Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 78.1 >
edited by Xiaoling
on 2022/05/06 15:21
To version < 111.2 >
edited by Xiaoling
on 2023/01/06 17:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,54 +3,40 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
10 -
11 -
12 -**PG1302 LoRaWAN Concentrator User Manual**
13 -
14 -
15 -
16 -
17 -
18 18  {{toc/}}
19 19  
20 20  
21 -----
22 -
23 23  (% class="wikigeneratedid" id="H" %)
24 24  (((
25 25  
26 26  )))
27 27  
28 -=== 1. Introduction ===
17 += 1. Introduction =
29 29  
30 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
31 31  
32 -(((
33 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 -)))
35 35  
36 36  (((
37 -The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
23 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
38 38  )))
39 39  
40 40  (((
41 -PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
27 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
42 42  )))
43 43  
44 44  (((
45 -(((
46 -
31 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
47 47  )))
48 -)))
49 49  
50 -==== 1.2 Features ====
51 51  
35 +== 1.2 Features ==
36 +
37 +
52 52  * Base on Semtech SX1302 solution
53 53  * Support Raspberry Pi 3B/3B+/4
54 54  * Up to -140dBm sensitivity
... ... @@ -56,34 +56,46 @@
56 56  * Mini-PCIe Interface
57 57  * Converter board to support Raspberry Pi
58 58  
59 -==== 1.3 General Interfaces ====
60 60  
46 +
47 +== 1.3 General Interfaces for PG1302 ==
48 +
49 +
61 61  * SPI interface for LoRa
62 62  * Power Input: 5v, 1A
63 63  * 1 x I-PEX for LoRa
53 +* Working Temperature: -40 ℃ ~~ 80℃
64 64  
65 -==== 1.4 Pin Mapping ====
66 66  
56 +
57 +== 1.4 Pin Mapping ==
58 +
59 +
67 67   [[image:1651743282627-547.png||height="402" width="425"]]
68 68  
69 69  
70 70  
71 -==== 1.5 LEDs ====
64 +== 1.5 LEDs ==
72 72  
73 - TX: Blink when transmit a packet
74 74  
75 - RX: Blink when receive a packet
67 +(((
68 +TX: Blink when transmit a packet
69 +RX: Blink when receive a packet
70 +Config: Always ON
71 +)))
76 76  
77 - Config: Always ON
78 78  
74 +== 1.6 Power Consumption ==
79 79  
80 -==== 1.6 Power Consumption ====
81 81  
82 - TBD
77 +<300mA @ 3.3v.
83 83  
79 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
84 84  
85 -==== 1.7 Applications ====
86 86  
82 +== 1.7 Applications ==
83 +
84 +
87 87  * Smart Buildings & Home Automation
88 88  * Logistics and Supply Chain Management
89 89  * Smart Metering
... ... @@ -91,408 +91,477 @@
91 91  * Smart Cities
92 92  * Smart Factory
93 93  
94 -=== 2. Example: Set up as LoRaWAN gateway. ===
95 95  
96 -==== 2.1 System structure ====
97 97  
98 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.Set up method for other server are similar.
94 += 2. Example: Set up as LoRaWAN gateway =
99 99  
100 -(% style="text-align:center" %)
101 -[[image:1651743698677-436.png||height="457" width="686"]]
96 +== 2.1 System structure ==
102 102  
103 103  
99 +(((
100 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
104 104  
105 -==== 2.2 Hardware Installation ====
102 +
103 +)))
106 106  
107 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
105 +[[image:1651743698677-436.png||height="457" width="686"]]
108 108  
109 -(% style="text-align:center" %)
110 -[[image:1651743803032-803.png]]
111 111  
108 +== 2.2 Hardware Installation ==
112 112  
113 113  
114 -=== 3. Install the software? ===
111 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
115 115  
116 - There are two ways to install software in RPi4 to use PG1302.
113 +[[image:image-20220621104746-1.png||height="381" width="451"]]
117 117  
118 -* Flash SD card with Dragino pre-build image which support Web UI.
119 -* Install lora packet forwarder in existing RPi OS.
120 120  
121 -=== 4. Flash with pre-build image ===
116 += 3. Install the software? =
122 122  
123 -==== 4.1 Download the dragino image for RPI ====
124 124  
125 - Download PG1302_for_Rpi4_64_with_webui from
119 +There are two ways to install the software in RPi4 to use PG1302.
126 126  
127 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
121 +* Flash SD card with Dragino pre-build image which supports Web UI.
122 +* Install Lora packet forwarder in existing RPi OS.
128 128  
129 129  
130 -==== 4.2 Flash the image to SD card ====
131 131  
132 - Flash the image to SD card:
126 += 4. Flash with pre-build image =
133 133  
134 -(% style="text-align:center" %)
135 -[[image:1651744119133-233.png||height="373" width="621"]]
128 +== 4.1 Download the dragino image for RPI ==
136 136  
137 - Note: Download the flash tool following this link
138 138  
139 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
131 +(((
132 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
133 +)))
140 140  
141 141  
142 -==== 4.3 Access the Linux console ====
136 +== 4.2 Flash the image to an SD card ==
143 143  
144 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
145 145  
146 -Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
139 +Flash the image to the SD card:
147 147  
148 -(% style="text-align:center" %)
149 -[[image:1651744193675-591.png||height="450" width="466"]]
141 +[[image:1651744119133-233.png||height="373" width="621"]]
150 150  
151 151  
152 - The account details for Web Login are:
144 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
153 153  
154 -**~ User Name: root**
155 155  
156 -**~ Password:   dragino**
147 +== 4.3 Access the Linux console ==
157 157  
158 158  
159 -**~ Backup account**
150 +(((
151 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
152 +)))
160 160  
161 -**~ Pi/dragino**
162 162  
155 +[[image:1651744193675-591.png||height="450" width="466"]]
163 163  
164 - After log in, you will be in the Linux console and type command here.
157 +The account details for Web Login are:
165 165  
166 -(% style="text-align:center" %)
167 -[[image:1651744358515-107.png||height="366" width="581"]]
159 +(((
160 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
161 +)))
168 168  
163 +(((
164 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
165 +)))
169 169  
170 -==== 4.4 Access the WebUI of RPi4. ====
167 +(((
168 +
169 +)))
171 171  
172 -===== 4.4.1 Home page =====
171 +(((
172 +**~ (% style="color:#0000ff" %)Backup account(%%)**
173 +)))
173 173  
174 - Open a browser on the PC and type the RPI ip address
175 +(((
176 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
175 175  
176 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
178 +
179 +)))
177 177  
181 +After logging in, you will be in the Linux console and type the command here.
178 178  
179 - You will see the login interface of RPI as shown below.
183 +[[image:1651744358515-107.png||height="366" width="581"]]
180 180  
181 - The account details for Web Login are:
182 182  
183 -**~ User Name: root**
186 +== 4.4 Access the WebUI of RPi4 ==
184 184  
185 -**~ Password:   dragino**
188 +=== 4.4.1 Home page ===
186 186  
187 -(% style="text-align:center" %)
188 -[[image:1651744457761-993.png||height="352" width="621"]]
189 189  
191 +(((
192 +Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
193 +You will see the login interface of RPI as shown below.
194 +The account details for Web Login are:
195 +)))
190 190  
191 -===== 4.4.2 LoRa Page =====
197 +(((
198 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
199 +(% style="color:#0000ff" %)** Password:   dragino**
192 192  
193 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
201 +
202 +)))
194 194  
195 -(% style="text-align:center" %)
196 -[[image:1651744554845-970.png||height="328" width="621"]]
204 +[[image:1651744457761-993.png||height="352" width="621"]]
197 197  
198 198  
199 - Different PG1302 hardware version can support different frequency range:
207 +=== 4.4.2 LoRa Page ===
200 200  
201 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
202 202  
203 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
210 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
204 204  
205 205  
206 - After user choose the frequency plan, he can see the actually frequency in used by checking the
213 +[[image:1651744554845-970.png||height="328" width="621"]]
207 207  
208 - page LogRead ~-~-> LoRa Log
209 209  
210 - Note *: See this instruction for how to customize frequency band
216 +Different PG1302 hardware version can support different frequency range:
211 211  
212 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
218 +* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
219 +* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
213 213  
221 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
214 214  
215 -===== 4.4.3 LoRaWAN Page =====
223 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
216 216  
217 -====== 4.4.3.1 Semtech UDP ======
218 218  
226 +=== 4.4.3 LoRaWAN Page ===
219 219  
220 -(% style="text-align:center" %)
221 -[[image:1651744767914-283.png||height="352" width="621"]]
228 +==== 4.4.3.1 Semtech UDP ====
222 222  
223 223  
231 +[[image:1651744767914-283.png||height="352" width="621"]]
224 224  
225 - Note *: See this instruction for how to configure TTN.
226 226  
227 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
234 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
228 228  
229 229  
230 -====== 4.4.3.2 Basic Station ======
237 +==== 4.4.3.2 Basic Station ====
231 231  
232 -(% style="text-align:center" %)
239 +
233 233  [[image:1651744890629-683.png||height="380" width="621"]]
234 234  
235 235  
236 - Note *: See this instruction for how to configure TTN.
243 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
237 237  
238 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
239 239  
246 +=== 4.4.4 LogRead ===
240 240  
241 -===== 4.4.4 LogRead =====
248 +==== 4.4.4.1 LoRa Log ====
242 242  
243 -====== 4.4.4.1 LoRa Log ======
244 244  
245 -(% style="text-align:center" %)
246 246  [[image:1651744955955-452.png||height="571" width="621"]]
247 247  
248 248  
249 - Show the frequency for LoRa Radio and traffics.
254 +Show the frequency for LoRa Radio and traffics.
250 250  
251 251  
252 -====== 4.4.4.2 System Log ======
257 +==== 4.4.4.2 System Log ====
253 253  
254 - Show system log.
255 255  
256 -(% style="text-align:center" %)
260 +Show system log.
261 +
262 +
257 257  [[image:1651745003470-264.png||height="477" width="621"]]
258 258  
259 259  
266 +==== 4.4.4.3 Record Log ====
260 260  
261 -====== 4.4.4.3 Record Log ======
262 262  
263 -**~ Record the system log.**
269 +**Record the system log.**
264 264  
265 -(% style="text-align:center" %)
271 +
266 266  [[image:1651745069814-662.png||height="144" width="621"]]
267 267  
268 268  
269 -=== 5. Install stand alone LoRa Packet Forwarder. ===
275 += 5. Install stand-alone LoRa Packet Forwarder =
270 270  
271 -==== 5.1 OS requirement ====
277 +== 5.1 OS requirement ==
272 272  
273 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
274 274  
275 - pi@raspberrypi:~~$ cat /etc/os-release
280 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
276 276  
282 +(% class="box" %)
283 +(((
284 + pi@raspberrypi:~~$ cat /etc/os-release
277 277   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
278 -
279 279   NAME="Raspbian GNU/Linux"
280 -
281 281   VERSION_ID="8"
282 -
283 283   VERSION="8 (jessie)"
284 -
285 285   ID=raspbian
286 -
287 287   ID_LIKE=debian
288 -
289 289   HOME_URL="http:~/~/www.raspbian.org/"
290 -
291 291   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
292 -
293 293   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
294 294  
295 +
296 +)))
295 295  
296 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
297 297  
298 - In RPI, run below command to get a Gateway ID
299 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3 ==
299 299  
300 - ifconfig eth0
301 301  
302 -(% style="text-align:center" %)
302 +In RPI, run the below command to get a Gateway ID
303 +
304 +(% class="box infomessage" %)
305 +(((
306 +**~ ifconfig eth0**
307 +)))
308 +
303 303  [[image:1651745210205-512.png||height="130" width="621"]]
304 304  
305 305  
306 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
312 +(((
313 +(((
314 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
307 307  
308 - Make sure to select legacy packet forwarder.
316 +
317 +)))
318 +)))
309 309  
310 -(% style="text-align:center" %)
311 311  [[image:1651745267862-321.png||height="526" width="621"]]
312 312  
313 -
314 -
315 -(% style="text-align:center" %)
316 316  [[image:1651745306744-481.png||height="478" width="621"]]
317 317  
324 +
318 318  After set up, the status should show not connected as below:
319 319  
320 -(% style="text-align:center" %)
321 321  [[image:1651745366987-458.png||height="363" width="621"]]
322 322  
323 323  
324 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
330 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
325 325  
326 - Enable SPI and I2C first:
327 327  
328 - a)SPI needs to be enabled on the Raspberry Pi
333 +Enable SPI and I2C first:
329 329  
330 - Run sudo raspi-config to open the config window
335 +a)  SPI needs to be enabled on the Raspberry Pi
331 331  
332 -(% style="text-align:center" %)
333 -[[image:1651745476754-240.png||height="235" width="631"]]
337 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
334 334  
339 +[[image:1651745476754-240.png||height="234" width="629"]]
335 335  
336 -(% style="text-align:center" %)
341 +
337 337  [[image:image-20220505181135-1.png]]
338 338  
339 -(% style="text-align:center" %)
340 -[[image:image-20220505181135-2.png]]
341 341  
345 +[[image:image-20220505181135-2.png||height="229" width="622"]]
342 342  
343 343  
344 344  
345 - In RPI , Fist: Enter root account:
349 +In RPI, Fist: Enter the root account:
346 346  
347 -(% style="text-align:center" %)
348 -[[image:1651745583363-614.png]]
351 +(((
352 +[[image:1651745583363-614.png||height="151" width="732"]]
349 349  
354 +
355 +)))
350 350  
351 - and then run:
352 352  
353 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
358 +**Select the appropriate device version to download:**
354 354  
355 - chmod +x ./auto_install.sh
356 356  
357 - ./auto_install.sh
361 +(((
362 +**draginofwd-32bit**
358 358  
359 -(% style="text-align:center" %)
360 -[[image:1651745611629-818.png]]
364 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
361 361  
362 362  
363 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
367 +**dragino-64bit**
368 +)))
364 364  
365 - You can get these output:
370 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
366 366  
367 -(% style="text-align:center" %)
368 -[[image:1651745657252-173.png||height="426" width="621"]]
369 369  
373 +**dragino-tiker-32bit**
370 370  
371 -===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
375 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
372 372  
373 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
374 374  
375 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
378 +(((
379 +
376 376  
377 -(% style="text-align:center" %)
378 -[[image:1651745709709-887.png||height="820" width="621"]]
381 +[[image:image-20220928181226-1.png||height="218" width="1100"]]
379 379  
383 +
384 +)))
380 380  
381 - User can find the TTN v3 server address from:
386 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
382 382  
383 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
384 384  
389 +(((
390 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
391 +)))
385 385  
386 - And the default frequency band is US915 in **global_conf.json** file.
393 +(((
394 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
387 387  
388 -(% style="text-align:center" %)
396 +
397 +)))
398 +
399 +[[image:1651745709709-887.png||height="820" width="621"]]
400 +
401 +
402 +User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
403 +
404 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
405 +
389 389  [[image:1651745838008-820.png||height="650" width="621"]]
390 390  
391 391  
392 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
409 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
393 393  
394 - 1).Chose your need the name of region frequency.
411 +**~ 1). Chose your need the name of region frequency.**
395 395  
396 -(% style="text-align:center" %)
397 -[[image:1651745867516-322.png]]
398 398  
414 +[[image:1651745867516-322.png||height="83" width="740"]]
399 399  
400 - 2). Use this command to copy it.
401 401  
402 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
403 403  
404 -(% style="text-align:center" %)
405 -[[image:1651745984006-868.png]]
418 +**~ 2). Use this command to copy it.**
406 406  
420 +(% class="box infomessage" %)
421 +(((
422 +**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
423 +)))
407 407  
408 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
425 +[[image:1651745984006-868.png||height="87" width="745"]]
409 409  
410 -(% class="wikigeneratedid" %)
427 +
428 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
429 +
430 +
431 +
432 +=== 5.2.3 Check result ===
433 +
434 +
411 411  (((
412 -
436 +Run below command to restart the dragino_fwd:
413 413  )))
414 414  
415 -===== 5.2.3 Check result =====
439 +(((
440 +(% class="box infomessage" %)
441 +(((
442 +**sudo systemctl stop draginofwd**
443 +)))
416 416  
417 - Run below command to restart the dragino_fwd:
445 +(% class="box infomessage" %)
446 +(((
447 +**sudo systemctl start draginofwd**
448 +)))
449 +)))
418 418  
419 - sudo systemctl stop draginofwd
420 420  
421 - sudo systemctl start draginofwd
452 +(((
453 +debug check the ruing status of fwd:
454 +)))
422 422  
423 - debug check the ruing status of fwd:
456 +(((
457 +(% class="box infomessage" %)
458 +(((
459 +**sudo systemctl status draginofwd**
460 +)))
461 +)))
424 424  
425 - sudo systemctl status draginofwd
463 +[[image:1651746045057-414.png||height="193" width="729"]]
426 426  
427 -(% style="text-align:center" %)
428 -[[image:1651746045057-414.png]]
429 429  
430 430  
431 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
467 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
432 432  
433 -(% style="text-align:center" %)
469 +
434 434  [[image:1651746078253-168.png||height="372" width="621"]]
435 435  
436 436  
437 437  
438 - We can check dragino_fwd running states in RPi by running:
474 +We can check dragino_fwd running states in RPi by running:
439 439  
440 - //**sudo journalctl -u draginofwd -f**//
476 +(% class="box infomessage" %)
477 +(((
478 +**~ sudo journalctl -u draginofwd -f**
479 +)))
441 441  
442 -(% style="text-align:center" %)
443 -[[image:1651746111963-838.png]]
481 +[[image:1651746111963-838.png||height="184" width="730"]]
444 444  
445 445  
446 446  
447 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
485 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
448 448  
449 -(% style="text-align:center" %)
450 450  [[image:1651746139304-966.png||height="326" width="621"]]
451 451  
452 452  
490 +=== 5.2.4 Commands to handle service ===
453 453  
454 -===== 5.2.4 Commands to handle service =====
455 455  
456 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
457 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
458 -* **Start** dragino_fwd : sudo systemctl start draginofwd
459 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
460 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
493 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
494 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
495 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
496 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
497 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
461 461  
462 -=== 6. Order Info ===
463 463  
464 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
465 465  
466 -**~ XX:**
501 += 6. Order Info =
467 467  
468 -* 868 (For Bands: EU868,IN865)
469 -* 915 (For Bands: US915,AU915,AS923,KR920)
470 -* 470 (For Band: CN470)
471 471  
472 -=== 7. Packing Info ===
504 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
473 473  
474 -**~ PG1302 Package Includes**:
506 +**~ (% style="color:#0000ff" %)XX:(%%)**
475 475  
508 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
509 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
510 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
511 +
512 +
513 +
514 += 7. Packing Info =
515 +
516 +(((
517 +
518 +
519 +**PG1302 Package Includes**:
520 +)))
521 +
522 +(((
523 +(((
476 476  * PG1302 x 1
477 477  * LoRa Antenna x 1
526 +)))
527 +)))
478 478  
479 -**~ PG1302-PI Package Includes**:
529 +(((
530 +
480 480  
532 +**PG1302-PI Package Includes**:
533 +)))
534 +
481 481  * PG1302 x 1
482 482  * LoRa Antenna x 1
483 483  * RPi3/4 converter PCB
484 484  * Screws to hole converter PCB on RPI.
485 485  
486 -=== 8. Reference ===
540 +**PG1302-PI Dimension and weight: **
487 487  
488 -* Datasheet, User Manual & Software Download:
542 +* Device Size: 18 x 8 x 4 cm
543 +* Weight: 150g
489 489  
490 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
491 491  
492 492  
493 -=== 9. Support ===
547 +(((
548 += 8. Support =
494 494  
495 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
496 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
497 497  
498 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
551 +(((
552 +If you are experiencing issues and can't solve, you can send mail to
553 +)))
554 +
555 +(((
556 +[[support@dragino.com>>mailto:support@dragino.com]]
557 +)))
558 +
559 +(((
560 +With your question as detail as possible. We will reply and help you in the shortest.
561 +
562 +
563 +
564 +)))
565 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0