Skip to Content
Last modified by Kilight Cao on 2024/06/22 10:43
From version 69.1
edited by Xiaoling
on 2022/05/06 11:28
Change comment: There is no comment for this version
To version 108.2
edited by Xiaoling
on 2022/07/04 16:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,52 +3,33 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
9 +{{toc/}}
10 10  
11 11  
12 -**PG1302 LoRaWAN Concentrator User Manual**
12 +(% class="wikigeneratedid" id="H" %)
13 +(((
14 +
15 +)))
13 13  
14 -[[image:1651796979665-130.png]]
17 += **1. Introduction** =
15 15  
16 -Document Version: 1.0.0
19 +== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
17 17  
18 -Image Version: v1.0
19 19  
22 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
20 20  
24 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
21 21  
26 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
22 22  
23 -{{toc/}}
24 24  
29 +== **1.2 Features** ==
25 25  
26 -=== 1. Introduction ===
27 -
28 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
29 -
30 -(((
31 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
32 -)))
33 -
34 -(((
35 -The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
36 -)))
37 -
38 -(((
39 -PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
40 -)))
41 -
42 -(((
43 -(((
44 -
45 -)))
46 -)))
47 -
48 -==== 1.2 Features ====
49 -
50 50  * Base on Semtech SX1302 solution
51 51  * Support Raspberry Pi 3B/3B+/4
52 52  * Up to -140dBm sensitivity
... ... @@ -54,34 +54,32 @@
54 54  * Mini-PCIe Interface
55 55  * Converter board to support Raspberry Pi
56 56  
57 -==== 1.3 General Interfaces ====
38 +== **1.3 General Interfaces for PG1302** ==
58 58  
59 59  * SPI interface for LoRa
60 60  * Power Input: 5v, 1A
61 61  * 1 x I-PEX for LoRa
62 62  
63 -==== 1.4 Pin Mapping ====
44 +== **1.4 Pin Mapping** ==
64 64  
65 65   [[image:1651743282627-547.png||height="402" width="425"]]
66 66  
48 +== **1.5 LEDs** ==
67 67  
50 + TX: Blink when transmit a packet
51 + RX: Blink when receive a packet
52 + Config: Always ON
68 68  
69 -==== 1.5 LEDs ====
70 70  
71 - TX: Blink when transmit a packet
55 +== **1.6 Power Consumption** ==
72 72  
73 - RX: Blink when receive a packet
57 + <300mA @ 3.3v.
74 74  
75 - Config: Always ON
59 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
76 76  
77 77  
78 -==== 1.6 Power Consumption ====
62 +== **1.7 Applications** ==
79 79  
80 - TBD
81 -
82 -
83 -==== 1.7 Applications ====
84 -
85 85  * Smart Buildings & Home Automation
86 86  * Logistics and Supply Chain Management
87 87  * Smart Metering
... ... @@ -89,47 +89,42 @@
89 89  * Smart Cities
90 90  * Smart Factory
91 91  
92 -=== 2. Example: Set up as LoRaWAN gateway. ===
71 += **2. Example: Set up as LoRaWAN gateway.** =
93 93  
94 -==== 2.1 System structure ====
73 +== **2.1 System structure** ==
95 95  
96 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
97 97  
98 -(% style="text-align:center" %)
76 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
77 +
99 99  [[image:1651743698677-436.png||height="457" width="686"]]
100 100  
101 101  
81 +== **2.2 Hardware Installation** ==
102 102  
103 -==== 2.2 Hardware Installation ====
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
104 104  
105 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
85 +[[image:image-20220621104746-1.png||height="381" width="451"]]
106 106  
107 -(% style="text-align:center" %)
108 -[[image:1651743803032-803.png]]
109 109  
88 += **3. Install the software?** =
110 110  
90 +There are two ways to install the software in RPi4 to use PG1302.
111 111  
112 -=== 3. Install the software? ===
92 +* Flash SD card with Dragino pre-build image which supports Web UI.
93 +* Install Lora packet forwarder in existing RPi OS.
113 113  
114 - There are two ways to install software in RPi4 to use PG1302.
95 += **4. Flash with pre-build image** =
115 115  
116 -* Flash SD card with Dragino pre-build image which support Web UI.
117 -* Install lora packet forwarder in existing RPi OS.
97 +== **4.1 Download the dragino image for RPI** ==
118 118  
119 -=== 4. Flash with pre-build image ===
99 +Download PG1302_for_Rpi4_64_with_webui from
100 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
120 120  
121 -==== 4.1 Download the dragino image for RPI ====
122 122  
123 - Download PG1302_for_Rpi4_64_with_webui from
103 +== **4.2 Flash the image to an SD card** ==
124 124  
125 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
105 +Flash the image to the SD card:
126 126  
127 -
128 -==== 4.2 Flash the image to SD card ====
129 -
130 - Flash the image to SD card:
131 -
132 -(% style="text-align:center" %)
133 133  [[image:1651744119133-233.png||height="373" width="621"]]
134 134  
135 135   Note: Download the flash tool following this link
... ... @@ -137,358 +137,360 @@
137 137   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
138 138  
139 139  
140 -==== 4.3 Access the Linux console. ====
114 +== **4.3 Access the Linux console** ==
141 141  
142 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
116 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
143 143  
144 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
145 -
146 -(% style="text-align:center" %)
147 147  [[image:1651744193675-591.png||height="450" width="466"]]
148 148  
120 +The account details for Web Login are:
149 149  
150 - The account details for Web Login are:
122 +(((
123 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
124 +)))
151 151  
152 -**~ User Name: root**
126 +(((
127 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
128 +)))
153 153  
154 -**~ Password:   dragino**
130 +(((
131 +
132 +)))
155 155  
134 +(((
135 +**~ (% style="color:#0000ff" %)Backup account(%%)**
136 +)))
156 156  
157 -**~ Backup account**
138 +(((
139 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
158 158  
159 -**~ Pi/dragino**
141 +
142 +)))
160 160  
144 +After logging in, you will be in the Linux console and type the command here.
161 161  
162 - After log in, you will be in the Linux console and type command here.
163 -
164 -(% style="text-align:center" %)
165 165  [[image:1651744358515-107.png||height="366" width="581"]]
166 166  
167 167  
168 -==== 4.4 Access the WebUI of RPi4. ====
149 +== **4.4 Access the WebUI of RPi4.** ==
169 169  
170 -===== 4.4.1 Home page =====
151 +=== **4.4.1 Home page** ===
171 171  
172 - Open a browser on the PC and type the RPI ip address
153 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by the uplink router)
154 +You will see the login interface of RPI as shown below.
155 +The account details for Web Login are:
173 173  
174 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
157 +(((
158 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
159 +(% style="color:#0000ff" %)** Password:   dragino**
160 +)))
175 175  
176 -
177 - You will see the login interface of RPI as shown below.
178 -
179 - The account details for Web Login are:
180 -
181 -**~ User Name: root**
182 -
183 -**~ Password:   dragino**
184 -
185 -(% style="text-align:center" %)
186 186  [[image:1651744457761-993.png||height="352" width="621"]]
187 187  
188 188  
189 -===== 4.4.2 LoRa Page =====
165 +=== **4.4.2 LoRa Page** ===
190 190  
191 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
167 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
192 192  
193 -(% style="text-align:center" %)
194 194  [[image:1651744554845-970.png||height="328" width="621"]]
195 195  
171 +Different PG1302 hardware version can support different frequency range:
196 196  
197 - Different PG1302 hardware version can support different frequency range:
173 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
198 198  
199 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
175 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
200 200  
201 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
177 +After user choose the frequency plan, he can see the actually frequency in used by checking the
202 202  
179 +page LogRead ~-~-> LoRa Log
203 203  
204 - After user choose the frequency plan, he can see the actually frequency in used by checking the
181 +Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
205 205  
206 - page LogRead ~-~-> LoRa Log
207 207  
208 - Note *: See this instruction for how to customize frequency band
184 +=== **4.4.3 LoRaWAN Page** ===
209 209  
210 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
186 +==== **4.4.3.1 Semtech UDP** ====
211 211  
212 -
213 -===== 4.4.3 LoRaWAN Page =====
214 -
215 -====== 4.4.3.1 Semtech UDP ======
216 -
217 -
218 -(% style="text-align:center" %)
219 219  [[image:1651744767914-283.png||height="352" width="621"]]
220 220  
190 +Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].
221 221  
222 222  
223 - Note *: See this instruction for how to configure TTN.
193 +==== **4.4.3.2 Basic Station** ====
224 224  
225 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
226 -
227 -
228 -====== 4.4.3.2 Basic Station ======
229 -
230 -(% style="text-align:center" %)
231 231  [[image:1651744890629-683.png||height="380" width="621"]]
232 232  
197 +Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].
233 233  
234 - Note *: See this instruction for how to configure TTN.
235 235  
236 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
200 +=== **4.4.4 LogRead** ===
237 237  
202 +==== **4.4.4.1 LoRa Log** ====
238 238  
239 -===== 4.4.4 LogRead =====
240 -
241 -====== 4.4.4.1 LoRa Log ======
242 -
243 -(% style="text-align:center" %)
244 244  [[image:1651744955955-452.png||height="571" width="621"]]
245 245  
206 +Show the frequency for LoRa Radio and traffics.
246 246  
247 - Show the frequency for LoRa Radio and traffics.
248 248  
209 +==== **4.4.4.2 System Log** ====
249 249  
250 -====== 4.4.4.2 System Log ======
211 +Show system log.
251 251  
252 - Show system log.
253 -
254 -(% style="text-align:center" %)
255 255  [[image:1651745003470-264.png||height="477" width="621"]]
256 256  
257 257  
216 +==== **4.4.4.3 Record Log** ====
258 258  
259 -====== 4.4.4.3 Record Log ======
218 +**Record the system log.**
260 260  
261 -**~ Record the system log.**
262 -
263 -(% style="text-align:center" %)
264 264  [[image:1651745069814-662.png||height="144" width="621"]]
265 265  
266 266  
267 -=== 5. Install stand alone LoRa Packet Forwarder. ===
223 += **5. Install stand-alone LoRa Packet Forwarder.** =
268 268  
269 -==== 5.1 OS requirement ====
225 +== **5.1 OS requirement** ==
270 270  
271 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
227 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
272 272  
273 - pi@raspberrypi:~~$ cat /etc/os-release
274 -
229 +(% class="box" %)
230 +(((
231 + pi@raspberrypi:~~$ cat /etc/os-release
275 275   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
276 -
277 277   NAME="Raspbian GNU/Linux"
278 -
279 279   VERSION_ID="8"
280 -
281 281   VERSION="8 (jessie)"
282 -
283 283   ID=raspbian
284 -
285 285   ID_LIKE=debian
286 -
287 287   HOME_URL="http:~/~/www.raspbian.org/"
288 -
289 289   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
290 -
291 291   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
292 292  
242 +
243 +)))
293 293  
294 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
245 +== **5.2 Get Gateway ID in Raspberry and input this in TTN v3.** ==
295 295  
296 - In RPI, run below command to get a Gateway ID
247 +In RPI, run the below command to get a Gateway ID
297 297  
298 - ifconfig eth0
249 +(% class="box infomessage" %)
250 +(((
251 + ifconfig eth0
252 +)))
299 299  
300 -(% style="text-align:center" %)
301 301  [[image:1651745210205-512.png||height="130" width="621"]]
302 302  
256 +(((
257 +(((
258 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
259 +)))
260 +)))
303 303  
304 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
305 -
306 -(% style="text-align:center" %)
307 307  [[image:1651745267862-321.png||height="526" width="621"]]
308 308  
309 -
310 -
311 -(% style="text-align:center" %)
312 312  [[image:1651745306744-481.png||height="478" width="621"]]
313 313  
314 314  After set up, the status should show not connected as below:
315 315  
316 -(% style="text-align:center" %)
317 317  [[image:1651745366987-458.png||height="363" width="621"]]
318 318  
270 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
319 319  
320 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
272 +Enable SPI and I2C first:
321 321  
322 - Enable SPI and I2C first:
274 +a)SPI needs to be enabled on the Raspberry Pi
323 323  
324 - a)SPI needs to be enabled on the Raspberry Pi
276 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
325 325  
326 - Run sudo raspi-config to open the config window
278 +[[image:1651745476754-240.png||height="234" width="629"]]
327 327  
328 -(% style="text-align:center" %)
329 -[[image:1651745476754-240.png||height="235" width="631"]]
330 -
331 -
332 -(% style="text-align:center" %)
333 333  [[image:image-20220505181135-1.png]]
334 334  
335 -(% style="text-align:center" %)
336 -[[image:image-20220505181135-2.png]]
282 +[[image:image-20220505181135-2.png||height="229" width="622"]]
337 337  
284 +In RPI, Fist: Enter the root account:
338 338  
286 +(((
287 +[[image:1651745583363-614.png||height="151" width="732"]]
288 +)))
339 339  
290 +and then run:
340 340  
341 - In RPI , Fist: Enter root account:
292 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
342 342  
343 -(% style="text-align:center" %)
344 -[[image:1651745583363-614.png]]
294 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
345 345  
296 +(% style="background-color:#dcdcdc" %)./auto_install.sh
346 346  
347 - and then run:
298 +(((
299 +[[image:1651745611629-818.png||height="225" width="729"]]
300 +)))
348 348  
349 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
302 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
350 350  
351 - chmod +x ./auto_install.sh
304 +You can get these output:
352 352  
353 - ./auto_install.sh
354 -
355 -(% style="text-align:center" %)
356 -[[image:1651745611629-818.png]]
357 -
358 -
359 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
360 -
361 - You can get these output:
362 -
363 -(% style="text-align:center" %)
306 +(((
364 364  [[image:1651745657252-173.png||height="426" width="621"]]
308 +)))
365 365  
310 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
366 366  
367 -===== 5.5.2 Config Gateway ID, Frequency Band and Server address =====
312 +(((
313 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
314 +)))
368 368  
369 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
316 +(((
317 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
318 +)))
370 370  
371 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
372 -
373 -(% style="text-align:center" %)
374 374  [[image:1651745709709-887.png||height="820" width="621"]]
375 375  
322 +User can find the TTN v3 server address from:
376 376  
377 - User can find the TTN v3 server address from:
324 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
378 378  
379 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
326 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
380 380  
328 +[[image:1651745838008-820.png||height="650" width="621"]]
381 381  
382 - And the default frequency band is US915 in **global_conf.json** file.
330 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
383 383  
384 -(% style="text-align:center" %)
385 -[[image:1651745838008-820.png||height="650" width="621"]]
332 + 1).Chose your need the name of region frequency.
386 386  
334 +[[image:1651745867516-322.png||height="83" width="740"]]
387 387  
388 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
336 + 2). Use this command to copy it.
389 389  
390 - 1).Chose your need the name of region frequency.
338 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
391 391  
392 -(% style="text-align:center" %)
393 -[[image:1651745867516-322.png]]
340 +[[image:1651745984006-868.png||height="87" width="745"]]
394 394  
342 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
395 395  
396 - 2). Use this command to copy it.
397 397  
398 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
399 399  
400 -(% style="text-align:center" %)
401 -[[image:1651745984006-868.png]]
402 402  
347 +=== 5.2.3 Check result ===
403 403  
404 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
349 +(((
350 +Run below command to restart the dragino_fwd:
351 +)))
405 405  
406 -(% class="wikigeneratedid" %)
407 407  (((
408 -
354 +(% class="box infomessage" %)
355 +(((
356 +sudo systemctl stop draginofwd
409 409  )))
410 410  
411 -===== 5.2.3 Check result =====
359 +(% class="box infomessage" %)
360 +(((
361 +sudo systemctl start draginofwd
362 +)))
363 +)))
412 412  
413 - Run below command to restart the dragino_fwd:
365 +(((
366 +debug check the ruing status of fwd:
367 +)))
414 414  
415 - sudo systemctl stop draginofwd
369 +(((
370 +(% class="box infomessage" %)
371 +(((
372 +sudo systemctl status draginofwd
373 +)))
374 +)))
416 416  
417 - sudo systemctl start draginofwd
376 +[[image:1651746045057-414.png||height="193" width="729"]]
418 418  
419 - debug check the ruing status of fwd:
378 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
420 420  
421 - sudo systemctl status draginofwd
380 +[[image:1651746078253-168.png||height="372" width="621"]]
422 422  
423 -(% style="text-align:center" %)
424 -[[image:1651746045057-414.png]]
425 425  
383 +We can check dragino_fwd running states in RPi by running:
426 426  
427 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
385 +(% class="box infomessage" %)
386 +(((
387 + sudo journalctl -u draginofwd -f
388 +)))
428 428  
429 -(% style="text-align:center" %)
430 -[[image:1651746078253-168.png||height="372" width="621"]]
390 +[[image:1651746111963-838.png||height="184" width="730"]]
431 431  
392 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in **TTN v3 –> Gateway ~-~-> Live data**
432 432  
394 +[[image:1651746139304-966.png||height="326" width="621"]]
433 433  
434 - We can check dragino_fwd running states in RPi by running:
435 435  
436 - //**sudo journalctl -u draginofwd -f**//
397 +=== 5.2.4 Commands to handle service ===
437 437  
438 -(% style="text-align:center" %)
439 -[[image:1651746111963-838.png]]
399 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
400 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
401 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
402 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
403 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
440 440  
441 441  
442 442  
443 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
444 444  
445 -(% style="text-align:center" %)
446 -[[image:1651746139304-966.png||height="326" width="621"]]
408 += 6. Order Info =
447 447  
410 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
448 448  
412 +**~ (% style="color:#0000ff" %)XX:(%%)**
449 449  
450 -===== 5.2.4 Commands to handle service =====
414 +* (% style="color:#0000ff" %)**868** (%%)(For Bands: EU868,IN865)
415 +* (% style="color:#0000ff" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
416 +* (% style="color:#0000ff" %)**470** (%%)(For Band: CN470)
451 451  
452 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
453 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
454 -* **Start** dragino_fwd : sudo systemctl start draginofwd
455 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
456 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
457 457  
458 -=== 6. Order Info ===
459 459  
460 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
461 461  
462 -**~ XX:**
421 += 7. Packing Info =
463 463  
464 -* 868 (For Bands: EU868,IN865)
465 -* 915 (For Bands: US915,AU915,AS923,KR920)
466 -* 470 (For Band: CN470)
423 +(((
424 +
467 467  
468 -=== 7. Packing Info ===
426 +**PG1302 Package Includes**:
427 +)))
469 469  
470 -**~ PG1302 Package Includes**:
471 -
429 +(((
430 +(((
472 472  * PG1302 x 1
473 473  * LoRa Antenna x 1
433 +)))
434 +)))
474 474  
475 -**~ PG1302-PI Package Includes**:
436 +(((
437 +
476 476  
439 +
440 +**PG1302-PI Package Includes**:
441 +)))
442 +
477 477  * PG1302 x 1
478 478  * LoRa Antenna x 1
479 479  * RPi3/4 converter PCB
480 480  * Screws to hole converter PCB on RPI.
481 481  
482 -=== 8. Reference ===
448 +**PG1302-PI Dimension and weight: **
483 483  
484 -* Datasheet, User Manual & Software Download:
450 +* Device Size: 18 x 8 x 4 cm
451 +* Weight: 150g
485 485  
486 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
487 487  
488 488  
489 -=== 9. Support ===
490 490  
491 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
492 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
456 +(((
457 += 8. Support =
493 493  
494 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
459 +(((
460 +If you are experiencing issues and can’t solve, you can send mail to
461 +)))
462 +
463 +(((
464 +[[support@dragino.com>>mailto:support@dragino.com]]
465 +)))
466 +
467 +(((
468 +With your question as detail as possible. We will reply and help you in the shortest.
469 +)))
470 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content