Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 68.1 >
edited by Xiaoling
on 2022/05/06 11:24
To version < 98.37 >
edited by Xiaoling
on 2022/05/14 16:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,34 +3,27 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg||height="391" width="549"]]
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 12  **PG1302 LoRaWAN Concentrator User Manual**
13 13  
14 -[[image:1651796979665-130.png]]
15 15  
16 -Document Version: 1.0.0
9 +**Contents:**
17 17  
18 -Image Version: v1.0
19 -
20 -
21 -
22 -
23 23  {{toc/}}
24 24  
25 25  
26 -=== 1. Introduction ===
14 +(% class="wikigeneratedid" id="H" %)
15 +(((
16 +
17 +)))
27 27  
28 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 += 1. Introduction =
29 29  
21 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
22 +
30 30  (((
31 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
32 32  )))
33 33  
34 34  (((
... ... @@ -39,14 +39,8 @@
39 39  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
40 40  )))
41 41  
42 -(((
43 -(((
44 -
45 -)))
46 -)))
35 +== 1.2 Features ==
47 47  
48 -==== 1.2 Features ====
49 -
50 50  * Base on Semtech SX1302 solution
51 51  * Support Raspberry Pi 3B/3B+/4
52 52  * Up to -140dBm sensitivity
... ... @@ -54,34 +54,28 @@
54 54  * Mini-PCIe Interface
55 55  * Converter board to support Raspberry Pi
56 56  
57 -==== 1.3 General Interfaces ====
44 +== 1.3 General Interfaces ==
58 58  
59 59  * SPI interface for LoRa
60 60  * Power Input: 5v, 1A
61 61  * 1 x I-PEX for LoRa
62 62  
63 -==== 1.4 Pin Mapping ====
50 +== 1.4 Pin Mapping ==
64 64  
65 65   [[image:1651743282627-547.png||height="402" width="425"]]
66 66  
54 +== 1.5 LEDs ==
67 67  
56 + TX: Blink when transmit a packet
57 + RX: Blink when receive a packet
58 + Config: Always ON
68 68  
69 -==== 1.5 LEDs ====
60 +== 1.6 Power Consumption ==
70 70  
71 - TX: Blink when transmit a packet
62 + TBD
72 72  
73 - RX: Blink when receive a packet
64 +== 1.7 Applications ==
74 74  
75 - Config: Always ON
76 -
77 -
78 -==== 1.6 Power Consumption ====
79 -
80 - TBD
81 -
82 -
83 -==== 1.7 Applications ====
84 -
85 85  * Smart Buildings & Home Automation
86 86  * Logistics and Supply Chain Management
87 87  * Smart Metering
... ... @@ -89,47 +89,38 @@
89 89  * Smart Cities
90 90  * Smart Factory
91 91  
92 -=== 2. Example: Set up as LoRaWAN gateway. ===
73 += 2. Example: Set up as LoRaWAN gateway. =
93 93  
94 -==== 2.1 System structure ====
75 +== 2.1 System structure ==
95 95  
96 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
77 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
97 97  
98 -(% style="text-align:center" %)
99 99  [[image:1651743698677-436.png||height="457" width="686"]]
100 100  
81 +== 2.2 Hardware Installation ==
101 101  
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
102 102  
103 -==== 2.2 Hardware Installation ====
104 -
105 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
106 -
107 -(% style="text-align:center" %)
108 108  [[image:1651743803032-803.png]]
109 109  
87 += 3. Install the software? =
110 110  
89 +There are two ways to install software in RPi4 to use PG1302.
111 111  
112 -=== 3. Install the software? ===
113 -
114 - There are two ways to install software in RPi4 to use PG1302.
115 -
116 116  * Flash SD card with Dragino pre-build image which support Web UI.
117 117  * Install lora packet forwarder in existing RPi OS.
118 118  
119 -=== 4. Flash with pre-build image ===
94 += 4. Flash with pre-build image =
120 120  
121 -==== 4.1 Download the dragino image for RPI ====
96 +== 4.1 Download the dragino image for RPI ==
122 122  
123 - Download PG1302_for_Rpi4_64_with_webui from
98 +Download PG1302_for_Rpi4_64_with_webui from
99 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
124 124  
125 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
101 +== 4.2 Flash the image to SD card ==
126 126  
103 +Flash the image to SD card:
127 127  
128 -==== 4.2 Flash the image to SD card ====
129 -
130 - Flash the image to SD card:
131 -
132 -(% style="text-align:center" %)
133 133  [[image:1651744119133-233.png||height="373" width="621"]]
134 134  
135 135   Note: Download the flash tool following this link
... ... @@ -136,357 +136,327 @@
136 136  
137 137   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
138 138  
111 +== 4.3 Access the Linux console ==
139 139  
140 -==== 4.3 Access the Linux console. ====
113 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
141 141  
142 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
143 -
144 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
145 -
146 -(% style="text-align:center" %)
147 147  [[image:1651744193675-591.png||height="450" width="466"]]
148 148  
117 +The account details for Web Login are:
149 149  
150 - The account details for Web Login are:
119 +(((
120 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
121 +)))
151 151  
152 -**~ User Name: root**
123 +(((
124 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
125 +)))
153 153  
154 -**~ Password:   dragino**
127 +(((
128 +
129 +)))
155 155  
131 +(((
132 +**~ (% style="color:#0000ff" %)Backup account(%%)**
133 +)))
156 156  
157 -**~ Backup account**
135 +(((
136 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
137 +)))
158 158  
159 -**~ Pi/dragino**
139 +After log in, you will be in the Linux console and type command here.
160 160  
161 -
162 - After log in, you will be in the Linux console and type command here.
163 -
164 -(% style="text-align:center" %)
165 165  [[image:1651744358515-107.png||height="366" width="581"]]
166 166  
143 +== 4.4 Access the WebUI of RPi4. ==
167 167  
168 -==== 4.4 Access the WebUI of RPi4. ====
145 +=== 4.4.1 Home page ===
169 169  
170 -===== 4.4.1 Home page =====
147 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
148 +You will see the login interface of RPI as shown below.
149 +The account details for Web Login are:
171 171  
172 - Open a browser on the PC and type the RPI ip address
151 +(((
152 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
153 +(% style="color:#0000ff" %)** Password:   dragino**
154 +)))
173 173  
174 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
175 -
176 -
177 - You will see the login interface of RPI as shown below.
178 -
179 - The account details for Web Login are:
180 -
181 -**~ User Name: root**
182 -
183 -**~ Password:   dragino**
184 -
185 -(% style="text-align:center" %)
186 186  [[image:1651744457761-993.png||height="352" width="621"]]
187 187  
158 +=== 4.4.2 LoRa Page ===
188 188  
189 -===== 4.4.2 LoRa Page =====
160 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
190 190  
191 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
192 -
193 -(% style="text-align:center" %)
194 194  [[image:1651744554845-970.png||height="328" width="621"]]
195 195  
164 +Different PG1302 hardware version can support different frequency range:
196 196  
197 - Different PG1302 hardware version can support different frequency range:
166 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
198 198  
199 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
168 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
200 200  
201 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
170 +After user choose the frequency plan, he can see the actually frequency in used by checking the
202 202  
172 +page LogRead ~-~-> LoRa Log
203 203  
204 - After user choose the frequency plan, he can see the actually frequency in used by checking the
174 +Note *: See this instruction for how to customize frequency band
205 205  
206 - page LogRead ~-~-> LoRa Log
176 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
207 207  
208 - Note *: See this instruction for how to customize frequency band
178 +=== 4.4.3 LoRaWAN Page ===
209 209  
210 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
180 +==== 4.4.3.1 Semtech UDP ====
211 211  
212 -
213 -===== 4.4.3 LoRaWAN Page =====
214 -
215 -====== 4.4.3.1 Semtech UDP ======
216 -
217 -
218 -(% style="text-align:center" %)
219 219  [[image:1651744767914-283.png||height="352" width="621"]]
220 220  
184 +Note *: See this instruction for how to configure TTN.
221 221  
186 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
222 222  
223 - Note *: See this instruction for how to configure TTN.
188 +==== 4.4.3.2 Basic Station ====
224 224  
225 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
226 -
227 -
228 -====== 4.4.3.2 Basic Station ======
229 -
230 -(% style="text-align:center" %)
231 231  [[image:1651744890629-683.png||height="380" width="621"]]
232 232  
192 +Note *: See this instruction for how to configure TTN.
233 233  
234 - Note *: See this instruction for how to configure TTN.
194 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
235 235  
236 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
196 +=== 4.4.4 LogRead ===
237 237  
198 +==== 4.4.4.1 LoRa Log ====
238 238  
239 -===== 4.4.4 LogRead =====
240 -
241 -====== 4.4.4.1 LoRa Log ======
242 -
243 -(% style="text-align:center" %)
244 244  [[image:1651744955955-452.png||height="571" width="621"]]
245 245  
202 +Show the frequency for LoRa Radio and traffics.
246 246  
247 - Show the frequency for LoRa Radio and traffics.
204 +==== 4.4.4.2 System Log ====
248 248  
206 +Show system log.
249 249  
250 -====== 4.4.4.2 System Log ======
251 -
252 - Show system log.
253 -
254 -(% style="text-align:center" %)
255 255  [[image:1651745003470-264.png||height="477" width="621"]]
256 256  
210 +==== 4.4.4.3 Record Log ====
257 257  
212 +**Record the system log.**
258 258  
259 -====== 4.4.4.3 Record Log ======
260 -
261 -**~ Record the system log.**
262 -
263 -(% style="text-align:center" %)
264 264  [[image:1651745069814-662.png||height="144" width="621"]]
265 265  
216 += 5. Install stand alone LoRa Packet Forwarder. =
266 266  
267 -=== 5. Install stand alone LoRa Packet Forwarder. ===
218 +== 5.1 OS requirement ==
268 268  
269 -==== 5.1 OS requirement ====
220 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
270 270  
271 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
272 -
273 - pi@raspberrypi:~~$ cat /etc/os-release
274 -
222 +(% class="box" %)
223 +(((
224 + pi@raspberrypi:~~$ cat /etc/os-release
275 275   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
276 -
277 277   NAME="Raspbian GNU/Linux"
278 -
279 279   VERSION_ID="8"
280 -
281 281   VERSION="8 (jessie)"
282 -
283 283   ID=raspbian
284 -
285 285   ID_LIKE=debian
286 -
287 287   HOME_URL="http:~/~/www.raspbian.org/"
288 -
289 289   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
290 -
291 291   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
234 +)))
292 292  
236 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
293 293  
294 -==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
238 +In RPI, run below command to get a Gateway ID
295 295  
296 - In RPI, run below command to get a Gateway ID
240 +(% class="box infomessage" %)
241 +(((
242 + ifconfig eth0
243 +)))
297 297  
298 - ifconfig eth0
299 -
300 -(% style="text-align:center" %)
301 301  [[image:1651745210205-512.png||height="130" width="621"]]
302 302  
247 +(((
248 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
249 +)))
303 303  
304 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
305 -
306 -(% style="text-align:center" %)
307 307  [[image:1651745267862-321.png||height="526" width="621"]]
308 308  
309 -
310 -
311 -(% style="text-align:center" %)
312 312  [[image:1651745306744-481.png||height="478" width="621"]]
313 313  
314 314  After set up, the status should show not connected as below:
315 315  
316 -(% style="text-align:center" %)
317 317  [[image:1651745366987-458.png||height="363" width="621"]]
318 318  
259 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
319 319  
261 +Enable SPI and I2C first:
320 320  
321 -===== 5.2.1 Download and install LoRaWAN packet forwarder =====
263 +a)SPI needs to be enabled on the Raspberry Pi
322 322  
323 - Enable SPI and I2C first:
265 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
324 324  
325 - a)SPI needs to be enabled on the Raspberry Pi
267 +[[image:1651745476754-240.png||height="234" width="629"]]
326 326  
327 - Run sudo raspi-config to open the config window
328 -
329 -(% style="text-align:center" %)
330 -[[image:1651745476754-240.png||height="235" width="631"]]
331 -
332 -
333 -(% style="text-align:center" %)
334 334  [[image:image-20220505181135-1.png]]
335 335  
336 -(% style="text-align:center" %)
337 -[[image:image-20220505181135-2.png]]
271 +[[image:image-20220505181135-2.png||height="229" width="622"]]
338 338  
273 +In RPI , Fist: Enter root account:
339 339  
275 +[[image:1651745583363-614.png||height="151" width="732"]]
340 340  
341 341  
342 - In RPI , Fist: Enter root account:
278 +and then run:
343 343  
344 -(% style="text-align:center" %)
345 -[[image:1651745583363-614.png]]
280 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
346 346  
282 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
347 347  
348 - and then run:
284 +(% style="background-color:#dcdcdc" %)./auto_install.sh
349 349  
350 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
286 +[[image:1651745611629-818.png||height="225" width="729"]]
351 351  
352 - chmod +x ./auto_install.sh
288 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
353 353  
354 - ./auto_install.sh
290 +You can get these output:
355 355  
356 -(% style="text-align:center" %)
357 -[[image:1651745611629-818.png]]
358 -
359 -
360 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
361 -
362 - You can get these output:
363 -
364 -(% style="text-align:center" %)
365 365  [[image:1651745657252-173.png||height="426" width="621"]]
366 366  
294 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
367 367  
368 -===== 5.5.2 Config Gateway ID, Frequency Band and Server address =====
296 +(((
297 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
298 +)))
369 369  
370 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
300 +(((
301 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
302 +)))
371 371  
372 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
373 -
374 -(% style="text-align:center" %)
375 375  [[image:1651745709709-887.png||height="820" width="621"]]
376 376  
306 +User can find the TTN v3 server address from:
377 377  
378 - User can find the TTN v3 server address from:
308 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
379 379  
380 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
310 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
381 381  
382 -
383 - And the default frequency band is US915 in **global_conf.json** file.
384 -
385 -(% style="text-align:center" %)
386 386  [[image:1651745838008-820.png||height="650" width="621"]]
387 387  
314 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
388 388  
389 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
316 + 1).Chose your need the name of region frequency.
390 390  
391 - 1).Chose your need the name of region frequency.
318 +[[image:1651745867516-322.png||height="83" width="740"]]
392 392  
393 -(% style="text-align:center" %)
394 -[[image:1651745867516-322.png]]
395 -
396 -
397 397   2). Use this command to copy it.
398 398  
399 399   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
400 400  
401 -(% style="text-align:center" %)
402 -[[image:1651745984006-868.png]]
324 +[[image:1651745984006-868.png||height="87" width="745"]]
403 403  
326 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
404 404  
405 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
328 +=== 5.2.3 Check result ===
406 406  
407 -===== =====
330 +(((
331 +Run below command to restart the dragino_fwd:
332 +)))
408 408  
409 -===== 5.2.3 Check result =====
334 +(((
335 +(% class="box infomessage" %)
336 +(((
337 +sudo systemctl stop draginofwd
338 +)))
410 410  
411 - Run below command to restart the dragino_fwd:
340 +(% class="box infomessage" %)
341 +(((
342 +sudo systemctl start draginofwd
343 +)))
344 +)))
412 412  
413 - sudo systemctl stop draginofwd
346 +(((
347 +debug check the ruing status of fwd:
348 +)))
414 414  
415 - sudo systemctl start draginofwd
350 +(((
351 +(% class="box infomessage" %)
352 +(((
353 +sudo systemctl status draginofwd
354 +)))
355 +)))
416 416  
417 - debug check the ruing status of fwd:
357 +[[image:1651746045057-414.png||height="193" width="729"]]
418 418  
419 - sudo systemctl status draginofwd
359 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
420 420  
421 -(% style="text-align:center" %)
422 -[[image:1651746045057-414.png]]
423 -
424 -
425 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
426 -
427 -(% style="text-align:center" %)
428 428  [[image:1651746078253-168.png||height="372" width="621"]]
429 429  
430 430  
364 +We can check dragino_fwd running states in RPi by running:
431 431  
432 - We can check dragino_fwd running states in RPi by running:
366 +(% class="box infomessage" %)
367 +(((
368 +*
369 +** sudo journalctl -u draginofwd -f
370 +)))
433 433  
434 - //**sudo journalctl -u draginofwd -f**//
372 +[[image:1651746111963-838.png||height="184" width="730"]]
435 435  
436 -(% style="text-align:center" %)
437 -[[image:1651746111963-838.png]]
374 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
438 438  
439 -
440 -
441 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
442 -
443 -(% style="text-align:center" %)
444 444  [[image:1651746139304-966.png||height="326" width="621"]]
445 445  
378 +=== 5.2.4 Commands to handle service ===
446 446  
380 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
381 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
382 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
383 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
384 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
447 447  
448 -===== 5.2.4 Commands to handle service =====
386 += 6. Order Info =
449 449  
450 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
451 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
452 -* **Start** dragino_fwd : sudo systemctl start draginofwd
453 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
454 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
388 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
455 455  
456 -=== 6. Order Info ===
390 +**~ (% style="color:#0000ff" %)XX:(%%)**
457 457  
458 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
392 +* (% style="color:#0000ff" %)868 (%%)(For Bands: EU868,IN865)
393 +* (% style="color:#0000ff" %)915 (%%)(For Bands: US915,AU915,AS923,KR920)
394 +* (% style="color:#0000ff" %)470 (%%)(For Band: CN470)
459 459  
460 -**~ XX:**
396 += 7. Packing Info =
461 461  
462 -* 868 (For Bands: EU868,IN865)
463 -* 915 (For Bands: US915,AU915,AS923,KR920)
464 -* 470 (For Band: CN470)
398 +(((
399 +**PG1302 Package Includes**:
400 +)))
465 465  
466 -=== 7. Packing Info ===
467 -
468 -**~ PG1302 Package Includes**:
469 -
402 +(((
470 470  * PG1302 x 1
471 -* LoRa Antenna x 1
404 +)))
472 472  
473 -**~ PG1302-PI Package Includes**:
474 -
475 -* PG1302 x 1
406 +(((
476 476  * LoRa Antenna x 1
477 -* RPi3/4 converter PCB
478 -* Screws to hole converter PCB on RPI.
408 +)))
479 479  
480 -=== 8. Reference ===
410 +(((
411 +**PG1302-PI Package Includes**:
412 +)))
481 481  
482 -* Datasheet, User Manual & Software Download:
414 +* (((
415 +PG1302 x 1
416 +)))
417 +* (((
418 +LoRa Antenna x 1
419 +)))
420 +* (((
421 +RPi3/4 converter PCB
422 +)))
483 483  
484 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
424 +(((
425 +* Screws to hole converter PCB on RPI.
485 485  
427 += 8. Support =
486 486  
487 -9. Support
429 +If you are experiencing issues and can’t solve, you can send mail to
488 488  
489 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
490 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
431 +[[support@dragino.com>>mailto:support@dragino.com]]
491 491  
492 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
433 +With your question as detail as possible. We will reply and help you in the shortest.
434 +)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0