Skip to Content
Last modified by Kilight Cao on 2024/06/22 10:43
From version 78.1
edited by Xiaoling
on 2022/05/06 15:21
Change comment: There is no comment for this version
To version 125.1
edited by Xiaoye
on 2023/03/29 20:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,89 +3,82 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
10 -
11 -
12 -**PG1302 LoRaWAN Concentrator User Manual**
13 -
14 -
15 -
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
17 += 1. Introduction =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
31 31  
32 -(((
33 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 -)))
35 35  
36 36  (((
37 -The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
23 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
38 38  )))
39 39  
40 40  (((
41 -PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
27 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
42 42  )))
43 43  
44 44  (((
45 -(((
46 -
31 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
47 47  )))
48 -)))
49 49  
50 -==== 1.2 Features ====
51 51  
35 +== 1.2 Features ==
36 +
37 +
52 52  * Base on Semtech SX1302 solution
53 -* Support Raspberry Pi 3B/3B+/4
39 +* Support Raspberry Pi 3B/3B+/4, TinkerBoard2/2S, Orange Pi Pc/PC PLUS.
54 54  * Up to -140dBm sensitivity
55 55  * Support 3.3v and 5v.
56 56  * Mini-PCIe Interface
57 57  * Converter board to support Raspberry Pi
58 58  
59 -==== 1.3 General Interfaces ====
45 +== 1.3 General Interfaces for PG1302 ==
60 60  
47 +
61 61  * SPI interface for LoRa
62 62  * Power Input: 5v, 1A
63 63  * 1 x I-PEX for LoRa
51 +* Working Temperature: -40 ℃ ~~ 80℃
64 64  
65 -==== 1.4 Pin Mapping ====
53 +== 1.4 Pin Mapping ==
66 66  
55 +
67 67   [[image:1651743282627-547.png||height="402" width="425"]]
68 68  
69 69  
59 +== 1.5 LEDs ==
70 70  
71 -==== 1.5 LEDs ====
72 72  
73 - TX: Blink when transmit a packet
62 +(((
63 +TX: Blink when transmit a packet
64 +RX: Blink when receive a packet
65 +Config: Always ON
66 +)))
74 74  
75 - RX: Blink when receive a packet
76 76  
77 - Config: Always ON
69 +== 1.6 Power Consumption ==
78 78  
79 79  
80 -==== 1.6 Power Consumption ====
72 +<300mA @ 3.3v.
81 81  
82 - TBD
74 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
83 83  
84 84  
85 -==== 1.7 Applications ====
77 +== 1.7 Applications ==
86 86  
79 +
87 87  * Smart Buildings & Home Automation
88 88  * Logistics and Supply Chain Management
89 89  * Smart Metering
... ... @@ -91,408 +91,600 @@
91 91  * Smart Cities
92 92  * Smart Factory
93 93  
94 -=== 2. Example: Set up as LoRaWAN gateway. ===
87 += 2. Example: Set up as LoRaWAN gateway =
95 95  
96 -==== 2.1 System structure ====
89 +== 2.1 System structure ==
97 97  
98 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.Set up method for other server are similar.
99 99  
100 -(% style="text-align:center" %)
92 +(((
93 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
94 +
95 +
96 +)))
97 +
101 101  [[image:1651743698677-436.png||height="457" width="686"]]
102 102  
103 103  
101 +== 2.2 Hardware Installation ==
104 104  
105 -==== 2.2 Hardware Installation ====
106 106  
107 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
104 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
108 108  
109 -(% style="text-align:center" %)
110 -[[image:1651743803032-803.png]]
106 +[[image:image-20220621104746-1.png||height="381" width="451"]]
111 111  
112 112  
109 += 3. Install the software? =
113 113  
114 -=== 3. Install the software? ===
115 115  
116 - There are two ways to install software in RPi4 to use PG1302.
112 +**Raspberry Pi 3B/3B+/4,**
117 117  
118 -* Flash SD card with Dragino pre-build image which support Web UI.
119 -* Install lora packet forwarder in existing RPi OS.
114 +* Flash SD card with Dragino pre-build image which supports Web UI.
115 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in existing RPi OS.
120 120  
121 -=== 4. Flash with pre-build image ===
117 +**TinkerBoard2/2S, **
122 122  
123 -==== 4.1 Download the dragino image for RPI ====
119 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
124 124  
125 - Download PG1302_for_Rpi4_64_with_webui from
121 +**Orange Pi PC/PC PLUS.**
126 126  
127 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
123 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
128 128  
125 += 4. Flash with pre-build image =
129 129  
130 -==== 4.2 Flash the image to SD card ====
127 +== 4.1 Download the dragino image for RPI ==
131 131  
132 - Flash the image to SD card:
133 133  
134 -(% style="text-align:center" %)
135 -[[image:1651744119133-233.png||height="373" width="621"]]
130 +(((
131 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
132 +)))
136 136  
137 - Note: Download the flash tool following this link
138 138  
139 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
135 +== 4.2 Flash the image to an SD card ==
140 140  
141 141  
142 -==== 4.3 Access the Linux console ====
138 +Flash the image to the SD card:
143 143  
144 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
140 +[[image:1651744119133-233.png||height="373" width="621"]]
145 145  
146 -Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
147 147  
148 -(% style="text-align:center" %)
149 -[[image:1651744193675-591.png||height="450" width="466"]]
143 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
150 150  
151 151  
152 - The account details for Web Login are:
146 +== 4.3 Access the Linux console ==
153 153  
154 -**~ User Name: root**
155 155  
156 -**~ Password:   dragino**
149 +(((
150 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
151 +)))
157 157  
158 158  
159 -**~ Backup account**
154 +[[image:1651744193675-591.png||height="450" width="466"]]
160 160  
161 -**~ Pi/dragino**
156 +The account details for Web Login are:
162 162  
158 +(((
159 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
160 +)))
163 163  
164 - After log in, you will be in the Linux console and type command here.
162 +(((
163 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
164 +)))
165 165  
166 -(% style="text-align:center" %)
167 -[[image:1651744358515-107.png||height="366" width="581"]]
166 +(((
167 +
168 +)))
168 168  
170 +(((
171 +**~ (% style="color:#0000ff" %)Backup account(%%)**
172 +)))
169 169  
170 -==== 4.4 Access the WebUI of RPi4. ====
174 +(((
175 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
171 171  
172 -===== 4.4.1 Home page =====
177 +
178 +)))
173 173  
174 - Open a browser on the PC and type the RPI ip address
180 +After logging in, you will be in the Linux console and type the command here.
175 175  
176 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
182 +[[image:1651744358515-107.png||height="366" width="581"]]
177 177  
178 178  
179 - You will see the login interface of RPI as shown below.
185 +== 4.4 Access the WebUI of RPi4 ==
180 180  
181 - The account details for Web Login are:
187 +=== 4.4.1 Home page ===
182 182  
183 -**~ User Name: root**
184 184  
185 -**~ Password:   dragino**
190 +(((
191 +Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
192 +You will see the login interface of RPI as shown below.
193 +The account details for Web Login are:
194 +)))
186 186  
187 -(% style="text-align:center" %)
188 -[[image:1651744457761-993.png||height="352" width="621"]]
196 +(((
197 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
198 +(% style="color:#0000ff" %)** Password:   dragino**
189 189  
200 +
201 +)))
190 190  
191 -===== 4.4.2 LoRa Page =====
203 +[[image:1651744457761-993.png||height="352" width="621"]]
192 192  
193 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
194 194  
195 -(% style="text-align:center" %)
196 -[[image:1651744554845-970.png||height="328" width="621"]]
206 +=== 4.4.2 LoRa Page ===
197 197  
198 198  
199 - Different PG1302 hardware version can support different frequency range:
209 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
200 200  
201 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
202 202  
203 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
212 +[[image:1651744554845-970.png||height="328" width="621"]]
204 204  
205 205  
206 - After user choose the frequency plan, he can see the actually frequency in used by checking the
215 +Different PG1302 hardware version can support different frequency range:
207 207  
208 - page LogRead ~-~-> LoRa Log
217 +* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
218 +* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
209 209  
210 - Note *: See this instruction for how to customize frequency band
220 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
211 211  
212 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
222 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
213 213  
214 214  
215 -===== 4.4.3 LoRaWAN Page =====
225 +=== 4.4.3 LoRaWAN Page ===
216 216  
217 -====== 4.4.3.1 Semtech UDP ======
227 +==== 4.4.3.1 Semtech UDP ====
218 218  
219 219  
220 -(% style="text-align:center" %)
221 221  [[image:1651744767914-283.png||height="352" width="621"]]
222 222  
223 223  
233 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
224 224  
225 - Note *: See this instruction for how to configure TTN.
226 226  
227 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
236 +==== 4.4.3.2 Basic Station ====
228 228  
229 229  
230 -====== 4.4.3.2 Basic Station ======
231 -
232 -(% style="text-align:center" %)
233 233  [[image:1651744890629-683.png||height="380" width="621"]]
234 234  
235 235  
236 - Note *: See this instruction for how to configure TTN.
242 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
237 237  
238 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
239 239  
245 +=== 4.4.4 LogRead ===
240 240  
241 -===== 4.4.4 LogRead =====
247 +==== 4.4.4.1 LoRa Log ====
242 242  
243 -====== 4.4.4.1 LoRa Log ======
244 244  
245 -(% style="text-align:center" %)
246 246  [[image:1651744955955-452.png||height="571" width="621"]]
247 247  
248 248  
249 - Show the frequency for LoRa Radio and traffics.
253 +Show the frequency for LoRa Radio and traffics.
250 250  
251 251  
252 -====== 4.4.4.2 System Log ======
256 +==== 4.4.4.2 System Log ====
253 253  
254 - Show system log.
255 255  
256 -(% style="text-align:center" %)
259 +Show system log.
260 +
261 +
257 257  [[image:1651745003470-264.png||height="477" width="621"]]
258 258  
259 259  
265 +==== 4.4.4.3 Record Log ====
260 260  
261 -====== 4.4.4.3 Record Log ======
262 262  
263 -**~ Record the system log.**
268 +**Record the system log.**
264 264  
265 -(% style="text-align:center" %)
270 +
266 266  [[image:1651745069814-662.png||height="144" width="621"]]
267 267  
268 268  
269 -=== 5. Install stand alone LoRa Packet Forwarder. ===
274 += 5. Install stand-alone LoRa Packet Forwarder =
270 270  
271 -==== 5.1 OS requirement ====
276 +== 5.1 Choose the right installation package for your OS ==
272 272  
273 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
274 274  
275 - pi@raspberrypi:~~$ cat /etc/os-release
279 +(((
280 +**draginofwd-32bit (RPI, Orange PI)**
276 276  
277 - PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
282 +**Download URL:** https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb
278 278  
279 - NAME="Raspbian GNU/Linux"
284 +**Linux Command:** wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
280 280  
281 - VERSION_ID="8"
282 282  
283 - VERSION="8 (jessie)"
287 +**dragino-64bit (RPI, Orange PI)**
284 284  
285 - ID=raspbian
289 +**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb
290 +)))
286 286  
287 - ID_LIKE=debian
292 +**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
288 288  
289 - HOME_URL="http:~/~/www.raspbian.org/"
290 290  
291 - SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
295 +**dragino-tiker-32bit (Tinker Board)**
292 292  
297 +**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb
298 +
299 +**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
300 +
301 +
302 +**Install details:**
303 +
304 +[[image:image-20220928181226-1.png||height="218" width="1100"]]
305 +
306 +
307 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
308 +
309 +(% class="box" %)
310 +(((
311 + pi@raspberrypi:~~$ cat /etc/os-release
312 + PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
313 + NAME="Raspbian GNU/Linux"
314 + VERSION_ID="8"
315 + VERSION="8 (jessie)"
316 + ID=raspbian
317 + ID_LIKE=debian
318 + HOME_URL="http:~/~/www.raspbian.org/"
319 + SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
293 293   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
294 294  
322 +
323 +)))
295 295  
296 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
297 297  
298 - In RPI, run below command to get a Gateway ID
326 +== 5.2 Select the mode of connection to the server ==
299 299  
300 - ifconfig eth0
301 301  
302 -(% style="text-align:center" %)
329 +The Dragino LoRa Packet Forware supports the Semtech UDP and Basic Station mode.
330 +
331 +The User can choose one of the methods as the connection mode.
332 +
333 +
334 +**~1. Semtech UDP Mode  ~-~-> 5.2.1**
335 +
336 +**2. Basic Station Mode  ~-~-> 5.2.2**
337 +
338 +
339 +=== 5.2.1 Semtech UDP Mode ===
340 +
341 +
342 +==== a). Get a gateway EUI from the device ETH MAC. ====
343 +
344 +
345 +In RPI, run the below command to get a Gateway ID
346 +
347 +(% class="box infomessage" %)
348 +(((
349 +**~ ifconfig eth0**
350 +)))
351 +
303 303  [[image:1651745210205-512.png||height="130" width="621"]]
304 304  
305 305  
306 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
355 +(((
356 +(((
357 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
307 307  
308 - Make sure to select legacy packet forwarder.
309 309  
310 -(% style="text-align:center" %)
311 -[[image:1651745267862-321.png||height="526" width="621"]]
312 312  
361 +==== b). Input this Gateway EUI to the TTN-Stack ====
362 +)))
363 +)))
313 313  
365 +[[image:1651745267862-321.png||height="526" width="621"]]
314 314  
315 -(% style="text-align:center" %)
316 316  [[image:1651745306744-481.png||height="478" width="621"]]
317 317  
318 -After set up, the status should show not connected as below:
319 319  
320 -(% style="text-align:center" %)
370 +==== c). After Register, the status should show not connected as below: ====
371 +
321 321  [[image:1651745366987-458.png||height="363" width="621"]]
322 322  
323 323  
324 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
375 +==== d). Enable SPI and I2C on your device ====
325 325  
326 - Enable SPI and I2C first:
377 +**the below example is using Raspberry 4B.**
327 327  
328 - a)SPI needs to be enabled on the Raspberry Pi
329 329  
330 - Run sudo raspi-config to open the config window
380 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
331 331  
332 -(% style="text-align:center" %)
333 -[[image:1651745476754-240.png||height="235" width="631"]]
382 +[[image:1651745476754-240.png||height="234" width="629"]]
334 334  
335 335  
336 -(% style="text-align:center" %)
337 337  [[image:image-20220505181135-1.png]]
338 338  
339 -(% style="text-align:center" %)
340 -[[image:image-20220505181135-2.png]]
341 341  
388 +[[image:image-20220505181135-2.png||height="229" width="622"]]
342 342  
343 343  
344 344  
345 - In RPI , Fist: Enter root account:
392 +==== e). Access the root account: ====
346 346  
347 -(% style="text-align:center" %)
348 -[[image:1651745583363-614.png]]
394 +(((
395 +[[image:1651745583363-614.png||height="151" width="732"]]
349 349  
397 +
398 +)))
350 350  
351 - and then run:
400 +==== f). Modify the configuration of FWD ====
352 352  
353 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
354 354  
355 - chmod +x ./auto_install.sh
403 +(((
404 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
405 +)))
356 356  
357 - ./auto_install.sh
407 +(((
408 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
358 358  
359 -(% style="text-align:center" %)
360 -[[image:1651745611629-818.png]]
361 361  
411 +the User can find the lora configuration directory in (% style="color:#0000ff" %)**/etc/lora/**(%%) there are the cfg-302 directory and the global_conf.json, and local_conf.json files.
362 362  
363 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
413 +/etc/lora/
414 +├── cfg-302  ~-~--> global configuration file
415 +├── devskey  ~-~--> Database
416 +├── global_conf.json  ~-~--> Frequency plan for current applications
417 +└── local_conf.json  ~-~--> Local fwd configuration
364 364  
365 - You can get these output:
419 +At default, the users need to change two configurations file: global_conf.json and local_conf.json.
366 366  
367 -(% style="text-align:center" %)
368 -[[image:1651745657252-173.png||height="426" width="621"]]
421 +===== **1.) Configure gateway EUI and server address, port for fwd** =====
369 369  
423 +
424 +)))
370 370  
371 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
372 -
373 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
374 -
375 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
376 -
377 -(% style="text-align:center" %)
378 378  [[image:1651745709709-887.png||height="820" width="621"]]
379 379  
380 380  
381 - User can find the TTN v3 server address from:
429 +**Note: Users can find the TTN v3 server address from [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]**
382 382  
383 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
384 384  
432 +===== **2). Override the global_conf.json file by selecting the appropriate frequency plan for your region in cfg-302** =====
385 385  
386 - And the default frequency band is US915 in **global_conf.json** file.
387 387  
388 -(% style="text-align:center" %)
435 +the default frequency band is US915 in the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
436 +
389 389  [[image:1651745838008-820.png||height="650" width="621"]]
390 390  
391 391  
392 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
440 +If the user wants to change to other frequency bands, the User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
393 393  
394 - 1).Chose your need the name of region frequency.
442 +**//eg: cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json //**
395 395  
396 -(% style="text-align:center" %)
397 -[[image:1651745867516-322.png]]
398 398  
399 399  
400 - 2). Use this command to copy it.
446 +====== **Selecting the appropriate frequency plan for your region in cfg-302.** ======
401 401  
402 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
448 +[[image:1651745867516-322.png||height="83" width="740"]]
403 403  
404 -(% style="text-align:center" %)
405 -[[image:1651745984006-868.png]]
406 406  
451 +====== **Override the global_conf.json** ======
407 407  
408 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
409 -
410 -(% class="wikigeneratedid" %)
453 +(% class="box infomessage" %)
411 411  (((
412 -
455 +**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
413 413  )))
414 414  
415 -===== 5.2.3 Check result =====
458 +[[image:1651745984006-868.png||height="87" width="745"]]
416 416  
417 - Run below command to restart the dragino_fwd:
418 418  
419 - sudo systemctl stop draginofwd
461 +==== (% style="color:inherit; font-family:inherit; font-size:23px" %)g). Running the Fwd Server(%%) ====
420 420  
421 - sudo systemctl start draginofwd
422 422  
423 - debug check the ruing status of fwd:
464 +(((
465 +Run the below command to restart the dragino_fwd:
466 +)))
424 424  
425 - sudo systemctl status draginofwd
468 +(((
469 +(% class="box infomessage" %)
470 +(((
471 +**sudo systemctl start draginofwd**
472 +)))
473 +)))
426 426  
427 -(% style="text-align:center" %)
428 -[[image:1651746045057-414.png]]
475 +(((
476 +debug check the ruing status of fwd:
477 +)))
429 429  
479 +(((
480 +(% class="box infomessage" %)
481 +(((
482 +**sudo systemctl status draginofwd**
483 +)))
484 +)))
430 430  
431 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
486 +[[image:1651746045057-414.png||height="193" width="729"]]
432 432  
433 -(% style="text-align:center" %)
488 +
489 +Wait for a few minutes, the gateway will be online/active on the TTN-Stack.
490 +
434 434  [[image:1651746078253-168.png||height="372" width="621"]]
435 435  
436 436  
437 437  
438 - We can check dragino_fwd running states in RPi by running:
495 +Get the draginofwd real-time running log:
439 439  
440 - //**sudo journalctl -u draginofwd -f**//
497 +(% class="box infomessage" %)
498 +(((
499 +**~ sudo journalctl -u draginofwd -f**
500 +)))
441 441  
442 -(% style="text-align:center" %)
443 -[[image:1651746111963-838.png]]
502 +[[image:1651746111963-838.png||height="184" width="730"]]
444 444  
445 445  
446 446  
447 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
506 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
448 448  
449 -(% style="text-align:center" %)
450 450  [[image:1651746139304-966.png||height="326" width="621"]]
451 451  
452 452  
511 +==== h). Commands to handle service ====
453 453  
454 -===== 5.2.4 Commands to handle service =====
513 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
514 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
515 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
516 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
517 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
455 455  
456 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
457 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
458 -* **Start** dragino_fwd : sudo systemctl start draginofwd
459 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
460 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
519 +=== **5.2.2 Basic Station Mode.** ===
461 461  
462 -=== 6. Order Info ===
463 463  
464 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
522 +==== a). Get a gateway EUI from the device ETH MAC. ====
465 465  
466 -**~ XX:**
467 467  
468 -* 868 (For Bands: EU868,IN865)
469 -* 915 (For Bands: US915,AU915,AS923,KR920)
470 -* 470 (For Band: CN470)
525 +In RPI, run the below command to get a Gateway EUI
471 471  
472 -=== 7. Packing Info ===
527 +(% class="box infomessage" %)
528 +(((
529 +**~ ifconfig eth0**
530 +)))
473 473  
474 -**~ PG1302 Package Includes**:
532 +[[image:1651745210205-512.png||height="130" width="621"]]
475 475  
534 +
535 +(((
536 +(((
537 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
538 +)))
539 +)))
540 +
541 +
542 +
543 +
544 +==== b). Register the gateway with the Basic Station Mode on the TTN-Stack ====
545 +
546 +[[image:image-20230329164417-5.png]]
547 +
548 +
549 +
550 +
551 +==== c). Download the gateway API keys, and then upload them to the gateway. ====
552 +
553 +
554 +[[image:image-20230329164704-6.png]]
555 +
556 +
557 +==== d). The status Shows disconnect. ====
558 +
559 +[[image:image-20230329165619-7.png||height="568" width="948"]]
560 +
561 +
562 +==== e.) Uploda API keys into the gateway ====
563 +
564 +the User can find the Basic Station configuration directory in (% style="color:#0000ff" %)**/etc/station/**(%%) there is the station.conf files, and ttnstack directory.
565 +
566 +//**directory tree:**//
567 +
568 +///etc/station/
569 +├── station.conf 
570 +└── ttnstack  ~-~--> ** ttnstack configuration file directory**
571 + ├── cups.trust  ~-~-->  ttnstack auth file
572 + ├── cups.uri  ~-~-->  ttnstack server URI file
573 + └── station.conf  ~-~-~-~-> backup configuration file//
574 +
575 +
576 +
577 +**and then upload the downloaded keys to this directory((% style="color:#0000ff" %)/etc/station/(%%))**
578 +
579 +eg:
580 +
581 +/etc/station/
582 +├── cups.key  ~-~--> uploaded by you
583 +├── lns.key  ~-~--> uploaded by you
584 +├── station.conf
585 +
586 +
587 +==== f). Configure gateway EUI and server address ====
588 +
589 +
590 +[[image:image-20230329195650-10.png]]
591 +
592 +
593 +After the user enters the correct parameters, the server will be run automatically
594 +
595 +
596 +Tree Directory:
597 +
598 +/etc/station/
599 +├── cups.key
600 +├── cups.trust
601 +├── cups.uri
602 +├── lns.key
603 +├── start-configure.sh
604 +├── station.conf
605 +└── ttnstack
606 + ├── cups.trust
607 + ├── cups.uri
608 + └── station.conf
609 +
610 +
611 +==== g). Check station running log ====
612 +
613 +
614 +tail -f /var/log/station.log
615 +
616 +
617 +[[image:image-20230329201624-11.png]]
618 +
619 +
620 +
621 +
622 +
623 += 6. Order Info =
624 +
625 +
626 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
627 +
628 +**~ (% style="color:#0000ff" %)XX:(%%)**
629 +
630 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
631 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
632 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
633 +
634 += 7. Packing Info =
635 +
636 +(((
637 +
638 +
639 +**PG1302 Package Includes**:
640 +)))
641 +
642 +(((
643 +(((
476 476  * PG1302 x 1
477 477  * LoRa Antenna x 1
646 +)))
647 +)))
478 478  
479 -**~ PG1302-PI Package Includes**:
649 +(((
650 +
480 480  
652 +**PG1302-PI Package Includes**:
653 +)))
654 +
481 481  * PG1302 x 1
482 482  * LoRa Antenna x 1
483 483  * RPi3/4 converter PCB
484 484  * Screws to hole converter PCB on RPI.
485 485  
486 -=== 8. Reference ===
660 +**PG1302-PI Dimension and weight: **
487 487  
488 -* Datasheet, User Manual & Software Download:
662 +* Device Size: 18 x 8 x 4 cm
663 +* Weight: 150g
489 489  
490 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
665 +(((
666 += 8. Support =
491 491  
492 492  
493 -=== 9. Support ===
669 +(((
670 +If you are experiencing issues and can't solve, you can send mail to
671 +)))
494 494  
495 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
496 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
673 +(((
674 +[[support@dragino.com>>mailto:support@dragino.com]]
675 +)))
497 497  
498 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
677 +(((
678 +With your question as detail as possible. We will reply and help you in the shortest.
679 +
680 +
681 +
682 +)))
683 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content
image-20230329164417-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +46.4 KB
Content
image-20230329164704-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +16.6 KB
Content
image-20230329165619-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +106.9 KB
Content
image-20230329195416-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230329195442-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +9.9 KB
Content
image-20230329195650-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +27.7 KB
Content
image-20230329201624-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +20.1 KB
Content