Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 67.1 >
edited by Xiaoling
on 2022/05/06 11:06
To version < 108.6 >
edited by Xiaoling
on 2022/07/28 14:25
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,52 +3,34 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
7 +**Table of Contents：**
9 9  
9 +{{toc/}}
10 10  
11 11  
12 -**PG1302 LoRaWAN Concentrator User Manual**
12 +(% class="wikigeneratedid" id="H" %)
13 +(((
14 +
15 +)))
13 13  
14 -[[image:1651796979665-130.png]]
17 += **1. Introduction** =
15 15  
16 -Document Version: 1.0.0
19 +== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
17 17  
18 -Image Version: v1.0
19 19  
22 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
20 20  
24 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
21 21  
26 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
22 22  
23 -{{toc/}}
24 24  
25 25  
26 -=== 1. Introduction ===
30 +== **1.2 Features** ==
27 27  
28 -==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
29 -
30 -(((
31 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
32 -)))
33 -
34 -(((
35 -The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
36 -)))
37 -
38 -(((
39 -PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
40 -)))
41 -
42 -(((
43 -(((
44 -
45 -)))
46 -)))
47 -
48 -1.2 Features
49 -
50 50  * Base on Semtech SX1302 solution
51 51  * Support Raspberry Pi 3B/3B+/4
52 52  * Up to -140dBm sensitivity
... ... @@ -54,34 +54,47 @@
54 54  * Mini-PCIe Interface
55 55  * Converter board to support Raspberry Pi
56 56  
57 -1.3 General Interfaces
58 58  
40 +
41 +
42 +
43 +== **1.3 General Interfaces for PG1302** ==
44 +
59 59  * SPI interface for LoRa
60 60  * Power Input: 5v, 1A
61 61  * 1 x I-PEX for LoRa
62 62  
63 -1.4 Pin Mapping
64 64  
50 +
51 +
52 +
53 +== **1.4 Pin Mapping** ==
54 +
55 +
65 65   [[image:1651743282627-547.png||height="402" width="425"]]
66 66  
67 67  
68 68  
69 -1.5 LEDs
60 +== **1.5 LEDs** ==
70 70  
71 - TX: Blink when transmit a packet
72 72  
73 - RX: Blink when receive a packet
63 + TX: Blink when transmit a packet
64 + RX: Blink when receive a packet
65 + Config: Always ON
74 74  
75 - Config: Always ON
76 76  
77 77  
78 -1.6 Power Consumption
69 +== **1.6 Power Consumption** ==
79 79  
80 - TBD
81 81  
72 +<300mA @ 3.3v.
82 82  
83 -1.7 Applications
74 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
84 84  
76 +
77 +
78 +== **1.7 Applications** ==
79 +
85 85  * Smart Buildings & Home Automation
86 86  * Logistics and Supply Chain Management
87 87  * Smart Metering
... ... @@ -89,403 +89,470 @@
89 89  * Smart Cities
90 90  * Smart Factory
91 91  
92 -2. Example: Set up as LoRaWAN gateway.
93 93  
94 - 2.1 System structure
95 95  
96 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
97 97  
98 -(% style="text-align:center" %)
90 +
91 += **2. Example: Set up as LoRaWAN gateway.** =
92 +
93 +== **2.1 System structure** ==
94 +
95 +
96 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
97 +
99 99  [[image:1651743698677-436.png||height="457" width="686"]]
100 100  
101 101  
102 102  
103 -2.2 Hardware Installation
102 +== **2.2 Hardware Installation** ==
104 104  
105 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
106 106  
107 -(% style="text-align:center" %)
108 -[[image:1651743803032-803.png]]
105 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
109 109  
107 +[[image:image-20220621104746-1.png||height="381" width="451"]]
110 110  
111 111  
112 -3. Install the software?
113 113  
114 - There are two ways to install software in RPi4 to use PG1302.
111 += **3. Install the software?** =
115 115  
116 -* Flash SD card with Dragino pre-build image which support Web UI.
117 -* Install lora packet forwarder in existing RPi OS.
113 +There are two ways to install the software in RPi4 to use PG1302.
118 118  
119 -4. Flash with pre-build image
115 +* Flash SD card with Dragino pre-build image which supports Web UI.
116 +* Install Lora packet forwarder in existing RPi OS.
120 120  
121 - 4.1 Download the dragino image for RPI
122 122  
123 - Download PG1302_for_Rpi4_64_with_webui from
124 124  
125 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
126 126  
127 127  
128 -4.2 Flash the image to SD card
122 += **4. Flash with pre-build image** =
129 129  
130 - Flash the image to SD card:
124 +== **4.1 Download the dragino image for RPI** ==
131 131  
132 -(% style="text-align:center" %)
133 -[[image:1651744119133-233.png||height="373" width="621"]]
134 134  
135 - Note: Download the flash tool following this link
127 +(((
128 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
129 +)))
136 136  
137 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
138 138  
139 139  
140 -4.3 Access the Linux console.
133 +== **4.2 Flash the image to an SD card** ==
141 141  
142 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
143 143  
144 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
136 +Flash the image to the SD card:
145 145  
146 -(% style="text-align:center" %)
147 -[[image:1651744193675-591.png||height="450" width="466"]]
138 +[[image:1651744119133-233.png||height="373" width="621"]]
148 148  
149 149  
150 - The account details for Web Login are:
141 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
151 151  
152 -**~ User Name: root**
153 153  
154 -**~ Password:   dragino**
155 155  
145 +== **4.3 Access the Linux console** ==
156 156  
157 -**~ Backup account**
158 158  
159 -**~ Pi/dragino**
148 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
160 160  
150 +[[image:1651744193675-591.png||height="450" width="466"]]
161 161  
162 - After log in, you will be in the Linux console and type command here.
152 +The account details for Web Login are:
163 163  
164 -(% style="text-align:center" %)
165 -[[image:1651744358515-107.png||height="366" width="581"]]
154 +(((
155 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
156 +)))
166 166  
158 +(((
159 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
160 +)))
167 167  
168 - 4.4 Access the WebUI of RPi4.
162 +(((
163 +
164 +)))
169 169  
170 - 4.4.1 Home page
166 +(((
167 +**~ (% style="color:#0000ff" %)Backup account(%%)**
168 +)))
171 171  
172 - Open a browser on the PC and type the RPI ip address
170 +(((
171 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
173 173  
174 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
173 +
174 +)))
175 175  
176 +After logging in, you will be in the Linux console and type the command here.
176 176  
177 - You will see the login interface of RPI as shown below.
178 +[[image:1651744358515-107.png||height="366" width="581"]]
178 178  
179 - The account details for Web Login are:
180 180  
181 -**~ User Name: root**
182 182  
183 -**~ Password:   dragino**
182 +== **4.4 Access the WebUI of RPi4.** ==
184 184  
185 -(% style="text-align:center" %)
186 -[[image:1651744457761-993.png||height="352" width="621"]]
184 +=== **4.4.1 Home page** ===
187 187  
188 188  
189 -4.4.2 LoRa Page
187 +Open a browser on the PC and type the RPI ip address [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by the uplink router)
188 +You will see the login interface of RPI as shown below.
189 +The account details for Web Login are:
190 190  
191 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
191 +(((
192 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
193 +(% style="color:#0000ff" %)** Password:   dragino**
192 192  
193 -(% style="text-align:center" %)
194 -[[image:1651744554845-970.png||height="328" width="621"]]
195 +
196 +)))
195 195  
198 +[[image:1651744457761-993.png||height="352" width="621"]]
196 196  
197 - Different PG1302 hardware version can support different frequency range:
198 198  
199 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
200 200  
201 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
202 +=== **4.4.2 LoRa Page** ===
202 202  
203 203  
204 - After user choose the frequency plan, he can see the actually frequency in used by checking the
205 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
205 205  
206 - page LogRead ~-~-> LoRa Log
207 +[[image:1651744554845-970.png||height="328" width="621"]]
207 207  
208 - Note *: See this instruction for how to customize frequency band
209 +Different PG1302 hardware version can support different frequency range:
209 209  
210 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
211 +➢** (% style="color:red" %)868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.(%%)**
211 211  
213 +➢ (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
212 212  
213 -4.4.3 LoRaWAN Page
215 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:blue" %)**page LogRead ~-~-> LoRa Log**
214 214  
215 - 4.4.3.1 Semtech UDP
217 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
216 216  
217 217  
218 -(% style="text-align:center" %)
219 -[[image:1651744767914-283.png||height="352" width="621"]]
220 220  
221 +=== **4.4.3 LoRaWAN Page** ===
221 221  
223 +==== **4.4.3.1 Semtech UDP** ====
222 222  
223 - Note *: See this instruction for how to configure TTN.
224 224  
225 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
226 +[[image:1651744767914-283.png||height="352" width="621"]]
226 226  
228 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
227 227  
228 -4.4.3.2 Basic Station
229 229  
230 -(% style="text-align:center" %)
231 +
232 +==== **4.4.3.2 Basic Station** ====
233 +
234 +
231 231  [[image:1651744890629-683.png||height="380" width="621"]]
232 232  
233 233  
234 - Note *: See this instruction for how to configure TTN.
238 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
235 235  
236 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
237 237  
238 238  
239 -4.4.4 LogRead
242 +=== **4.4.4 LogRead** ===
240 240  
241 - 4.4.4.1 LoRa Log
244 +==== **4.4.4.1 LoRa Log** ====
242 242  
243 -(% style="text-align:center" %)
246 +
244 244  [[image:1651744955955-452.png||height="571" width="621"]]
245 245  
249 +Show the frequency for LoRa Radio and traffics.
246 246  
247 - Show the frequency for LoRa Radio and traffics.
248 248  
249 249  
250 -4.4.4.2 System Log
253 +==== **4.4.4.2 System Log** ====
251 251  
252 - Show system log.
253 253  
254 -(% style="text-align:center" %)
256 +Show system log.
257 +
255 255  [[image:1651745003470-264.png||height="477" width="621"]]
256 256  
257 257  
258 258  
259 -4.4.4.3 Record Log
262 +==== **4.4.4.3 Record Log** ====
260 260  
261 261  
262 262  **Record the system log.**
263 263  
264 -(% style="text-align:center" %)
265 265  [[image:1651745069814-662.png||height="144" width="621"]]
266 266  
267 267  
268 -5. Install stand alone LoRa Packet Forwarder.
269 269  
270 - 5.1 OS requirement
271 += **5. Install stand-alone LoRa Packet Forwarder.** =
271 271  
272 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
273 +== **5.1 OS requirement** ==
273 273  
274 - pi@raspberrypi:~~$ cat /etc/os-release
275 275  
276 - PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
276 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
277 277  
278 +(% class="box" %)
279 +(((
280 + pi@raspberrypi:~~$ cat /etc/os-release
281 + PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
278 278   NAME="Raspbian GNU/Linux"
279 -
280 280   VERSION_ID="8"
281 -
282 282   VERSION="8 (jessie)"
283 -
284 284   ID=raspbian
285 -
286 286   ID_LIKE=debian
287 -
288 288   HOME_URL="http:~/~/www.raspbian.org/"
289 -
290 290   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
291 -
292 292   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
293 293  
291 +
292 +)))
294 294  
295 -5.2 Get Gateway ID in Raspberry and input this in TTN v3.
296 296  
297 - In RPI, run below command to get a Gateway ID
298 298  
299 - ifconfig eth0
296 +== **5.2 Get Gateway ID in Raspberry and input this in TTN v3** ==
300 300  
301 -(% style="text-align:center" %)
302 -[[image:1651745210205-512.png||height="130" width="621"]]
303 303  
299 +In RPI, run the below command to get a Gateway ID
304 304  
305 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
301 +(% class="box infomessage" %)
302 +(((
303 +**~ ifconfig eth0**
304 +)))
306 306  
307 -(% style="text-align:center" %)
308 -[[image:1651745267862-321.png||height="526" width="621"]]
306 +[[image:1651745210205-512.png||height="130" width="621"]]
309 309  
310 310  
309 +(((
310 +(((
311 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
311 311  
312 -(% style="text-align:center" %)
313 +
314 +)))
315 +)))
316 +
317 +[[image:1651745267862-321.png||height="526" width="621"]]
318 +
313 313  [[image:1651745306744-481.png||height="478" width="621"]]
314 314  
321 +
315 315  After set up, the status should show not connected as below:
316 316  
317 -(% style="text-align:center" %)
318 318  [[image:1651745366987-458.png||height="363" width="621"]]
319 319  
320 320  
321 321  
322 -5.2.1 Download and install LoRaWAN packet forwarder
328 +=== **5.2.1 Download and install LoRaWAN packet forwarder** ===
323 323  
324 - Enable SPI and I2C first:
325 325  
326 - a)SPI needs to be enabled on the Raspberry Pi
331 +Enable SPI and I2C first:
327 327  
328 - Run sudo raspi-config to open the config window
333 +a)  SPI needs to be enabled on the Raspberry Pi
329 329  
330 -(% style="text-align:center" %)
331 -[[image:1651745476754-240.png||height="235" width="631"]]
335 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
332 332  
337 +[[image:1651745476754-240.png||height="234" width="629"]]
333 333  
334 -(% style="text-align:center" %)
335 335  [[image:image-20220505181135-1.png]]
336 336  
337 -(% style="text-align:center" %)
338 -[[image:image-20220505181135-2.png]]
341 +[[image:image-20220505181135-2.png||height="229" width="622"]]
339 339  
340 340  
341 341  
345 +In RPI, Fist: Enter the root account:
342 342  
343 - In RPI , Fist: Enter root account:
347 +(((
348 +[[image:1651745583363-614.png||height="151" width="732"]]
344 344  
345 -(% style="text-align:center" %)
346 -[[image:1651745583363-614.png]]
350 +
351 +)))
347 347  
353 +and then run:
348 348  
349 - and then run:
355 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
350 350  
351 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
357 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
352 352  
353 - chmod +x ./auto_install.sh
359 +(% style="background-color:#dcdcdc" %)./auto_install.sh
354 354  
355 - ./auto_install.sh
361 +(((
362 +[[image:1651745611629-818.png||height="225" width="729"]]
363 +)))
356 356  
357 -(% style="text-align:center" %)
358 -[[image:1651745611629-818.png]]
365 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
359 359  
367 +You can get these output:
360 360  
361 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
362 -
363 - You can get these output:
364 -
365 -(% style="text-align:center" %)
369 +(((
366 366  [[image:1651745657252-173.png||height="426" width="621"]]
367 367  
368 368  
369 -5.5.2 Config Gateway ID, Frequency Band and Server address
373 +
374 +)))
370 370  
371 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
376 +=== **5.2.2 Config Gateway ID, Frequency Band and Server address** ===
372 372  
373 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
374 374  
375 -(% style="text-align:center" %)
376 -[[image:1651745709709-887.png||height="820" width="621"]]
379 +(((
380 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
381 +)))
377 377  
383 +(((
384 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
378 378  
379 - User can find the TTN v3 server address from:
386 +
387 +)))
380 380  
381 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
389 +[[image:1651745709709-887.png||height="820" width="621"]]
382 382  
383 383  
384 - And the default frequency band is US915 in **global_conf.json** file.
392 +User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
385 385  
386 -(% style="text-align:center" %)
394 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
395 +
387 387  [[image:1651745838008-820.png||height="650" width="621"]]
388 388  
389 389  
390 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
399 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
391 391  
392 - 1).Chose your need the name of region frequency.
401 +**~ 1). Chose your need the name of region frequency.**
393 393  
394 -(% style="text-align:center" %)
395 -[[image:1651745867516-322.png]]
403 +[[image:1651745867516-322.png||height="83" width="740"]]
396 396  
397 397  
398 - 2). Use this command to copy it.
406 +*
407 +** 2). Use this command to copy it.
399 399  
400 400   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
401 401  
402 -(% style="text-align:center" %)
403 -[[image:1651745984006-868.png]]
411 +[[image:1651745984006-868.png||height="87" width="745"]]
404 404  
413 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
405 405  
406 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
407 407  
408 -5.2.3 Check result
409 409  
410 - Run below command to restart the dragino_fwd:
417 +=== **5.2.3 Check result** ===
411 411  
412 - sudo systemctl stop draginofwd
413 413  
414 - sudo systemctl start draginofwd
420 +(((
421 +Run below command to restart the dragino_fwd:
422 +)))
415 415  
416 - debug check the ruing status of fwd:
424 +(((
425 +(% class="box infomessage" %)
426 +(((
427 +**sudo systemctl stop draginofwd**
428 +)))
417 417  
418 - sudo systemctl status draginofwd
430 +(% class="box infomessage" %)
431 +(((
432 +**sudo systemctl start draginofwd**
433 +)))
434 +)))
419 419  
420 -(% style="text-align:center" %)
421 -[[image:1651746045057-414.png]]
422 422  
437 +(((
438 +debug check the ruing status of fwd:
439 +)))
423 423  
424 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
441 +(((
442 +(% class="box infomessage" %)
443 +(((
444 +**sudo systemctl status draginofwd**
445 +)))
446 +)))
425 425  
426 -(% style="text-align:center" %)
427 -[[image:1651746078253-168.png||height="372" width="621"]]
448 +[[image:1651746045057-414.png||height="193" width="729"]]
428 428  
429 429  
430 430  
431 - We can check dragino_fwd running states in RPi by running:
452 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
432 432  
433 - //**sudo journalctl -u draginofwd -f**//
434 434  
435 -(% style="text-align:center" %)
436 -[[image:1651746111963-838.png]]
455 +[[image:1651746078253-168.png||height="372" width="621"]]
437 437  
438 438  
439 439  
440 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
459 +We can check dragino_fwd running states in RPi by running:
441 441  
442 -(% style="text-align:center" %)
461 +(% class="box infomessage" %)
462 +(((
463 +**~ sudo journalctl -u draginofwd -f**
464 +)))
465 +
466 +[[image:1651746111963-838.png||height="184" width="730"]]
467 +
468 +
469 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
470 +
443 443  [[image:1651746139304-966.png||height="326" width="621"]]
444 444  
445 445  
446 446  
447 -5.2.4 Commands to handle service
475 +=== **5.2.4 Commands to handle service** ===
448 448  
449 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
450 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
451 -* **Start** dragino_fwd : sudo systemctl start draginofwd
452 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
453 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
454 454  
455 -6. Order Info
478 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
479 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
480 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
481 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
482 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
456 456  
457 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
458 458  
459 -**~ XX:**
460 460  
461 -* 868 (For Bands: EU868,IN865)
462 -* 915 (For Bands: US915,AU915,AS923,KR920)
463 -* 470 (For Band: CN470)
464 464  
465 -7. Packing Info
487 += **6. Order Info** =
466 466  
467 -**~ PG1302 Package Includes**:
468 468  
490 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
491 +
492 +**~ (% style="color:#0000ff" %)XX:(%%)**
493 +
494 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
495 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
496 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
497 +
498 +
499 +
500 +
501 +
502 += **7. Packing Info** =
503 +
504 +(((
505 +
506 +
507 +**PG1302 Package Includes**:
508 +)))
509 +
510 +(((
511 +(((
469 469  * PG1302 x 1
470 470  * LoRa Antenna x 1
514 +)))
515 +)))
471 471  
472 -**~ PG1302-PI Package Includes**:
517 +(((
518 +
473 473  
520 +
521 +**PG1302-PI Package Includes**:
522 +)))
523 +
474 474  * PG1302 x 1
475 475  * LoRa Antenna x 1
476 476  * RPi3/4 converter PCB
477 477  * Screws to hole converter PCB on RPI.
478 478  
479 -8. Reference
529 +**PG1302-PI Dimension and weight: **
480 480  
481 -* Datasheet, User Manual & Software Download:
531 +* Device Size: 18 x 8 x 4 cm
532 +* Weight: 150g
482 482  
483 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
484 484  
485 485  
486 -9. Support
487 487  
488 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
489 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
490 490  
491 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
538 +(((
539 += **8. Support** =
540 +
541 +
542 +(((
543 +If you are experiencing issues and can't solve, you can send mail to
544 +)))
545 +
546 +(((
547 +[[support@dragino.com>>mailto:support@dragino.com]]
548 +)))
549 +
550 +(((
551 +With your question as detail as possible. We will reply and help you in the shortest.
552 +)))
553 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0