center" %)
360 -[[image:1651745611629-818.png]]
361 -
362 -
363 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
364 -
365 - You can get these output:
366 -
367 -(% style="text-align:center" %)
297 +(((
368 368  [[image:1651745657252-173.png||height="426" width="621"]]
299 +)))
369 369  
301 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
370 370  
371 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
303 +(((
304 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
305 +)))
372 372  
373 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
307 +(((
308 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
309 +)))
374 374  
375 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
376 -
377 -(% style="text-align:center" %)
378 378  [[image:1651745709709-887.png||height="820" width="621"]]
379 379  
313 +User can find the TTN v3 server address from:
380 380  
381 - User can find the TTN v3 server address from:
315 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
382 382  
383 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
317 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
384 384  
385 -
386 - And the default frequency band is US915 in **global_conf.json** file.
387 -
388 -(% style="text-align:center" %)
389 389  [[image:1651745838008-820.png||height="650" width="621"]]
390 390  
321 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
391 391  
392 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
323 + 1).Chose your need the name of region frequency.
393 393  
394 - 1).Chose your need the name of region frequency.
325 +[[image:1651745867516-322.png||height="83" width="740"]]
395 395  
396 -(% style="text-align:center" %)
397 -[[image:1651745867516-322.png]]
398 -
399 -
400 400   2). Use this command to copy it.
401 401  
402 402   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
403 403  
404 -(% style="text-align:center" %)
405 -[[image:1651745984006-868.png]]
331 +[[image:1651745984006-868.png||height="87" width="745"]]
406 406  
333 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
407 407  
408 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
335 +=== 5.2.3 Check result ===
409 409  
410 -(% class="wikigeneratedid" %)
411 411  (((
412 -
338 +Run below command to restart the dragino_fwd:
413 413  )))
414 414  
415 -===== 5.2.3 Check result =====
341 +(((
342 +(% class="box infomessage" %)
343 +(((
344 +sudo systemctl stop draginofwd
345 +)))
416 416  
417 - Run below command to restart the dragino_fwd:
347 +(% class="box infomessage" %)
348 +(((
349 +sudo systemctl start draginofwd
350 +)))
351 +)))
418 418  
419 - sudo systemctl stop draginofwd
353 +(((
354 +debug check the ruing status of fwd:
355 +)))
420 420  
421 - sudo systemctl start draginofwd
357 +(((
358 +(% class="box infomessage" %)
359 +(((
360 +sudo systemctl status draginofwd
361 +)))
362 +)))
422 422  
423 - debug check the ruing status of fwd:
364 +[[image:1651746045057-414.png||height="193" width="729"]]
424 424  
425 - sudo systemctl status draginofwd
366 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
426 426  
427 -(% style="text-align:center" %)
428 -[[image:1651746045057-414.png]]
429 -
430 -
431 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
432 -
433 -(% style="text-align:center" %)
434 434  [[image:1651746078253-168.png||height="372" width="621"]]
435 435  
436 436  
371 +We can check dragino_fwd running states in RPi by running:
437 437  
438 - We can check dragino_fwd running states in RPi by running:
373 +(% class="box infomessage" %)
374 +(((
375 +*
376 +** sudo journalctl -u draginofwd -f
377 +)))
439 439  
440 - //**sudo journalctl -u draginofwd -f**//
379 +[[image:1651746111963-838.png||height="184" width="730"]]
441 441  
442 -(% style="text-align:center" %)
443 -[[image:1651746111963-838.png]]
381 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
444 444  
445 -
446 -
447 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
448 -
449 -(% style="text-align:center" %)
450 450  [[image:1651746139304-966.png||height="326" width="621"]]
451 451  
385 +=== 5.2.4 Commands to handle service ===
452 452  
387 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
388 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
389 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
390 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
391 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
453 453  
454 -===== 5.2.4 Commands to handle service =====
393 += 6. Order Info =
455 455  
456 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
457 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
458 -* **Start** dragino_fwd : sudo systemctl start draginofwd
459 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
460 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
395 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
461 461  
462 -=== 6. Order Info ===
397 +**~ (% style="color:#0000ff" %)XX:(%%)**
463 463  
464 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
399 +* (% style="color:#0000ff" %)868 (%%)(For Bands: EU868,IN865)
400 +* (% style="color:#0000ff" %)915 (%%)(For Bands: US915,AU915,AS923,KR920)
401 +* (% style="color:#0000ff" %)470 (%%)(For Band: CN470)
465 465  
466 -**~ XX:**
403 += 7. Packing Info =
467 467  
468 -* 868 (For Bands: EU868,IN865)
469 -* 915 (For Bands: US915,AU915,AS923,KR920)
470 -* 470 (For Band: CN470)
405 +(((
406 +**PG1302 Package Includes**:
407 +)))
471 471  
472 -=== 7. Packing Info ===
409 +(((
410 +* (((
411 +PG1302 x 1
412 +)))
413 +* (((
414 +LoRa Antenna x 1
415 +)))
416 +)))
473 473  
474 -**~ PG1302 Package Includes**:
418 +(((
419 +
420 +)))
475 475  
476 -* PG1302 x 1
477 -* LoRa Antenna x 1
422 +(((
423 +**PG1302-PI Package Includes**:
424 +)))
478 478  
479 -**~ PG1302-PI Package Includes**:
426 +* (((
427 +PG1302 x 1
428 +)))
429 +* (((
430 +LoRa Antenna x 1
431 +)))
432 +* (((
433 +RPi3/4 converter PCB
434 +)))
480 480  
481 -* PG1302 x 1
482 -* LoRa Antenna x 1
483 -* RPi3/4 converter PCB
484 -* Screws to hole converter PCB on RPI.
436 +(((
437 +* (((
438 +Screws to hole converter PCB on RPI.
439 +)))
485 485  
486 -=== 8. Reference ===
441 += 8. Support =
487 487  
488 -* Datasheet, User Manual & Software Download:
443 +(((
444 +If you are experiencing issues and can’t solve, you can send mail to
445 +)))
489 489  
490 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
447 +(((
448 +[[support@dragino.com>>mailto:support@dragino.com]]
449 +)))
491 491  
492 -
493 -=== 9. Support ===
494 -
495 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
496 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
497 -
498 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
451 +(((
452 +With your question as detail as possible. We will reply and help you in the shortest.
453 +)))
454 +)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0