Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 72.1 >
edited by Xiaoling
on 2022/05/06 11:49
To version < 99.1 >
edited by Xiaoling
on 2022/05/14 16:58
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,44 +3,27 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg||height="391" width="549"]]
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 12  **PG1302 LoRaWAN Concentrator User Manual**
13 13  
14 -[[image:1651796979665-130.png]]
15 15  
16 -Document Version: 1.0.0
9 +**Contents:**
17 17  
18 -Image Version: v1.0
19 -
20 -
21 -
22 -
23 -----
24 -
25 25  {{toc/}}
26 26  
27 -----
28 28  
29 -
30 -
31 31  (% class="wikigeneratedid" id="H" %)
32 32  (((
33 33  
34 34  )))
35 35  
36 -=== 1. Introduction ===
19 += 1. Introduction =
37 37  
38 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
21 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
39 39  
40 40  (((
41 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
42 42  )))
43 43  
44 44  (((
... ... @@ -49,14 +49,8 @@
49 49  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
50 50  )))
51 51  
52 -(((
53 -(((
54 -
55 -)))
56 -)))
35 +== 1.2 Features ==
57 57  
58 -==== 1.2 Features ====
59 -
60 60  * Base on Semtech SX1302 solution
61 61  * Support Raspberry Pi 3B/3B+/4
62 62  * Up to -140dBm sensitivity
... ... @@ -64,34 +64,28 @@
64 64  * Mini-PCIe Interface
65 65  * Converter board to support Raspberry Pi
66 66  
67 -==== 1.3 General Interfaces ====
44 +== 1.3 General Interfaces ==
68 68  
69 69  * SPI interface for LoRa
70 70  * Power Input: 5v, 1A
71 71  * 1 x I-PEX for LoRa
72 72  
73 -==== 1.4 Pin Mapping ====
50 +== 1.4 Pin Mapping ==
74 74  
75 75   [[image:1651743282627-547.png||height="402" width="425"]]
76 76  
54 +== 1.5 LEDs ==
77 77  
56 + TX: Blink when transmit a packet
57 + RX: Blink when receive a packet
58 + Config: Always ON
78 78  
79 -==== 1.5 LEDs ====
60 +== 1.6 Power Consumption ==
80 80  
81 - TX: Blink when transmit a packet
62 + TBD
82 82  
83 - RX: Blink when receive a packet
64 +== 1.7 Applications ==
84 84  
85 - Config: Always ON
86 -
87 -
88 -==== 1.6 Power Consumption ====
89 -
90 - TBD
91 -
92 -
93 -==== 1.7 Applications ====
94 -
95 95  * Smart Buildings & Home Automation
96 96  * Logistics and Supply Chain Management
97 97  * Smart Metering
... ... @@ -99,47 +99,38 @@
99 99  * Smart Cities
100 100  * Smart Factory
101 101  
102 -=== 2. Example: Set up as LoRaWAN gateway. ===
73 += 2. Example: Set up as LoRaWAN gateway. =
103 103  
104 -==== 2.1 System structure ====
75 +== 2.1 System structure ==
105 105  
106 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
77 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
107 107  
108 -(% style="text-align:center" %)
109 109  [[image:1651743698677-436.png||height="457" width="686"]]
110 110  
81 +== 2.2 Hardware Installation ==
111 111  
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
112 112  
113 -==== 2.2 Hardware Installation ====
114 -
115 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
116 -
117 -(% style="text-align:center" %)
118 118  [[image:1651743803032-803.png]]
119 119  
87 += 3. Install the software? =
120 120  
89 +There are two ways to install software in RPi4 to use PG1302.
121 121  
122 -=== 3. Install the software? ===
123 -
124 - There are two ways to install software in RPi4 to use PG1302.
125 -
126 126  * Flash SD card with Dragino pre-build image which support Web UI.
127 127  * Install lora packet forwarder in existing RPi OS.
128 128  
129 -=== 4. Flash with pre-build image ===
94 += 4. Flash with pre-build image =
130 130  
131 -==== 4.1 Download the dragino image for RPI ====
96 +== 4.1 Download the dragino image for RPI ==
132 132  
133 - Download PG1302_for_Rpi4_64_with_webui from
98 +Download PG1302_for_Rpi4_64_with_webui from
99 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
134 134  
135 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
101 +== 4.2 Flash the image to SD card ==
136 136  
103 +Flash the image to SD card:
137 137  
138 -==== 4.2 Flash the image to SD card ====
139 -
140 - Flash the image to SD card:
141 -
142 -(% style="text-align:center" %)
143 143  [[image:1651744119133-233.png||height="373" width="621"]]
144 144  
145 145   Note: Download the flash tool following this link
... ... @@ -146,359 +146,340 @@
146 146  
147 147   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
148 148  
111 +== 4.3 Access the Linux console ==
149 149  
150 -==== 4.3 Access the Linux console. ====
113 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
151 151  
152 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
153 -
154 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
155 -
156 -(% style="text-align:center" %)
157 157  [[image:1651744193675-591.png||height="450" width="466"]]
158 158  
117 +The account details for Web Login are:
159 159  
160 - The account details for Web Login are:
119 +(((
120 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
121 +)))
161 161  
162 -**~ User Name: root**
123 +(((
124 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
125 +)))
163 163  
164 -**~ Password:   dragino**
127 +(((
128 +
129 +)))
165 165  
131 +(((
132 +**~ (% style="color:#0000ff" %)Backup account(%%)**
133 +)))
166 166  
167 -**~ Backup account**
135 +(((
136 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
137 +)))
168 168  
169 -**~ Pi/dragino**
139 +After log in, you will be in the Linux console and type command here.
170 170  
171 -
172 - After log in, you will be in the Linux console and type command here.
173 -
174 -(% style="text-align:center" %)
175 175  [[image:1651744358515-107.png||height="366" width="581"]]
176 176  
143 +== 4.4 Access the WebUI of RPi4. ==
177 177  
178 -==== 4.4 Access the WebUI of RPi4. ====
145 +=== 4.4.1 Home page ===
179 179  
180 -===== 4.4.1 Home page =====
147 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
148 +You will see the login interface of RPI as shown below.
149 +The account details for Web Login are:
181 181  
182 - Open a browser on the PC and type the RPI ip address
151 +(((
152 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
153 +(% style="color:#0000ff" %)** Password:   dragino**
154 +)))
183 183  
184 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
185 -
186 -
187 - You will see the login interface of RPI as shown below.
188 -
189 - The account details for Web Login are:
190 -
191 -**~ User Name: root**
192 -
193 -**~ Password:   dragino**
194 -
195 -(% style="text-align:center" %)
196 196  [[image:1651744457761-993.png||height="352" width="621"]]
197 197  
158 +=== 4.4.2 LoRa Page ===
198 198  
199 -===== 4.4.2 LoRa Page =====
160 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
200 200  
201 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
202 -
203 -(% style="text-align:center" %)
204 204  [[image:1651744554845-970.png||height="328" width="621"]]
205 205  
164 +Different PG1302 hardware version can support different frequency range:
206 206  
207 - Different PG1302 hardware version can support different frequency range:
166 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
208 208  
209 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
168 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
210 210  
211 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
170 +After user choose the frequency plan, he can see the actually frequency in used by checking the
212 212  
172 +page LogRead ~-~-> LoRa Log
213 213  
214 - After user choose the frequency plan, he can see the actually frequency in used by checking the
174 +Note *: See this instruction for how to customize frequency band
215 215  
216 - page LogRead ~-~-> LoRa Log
176 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
217 217  
218 - Note *: See this instruction for how to customize frequency band
178 +=== 4.4.3 LoRaWAN Page ===
219 219  
220 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
180 +==== 4.4.3.1 Semtech UDP ====
221 221  
222 -
223 -===== 4.4.3 LoRaWAN Page =====
224 -
225 -====== 4.4.3.1 Semtech UDP ======
226 -
227 -
228 -(% style="text-align:center" %)
229 229  [[image:1651744767914-283.png||height="352" width="621"]]
230 230  
184 +Note *: See this instruction for how to configure TTN.
231 231  
186 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
232 232  
233 - Note *: See this instruction for how to configure TTN.
188 +==== 4.4.3.2 Basic Station ====
234 234  
235 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
236 -
237 -
238 -====== 4.4.3.2 Basic Station ======
239 -
240 -(% style="text-align:center" %)
241 241  [[image:1651744890629-683.png||height="380" width="621"]]
242 242  
192 +Note *: See this instruction for how to configure TTN.
243 243  
244 - Note *: See this instruction for how to configure TTN.
194 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
245 245  
246 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
196 +=== 4.4.4 LogRead ===
247 247  
198 +==== 4.4.4.1 LoRa Log ====
248 248  
249 -===== 4.4.4 LogRead =====
250 -
251 -====== 4.4.4.1 LoRa Log ======
252 -
253 -(% style="text-align:center" %)
254 254  [[image:1651744955955-452.png||height="571" width="621"]]
255 255  
202 +Show the frequency for LoRa Radio and traffics.
256 256  
257 - Show the frequency for LoRa Radio and traffics.
204 +==== 4.4.4.2 System Log ====
258 258  
206 +Show system log.
259 259  
260 -====== 4.4.4.2 System Log ======
261 -
262 - Show system log.
263 -
264 -(% style="text-align:center" %)
265 265  [[image:1651745003470-264.png||height="477" width="621"]]
266 266  
210 +==== 4.4.4.3 Record Log ====
267 267  
212 +**Record the system log.**
268 268  
269 -====== 4.4.4.3 Record Log ======
270 -
271 -**~ Record the system log.**
272 -
273 -(% style="text-align:center" %)
274 274  [[image:1651745069814-662.png||height="144" width="621"]]
275 275  
216 += 5. Install stand alone LoRa Packet Forwarder. =
276 276  
277 -=== 5. Install stand alone LoRa Packet Forwarder. ===
218 +== 5.1 OS requirement ==
278 278  
279 -==== 5.1 OS requirement ====
220 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
280 280  
281 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
282 -
283 - pi@raspberrypi:~~$ cat /etc/os-release
284 -
222 +(% class="box" %)
223 +(((
224 + pi@raspberrypi:~~$ cat /etc/os-release
285 285   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
286 -
287 287   NAME="Raspbian GNU/Linux"
288 -
289 289   VERSION_ID="8"
290 -
291 291   VERSION="8 (jessie)"
292 -
293 293   ID=raspbian
294 -
295 295   ID_LIKE=debian
296 -
297 297   HOME_URL="http:~/~/www.raspbian.org/"
298 -
299 299   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
300 -
301 301   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
234 +)))
302 302  
236 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
303 303  
304 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
238 +In RPI, run below command to get a Gateway ID
305 305  
306 - In RPI, run below command to get a Gateway ID
240 +(% class="box infomessage" %)
241 +(((
242 + ifconfig eth0
243 +)))
307 307  
308 - ifconfig eth0
309 -
310 -(% style="text-align:center" %)
311 311  [[image:1651745210205-512.png||height="130" width="621"]]
312 312  
247 +(((
248 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
249 +)))
313 313  
314 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
315 -
316 -(% style="text-align:center" %)
317 317  [[image:1651745267862-321.png||height="526" width="621"]]
318 318  
319 -
320 -
321 -(% style="text-align:center" %)
322 322  [[image:1651745306744-481.png||height="478" width="621"]]
323 323  
324 324  After set up, the status should show not connected as below:
325 325  
326 -(% style="text-align:center" %)
327 327  [[image:1651745366987-458.png||height="363" width="621"]]
328 328  
259 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
329 329  
330 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
261 +Enable SPI and I2C first:
331 331  
332 - Enable SPI and I2C first:
263 +a)SPI needs to be enabled on the Raspberry Pi
333 333  
334 - a)SPI needs to be enabled on the Raspberry Pi
265 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
335 335  
336 - Run sudo raspi-config to open the config window
267 +[[image:1651745476754-240.png||height="234" width="629"]]
337 337  
338 -(% style="text-align:center" %)
339 -[[image:1651745476754-240.png||height="235" width="631"]]
340 -
341 -
342 -(% style="text-align:center" %)
343 343  [[image:image-20220505181135-1.png]]
344 344  
345 -(% style="text-align:center" %)
346 -[[image:image-20220505181135-2.png]]
271 +[[image:image-20220505181135-2.png||height="229" width="622"]]
347 347  
273 +In RPI , Fist: Enter root account:
348 348  
275 +[[image:1651745583363-614.png||height="151" width="732"]]
349 349  
350 350  
351 - In RPI , Fist: Enter root account:
278 +and then run:
352 352  
353 -(% style="text-align:center" %)
354 -[[image:1651745583363-614.png]]
280 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
355 355  
282 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
356 356  
357 - and then run:
284 +(% style="background-color:#dcdcdc" %)./auto_install.sh
358 358  
359 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
286 +[[image:1651745611629-818.png||height="225" width="729"]]
360 360  
361 - chmod +x ./auto_install.sh
288 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
362 362  
363 - ./auto_install.sh
290 +You can get these output:
364 364  
365 -(% style="text-align:center" %)
366 -[[image:1651745611629-818.png]]
367 -
368 -
369 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
370 -
371 - You can get these output:
372 -
373 -(% style="text-align:center" %)
374 374  [[image:1651745657252-173.png||height="426" width="621"]]
375 375  
294 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
376 376  
377 -===== 5.5.2 Config Gateway ID, Frequency Band and Server address =====
296 +(((
297 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
298 +)))
378 378  
379 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
300 +(((
301 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
302 +)))
380 380  
381 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
382 -
383 -(% style="text-align:center" %)
384 384  [[image:1651745709709-887.png||height="820" width="621"]]
385 385  
306 +User can find the TTN v3 server address from:
386 386  
387 - User can find the TTN v3 server address from:
308 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
388 388  
389 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
310 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
390 390  
391 -
392 - And the default frequency band is US915 in **global_conf.json** file.
393 -
394 -(% style="text-align:center" %)
395 395  [[image:1651745838008-820.png||height="650" width="621"]]
396 396  
314 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
397 397  
398 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
316 + 1).Chose your need the name of region frequency.
399 399  
400 - 1).Chose your need the name of region frequency.
318 +[[image:1651745867516-322.png||height="83" width="740"]]
401 401  
402 -(% style="text-align:center" %)
403 -[[image:1651745867516-322.png]]
404 -
405 -
406 406   2). Use this command to copy it.
407 407  
408 408   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
409 409  
410 -(% style="text-align:center" %)
411 -[[image:1651745984006-868.png]]
324 +[[image:1651745984006-868.png||height="87" width="745"]]
412 412  
326 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
413 413  
414 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
328 +=== 5.2.3 Check result ===
415 415  
416 -(% class="wikigeneratedid" %)
417 417  (((
418 -
331 +Run below command to restart the dragino_fwd:
419 419  )))
420 420  
421 -===== 5.2.3 Check result =====
334 +(((
335 +(% class="box infomessage" %)
336 +(((
337 +sudo systemctl stop draginofwd
338 +)))
422 422  
423 - Run below command to restart the dragino_fwd:
340 +(% class="box infomessage" %)
341 +(((
342 +sudo systemctl start draginofwd
343 +)))
344 +)))
424 424  
425 - sudo systemctl stop draginofwd
346 +(((
347 +debug check the ruing status of fwd:
348 +)))
426 426  
427 - sudo systemctl start draginofwd
350 +(((
351 +(% class="box infomessage" %)
352 +(((
353 +sudo systemctl status draginofwd
354 +)))
355 +)))
428 428  
429 - debug check the ruing status of fwd:
357 +[[image:1651746045057-414.png||height="193" width="729"]]
430 430  
431 - sudo systemctl status draginofwd
359 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
432 432  
433 -(% style="text-align:center" %)
434 -[[image:1651746045057-414.png]]
435 -
436 -
437 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
438 -
439 -(% style="text-align:center" %)
440 440  [[image:1651746078253-168.png||height="372" width="621"]]
441 441  
442 442  
364 +We can check dragino_fwd running states in RPi by running:
443 443  
444 - We can check dragino_fwd running states in RPi by running:
366 +(% class="box infomessage" %)
367 +(((
368 +*
369 +** sudo journalctl -u draginofwd -f
370 +)))
445 445  
446 - //**sudo journalctl -u draginofwd -f**//
372 +[[image:1651746111963-838.png||height="184" width="730"]]
447 447  
448 -(% style="text-align:center" %)
449 -[[image:1651746111963-838.png]]
374 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
450 450  
451 -
452 -
453 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
454 -
455 -(% style="text-align:center" %)
456 456  [[image:1651746139304-966.png||height="326" width="621"]]
457 457  
378 +=== 5.2.4 Commands to handle service ===
458 458  
380 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
381 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
382 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
383 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
384 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
459 459  
460 -===== 5.2.4 Commands to handle service =====
386 += 6. Order Info =
461 461  
462 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
463 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
464 -* **Start** dragino_fwd : sudo systemctl start draginofwd
465 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
466 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
388 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
467 467  
468 -=== 6. Order Info ===
390 +**~ (% style="color:#0000ff" %)XX:(%%)**
469 469  
470 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
392 +* (% style="color:#0000ff" %)868 (%%)(For Bands: EU868,IN865)
393 +* (% style="color:#0000ff" %)915 (%%)(For Bands: US915,AU915,AS923,KR920)
394 +* (% style="color:#0000ff" %)470 (%%)(For Band: CN470)
471 471  
472 -**~ XX:**
396 += 7. Packing Info =
473 473  
474 -* 868 (For Bands: EU868,IN865)
475 -* 915 (For Bands: US915,AU915,AS923,KR920)
476 -* 470 (For Band: CN470)
398 +(((
399 +**PG1302 Package Includes**:
400 +)))
477 477  
478 -=== 7. Packing Info ===
402 +(((
403 +* (((
404 +PG1302 x 1
405 +)))
406 +* (((
407 +LoRa Antenna x 1
408 +)))
409 +)))
479 479  
480 -**~ PG1302 Package Includes**:
411 +(((
412 +
413 +)))
481 481  
482 -* PG1302 x 1
483 -* LoRa Antenna x 1
415 +(((
416 +**PG1302-PI Package Includes**:
417 +)))
484 484  
485 -**~ PG1302-PI Package Includes**:
419 +* (((
420 +PG1302 x 1
421 +)))
422 +* (((
423 +LoRa Antenna x 1
424 +)))
425 +* (((
426 +RPi3/4 converter PCB
427 +)))
486 486  
487 -* PG1302 x 1
488 -* LoRa Antenna x 1
489 -* RPi3/4 converter PCB
490 -* Screws to hole converter PCB on RPI.
429 +(((
430 +* (((
431 +Screws to hole converter PCB on RPI.
432 +)))
491 491  
492 -=== 8. Reference ===
434 += 8. Support =
493 493  
494 -* Datasheet, User Manual & Software Download:
436 +(((
437 +If you are experiencing issues and can’t solve, you can send mail to
438 +)))
495 495  
496 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
440 +(((
441 +[[support@dragino.com>>mailto:support@dragino.com]]
442 +)))
497 497  
498 -
499 -=== 9. Support ===
500 -
501 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
502 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
503 -
504 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
444 +(((
445 +With your question as detail as possible. We will reply and help you in the shortest.
446 +)))
447 +)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0